Hi All
I'm new to this, so go easy on me!
I've searched the archives and not found what I'm looking for, so maybe
somebody out there can explain it in terms so that I can understand ;-)
Having just moved a list over from Yahoo, I'd like to be able to still
reach users who are set to No Email.
Martin,
Your REGEXP can be really simple. In the Topics section of the Admin
page, enter some keywords for your REGEXP, , like ORG. Then, when you
want to send a message only to those that are subscribed to the 'ORG'
topic, include as the first line of your message, either:
Subject: ORG
OR
On Mar 16, 2005, at 23:42, Martin Dennett wrote:
Having just moved a list over from Yahoo, I'd like to be able to still
reach users who are set to No Email. Yahoo provided the facility for
Special Notices, and looking through the various options available,
it would seem that the Topics category
I am administrator of four lists and can't seem to find any options that
will forward bounces to me...I want to know which email addresses are bad,
rejected, etc., so that I can research them and make the appropriate
changes/updates to my list...can you tell me where in the setup menu I need
At 2:28 PM -0500 2005-03-13, [EMAIL PROTECTED] wrote:
I am administrator of four lists and can't seem to find any options that
will forward bounces to me...I want to know which email addresses are bad,
rejected, etc., so that I can research them and make the appropriate
changes/updates to my
On 3/14/2005 4:09, Brad Knowles [EMAIL PROTECTED] wrote:
At 2:28 PM -0500 2005-03-13, [EMAIL PROTECTED] wrote:
I am administrator of four lists and can't seem to find any options that
will forward bounces to me...I want to know which email addresses are bad,
rejected, etc., so that I
well my problem is solved one other problem
i tries to run on broad band dynamic ip and it works ... but i wanna know
can i run mailman and attach the domain with mailing list on my proxy
network which have ip like
192.168.0.1 or not
and one another problem which is not concerned with
iouq2 a wrote:
that my mailing list not send mail to yahoo.com domain email bcoz yahoo had
blocked mail from open relay
i know this is the problem in MTA but can u help me out
what can i do with sendmail to fix the problem so then my mailing list can
send email to yahoo.com email
they say that
At 9:42 AM + 2005-02-18, iouq2 a wrote:
i tries to run on broad band dynamic ip and it works ... but i wanna
know can i run mailman and attach the domain with mailing list on my
proxy network which have ip like 192.168.0.1 or not
You'll have to have your NAT/proxy device forward
i setup a mailing list and a mail server on my red hat 8.0
domain is www.futureinsite.net and the mail server is mail.futureinsite.net
i made a list [EMAIL PROTECTED]
when i add users in it iit send email that u r been added and send
notification this means it is working fine
but when i send
At 6:29 PM + 2005-02-17, iouq2 a wrote:
when i add users in it iit send email that u r been added and send
notification this means it is working fine
No, it means that the Mailman part has been done, and that you
may have additional work to do to get your MTA to recognize the new
mailing
Dinar Ali Kadri wrote:
mailman is install and site is here but the problem is the aliases i made them
but how can i masquerade them or i cant i mean mail-bounces is set to an alias
but [EMAIL PROTECTED] is not so when i subscribe for a list i gets an error
(smtp-failure) [EMAIL PROTECTED] is
I've seen this problem referenced in the archives but no solutions
given. I'm upgrading from 2.1.2 to 2.1.5 on a FreeBSD box. I keep
getting this:
Updating Usenet watermarks
- nothing to update here
Nothing to do.
updating old qfiles
Traceback (most recent call last):
File bin/update, line
Lynn Siprelle wrote:
I've seen this problem referenced in the archives but no solutions
given. I'm upgrading from 2.1.2 to 2.1.5 on a FreeBSD box. I keep
getting this:
Updating Usenet watermarks
- nothing to update here
Nothing to do.
updating old qfiles
I guess some bad message is in the
Lynn Siprelle wrote:
I've seen this problem referenced in the archives but no solutions
given. I'm upgrading from 2.1.2 to 2.1.5 on a FreeBSD box. I keep
getting this:
Updating Usenet watermarks
- nothing to update here
Nothing to do.
updating old qfiles
I guess some bad message is in the qfiles
Hello there,
I use mailman software and reached myself into a problem:
I sent out one newsletter, and for some reason it sent it out 4 times including
some BT emails 5 times.
