http://www.gizmodo.com.au/2012/10/philips-hue-first-impressions-wi-fi-lighting-plus-fun/
Hendrik
who likes cool gizmos like this
___
http://www.okiebenz.com
For new and used parts go to www.okiebenz.com
To search list archives http://www.okiebenz.com/archive/
What you need is to look in the EPC and get the factory installation
instructions, then you'll have pictures and rough diagrams to give you the
design concept.
Trust me, three pieces SF steel, a receiver, draw bar with ball, you're done.
--
Max Dillon
Charleston SC
'95 E300
'87 300TD
Like the others said, the pictures are not good. You've got to want to
make people take the time out of their day to go look at and buy what
you're selling. Perhaps change the wording to say pre-EPA stove.
Sometimes people like the know the year of manufacture. That is probably
a $200 stove at
How does that old story go? My uncle in Chicago was a Republican until the
day he died. Then he became a Democrat.
-Original Message-
From: mercedes-boun...@okiebenz.com [mailto:mercedes-boun...@okiebenz.com]
On Behalf Of Rich Thomas
Sent: Monday, November 05, 2012 10:43 PM
To:
I didn't think replacing the engine mounts on the 300TD (NA) was that bad.
So I was encouraged to replace the mounts on the 300SD turbo. HA! Mucho
harder.
-Original Message-
From: mercedes-boun...@okiebenz.com [mailto:mercedes-boun...@okiebenz.com]
On Behalf Of Bob Rentfro
Sent: Monday,
Write-up and photos of my hitch installation (123 and 124) are awaiting
approval by list mommy.
Wilton
- Original Message -
From: Max Dillon meadedil...@bellsouth.net
To: Mercedes Discussion List mercedes@okiebenz.com
Sent: Tuesday, November 06, 2012 6:48 AM
Subject: Re: [MBZ] 240D
attachment was scrubbed...
Name: 123trailer.hitch.gif
Type: image/gif
Size: 11478 bytes
Desc: not available
URL:
http://mail.okiebenz.com/pipermail/mercedes_okiebenz.com/attachments/20121106/469401c4/attachment.gif
___
http://www.okiebenz.com
For new and used
I am in contact with a guy in Orlando who has several for a
sedan. I'm going down there to look at some other stuff for me so
if you want me to see how good they are and possibly get you one
let me know as well as how much you want to spend. Yeah I know
free would be good but probably won't
Amen brother Ben.
Manfred
Date: Tue, 6 Nov 2012 00:02:38 -0600
From: Fmiser fmi...@gmail.com
Subject: Re: [MBZ] 240D tow hitch or wagon?
MG wrote:
I think Max is talking about the hitch on a wagon and you are
talking about one on a sedan. The one that attaches to the
floor is in a sedan
On 06/11/2012 8:39 AM, Scott Ritchey wrote:
How does that old story go? My uncle in Chicago was a Republican until the
day he died. Then he became a Democrat.
Do you not have to produce ID at the polling station?
We have had to do that here for a number of years.
I find it annoying but I
Yes Manfred, that would be good. I'm interested in the euro style with the j
style hook. I'm not sure about the harness but that should probably come with
it? Seems like Oris is a good brand. Let me know what you find. Prob up to $75
but less would be better!
Sent from my iPhone
On Nov 6,
Even if it doesn't have a wiring harness, they are easy to do.
On Nov 6, 2012, at 12:14 PM, dsereta...@yahoo.com wrote:
Yes Manfred, that would be good. I'm interested in the euro style with the j
style hook. I'm not sure about the harness but that should probably come with
it? Seems like
In NC, no; just state full name and address.
Wilton
- Original Message -
From: Randy Bennell rbenn...@bennell.ca
To: Mercedes Discussion List mercedes@okiebenz.com
Sent: Tuesday, November 06, 2012 11:18 AM
Subject: Re: [MBZ] Vote!
On 06/11/2012 8:39 AM, Scott Ritchey wrote:
How
No way! We have to show drivers license and they run it through a reader. I
thought GA was backwards!
Rusty Cullens
buyMBparts, Inc.
6755 Peachtree Industrial Blvd.
Suite 260
Atlanta, GA 30360
800-741-5252
770-452-7320
-Original Message-
From: mercedes-boun...@okiebenz.com
Randy Bennell wrote:
On 06/11/2012 8:39 AM, Scott Ritchey wrote:
How does that old story go? My uncle in Chicago was a Republican
until the
day he died. Then he became a Democrat.
Do you not have to produce ID at the polling station?
We have had to do that here for a number of years.
I
Re. wiring harness: On my 123, I merely spliced into rear lights, signal
lights, etc., in trunk for a trailer receptacle mounted by the hitch.
