useful. Low RPM hp
also equates to more torque. Torque gets things done, HP makes noise and
burns gas.
-Curt
Date: Wed, 20 Nov 2013 12:09:06 -0600
From: Randy Bennell rbenn...@bennell.ca
To: Mercedes Discussion List mercedes@okiebenz.com
Subject: Re: [MBZ] horsepower
Message-ID
I am not so sure that I agree with you all.
I can drive my old 300D and it does reasonably well, but there are times
when it could use a bit more. For example, pulling onto the highway from
a dead stop with a 90 degree turn and uphill for the next half mile or
so. I have to be careful not to
:09:06 -0600
From: Randy Bennell rbenn...@bennell.ca
To: Mercedes Discussion List mercedes@okiebenz.com
Subject: Re: [MBZ] horsepower
Message-ID: 528cfac2.70...@bennell.ca
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
I am not so sure that I agree with you all.
I can drive my old 300D
To: Mercedes Discussion List mercedes@okiebenz.com
Subject: Re: [MBZ] horsepower
Message-ID: 528cfac2.70...@bennell.ca
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
I am not so sure that I agree with you all.
I can drive my old 300D and it does reasonably well, but there are times
when it could
things done, HP makes noise and
burns gas.
-Curt
Date: Wed, 20 Nov 2013 12:09:06 -0600
From: Randy Bennell rbenn...@bennell.ca
To: Mercedes Discussion List mercedes@okiebenz.com
Subject: Re: [MBZ] horsepower
Message-ID: 528cfac2.70...@bennell.ca
Content-Type: text/plain; charset=ISO-8859-1
On Wed, Nov 20, 2013 at 7:43 PM, OK Don okd...@gmail.com wrote:
I think there are two ways to have fun driving - with lots of power to play
with, and with very little power, requiring you to get the max all the
time.
I'm pretty amused by the reviews of the new Toyota/Subaru joint-venture RWD
-ascii
Content-Disposition: inline
In-Reply-To: [EMAIL PROTECTED]
User-Agent: Mutt/1.4.2.1i
X-Antivirus-Scanner: Clean mail though you should still use an Antivirus
Subject: Re: [MBZ] horsepower
X-BeenThere: [EMAIL PROTECTED]
X-Mailman-Version: 2.1.6
Precedence: list
Reply-To: Mercedes mailing list
Ron Dwelle wrote:
Maybe we should be increasing the fuel temp on our old Benzes
I have a chunk of copper pipe of the proper diameter to replace the
straight section of my 300SD's upper radiator hose, but I haven't
gotten around to fooling with it. I intend to wrap a coil of copper
I think the rating is related to fuel that has been formulated for
winter use, not the actual fuel temperature. To prevent gelling
components are added to the fuel that lower the BTU rating of the fuel
and thus the HP available to be extracted from it. Though, I can see
by the last line of your
I have a chunk of copper pipe of the proper diameter to replace the
straight section of my 300SD's upper radiator hose, but I haven't
gotten around to fooling with it. I intend to wrap a coil of copper
tubing around it and run the fuel through it.
I used to think of going that way, or of using
I think the rating is related to fuel that has been formulated for
winter use, not the actual fuel temperature.
I don't know. Perhaps the 10% is due to better atomization at that
hotter temperature, resulting in a better burn. Gelling doesn't
happen anywhere near the mentioned 25-40 degC
On Thu, 8 Dec 2005 18:29:00 -0800 Jim Cathey [EMAIL PROTECTED] wrote:
I have heard that your fuel BTU's weigh in at about 1/3 torque,
1/3 as waste water heat, and 1/3 as waste exhaust heat.
That's what I have heard as a good rule of thumb, too.
Craig
Ron Dwelle wrote:
I was just looking at the specs for some new small marine diesels, from
Yanmar. I noticed that they list two different horsepower ratings for
different fuel temperature. For example, the engine I was looking at
produces 20 HP with the fuel temp at 25 centigrade and 22 HP with
Craig McCluskey wrote:
On Thu, 8 Dec 2005 18:29:00 -0800 Jim Cathey [EMAIL PROTECTED] wrote:
I have heard that your fuel BTU's weigh in at about 1/3 torque,
1/3 as waste water heat, and 1/3 as waste exhaust heat.
That's what I have heard as a good rule of thumb, too.
So why is Jim
There you go. It's called cogeneration, and exactly the setup you
describe is how you do it. Folks off the grid, mostly in other
countries, have been doing this for a long time.
Craig McCluskey wrote:
On Thu, 8 Dec 2005 18:29:00 -0800 Jim Cathey [EMAIL PROTECTED] wrote:
I have heard
So why is Jim only using the 1/3 mechanical energy to heat his house?
He could put the radiator in the basement and capture another 3rd,
maybe combine it with a water cooled exhaust.
A variety of reasons that add up to 'don't do this', in my case.
1) I want the big noisy generator away from
the
radiator into a plenum and blowing air over it to heat the house.
WAY COOL STUFF Mike
- Original Message -
From: Mitch Haley [EMAIL PROTECTED]
To: Mercedes mailing list [EMAIL PROTECTED]
Sent: Friday, December 09, 2005 6:21 AM
Subject: Re: [MBZ] horsepower
Craig McCluskey wrote
to be
about a foot long at most and weighs 18#. Cost is $130 Cdn.
Randy
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Mitch Haley
Sent: Thursday, December 08, 2005 5:08 PM
To: Mercedes mailing list
Subject: Re: [MBZ] horsepower
Ron Dwelle wrote:
Maybe we
18 matches
Mail list logo