Re: [Mikrotik] IPsec tunnel drops and requires flush

Hi Jerry. I hadn't used IPSEC on 5.26 so I can't advise about any bugs back then that may now be fixed. Another thing is to never assume the other end doesn't also have bugs. The only time require vs unique should come into play would be when there were more than one subnet at one end of

Re: [Mikrotik] IPsec tunnel drops and requires flush

Hi Alexander, Thanks for the quick response. We are running 5.26 on all 750's and the firmware is 3.19. There is an initial tunnel that has been up on these boxes to a Juniper that never goes down. The tunnel to the Cisco was added months later and of course to different subnet. So I see the

Re: [Mikrotik] IPsec tunnel drops and requires flush

ment was scrubbed... > URL: > <http://mail.butchevans.com/pipermail/mikrotik/attachments/20160526/ced13d69/attachment.html> > ___ > Mikrotik mailing list > Mikrotik@mail.butchevans.com > http://mail.butchevans.com/mailma

Re: [Mikrotik] 5HacT 2.4 GHz Chan 6 not possible?

Hi Benoit Can you please advise which version of RouterOS you have installed on this device? Which RouterBoot version is running (System > RouterBoard)? And which wireless package you are using? Regards Alexander > On 27/05/2016, at 02:28, Benoit Panizzon wrote: > >

[Mikrotik] IPsec tunnel drops and requires flush

tik/attachments/20160526/ced13d69/attachment.html> ___ Mikrotik mailing list Mikrotik@mail.butchevans.com http://mail.butchevans.com/mailman/listinfo/mikrotik Visit http://blog.butchevans.com/ for tutorials related to Mikrotik RouterOS

[Mikrotik] 5HacT 2.4 GHz Chan 6 not possible?

Hi all I got one of the newer 5HAcT Routerboards. In the 2.4GHz Band I usually use channels 1,6,11 to use non overlapping channels. Of course I know that in N (40MHz Mode) the signal overlaps the upper or lower channel too. So as I had another AP on chan 1. I wanted to set the Mikrotik on Chan