Hi,
Is it possible to test this exact version on Windows? Development binaries at
gisinternals are coming from trunk, aren't they? At least Windows binaries for
the release candidate version would be nice to have when the time comes.
-Jukka Rahkonen-
thomas bonfort wrote:
The MapServer
Hi,
Frank Broniewski wrote the following question to the Mapnik users list a few
hours ago and I started to think that I would like to have such min/max
pixelsize setting in Mapserver. I can simply get the native pixel size of our
maps with gdalinfo or something and I can estimate that when I
-
thomas bonfort wrote:
Jukka,
I would say that Frank also raised this issue on the mapserver list [1]. Am I
mistaken or is your request identical?
regards,
thomas
[1] http://osgeo-org.1560.x6.nabble.com/Scales-and-raster-maps-
td5071674.html
On 27 August 2013 12:49, Rahkonen Jukka
Rahkonen-
-Alkuperäinen viesti-
Lähettäjä: thomas bonfort [mailto:thomas.bonf...@gmail.com]
Lähetetty: 22. elokuuta 2013 11:19
Vastaanottaja: Rahkonen Jukka
Kopio: Peter Freimuth; mapserver-users@lists.osgeo.org
Aihe: Re: [mapserver-users] cgi variable substituition in DATA statement
Hi,
Blind guess, but perhaps quetes inside the SQL of you DATA leads to unexpected
result
AND (((acquisition_date = date_trunc('day',date '%STARTDATE%')
Make a try to write this as
Lähettäjä: mapserver-users-boun...@lists.osgeo.org
be taken
literally with the per cents signs.
-Jukka Rahkonen-
Rahkonen Jukka wrote:
Hi,
Blind guess, but perhaps quetes inside the SQL of you DATA leads to unexpected
result
AND (((acquisition_date = date_trunc('day',date '%STARTDATE%')
Make a try
Hi,
Have you tried to use ogrtindex http://www.gdal.org/ogrtindex.html instead of
tile4ms? Try also if there is any difference if you read the tileindex through
ogr or with the native Mapserver method. I have found some differencies with
these options. For example I found this note from my
is for this
first
conversion. It would be nice to be able to have one contiguous layer without
having to do the reprojection.
Thanks,
James
-Original Message-
From: Rahkonen Jukka [mailto:jukka.rahko...@mmmtike.fi]
Sent: Wednesday, August 07, 2013 10:38 PM
To: Evans, James R Civ USAF ACC 84
Hi,
What if there happens to be empty/null geometries in your source data? I guess
you can add AND geometry in not NULL and perhaps even AND
IsValid(geometry)=1 to your DATA line.
-Jukka Rahkonen-
Andrea Peri wrote:
I'm using spatialite 4.1.1,
so use ogr to
Hi,
Stop what you do, it is not the right thing anymore. It should not be necessary
to reproject the images into a common projection any more. This page describes
how Mapserver is planned to be made to support tileindex with mixed projections
Hi,
Please help us by showing us the relevant part of your mapfile and by adding
DEBUG 5 into your layer definitions and sending the error message from the log
to us too. But after reading this
http://www.mapserver.org/optimization/debugging.html and this
Hi,
You have still not defined the symbol square that you want to used for
drawing.
Here comes a quick and not polished example that I have modified from your
mapfile. It shows points for me with OpenJUMP with my data roskis.shp.
MAP
DEBUG 5
CONFIG MS_ERRORFILE c:\ms4w\tmp\points_error.txt
Hi,
My first bet is that the reason is in
MAXSCALEDENOM 82500
You must zoom pretty close for turning this layer on. Other possibility is that
location field points to a relative or absolute file location which is not
valid for your test system.
Add DEBUG 5 into your layer and MS_ERRORFILE into
Hi,
Error means that for some reason Mapserver does not find the file from path
/blah/blah/blah/33114.TIF. I am not sure why. I would create a new tileindex
file with gdaltindex tool by using the -write_absolute_path switch
http://www.gdal.org/gdaltindex.html
There is nothing more to do than
Hi,
I guess that you are mixing two great software by trying to use the Geoserver
viewparams vendor option with Mapserver. Instead, with Mapserver you will
need to use the run-time substitution system. Read for example
http://mapserver.org/cgi/runsub.html#runsub and
Hi,
Feels odd, I have listen_addresses = '*' in my PostgreSQL 9.2
postgresql.conf and Mapserver works as supposed. The wildcard * should include
everything, including localhost.