I got emails in the list how can i just get it to send once from one email
address???
How can i add a reply function
At 4:12 PM + 2005-01-09, [EMAIL PROTECTED] wrote:
I sent out one newsletter, and for some reason it sent it out 4
times including some BT emails 5 times.
This is almost certainly a problem with the MTA (Mail Transfer
Agent, e.g., sendmail, postfix, exim, etc...) on the machine, and not
Hello!
I want to use a particular list for admin announcements only - i.e. no
member replies/discussion allowed. Can I do this and if so, how?
Best Regards,
Kelly Zantey
Director, BellyBelly Toys4Tikes
www.bellybelly.com.au Gentle Solutions for Conception, Pregnancy, Birth
Baby
At 9:06 PM +1100 2005-01-02, Toys4Tikes wrote:
I want to use a particular list for admin announcements only - i.e. no
member replies/discussion allowed. Can I do this and if so, how?
If you follow the instructions in the Mailman FAQ entry at
help!
I am the email administrator at my schools website and we have implemented
mailman on one of our servers. The problem is since the interphase is directed
at people who are stupid and I have three lists, I had a nice set up using
minimalist to do this but mailman is s much nicer. To
On Thu, Dec 23, 2004 at 09:31:49AM -0500, Cameron Tuckerman wrote:
my problem is that when i simply email this address nothing happens at all,
no bounce backs or anything. Do i have to say anything in the messege.
Wich MTA do you use?
Are you sure no error message neither mailman log and mta
Dear gurus,
I run a fairly low-traffic mailman on a stock debian woody server, which
suddenly stopped to work. I am clueless and looking for help. Details below
My system:
-
Debian stable (stock deban woody, regularly updated from
security.debian.org)
Debianized stock mailman package
At 9:31 PM -0700 2004-11-19, Rodd Ahrenstorff wrote:
Should I have my ISP drop the host name portion in my PTR?
Could the other ISP be attempting to verify my actual server host name
against the existing PTR record before accepting email?
Any other suggestions to keep the ISP's on my good
On 11/19/2004 20:31, Rodd Ahrenstorff [EMAIL PROTECTED] wrote:
Could the other ISP be attempting to verify my actual server host name
against the existing PTR record before accepting email?
Yes, they could be.
Forward and reverse lookups really should match. (Whether to reject based
on a
I've recently had a local ISP block incoming email from our mailing list
server. I'm trying to figure out why this occurred.it is not the result of
virus or spam activity. One thing I noticed: our PTR record is listed as
mail.domain.org, but it doesn't match the actual host name of the server
how do i uninstall mailman completely?
--
Mailman-Users mailing list
[EMAIL PROTECTED]
http://mail.python.org/mailman/listinfo/mailman-users
Mailman FAQ: http://www.python.org/cgi-bin/faqw-mm.py
Searchable Archives:
Hi,
I'm having problems with mail service in the Mail Server. I opened
Server Admin and connect to mail server and after that I selected
Computers Services and selected Mail.
What I saw was the Mailing Lists is Disabled under the Overview tab but
actually the Mailing Lists is Enabled which is
Patrick Raj wrote:
I'm having problems with mail service in the Mail Server. I opened
Server Admin and connect to mail server and after that I selected
Computers Services and selected Mail.
