Working over here.
Chris Wright
Network Administrator
Velociter Wireless
209-838-1221 x115
-Original Message-
From: mikrotik-boun...@mail.butchevans.com
[mailto:mikrotik-boun...@mail.butchevans.com] On Behalf Of Josh Luthman
Sent: Monday, April 13, 2015 12:17 PM
To: Mikrotik discussions
company. Any thoughts
would be appreciated.
--
Chris Gotstein, Network Engineer, U.P. Logon/Computer Connection U.P.
http://uplogon.com | +1 906 774 4847 | ch...@uplogon.com
___
Mikrotik mailing list
Mikrotik@mail.butchevans.com
http
I PPPOE at the AP.
Chris
-Original Message-
From: mikrotik-boun...@mail.butchevans.com
[mailto:mikrotik-boun...@mail.butchevans.com] On Behalf Of Kevin Sullivan
Sent: Tuesday, November 25, 2014 2:36 AM
To: Mikrotik discussions
Subject: Re: [Mikrotik] Low power Mikrotik
Are you using
I have a ccr1036 fully offgrid running 6.19 and I'm not having any problems
with it. I have 6 radios and 4 fiber connections on it.
Chris
Sent via the Samsung Galaxy Note® 3, an ATT 4G LTE smartphone
div Original message /divdivFrom: Kevin Sullivan
kevin.sulli
benoit.paniz...@imp.ch /divdivDate:11/07/2014 2:16 AM (GMT-06:00)
/divdivTo: Mikrotik discussions mikrotik@mail.butchevans.com
/divdivSubject: Re: [Mikrotik] NTP DDOS Attack /divdiv
/divHi Chris
Anyone else having NTP based ddos attacks? Any suggestions on how to
prevent them?
Is your NTP Server
Anyone else having NTP based ddos attacks? Any suggestions on how to prevent
them?
Thanks,
Chris
___
Mikrotik mailing list
Mikrotik@mail.butchevans.com
http://mail.butchevans.com/mailman/listinfo/mikrotik
Visit http://blog.butchevans.com
Is the wireless interface connected to anything? Is it even enabled? If so you
should be able to connect it to another unit and mac telnet into it.
Sent via the Samsung Galaxy Note® II, an ATT 4G LTE smartphone
div Original message /divdivFrom: Scott Reed
sr...@nwwnet.net
Yep, I agree. Although I don't seem to have luck with the actual buttons that
they are putting on these. I just end up shorting the pads.
Chris
-Original Message-
From: mikrotik-boun...@mail.butchevans.com
[mailto:mikrotik-boun...@mail.butchevans.com] On Behalf Of Josh Luthman
Sent
defaulted the RB and resetup the hotspot and it worked fine. Well apparently
it has stopped working again.. Any help!!!
Chris
___
Mikrotik mailing list
Mikrotik@mail.butchevans.com
http://mail.butchevans.com/mailman/listinfo/mikrotik
Visit http
So after coming over to this hotel and playing with things, my observation
is that the redirection stops working until you manually go to the
mikrotik hotspot page. This it seems to start working again.
Chris
6.7 ?
-Original Message-
From: mikrotik-boun...@mail.butchevans.com
I would just run a cable and plug in another 751, 951, etc. I sometimes will
just run one over POE and then you can just set it on top of a shelf or in a
closet.
Chris
-Original Message-
From: mikrotik-boun...@mail.butchevans.com
[mailto:mikrotik-boun...@mail.butchevans.com] On Behalf
I just run a mini-itx box with ROS installed. I just never did like how it
performed on an XP machine.
Chris
-Original Message-
From: mikrotik-boun...@mail.butchevans.com
[mailto:mikrotik-boun...@mail.butchevans.com] On Behalf Of Josh Luthman
Sent: Wednesday, November 06, 2013 5:42 PM
I have a 411uahr with a Sierra Wireless MC7700 miniPCIe card that I am
trying to get it configured and connected to ATT. I have the APN entered
that ATT said to use. I get the ppp-out1 to connect and receive and IP until
I try to ping out and then it disconnects immediately.
Thanks!