'Planned to do same for 124, but I've needed the trailer so little for
several years, that I still haven't done it on 124. BTW, everything,
including
And they check it off against the voter registration list and present the
voter a numbered ballot.
Wilton
- Original Message -
From: WILTON wilt...@nc.rr.com
To: Mercedes Discussion List mercedes@okiebenz.com
Sent: Tuesday, November 06, 2012 12:34 PM
Subject: Re: [MBZ] Vote!
In
Oh, and sign a statement.
Wilton
- Original Message -
From: WILTON wilt...@nc.rr.com
To: Mercedes Discussion List mercedes@okiebenz.com
Sent: Tuesday, November 06, 2012 12:44 PM
Subject: Re: [MBZ] Vote!
And they check it off against the voter registration list and present the
voter
Nice to live in a small town. Walk in, say name, sign form, cast ballot,
leave. 2 minutes tops.
Mike
On Nov 6, 2012 12:47 PM, WILTON wilt...@nc.rr.com wrote:
Oh, and sign a statement.
Wilton
- Original Message - From: WILTON wilt...@nc.rr.com
To: Mercedes Discussion List
WILTON wrote:
Re. wiring harness: On my 123, I merely spliced into rear lights,
signal lights, etc., in trunk for a trailer receptacle mounted by the
hitch. 'Planned to do same for 124, but I've needed the trailer so
little for several years, that I still haven't done it on 124. BTW,
Mike,
I think your cabover iveco actually had a Fiat water cooled engine,
didn't it
We have a couple of cab overs here, belonging to a friend (one with a
rollback body).
They are Iveco Euro 15-14 and have Fiat water cooled engines to my
knowledge am i wrong here?
I'd like to get
I got Watched at the Poll by a Democrat Poll Watcher! I was intimidated!
--R
___
http://www.okiebenz.com
For new and used parts go to www.okiebenz.com
To search list archives http://www.okiebenz.com/archive/
To Unsubscribe or change delivery options go to:
/attachments/20121106/469401c4/attachment.gif
___
http://www.okiebenz.com
For new and used parts go to www.okiebenz.com
To search list archives http://www.okiebenz.com/archive/
To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman
/attachments/20121106/469401c4/attachment.gif
___
http://www.okiebenz.com
For new and used parts go to www.okiebenz.com
To search list archives http://www.okiebenz.com/archive/
To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo
Max Dillon wrote:
Perfect picture, but is that euro?
Sure looks like the euro hitch with integrated 50mm ball to me.
All the USA market hitches I've seen have balls on threaded shafts that bolt on
to a tongue or ball mount.
Mitch.
___
Cianci also has a daily radio show 3-6PM on WPRO 630 AM.
Dwight Giles
Wickford RI
On Sun, Nov 4, 2012 at 7:24 PM, Ronald Courcy tron...@hotmail.com wrote:
To set things straight Buddy Cianci is alive and well he does a
political television commentary everyday on a local television station.
On Tue, 06 Nov 2012 14:02:47 -0500 Mitch Haley m...@voyager.net wrote:
How do you handle the issue of separate brake and turn lamps on the car
vs combined stop/turn lamps on the trailer?
I added a separate light on each side for the turn signals on our trailer.
Now we have a Big Red Van (BRV
there are all kinds of trailer hitches on fleaBay, new for $148 elivered
used ones can probably be had for $50 if you are patient
and if you want to build your own, there are plenty of pictures to
look at for designs
thanks,
xx rick
Rick Hawkins
___
I'm in the process of installing a new outer window scraper on my 240D's driver
door but they seem a bit too long. Are these supposed to get trimmed. I got
them from Rusty and they are genuine MB parts.
Sent from my iPhone
___
http://www.okiebenz.com
For new
He's the one what should have been intimidated - could have died
laughing at one of your wry quips.
Speaking of which - I always thought Obama was black until I saw A
white president you can trust by Chris Rock on Jimmy Kimmel live.
http://www.youtube.com/watch?v=EDxOSjgl5Z4
On Tue, Nov 6,
Thanks for correcting me guys.
--
Max Dillon
Charleston SC
'95 E300
'87 300TD
MG trainpain2...@yahoo.com wrote:
Amen brother Ben.
Manfred
Date: Tue, 6 Nov 2012 00:02:38 -0600
From: Fmiser fmi...@gmail.com
Subject: Re: [MBZ] 240D tow hitch or wagon?
MG wrote:
I think Max is talking
Oris is OE, what you would have gotten from the dealer. IIRC, I bought a used
Oris for my euro 123 wagon.