What I saw was the Mailing Lists is Disabled under the Overview tab but
actually the Mailing Lists is
I've been left without much support by the person who set up my account, and need to
send out some group emails today. I can get to the Mailman site, but can't see
anything (simple) that guides me to:
Find existing email addresses
Input new email addresses
Create and send an email to the list
Greetings,
I installed Mailman 2.1.5 on a new server and have been fighting with it for
a few days and wondering if someone can point me in the right direction to
look at as far as figuring .
I have a working installation of 2.1.4 on another server that has been
retired, however it's
is still around on this list, I'd love to hear his thoughts
on this.
Cheers
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Bill Ing
Sent: October 6, 2004 4:58 PM
To: [EMAIL PROTECTED]
Subject: [Mailman-Users] Help tracing a delivery problem
I am receiving the emails from Mailman telling me that, as
administrator, I need to authorize the delivery of a posting. It
includes a link (for my convenience) to access the admin web page and
approve the posting. However, my browser times out every time I try to
link to it. Is there
Timothy Hagan wrote:
I am receiving the emails from Mailman telling me that, as
administrator, I need to authorize the delivery of a posting. It
includes a link (for my convenience) to access the admin web page and
approve the posting. However, my browser times out every time I try to
link to
At 2:28 PM -0400 2004-09-24, Timothy Hagan wrote:
I am receiving the emails from Mailman telling me that, as administrator, I
need to authorize the delivery of a posting. It includes a link (for my
convenience) to access the admin web page and approve the posting. However,
my browser times out
On Sun, Sep 19, 2004 at 05:37:47PM +0200, [EMAIL PROTECTED] wrote:
So I was wondering if you can tell Mailman to automatically
except mail from non-list members, but who are listmembers
from the other 2 lists, in the Privacy section. Of course
non-list members who are not member of any of the
Abbas Qaizar wrote:
Can anybody explain for this :
We have received some recent bounces from your address. Your current bounce score is
1.0 out of a maximum of 5.0. Please double check that your subscribed address is
correct and that there are no problems with delivery to this address. Your
Hello all,
I have searched the FAQ's and a lot of other places, but can't seem to find this out...
I have created a few lists, say 1, 2 and 3. Now I want that only listmembers should be
able to mail to the list unmoderated. This is very easy, but I also want listmembers
of list 1 to mail to
Matt wrote:
So I was wondering if you can tell Mailman to automatically except mail from non-list
members, but who are listmembers from the other 2 lists, in the Privacy section. Of
course non-list members who are not member of any of the other 2 lists should not be
able to post.
Hope anyone
At 5:37 PM +0200 2004-09-19, [EMAIL PROTECTED] wrote:
So I was wondering if you can tell Mailman to automatically except mail
from non-list members, but who are listmembers from the other 2 lists,
in the Privacy section. Of course non-list members who are not member of
any of the other 2 lists
Hey. I have just started to use your mailing list program, but i am new to
website making etc.
I have set up a mailing list, but i do not understand certain things.
Is there a way of allowing people to subscribe to it on my website without
having to visit those pages?
Also, if the email is
Myles Dyer wrote:
Is there a way of allowing people to subscribe to it on my website without
having to visit those pages?
Yes, visit the FAQ wizard at http://www.python.org/cgi-bin/faqw-mm.py
and read article 4.33
Also, if the email is [EMAIL PROTECTED] and I want to send a
newsletter, do I
You're right; they are basic questions. I'd suggest reading the
documentation that is available at:
Mailman FAQ: http://www.python.org/cgi-bin/faqw-mm.py
And at
http://www.list.org/docs.html
On or near 8/27/04 2:28 PM, nderrff retrgrtg at [EMAIL PROTECTED]
observed:
Hey. I have just started
First, all my announcements to my new mailman list were bounced back,
and I couldn't figure out how to correct it. Then my postings (like
this one) to the mailman-users list were also held up. Now, I'm unable
to unsubscribe from the mailman-users list. Somebody help me, I'm
trapped.