Chris
Mini PCIExpress cards. It's a standoff and screw that fastens them down.
Chris
-Original Message-
From: mikrotik-boun...@mail.butchevans.com
[mailto:mikrotik-boun...@mail.butchevans.com] On Behalf Of Grand Avenue
Broadband
Sent: Saturday, August 24, 2013 11:43 AM
To: Mikrotik
cannot pull an ip address from the AP. If I mess
around with scanning and connecting to the AP, it will eventually get an
IP. I'm running 6.1 software, and the AP is secured with WPA2. Anyone
seen this issue?
--
Chris Gotstein, Network Engineer, U.P. Logon/Computer
433ah, but you will probably have to change the enclosure since the form factor
is different.
Chris
Sent via the Samsung Galaxy Note® II, an ATT 4G LTE smartphone
Original message
From: Rick Smith onyx3...@gmail.com
Date: 06/11/2013 11:23 AM (GMT-06:00)
To: Mikrotik
433ah's usually have more ram and a bigger on board storage. The ram seems to
make the most difference in performance.
Chris
Sent via the Samsung Galaxy Note® II, an ATT 4G LTE smartphone
Original message
From: Josh Luthman j...@imaginenetworksllc.com
Date: 06/11/2013 11
On Tue, Jun 11, 2013 at 12:55 PM, Rick Smith onyx3...@gmail.com wrote:
the ram is why we went with the 532's yrs ago. looks like the 433ah
will fit in the enclosures we use
thanks guys
R
On Jun 11, 2013, at 12:44 PM, Chris Hudson ch...@htswireless.com wrote:
433ah's usually have more ram
USB GPS adapter for time.
--
Christopher Tyler
MTCRE/MTCNA/MTCTCE/MTCWE
Total Highspeed Internet Services
417.851.1107
- Original Message -
From: Tayeb Meftah tayeb.mef...@gmail.com
To: Mikrotik discussions mikrotik@mail.butchevans.com
Sent: Wednesday, May 29, 2013 6:23:00 AM
I get mine from Mouser.com
680uf 6.3V
647-UHE0J681MPD
On 411's I was also replacing the 35V caps with these:
667-EEU-HD1V331
Chris
Can anyone recommend a replacement part for the 560uF 6.3V capacitors on
faulty 493/450 boards?
Thank you,
Scott Kress
3Design Group
/25/2013 11:48 AM, Josh Luthman wrote:
Any idea what kind of volts and amp/watt?
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Mon, Mar 25, 2013 at 12:46 PM, Chris Gotstein ch...@uplogon.com wrote:
I'm looking for a small office router with PoE
You have open the case and use the reset pads located on the board. Just short
out the two copper landings.
--
Christopher Tyler
MTCRE/MTCNA/MTCTCE/MTCWE
Total Highspeed Internet Services
417.851.1107
- Original Message -
From: Ty Featherling tyfeatherl...@gmail.com
To: Mikrotik
I was able to use attr_rewrite in freeradius to modify the NAS port ID
with a unique number, that seems to have fixed my issue.
On 1/2/2013 6:24 PM, Blake Covarrubias wrote:
On Dec 31, 2012, at 11:05 AM, Chris Gotstein ch...@uplogon.com wrote:
Is there a way in FreeRadius to add a unique
?
--
Chris Gotstein, Network Engineer, U.P. Logon/Computer Connection U.P.
http://uplogon.com | +1 906 774 4847 | ch...@uplogon.com
___
Mikrotik mailing list
Mikrotik@mail.butchevans.com
http://mail.butchevans.com/mailman/listinfo/mikrotik
Visit http
It's always by default been 115200 8n1.
Chris
-Original Message-
From: mikrotik-boun...@mail.butchevans.com
[mailto:mikrotik-boun...@mail.butchevans.com] On Behalf Of Josh Luthman
Sent: Friday, November 09, 2012 2:24 PM
To: Mikrotik discussions
Subject: Re: [Mikrotik] Opening console
And you are using a null modem cable, right?