--
Max Dillon
Charleston SC
'95 E300
'87 300TD
dsereta...@yahoo.com wrote:
So it seems like Oris was a German manufacturer of trailer hitches for
our cars but I'm not sure if they
You know, the funniest part of it was that while I was standing in line,
a friend/acquaintance and fellow agitator, a female lawyer flaming
liberal who used to be on County Council, comes into our little country
school to check on the checkers (there were no R checkers, just D
checkers). As
Three small, separate fixtures (two red, one yellow) mounted vertically on
each side of the trailer - tail light, brake light, signal light.
Wilton
- Original Message -
From: Mitch Haley m...@voyager.net
To: Mercedes Discussion List mercedes@okiebenz.com
Sent: Tuesday, November 06,
There's a guy up on eBay that's selling asco 7000 (non-SE rated) transfer
switches; 120/240VAC 2 pole (solid neutral) open transition 200A units in a
NEMA 3R double-door security type enclosure (outer door is blank 14 ga steel).
Of course this is only meaningful if your generator can be
What are all those liberals doing in SC? Strom would be outraged.
Gerry
From: Rich Thomas richthomas79td...@constructivity.net
You know, the funniest part of it was that while I was standing in line, a
friend/acquaintance and fellow agitator, a female lawyer flaming liberal
who used to be on
ASCO is a very good product, just about the best in the industry (other than
Russell).
I am familiar with the 7000 series - how much is he selling them for?
Dan
Sent from my iPad
On Nov 6, 2012, at 4:48 PM, John Reames jwrea...@comcast.net wrote:
There's a guy up on eBay that's selling asco
You know Ol' Strom broke the barrier back when, in more ways than one,
which at the time was a very liberal thing to do.
Ol' Strom's boy is running for State Senate, he is a scalawag/scoundrel
too, on the R side. Got his hands in the cookie jar too... Things here
are very weird, especially
Dan Penoff wrote:
ASCO is a very good product, just about the best in the industry (other than
Russell).
I am familiar with the 7000 series - how much is he selling them for?
Looks like $1100 shipped, or 400 less than my dad paid for his Generac with
transfer switch included. Of course you
Haven't hears much about your fractious governor either lately. She
was a hot pick for veep but somehow that idea had no traction. What's
she up to?
On Tue, Nov 6, 2012 at 5:34 PM, Rich Thomas
richthomas79td...@constructivity.net wrote:
You know Ol' Strom broke the barrier back when, in more
Simple little device called a taillight converter takes care of that.
Available anywhere towing accessories are sold.
Mike
On Nov 6, 2012 1:03 PM, Mitch Haley m...@voyager.net wrote:
WILTON wrote:
Re. wiring harness: On my 123, I merely spliced into rear lights, signal
lights, etc., in
Yeah, but doesn't it sound like it would be fun to have an extra light
back there like Wilton has?
Or, you could get some used tail lights from another MB and install them
so that they matched the car.
Randy
On 06/11/2012 5:47 PM, Michael Canfield wrote:
Simple little device called a
Canadian Researchers Fly On Pure Biofuel
Calling it a historic milestone for the aviation and sustainable energy
industries, Canada's National Research Council has conducted what it says is
the world's first civilian flight using 100 percent biofuel. Perhaps as a
measure of confidence in the
I will look for one when I go down there on Thur.
I don't think that the wiring harness will be available. I
haven't asked but got the impression from emailing that the items
are all off the cars and the rest of vehicle is no longer with us.
I'm hoping for about $50, that would leave $25 for
Well the state Dept of Revenue just got hacked, 3+M names, SS#s, all
that stuff poofed out into cyberspace. She waited 2 weeks to mention
it, so now the good ol boys have even more to slam her with, lawsuits,
finger-pointing, all that. She canceled a lot of her campaign
activities for Rmoney
I am going to build a combiner made of 4 relays to combine the
brake and blinker lights. This will be wired into the wires from
the car lights to the trailer plug.
You could also buy one from Walmart for $20. The only problem
with that one is that if you have a short in the wiring of your
That's what I would like to find or one by Curt (I think). It
fastens to the bumper attach points also. Only problem is it is
way to expensive so I may be making my own.
Manfred
Date: Tue, 06 Nov 2012 16:14:37 -0500
From: Max Dillon meadedil...@bellsouth.net
Subject: Re: [MBZ] 240D tow hitch
Thanks Manfred!
If shipping is more that's fine too.
Sent from my iPhone
On Nov 6, 2012, at 6:59 PM, MG trainpain2...@yahoo.com wrote:
I will look for one when I go down there on Thur.
I don't think that the wiring harness will be available. I haven't asked but
got the impression from
I tried, the firebrick fits in very tightly with very little gap. It appears
the easiest way to get the firebrick out is to turn the stove upside down.
It was easier to just muscle it into place.