It comes into my mind that sometimes I have had same kind of issues when
creating configuration files by using
Hi,
I have had some troubles with using ogrtileindex on Linux (CentOS) with
Mapserver 6.2.1. I faced two dictinct issues.
1) Uppercase/lowercase trouble with file names of the source vectors when using
the MS native connection.
My shapefiles had names like MM26P3CP.SHP. I created an ogrtindex
Hi,
How is this interesting project going on? I have been awaiting a tool like this
since the death of MapLab.
-Jukka Rahkonen-
Julien-Samuel Lacroix wrote
Hello,
We are pleased to announce that MapServer got 2 project accepted for the
Google Summer
Hi,
Sure, like this
CONNECTIONTYPE POSTGIS
CONNECTION host=localhost dbname=postgis user=www-data password=www-data
port=5432
DATA way from (select way,osm_id ,landuse, name from osm_polygon where landuse
is not null) as foo using unique osm_id using srid=3857
Even better, this is documented
Hi,
The web page is not up to date. There is also 3.1.0 beta available.
http://www.maptools.org/dl/ms4w/ms4w_3.1.0-beta1.zip
http://lists.maptools.org/pipermail/ms4w-users/2013-April/002230.html
It is a beta version but the Mapserver included in the package has been stable
for me.
You can get
Hi,
I made a trial with Firefox Poster plugin and I get correct results back after
correcting the typename. I do not know what is wrong with API Kitchen and your
other trials.
wfs:GetFeature xmlns:wfs=http://www.opengis.net/wfs; service=WFS
version=1.1.0
Sven Geggus wrote:
Rahkonen Jukka jukka.rahko...@mmmtike.fi wrote:
I encourage you to have a try with GDAL 1.10 because I believe that
for your use case Spatialite will be considerable faster than PostGIS.
Thanks! It seems to work fine using gdal 1.10 now and seems to be slightly
Hi,
I fear I cannot help with Mapserver configuration. However, I see that you are
using a geographics coordinate system (EPSG:4326) and I would like to ask your
opinion about what would be the correct distance/length display.
See the screenshot at
Sven Geggus wrote:
Rahkonen Jukka jukka.rahko...@mmmtike.fi wrote:
GDAL has been supporting Spatialite spatial index since
http://trac.osgeo.org/gdal/ticket/4212 Some further work was done in
http://trac.osgeo.org/gdal/ticket/4508 I am remembering from my own
experience that a query
Hi,
GDAL has been supporting Spatialite spatial index since
http://trac.osgeo.org/gdal/ticket/4212
Some further work was done in http://trac.osgeo.org/gdal/ticket/4508
I am remembering from my own experience that a query like the one you are using
needs GDAL 1.10 but with that version the query
Hi,
Obviously Global Mapper does not send proper WMS request. You will see the same
message from this URL
http://hip.latuviitta.org/cgi-bin/ms_ows?layers=all
Check from your Apache access.log file how the requests sent by Global Mapper
look like and you may get a hint about what you should do
Hi,
Try this live example. The sql parameter is feeding a subquery into DATA and
the next link selects OpenStreetMap primary highways which do not have maxpeed
tag. Change primary into secondary and you will see a different map.
Hi,
Your problem is in the Leaflet code which does not take X and Y values from the
mouse click and you will be better served if you ask about that from some
Leaflet forum. However, there is a working GetFeatureInfo example at
http://projects.bryanmcbride.com/leaflet/wms_info.html
Perhaps you
Hi,
Here you can find some more GDAL commands and a nice map as a result.
https://groups.google.com/forum/#!msg/openjump-users/oedpVya8qNk/7Tk5y0xxYAoJ
Andrei has created several images with GDAL and finally merged them together
with Gimp. I do not know if this merging could be done with GDAL
Hi,
If you use WMS 1.3.0 you must use Nothing-Easting axis order with EPSG:4326.
Stay with WMS 1.1.1 of flip the coordinates in your request. Search WMS 1.3.0
axis order and you will find reading for the rest of the day.