Harv Teitelbaum wrote:
First, all my announcements to my new mailman list were bounced back,
and I couldn't figure out how to correct it. Then my postings (like
this one) to the mailman-users list were also held up. Now, I'm unable
to unsubscribe from the mailman-users list. Somebody help me,
http://www.thebeavers.net
(B
(B
(B
(BI am a novice with frontpage and want to install mailman on my site. Do you
(Bknow of anyone who can help me with my installation.
(B
(BThanks,
(BCurt Beavers
(B770-313-2624
(B404-818-9068 fax
(B818-9068 voice-com
(B http://www.thebeavers.net/
I am a webmaster for my school and we are migrating from sendmail and
minimalist to mailman and exim. We currently are running a daily
announcement mailing list with a perl script. there is a long list of
members and the perl script sends the message to each one. we want to use
mailman but keep
On Aug 19, 2004, at 6:13 AM, Curt Beavers wrote:
http://www.thebeavers.net
I am a novice with frontpage and want to install mailman on my site.
Do you
know of anyone who can help me with my installation.
FrontPage has nothing to do with Mailman.
Perhaps you may be asking how to install Mailman
On Aug 22, 2004, at 7:11 PM, Cameron Tuckerman wrote:
I am a webmaster for my school and we are migrating from sendmail and
minimalist to mailman and exim. We currently are running a daily
announcement mailing list with a perl script. there is a long list of
members and the perl script sends the
Yes Mark, I tried those things, and they don't work. I followed the same
URL you show below and followed the instructions. Twice. The page that
loaded then had the message A confirmation email has been sent... but I
never received anything, and am still subscribed.
Harv
Mark Sapiro wrote:
Harv Teitelbaum wrote:
Yes Mark, I tried those things, and they don't work. I followed the same
URL you show below and followed the instructions. Twice. The page that
loaded then had the message A confirmation email has been sent... but I
never received anything, and am still subscribed.
I
Hello,
Looking for a lifeline to revive our administrator.
Can anyone reset the password to administer this list?
As you can read below, the administrator,
[EMAIL PROTECTED], no longer has the cookie and
therefore we are all unable to change anything. Her
current password is goober. If there is
--On Monday, August 16, 2004 12:01 pm -0700 jill woodward
[EMAIL PROTECTED] wrote:
Hello,
Looking for a lifeline to revive our administrator.
Can anyone reset the password to administer this list?
As you can read below, the administrator,
[EMAIL PROTECTED], no longer has the cookie and
Hello. I want the problem that don´t find solution
Help me please
___
- The following addresses had permanent fatal errors -
|/usr/local/mailman/mail/mailman post gerleca
(reason: 2)
(expanded from: [EMAIL PROTECTED])
- Transcript of session follows
At 3:40 PM -0300 2004-08-11, Euler Ricardo Rodrigues Ribeiro wrote:
Hello. I want the problem that don´t find solution
If you had bothered to search the Mailman FAQ Wizard for the
terms group mismatch, you would have found the single entry
returned by
We have recently lost our webkeeper and I am trying to mail out this
newsletter that we have set up through mailman. I know nothing, can you
tell me what to do?
Julie
Julie Nelson
Development Coordinator
Casting Certification Coordinator
Federation of Fly Fishers
[EMAIL PROTECTED]
406-585-7592
uhud wrote:
I have newly installed mailman and for privacy reasons decided to hide members
(senders) email addresses when they send a message to the list.
My question is, suppose now a member spams the list, is there a way I can find
out which member it is?
The Received: headers should give a
At 5:53 PM +0300 2004-07-19, uhud wrote:
My question is, suppose now a member spams the list, is there a way
I can find
out which member it is?
Check your logs and the Received: headers of the message.
See also
http://www.python.org/cgi-bin/faqw-mm.py?req=showfile=faq01.022.htp.
--
Brad
At 3:24 PM -0600 2004-07-19, Julie Nelson wrote:
We have recently lost our webkeeper and I am trying to mail out this
newsletter that we have set up through mailman. I know nothing, can
you tell me what to do?