-Curt
Date: Mon, 5 Nov 2012 19:26:14 -0700
From: Craig diese...@pisquared.net
To:
We don't have to sign anything but if you're in precinct 2 in my little town of
5,000 you have to stand in a 200 person line. Fortunately I'm in precinct 1,
zero line.
My street is 100 yards long with 6 houses, strangely only 2 are precinct 1...
-Curt
Date: Tue, 6 Nov 2012 12:47:10 -0500
Yes you do need to cut them. Tin snips will work. Or for a real
nice look a sharp knife and tin snips. A bit of black silicon at
the ends where it meets the track rubber only near the bottom, to
make it look smooth there.
Manfred
Date: Tue, 6 Nov 2012 15:11:43 -0500
From:
Thanks. Good to know.
Sent from my iPhone
On Nov 6, 2012, at 7:38 PM, MG trainpain2...@yahoo.com wrote:
Yes you do need to cut them. Tin snips will work. Or for a real nice look a
sharp knife and tin snips. A bit of black silicon at the ends where it meets
the track rubber only near the
Yes, Holeset HX30. A moderate improvement over stock with a few screws
turned in the pump..
The car on the dyno doing some lap time...
http://www.youtube.com/watch?v=WFTS2omcQOkfeature=share
http://www.youtube.com/watch?v=WFTS2omcQOkfeature=share
On 11/5/2012 4:41 AM, John Reames wrote:
And here he got lost in a parking lot...
-Rolf
On 11/6/2012 8:14 PM, Rolf wrote:
Yes, Holeset HX30. A moderate improvement over stock with a few screws
turned in the pump..
The car on the dyno doing some lap time...
http://www.youtube.com/watch?v=WFTS2omcQOkfeature=share
On Tue, 6 Nov 2012 15:19:09 -0800 Jerry Herrman jer...@san.rr.com
wrote:
OK, I.m confused. Is there a real Fleabay, or is it just a term for
Ebay to make it interesting (like when we write stealership)?
The latter.
Craig
___
http://www.okiebenz.com
For
The link would help...
http://www.youtube.com/watch?v=WFTS2omcQOk
On 11/6/2012 8:15 PM, Rolf wrote:
And here he got lost in a parking lot...
-Rolf
On 11/6/2012 8:14 PM, Rolf wrote:
Yes, Holeset HX30. A moderate improvement over stock with a few
screws turned in the pump..
The car on the
On Tue, 6 Nov 2012 18:55:46 -0500 (EST) relng...@aol.com wrote:
Following Leslie's Falcon was NRC's T-33 equipped with sniffer pods
that sampled the exhaust plume of the business jet. The data collected
by the antique fighter jet will be analyzed by NRC to see if the
emissions theory is
You don't have certification requirements for load bearing connections?
So who is responsible for buiding a crappy tow hitch and the thing
fails, trailer wipes out a car full of people.
Hendrik
who has legal tow hitches
On 07/11/12 01:42, Craig wrote:
On Tue, 06 Nov 2012 06:48:08 -0500 Max
http://seattle.craigslist.org/tac/cto/3388369821.html
I know we all saw this before, but there is just no way this car is going to
fetch anywhere close to asking. I do not care if it has gold plated during the
rebuild and Barry lost his virginity in the back seat.
clay
1974 450sl -
On Tue, 06 Nov 2012 19:13:00 -0500 MG trainpain2...@yahoo.com wrote:
I am going to build a combiner made of 4 relays to combine the
brake and blinker lights. This will be wired into the wires from
the car lights to the trailer plug.
In looking at the problem, I figured out how to do it with
Well, here's what I wrote re. my hitch for 123 and 124 yesterday. Photos
were attached and are in the system somewhere.
Wilton
- Original Message -
From: WILTON wilt...@nc.rr.com
To: Mercedes Discussion List mercedes@okiebenz.com
Sent: Monday, November 05, 2012 6:38 PM
Subject: Re:
BrakeTurnTrailer Lamp
00 0
01 1
10 1
11 0
Standard XOR logic function. You could consider
digital logic ($1 PIC?) driving one relay.
-- Jim
At HBL in Tysons Corner, VA last weekend I was told about a customer
who spent $65,000 restoring his 123 300TD turbo wagon.
On Tue, Nov 6, 2012 at 9:44 PM, clay monroe redgh...@comcast.net wrote:
http://seattle.craigslist.org/tac/cto/3388369821.html
I know we all saw this before, but there is
At HBL in Tysons Corner, VA last weekend I was told about a customer
who spent $65,000 restoring his 123 300TD turbo wagon.
and his name was andrew?
___
http://www.okiebenz.com
For new and used parts go to www.okiebenz.com
To search list archives
64 matches
Mail list logo