-Jukka Rahkonen-
Todd Fagin wrote
73107
405.740.4324 (voice)
904.471.5548 (fax)
www.coordinatesolutions.com
-Original Message-
From: Rahkonen Jukka [mailto:jukka.rahko...@mmmtike.fi]
Sent: Tuesday, June 11, 2013 12:31 PM
To: Todd Fagin; mapserver-users@lists.osgeo.org
Subject: VS: [mapserver-users] Help with configuring
Hi,
In case this could help someone, I found that for some reason the instructions
for installing Mapcache on Apache version 2.4 did not work for me.
The document http://www.mapserver.org/trunk/mapcache/install.html suggests to
use the new access control syntax which is described in a similar
Hi,
If you reproject images one by one to any common coordinate system you will get
black collars to most of them because images will be rotated. In order to make
them transparent by using nodata you must keep images uncompressed. However,
you may find it teasing to use the jpeg-in-tiff
Hi,
This is so important thing to know that it should be mentioned in
http://www.mapserver.org/trunk/mapcache/seed.html
I believe I am not the only GeoWebCache users who experiment with MapCache and
think that MapCache can also do seeding/reseeding/truncating for an active
cache because that
Hi,
I am sure that layer names should not begin with a number by WMS standard, or
perhaps it is XML in the background. Numbers are allowed later in the name but
as the first character. However, I think this is just nice to know because I do
not know any WMS client that would deny to use such
with ArcGIS
server. Perhaps it in no more possible to create invalid Names.
-Jukka-
Rahkonen Jukka wrote:
Hi,
I am sure that layer names should not begin with a number by WMS standard, or
perhaps it is XML in the background. Numbers are allowed later
June 2013 18:02, Rahkonen Jukka
jukka.rahko...@mmmtike.fimailto:jukka.rahko...@mmmtike.fi wrote:
Hi,
Have you been considering to seed the cache for aerial or satellite image
layers in opposite order compered to the normal Z0, Z1, Z2... so that only the
best resolution Z(max) tiles (or perhaps
.
-Jukka Rahkonen-
Lähettäjä: Puneet Kishor [punk.k...@gmail.com]
Lähetetty: 9. kesäkuuta 2013 20:22
Vastaanottaja: thomas bonfort
Cc: Rahkonen Jukka; Mapserver-Users (mapserver-users@lists.osgeo.org)
Aihe: Re: [mapserver-users] Creating lower aeriel image cache from
Hi,
How well does Mapcache seeder tool handle the case when the original big aerial
image coverage is updated little by little so that the hole cycle takes 3 to 6
years? Reseeding the whole cache every time when a batch of new images is
received does not feel like a reasonable solution.
A)
-
thomas bonfort wrote:
On 7 June 2013 17:48, Rahkonen Jukka
jukka.rahko...@mmmtike.fimailto:jukka.rahko...@mmmtike.fi wrote:
Hi,
How well does Mapcache seeder tool handle the case when the original big aerial
image coverage is updated little by little so that the hole cycle takes 3 to 6
years
Hi,
I made a very short test with Mapnik 2.2.0 demo maps. Mapnik can create png
images either with AGG or with Cairo and I compared the 256 colour demo maps
obtained by running the Mapnik c++ version of rundemo test program. Image
sizes were
AGG 112 kb, went down to 104 kb by optimizing with
Hi,
I believe that your human readable names with space characters are invalid in
XML and WMS and thus there is no much need to think about how Mapserver encodes
them. If you administrate the remote service use human readable Title for the
layers and use underscores or any other acceptable
strongly encourage to use
layer or map level DEBUG for all regular needs instead of MS_DEBUGLEVEL.
-Jukka Rahkonen-
Lähettäjä: mapserver-users-boun...@lists.osgeo.org
[mapserver-users-boun...@lists.osgeo.org] k#228;ytt#228;j#228;n Rahkonen
Jukka
Hi,
If you want to do is fast, try sortshp and sort your shapefile by your
attribute http://mapserver.org/utilities/sortshp.html. It should work well if
one attribute is enough for sorting and in some cases it may be possible to get
a usable result by sorting the sorted shapefile again by
well. And adding the service and request parameter to the URL works too. What
I'm wondering is that why I can't access http://192.168.56.101/mapcache/demo/
as the document says.