-Original Message-
From: mikrotik-boun...@mail.butchevans.com
[mailto:mikrotik-boun...@mail.butchevans.com] On Behalf Of Josh Luthman
Sent: Friday, November 09, 2012 2:54 PM
To: Mikrotik discussions
Subject: Re: [Mikrotik] Opening console on
, Nov 9, 2012 at 4:20 PM, Chris Hudson ch...@htswireless.com
wrote:
And you are using a null modem cable, right?
-Original Message-
From: mikrotik-boun...@mail.butchevans.com [mailto:
mikrotik-boun...@mail.butchevans.com] On Behalf Of Josh Luthman
Sent: Friday, November 09
www.arecontvision.com has really good IP cameras for stationary use and
www.vivotek.com makes some 20x 2mp cameras and some 36x D1 PTZ cameras.
Chris
-Original Message-
From: mikrotik-boun...@mail.butchevans.com
[mailto:mikrotik-boun...@mail.butchevans.com] On Behalf Of Butch Evans
Sent
anywhere on the network. Anyone every setup a
MT router hotspot with a Cisco WLAN Controller?
--
Chris Gotstein, Network Engineer, U.P. Logon/Computer Connection U.P.
http://uplogon.com | +1 906 774 4847 | ch...@uplogon.com
___
Mikrotik
Any supplier on those?
Chris
-Original Message-
From: mikrotik-boun...@mail.butchevans.com
[mailto:mikrotik-boun...@mail.butchevans.com] On Behalf Of Rick Smith
Sent: Wednesday, August 22, 2012 5:10 PM
To: Mikrotik discussions
Subject: Re: [Mikrotik] SFP module for RB2011
I haven't had
I don't consider myself an expert, but I'm more than happy to assist. What is
the problem?
--
Christopher Tyler
MTCRE/MTCNA/MTCTCE/MTCWE
Total Highspeed Internet Services
417.851.1107
- Original Message -
From: Paul McCall pa...@pdmnet.net
To: Mikrotik discussions
:54 AM
Subject: Re: [Mikrotik] Need OSPF help !
Chris,
We have a main BH down on a tower, and for some reason, the OSPF
didn't get setup on it's desired second link (I think we had planned
a better 2nd link and it never got done I discovered). It does
have a weak 3rd leg on the Uplink side
Tyler
MTCRE/MTCNA/MTCTCE/MTCWE
Total Highspeed Internet Services
417.851.1107
- Original Message -
From: Paul McCall pa...@pdmnet.net
To: Mikrotik discussions mikrotik@mail.butchevans.com
Sent: Monday, July 23, 2012 11:17:54 AM
Subject: Re: [Mikrotik] Need OSPF help !
Chris,
We
dr=Designated Router
--
Christopher Tyler
MTCRE/MTCNA/MTCTCE/MTCWE
Total Highspeed Internet Services
417.851.1107
- Original Message -
From: Chris Tyler ch...@totalhighspeed.net
To: Mikrotik discussions mikrotik@mail.butchevans.com
Sent: Monday, July 23, 2012 11:22:12 AM
Subject
...@mail.butchevans.com] On Behalf Of Paul
McCall
Sent: Monday, July 23, 2012 12:18 PM
To: Mikrotik discussions
Subject: Re: [Mikrotik] Need OSPF help !
Chris,
We have a main BH down on a tower, and for some reason, the OSPF
didn't get setup on it's desired second link (I think we had planned
a better 2nd
assistance!
-Original Message-
From: mikrotik-boun...@mail.butchevans.com
[mailto:mikrotik-boun...@mail.butchevans.com] On Behalf Of Chris
Tyler
Sent: Monday, July 23, 2012 12:20 PM
To: Mikrotik discussions
Subject: Re: [Mikrotik] Need OSPF help !
IPV4 Multicast not being blocked
+1 on this one. Makes recovering from an upstream line issue very interesting…
On 02/12/2011, at 10:43 AM, Tristram Cheer wrote:
Hi Guys,
Bit of an odd one, Does anyone know why in ROS 5.x the PPPoE client doesn't
die if the connection is cut off but the interface it's attached to remains
We've had pretty good luck with it and xbox.