Not without a lot more information. See
On 7/20/2004 7:13, Mark Sapiro [EMAIL PROTECTED] wrote:
uhud wrote:
I have newly installed mailman and for privacy reasons decided to hide
members
(senders) email addresses when they send a message to the list.
My question is, suppose now a member spams the list, is there a way I can
Hello list members,
as written in a previous posting, the upgrade from 2.1.2 to 2.1.5 failed. When
I nevertheless start MM 2.1.5, I get around 20 of the following errors:
---
# mailmanctl start
Starting Mailman's master qrunner.
# Traceback (most recent call last):
File
Mailman 2.1 seems to be running fine on my Unix Red Hat 9/Plesk 6.0
server. I can log in through the admin panel and change any setting,
add my emails via mass subscription etc. However, when I send an email
to my list nothing gets delivered and I receive no undelivered message.
I have
On Thu, 17 Jun 2004 20:45:24 -0700
C y b e r sAM wrote:
Mailman 2.1 seems to be running fine on my Unix Red Hat 9/Plesk 6.0
server. I can log in through the admin panel and change any setting,
add my emails via mass subscription etc. However, when I send an
email to my list nothing gets
Hi,
I'm trying to set up two Mailman listservs (v. 2.1.5) as a list
administrator (my host, the real server administrators, installed it for
customer's usage). Everything's working correctly, and I've been
through the settings more than a few times, but I can't seem to find out
how I can switch
At 8:45 PM -0700 2004-06-17, C y b e r sAM wrote:
Mailman 2.1 seems to be running fine on my Unix Red Hat 9/Plesk 6.0 server.
I can log in through the admin panel and change any setting, add my emails
via mass subscription etc. However, when I send an email to my list nothing
gets delivered
At 3:04 PM -0700 2004-06-23, Richard Barnet wrote:
Everything's working correctly, and I've been
through the settings more than a few times, but I can't seem to find out
how I can switch one of the lists into an announcement only (one-way)
broadcast list, as opposed to my
At 1:54 PM -0500 2004-06-24, Ing. Marcos Rene Alvarez Moreno wrote:
I have a question, im working with mailman 2.0.11, how do i send a attach
to over 1 users accounts?
Create a normal mailing list, taking all defaults -- By default,
Mailman won't strip or filter anything. Subscribe your
I have mailman 2.1.4 running on an exim4/Debian system. I am running the
multiple configuration for exim4, and have been able to get some help
from this list to do so. We have figured out some of the problems, but
when I set-up the various macros/files the way suggested (which did get
my
-Users] help with configuration
I have mailman 2.1.4 running on an exim4/Debian system. I am running the
multiple configuration for exim4, and have been able to get some help
from this list to do so. We have figured out some of the problems, but
when I set-up the various macros/files the way
At 5:24 PM -0700 2004-06-14, Ron Jaenisch wrote:
It appears that emails sent hours ago are still not here
and I tried pressing the emergency moderator feature
where do I see the list to be moderated?
Have you seen the FAQ entry at
It seems that my topic and original request got accidently hijacked, so
I am sending this again.
I have mailman 2.1.4 running on an exim4/Debian system. I am running the
multiple configuration for exim4, and have been able to get some help
from this list to do so. We have figured out some of the
Dear mailmaners:
With mailman 2.1.4 on Solaris 2.8 using sendmail (no snyde comments please).
Everything works, but mail is not sent to lists.
1. messages are help for moderation
2. messages are approved
3. messages get sent to an external archiver
4. BUT MESSAGES ARE NOT SENT TO THE LIST VIA
At 5:21 PM -0400 2004-06-08, Thomas M. Parris wrote:
With mailman 2.1.4 on Solaris 2.8 using sendmail (no snyde comments please).