On Tue, Jun 4, 2013 at 12:40 PM, Rahkonen Jukka
jukka.rahko...@mmmtike.fimailto:jukka.rahko...@mmmtike.fi wrote:
Hi
Hi,
I have been using for some years a biggish shapefile directory through
shapefile tileindex. The layer is in production with Mapserver 6.0 (MS4W) and
the layer is defined like this
LAYER
NAME bunch_of_shapes
TYPE POLYGON
#CONNECTIONTYPE OGR #don't use, it breaks classification and
and native vector tileindex
On 2013-06-04 8:56 AM, Rahkonen Jukka wrote:
Hi,
I have been using for some years a biggish shapefile directory through
shapefile tileindex. The layer is in production with Mapserver 6.0
(MS4W) and the layer is defined like this
LAYER
NAME bunch_of_shapes
Hi,
We have compiled Mapserver 6.2.1 for Linux and the version info is as follows
MapServer version 6.2.1
OUTPUT=GIF OUTPUT=PNG OUTPUT=JPEG SUPPORTS=PROJ
SUPPORTS=GD SUPPORTS=AGG SUPPORTS=FREETYPE SUPPORTS=CAIRO
SUPPORTS=ICONV SUPPORTS=WMS_SERVER SUPPORTS=WMS_CLIENT
SUPPORTS=WFS_SERVER
9:23 AM, Rahkonen Jukka wrote:
Hi,
We have compiled Mapserver 6.2.1 for Linux and the version info is as
follows
MapServer version 6.2.1
OUTPUT=GIF OUTPUT=PNG OUTPUT=JPEG SUPPORTS=PROJ SUPPORTS=GD
SUPPORTS=AGG SUPPORTS=FREETYPE SUPPORTS=CAIRO SUPPORTS=ICONV
SUPPORTS=WMS_SERVER
:
http://127.0.0.1/mapcache/demo/ You should see a clickable list of demo links
It that I've misunderstood?
On Fri, May 31, 2013 at 12:49 PM, Rahkonen Jukka
jukka.rahko...@mmmtike.fimailto:jukka.rahko...@mmmtike.fi wrote:
Hi,
Great, then you have made it. The message means that your URL
Hi,
It can be the old STATUS=ON thing. Either change it to STATUS=DEFAULT in the
mapfile or add layers=all into the request.
Circle error means that Mapserver cannot find a symbol named circle. You will
find reading about symbols from Mapserver documents.
-Jukka Rahkonen-
Hi,
Great, then you have made it. The message means that your URL connects
Mapcache as WMS service but the message is missing the compulsory WMS
parameters SERVICE and REQUEST because you only did
http://192.168.56.101/mapcache/
You will see the WMS 1.1.0 capabilities document by using
is.
Maybe I cannot use MAXSCALEDENOM in these circumstances where I need
to serve in two projections.
Many thanks.
Regards,
Donald
-Original Message-
From: Rahkonen Jukka [mailto:jukka.rahko...@mmmtike.fi]
Sent: 20 May 2013 05:53
To: Donald Kerr; mapserver-users
Hi,
I have always used tinyows.xml configuration file, but in
http://mapserver.org/trunk/tinyows/mapfileconfig.html
there reads
To indicate where your Mapfile is located, to TinyOWS binary, use the
''TINYOWS_MAPFILE'' environment variable.
Perhaps the environment is set for you when you run
Hi,
First thing to do is really to check the GetMap request which is sent by QGis.
Setting DEBUG on is good general suggestion, but all the WMS requests from the
clients go always directly into Apache access log in
\ms4w\Apache\logs\access.log and you can find them from there.
Check the WIDTH
Hi,
I am not sure either if reading 2GB shapefiles works with the native shp
reader on all platforms, but as the ticket says, you should be able to use OGR
connection in the mapfile even with your current version. If you use OGR you
can also split the shapefile into pieces and read them
No, it may just be that your question is a bit hard to answer. Could you give
us a bit more information about your data, mapfile and WFS request you have
been using? Ogrinfo report about the datasource, layer definitions from the
mapfile and at least the extents from the map level are needed.