Sent from my Samsung Galaxy S II on ATT
Original message
Subject: [Mikrotik] Mikrotik UPNP
From: john j...@rcsaccess.net
To: mikrotik@mail.butchevans.com
CC:
I looked in the archives and on the net and I can't find a place
Check out www.sunelec.com
Chris
-Original Message-
From: mikrotik-boun...@mail.butchevans.com
[mailto:mikrotik-boun...@mail.butchevans.com] On Behalf Of Bill Prince
Sent: Friday, September 23, 2011 9:49 PM
To: mikrotik@mail.butchevans.com
Subject: Re: [Mikrotik] Good source for solar
Not much help here, but I think net install will only work on ether1. I
haven't had much luck with net install on win7 either. I haven't tried it on
a 750, do they automatically check for net install??
Chris
-Original Message-
From: mikrotik-boun...@mail.butchevans.com
[mailto:mikrotik
Anyone have this for 433's?
Chris
-Original Message-
From: mikrotik-boun...@mail.butchevans.com
[mailto:mikrotik-boun...@mail.butchevans.com] On Behalf Of Martín Ruiz
[Ibersystems.es]
Sent: Tuesday, August 16, 2011 1:26 AM
To: Mikrotik discussions
Subject: Re: [Mikrotik] Chuck you have
Are there different labeled board location for FB601? Or is not marked? I
can find U601 and D601, but not FB601.
Chris
-Original Message-
From: mikrotik-boun...@mail.butchevans.com
[mailto:mikrotik-boun...@mail.butchevans.com] On Behalf Of Martín Ruiz
[Ibersystems.es]
Sent: Tuesday
Yeah, I got the pdf attachment, but you have to follow a link lower on the
email.
http://www.butchevans.com/pipermail/mikrotik/attachments/20110816/08533f4c/
attachment.pdf
Chris
-Original Message-
From: mikrotik-boun...@mail.butchevans.com
[mailto:mikrotik-boun...@mail.butchevans.com
Can you screen capture the log?
Chris
-Original Message-
From: mikrotik-boun...@mail.butchevans.com
[mailto:mikrotik-boun...@mail.butchevans.com] On Behalf Of Don Gould
Sent: Tuesday, August 09, 2011 7:55 PM
To: Mikrotik discussions
Subject: [Mikrotik] How to set up a PPPoE server on RB
to be the correct line not the latter.
Could you screen capture the Log screen.
Chris
-Original Message-
From: mikrotik-boun...@mail.butchevans.com
[mailto:mikrotik-boun...@mail.butchevans.com] On Behalf Of Don Gould
Sent: Tuesday, August 09, 2011 8:30 PM
To: mikrotik@mail.butchevans.com
Click on Log on the left menu in the Mikrotik.
chris
-Original Message-
From: mikrotik-boun...@mail.butchevans.com
[mailto:mikrotik-boun...@mail.butchevans.com] On Behalf Of Don Gould
Sent: Tuesday, August 09, 2011 8:29 PM
To: mikrotik@mail.butchevans.com
Subject: Re: [Mikrotik] How
Good, that's progress. I don't play with ecb's so I don't know much about
them. Although I wonder what interface the ecb is trying to connect on?..
The ether or wlan?
Chris
-Original Message-
From: mikrotik-boun...@mail.butchevans.com
[mailto:mikrotik-boun...@mail.butchevans.com
Do you use pppoe? I have scene odd issues that sound just like that. I have
since dropped my mtu/mru to 1412.
Chris
Scott Kress sc...@kressintegrated.com wrote:
The system has been working for about 6 months, then stopped working
today. I am not sure what is happening. Tracert dies at 14
I upgrade from 3.30 to 4.17 all the time.
Josh Luthman j...@imaginenetworksllc.com wrote:
I can't say exactly why, but I can tell you I was told to do it that way and
always have. If you want to jump straight to 4.17 I would expect you would
be fine, but if it doesn't come back don't say you
Any issues with downgrading from 5.2 to 4.17 on a 433AH board? Having
some funky issues with wireless since going to 5.2. Will the config
remain in place after the downgrade?