Sendmail is a perfectly fine MTA for use with Mailman. It may
take a bit more work to configure than postfix or exim, but on the
other hand (in my experience) it
Dear Sir
I am a user for mailman
I moderate about 12 mailman lists
I need a way to copy the members from one list to other one
I used to copy one page (letter) by one its too hard and take alot of
time.
If it used mysql database I could dump it but I don't know where the
data stored.
thanks
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
SaidaOnline.net wrote:
I need a way to copy the members from one list to other one
I'd use list_members to dump the member list from the first list and
then sync_members or add_members to add them to the other list.
- --
ToddOpenPGP -
At 5:19 AM -0400 2004/05/18, SaidaOnline.net wrote:
I need a way to copy the members from one list to other one
I used to copy one page (letter) by one its too hard and take alot of
time.
If it used mysql database I could dump it but I don't know where the
data stored.
It does not use MySQL.
Let me start by saying that I don't know much about mailman. I use the
version that comes with Mac OS X server and it's worked fine until
yesterday. All of a sudden, though, messages aren't getting through.
I poked around and the messages are received OK, but they are sitting
in
Sorry, I don't want list submissions, 'm trying to find someone who call
tell me why my mailman list has stopped working
Sean Flynn
Opus 23 / Opus-Asia records
Unit 2F
Beehive mill
Jersey St
Manchester
M4 6JG
England
07866 919212
http://www.swarsystems.com www.swarsystems.com (official music
Hi, if anyone can help i really appreciate it. forgive me but i don't
know much about programmes, i send out a monthly newsletter to my
mailing list, once i have sent it from my pc i then go to the mailing
list on the website, then to Tend to pending administrative requests,
and i authorise it and
Hi there,
I really need help to use your sw.
I've made all settings but I really don't know how to send simple mass email
to my subscribers.
Please help me.
Regards,
Ross
--
Mailman-Users mailing list
[EMAIL PROTECTED]
Hi guys
I need to unsubscribe everyone on one of my lists and then
subscribe in mass again. I have the list for the new
subscriptions, but I don't see where I perform the mass
removal.
Mailman just asks for a file, which I don't have.
Anyone with some bright ideas?
Thanks
Cheers
Hilton
Does anyone can help me to retrieve the list of associates of my 6 Mailman lists?
Thanks.
A. J. Gevaerd
Brazil
--
Mailman-Users mailing list
[EMAIL PROTECTED]
http://mail.python.org/mailman/listinfo/mailman-users
Mailman FAQ:
I should configure my web server (called webhost who has nfs mounted the
mailman page from another server) and my mailman server (called emailhost)
. How shoul I configure my mm_cfg.py??? I have:
DEFAULT_EMAIL_HOST = 'emailhost.mydomain'
DEFAULT_URL_HOST = 'webhost.mydoain'
DEFAULT_URL_PATTERN
I need help.
I have 6 lists stored at MailMan version 2.1.3. and I need to retrieve the associates´
names in a list. How do I proceed ???
Thanks for any help.
A. J. Gevaerd
Brazil
--
Mailman-Users mailing list
[EMAIL PROTECTED]
On Tue, Mar 30, 2004 at 02:58:58PM -0300, A. J. Gevaerd (Revista UFO) wrote:
I need help. I have 6 lists stored at MailMan version 2.1.3. and I
need to retrieve the associates? names in a list. How do I proceed
???
Not sure what you mean by associates, but you can list all
of
I only speak (write) a little English, sorry.
I have Fedora Core UP (S.O.), sendmail and mailman, but I have problem with
mailman.
What are the steps to install
mailman.
Thank you.
--
Mailman-Users mailing list
[EMAIL PROTECTED]
On Thu, 2004-03-25 at 09:52, Juanan wrote:
I only speak (write) a little English, sorry. I have Fedora Core UP
(S.O.), sendmail and mailman, but I have problem with mailman.
What are the steps to install mailman.