Hi,
I was testing Mapserver 6.2.1 from the MS4W 3.0.1beta-1 installation and
thought that there was something wrong with the connection. However, the
problem seems to be in Mapserver side. I have been using FORMAT=image/png for
reading the remote WMS with Mapserver 6.0.1 but with MS 6.2.1 it
the output of that request with a command such as wget https://... -
O /tmp/test.png and try running gdalinfo on the output.
Maybe that will give some hints.
Daniel
On 13-04-25 8:05 AM, Rahkonen Jukka wrote:
Hi,
I was testing Mapserver 6.2.1 from the MS4W 3.0.1beta-1 installation
the gdal_translate tool from the exact same
MS4W package as what your MapServer is using.
Daniel
On 13-04-25 10:17 AM, Rahkonen Jukka wrote:
Hi,
Yes, I have checked that png files saved from both services I have
been testing are OK. I know that our own server is using this outputformat
Daniel Morissette wrote:
On 13-04-25 10:37 AM, Rahkonen Jukka wrote:
Hi,
No trouble at all with gdal_translate that is in gdal-ogr tools of the same
MS4W3.1.0beta1. If the error message gives right information then perhaps
the trouble
Jeff McKenna wrote
On 2013-04-21 6:17 PM, Rahkonen Jukka wrote:
Hi,
I can't get Spatialite views or SQL selects to work as data source with
recent
Mapserver versions. I created an issue and made a simple test database and
corresponding mapfile for if someone wants to make a test
Hi,
The same http header works for me as
!-- MapServer Template --
html
head
link rel=stylesheet href=style.css type=text/css /
meta http-equiv=content-type content=text/html; charset=ISO-8859-1/meta
I do not understand why it does not work for you. What Mapserver do you use?
Are you
Hi,
TinyOWS supports only PostGIS and you can't do WFS-T against your SQL Server
with Mapserver family. Try Geoserver instead
http://docs.geoserver.org/stable/en/user/data/database/sqlserver.html
-Jukka Rahkonen-
Saka Royban wrote:
Hi all.
I've asked this question in MS4W mailing list but
/source
You may use http://www.base64encode.org/ to encode your Username and Password,
written as username,password - encodes to dXNlcm5hbWUscGFzc3dvcmQ=, so the
full configuration for this login will be:
AuthorizationBasic dXNlcm5hbWUscGFzc3dvcmQ=/Authorization
Matrin
2013/4/12 Rahkonen
Hi,
You ask What is this? and my answer is that it is an impolite request for help
because you do not tell us anything at all about what you have been trying.
However, I guess that you have a book Beginning Mapserver: Open Source GIS
Development from year 2005. Your problem may be related to
Hi,
I can't get Spatialite views or SQL selects to work as data source with recent
Mapserver versions. I created an issue and made a simple test database and
corresponding mapfile for if someone wants to make a test in different
environment. I was testing with the brand new MS4W 3.1.0-beta1.
Hi,
I made some trials too. I used two different Windows binaries
- MS4W with gdal18.dll (2011-08-12) and Mapserver 6.0.1
- binaries from gisinternals including gdal110dev.dll (2013-03-24) and
Mapserver 6.3dev
Spatialite database was of version 3.0 and created with Spatialite-gui 1.5.0
When I
Hi,
Is it possible to configure Mapcache to use a WMS source which is using http
Basic authentication through https? Are there some hidden/undocumented
parameters for that or would it work simply by giving the service URL as
urlhttps://user:passw...@vmap0.tiles.osgeo.org/wms/vmap0/url
-Jukka
Hi,
The immediate reason for the error is that you do not have a referred template
file in your system
TEMPLATE 'fooOnlyForWMSGetFeatureInfo'
For correcting this error you must change TEMPLATE to refer to something that
exists. The template file must contain at least the magic string
Hi Andrea,
Could you make test by using something else than '9%' as variable default
value, for example 'K9%'? We have had troubles with selecting atrribute values
like 04.186.1.004 with SLD_BODY. We had to update the attributes into
K04.186.1.004 for making filtering to work. Obviously
but a text field starting with a character.
Very rarely situation in our primarykey fields. :(
Thx for support,
Andrea.
2013/4/4 Rahkonen Jukka
jukka.rahko...@mmmtike.fimailto:jukka.rahko...@mmmtike.fi
Hi Andrea,
Could you make test by using something else than '9%' as variable default
value
this to create SLD's for all my layers and then apply
it on client side.
Murad
-Original Message-
From: Rahkonen Jukka [mailto:jukka.rahko...@mmmtike.fi]
Sent: Wednesday, 27 March 2013 4:25 PM
To: Murad Jamal; mapserver-users@lists.osgeo.org
Subject: Re: [mapserver-users] WFS Server Layer styles
Hi,
If I understood right you are using Mapserver as a WFS server and and you await
that your WFS client, for example QGis, shows the layer with similar styles
than it shows the same Mapserver layer through WMS.
WMS and WFS are very different things. WFS sends pure data in XML format and
Hi,
If you are on Windows you may not success. At least the version which is
available for MS4W has a bug and it does not do inserts.
One error I can see in your request is that it is using geometry in GML2 style
with WFS 1.1.0. I would be at least a good habit to use gml:pos there. This
Hi,
It is quite well documented here http://mapserver.org/ogc/wms_server.html
-Jukka Rahkonen-
Marco Araujo wrote:
Hello everyone,
Can anyone guide me to build a MapServer WMS?
As I do, scripts, etc..
Already have successfully running MapServer CGI.
Hi,
I made once a document and a complete download package. Both of them would need
some updates but if you follow the instructions you should have a service
running within 10 minutes.
Document is here and it contains links for other downloads
Hi,
Server URL for GetCapabilities is
http://geoposer.com:443/server/services/osm.xml?service=WMS=version=1.1.1request=GetCapabilities
If you check the response you will see that the GetMap URL is
http://data1.geoposer.com:443/server/services/request.php?jname=/wms.img
Use that as your
Hi,
I checked my mapfiles and I have been using
CONNECTIONTYPE OGR
CONNECTION \ms4w\data\OSM_Suomi_20120213.sqlite
PROCESSING CLOSE_CONNECTION=DEFER
DATA select geometry, osm_id ,place , name from osm_point where place is not
null
Nothing so much different than what you have. The error you get
Hi,
How about doing two WFS requests in a row? In pseudo SQL
1) select geometry from town_polygons where town='my_town'
2) capture the geometry from the previous and use in the WFS Intersects filter
select * from my_features where [attribute filter] AND [Intersects filter
with
[mailto:mapserver-users-boun...@lists.osgeo.org] Puolesta Olivier Courtin
Lähetetty: 18. joulukuuta 2012 9:10
Vastaanottaja: Mapserver-Users (mapserver-users@lists.osgeo.org)
Aihe: Re: [mapserver-users] [TinyOWS] TinyOWS 1.1.0 and the old good axis order
trouble
On Mon, Dec 17, 2012 at 11:16 AM, Rahkonen Jukka
would have the same
understanding about the axis order.
-Jukka-
Rahkonen Jukka wrote:
Hi Olivier,
Sorry for the late response. I analyzed finally what axis order alternatives
the srs_wkt field in the spatial_ref_sys table contains and the situation is a
bit more complicated than you have
? If yes, stop, if no, call the WMS admin
and ask kindly to make it support.
-Jukka Rahkonen-
Rahkonen Jukka wrote:
Hi,
I am a WMS server admin myself and I would not be worried about such use.
They are just GetMaps and 20 or 100 GetMaps more in not an attack for my
mind. Think about any
Hi,
How about making an utility that captures the layer bounds from
GetCapabilities, takes the centre point of the bounds, checks the min/max scale
limits from the GetCapabilities and then calculates a reasonable BBOX and makes
a GetMap query with WIDTH=400 and HEIGTH=400. By increasing the
Hi,
Perhaps best written document that exist is this ticket started by someone
called aeichner
http://trac.osgeo.org/mapserver/ticket/2565
-Jukka Rahkonen-
Eichner, Andreas wrote:
apache module - mapserver
Is this functionality documented someplace? I couldn't find anything.
Not that
Hi,
Keep it simple and make two separate GetFeatures, one for each feature type.