Read the documentation at www.list.org
--
-jamie [EMAIL PROTECTED] |
What causes certain messages to be shunted? (Has anyone documented
this?)
Do attachments play a role in this mechanism?
Has this behaviour been redefined in versions subsequent to 2.1.2?
I want to make a case to my sysadmin to upgrade to 2.1.4, but he's
afraid that in fixing one problem, others
Hello list,
My name is Wade. I am trying to use your software, but the web interface
is fighting me.
I am using rh9 and apache 2.0.49 I think, and python 2.3.3. I can run
bin/list_lists and see the lists but I cant see them on the net. I then
try to create a list from the net, but It says
On Monday, March 22, 2004 7:58 AM, Remo Campopiano wrote:
Is this a place to ask for help setting up Mailman lists?
This list is generally for people who are server admins and have installed
(or want to install) Mailman on their server. There's another list for
people who aren't server admins
Mailman version 2.1.4
Hi folks. I administer a few Mailman-based lists on etree.org
(http://mail.etree.org has the web interface if you care), and
used to think I had the lists well configured to block most
virus and SPAM.
Lately however the
On Thu, Mar 11, 2004 at 11:59:50AM -0500, Caleb Epstein wrote:
Here is a sample message:
http://bklyn.org/~cae/mailman-stumper.txt
OK, I've found out a little bit more about the exploit. The
message is sent with an envelope-from (I think thats the right
term) of an
Calab,
I just posted a bug ticket for this problem. You are the 3rd or 4th
person, including me, to have reported this to mailman-users
recently. The bug ticket is here:
http://sourceforge.net/tracker/?group_id=103atid=100103
Please add your comments to the item so the developers take this
On Thu, 2004-03-11 at 17:28, Caleb Epstein wrote:
On Thu, Mar 11, 2004 at 11:59:50AM -0500, Caleb Epstein wrote:
OK, I've found out a little bit more about the exploit. The
message is sent with an envelope-from (I think thats the right
term) of an actual list subscriber, one
On Thursday, March 11, 2004, at 09:50 AM, ted wrote:
I just posted a bug ticket for this problem. You are the 3rd or 4th
person, including me, to have reported this to mailman-users
recently. The bug ticket is here:
http://sourceforge.net/tracker/?group_id=103atid=100103
Please add your
On 3/11/2004 10:32, Jerold Stratton [EMAIL PROTECTED] wrote:
On Thursday, March 11, 2004, at 09:50 AM, ted wrote:
I just posted a bug ticket for this problem. You are the 3rd or 4th
person, including me, to have reported this to mailman-users
recently. The bug ticket is here:
On Thu, Mar 11, 2004 at 05:59:49PM +, Jamie Penman-Smithson wrote:
This type of forgery is usually best handled at the MTA level, I've
setup Postfix to reject mail which appears to originate locally, but is
being received from somewhere else, You don't say what MTA you're using,
but I'm
I am desperate for a little help.
I maintain a mailing list that uses Mailman 2.0.13. But that's it!!! I have
a friend who installed it but he is AWOL in Japan, and the list has stopped
working...I suspect that the clash of viruses is the cause.
Here is my urgent question: since I have no access
On Wed, 2004-02-25 at 23:25, [EMAIL PROTECTED] wrote:
I need a little bit of help with the configuration
What we are basically gonna use the mail list for is for mass emails (i have
a site where i post upcomin music events happening in the area, and we send
weekly emails with upcomin
Hi, first of all congrats on this great software
I need a little bit of help with the configuration
What we are basically gonna use the mail list for is for mass emails (i have
a site where i post upcomin music events happening in the area, and we send
weekly emails with upcomin events to
can i get help by removing passwords option for subscribes?
how can i disable view archive list?
how can i disable subscriber's posting?
hope to hear from you soon!
daniel
--
Mailman-Users mailing list
[EMAIL PROTECTED]
501 - 600 of 979 matches
Mail list logo