-Jukka Rahkonen-
Arjen de Korte wrote:
Hi Steve,
Yes, for now I (my client) is stuck to this version, so a workaround (or
accepting that it can't be done) is the only option at the moment. Has this
been
Vastaanottaja: Rahkonen Jukka; Lime, Steve D (DNR); mapserver-
us...@lists.osgeo.org
Aihe: Re: [mapserver-users] WFS GetFeature with filter for multiple layers
Hi Jukka,
Thanks for the suggestion. I am already taking that into consideration (and
probably should have mentioned it). The problem
have
problems with urls that become too long.
Kind regards,
Arjen.
On Wed, Jan 23, 2013, at 12:03, Rahkonen Jukka wrote:
Hi,
Some thoughts:
- I am not a specialist with filters, but are you sure that your
filter is correct? I have some examples about filters in page
http
Hi,
Validation became compulsory in version 6.0. Read
http://mapserver.org/cgi/runsub.html#validation and add validation block for
percsize.
-Jukka Rahkonen-
Hans wrote:
hi
I am new in mapserver and testing with versions 5.2.2 and 6.2.0.
I found
Hi,
Looks like this:
http://trac.osgeo.org/gdal/ticket/4934
Thus once MS4W contains GDAL 1.10 is should work again.
By looking at your gml file I think it is generated by Mapserver, not SQL
server. Was the attachment correct?
-Jukka Rahkonen-
Moffatt,
Hi,
I have been running TinyOWS r558 for quite a long time because it is dealing
almost right with the axis order of the projections I am commonly using. Now I
had a fast try with the current TinyOWS 1.1.0 version but unfortunately I
realized that it is doing wrong thing by flipping the axis
Hi,
This request sends XML with just selected properties
http://hip.latuviitta.org/cgi-bin/tinyows?service=wfsversion=1.0.0request=GetFeaturetypename=lv:mml_railwayBBOX=246700,6780800,436400,6924000propertyname=sahko,the_geommaxfeatures=1
The same request with Json outpurformat gives all the
: 15. joulukuuta 2012 0:48
Vastaanottaja: Rahkonen Jukka
Kopio: mapserver-users@lists.osgeo.org
Aihe: Re: [mapserver-users] Reclassify raster cell values
Thank you Rahknonen,
However this is not quite what I expected. If I reclassify a particular value,
all other cells disapear.
This leads me
Hi,
It should be possible to do what you want by using the PROCESSING LUT option.
http://www.mapserver.org/input/raster.html
-Jukka Rahkonen-
ALT SHN wrote:
Hello Everyone,
First time Mapserver user here, and I would appreciate some advice regarding
this
Hi,
It can be good to know that according to OGC standards the layer names must not
start with a number or underscore. Most WMS clients do not care but there are
some schema validating WMS clients and more schema validating WFS clients
around which do not accept such names.
-Jukka Rahkonen-
Hi,
You should try to give more exact description about your problem. By reading
several mails which you have sent to MS4W list I believe that you are still
talking about the same images. That is 3-band, 8 bits per band images stored
into database as PostGIS raster and which you have tried to
aperi2007 wrote:
Il 13/11/2012 15:31, Rahkonen Jukka ha scritto:
Hi,
Our users are generally happy with non-overlapping labels but sometimes
they would rather see all the labels. Can it be controlled with SLD_BODY or do
I need to do a separate layer for drawing all the labels? We can
Hi,
Did you add the validation block that is needed in 6.x for ”fasokex”?
http://mapserver.org/cgi/runsub.html
You know for sure better than I why to use fasokex=”+fastsok+” instead of
fasokex=210176493
-Jukka Rahkonen-
Lars-Göran Edholm wrote:
Hi!
I have a problem with filters in Mapserver 6.
Hi,
I had a try with QGIS dev. and default Geoserver installation running on
localhost:8080. No trouble at all with WMS.
One thing I would check is if your Mapserver is sending correct onlineresource
for including the correct port with the GetCapabilities. You can override the
announced GetMap
Hi,
You can define your own outputformat for AGG/JPEG and use formatoption quality
http://www.mapserver.org/mapfile/outputformat.html
I do not know if variable substitution works in this place so that users could
add an extra parameter to the request as QUALITY=100 but you can have a try.
At
601 - 700 of 1366 matches
Mail list logo