--
Chris Gotstein, Network Engineer, U.P. Logon/Computer Connection U.P.
http://uplogon.com | +1
Answered my own question. Downgrading worked perfectly from 5.2 to
4.17, no config loss.
On 5/18/2011 10:31 AM, Chris Gotstein wrote:
Any issues with downgrading from 5.2 to 4.17 on a 433AH board? Having
some funky issues with wireless since going to 5.2. Will the config
remain in place after
I think so.
-Original Message-
From: Micah Miller
Sent: Tuesday, April 26, 2011 12:56 PM
To: Mikrotik discussions
Subject: [Mikrotik] netinstall question
I have a rb750g that the password has been lost on. I know that there
is a .backup file on the router that has the known
So all I hear is bugs, bugs, bugs... What are these issues? I have a Smaller
AP running 13 clients, PPPOE, RC1. I haven't scene anything out of the
ordinary.
Chris
-Original Message-
From: Tristram Cheer
Sent: Friday, March 25, 2011 4:37 PM
To: Mikrotik discussions
Subject: Re
Ok, yeah I'm just running nstreme at the moment.
Chris
-Original Message-
From: Butch Evans
Sent: Friday, March 25, 2011 6:04 PM
To: Mikrotik discussions
Subject: Re: [Mikrotik] 5betaReleaseXX
On 03/25/2011 05:46 PM, ch...@htswireless.com wrote:
So all I hear is bugs, bugs, bugs
We are doing 5ghz 20mhz channels running nstreme. So far seems good. I may,
for the hell of it, upgrade to some newer firmware.
Chris
-Original Message-
From: Robert Andrews
Sent: Friday, March 25, 2011 7:12 PM
To: Mikrotik discussions
Subject: Re: [Mikrotik] 5betaReleaseXX
I have probably 500 or more in the field, and when we hit around 0degrees I
maybe lost 2 or 3. I think one of those was a 411r which are complete crap.
Chris
Scott Reed sr...@nwwnet.net wrote:
I have a couple hundred 411s out as CPE in central Indiana and have lost
only 3 or 4 since the rain
information will be appreciated.
regards
Chris
-- next part --
An HTML attachment was scrubbed...
URL:
http://www.butchevans.com/pipermail/mikrotik/attachments/20101223/359f6475/attachment.html
___
Mikrotik mailing list
That's odd, we run 411AH and 433AH with no issues down to -20 and
colder. Been in the air for over 2 years. Knock on wood...
Chris Gotstein, Network Engineer, U.P. Logon/Computer Connection U.P.
http://uplogon.com | +1 906 774 4847 | ch...@uplogon.com
On 12/1/2010 6:04 PM
All ours have a single XR2 radio in them.
Chris Gotstein, Network Engineer, U.P. Logon/Computer Connection U.P.
http://uplogon.com | +1 906 774 4847 | ch...@uplogon.com
On 12/1/2010 6:14 PM, Robert Andrews wrote:
With or without radios? Radios may add a lot of heat to keep
Ok, i f*up'd the name of the device. I meant to write Netequalizer, not
netspective.
Chris Gotstein, Network Engineer, U.P. Logon/Computer Connection U.P.
http://uplogon.com | +1 906 774 4847 | ch...@uplogon.com
On 10/5/2010 2:18 PM, Chris Gotstein wrote:
Ran into a very
___
Mikrotik mailing list
Mikrotik@mail.butchevans.com
http://www.butchevans.com/mailman/listinfo/mikrotik
Visit http://blog.butchevans.com/ for tutorials related to Mikrotik RouterOS
--
Chris Gotstein, Network Engineer, U.P. Logon/Computer Connection U.P.
http://uplogon.com | +1
. The price on the
CPQ-15f/SL2-15f is perfect and competitive with a Bullet2 w/ 16db panel.
Chris Gotstein, Sr Network Engineer, UP Logon/Computer Connection UP
http://uplogon.com | +1 906 774 4847 | ch...@uplogon.com
On 4/21/2010 12:39 PM, Josh Luthman wrote:
Does Tranzeo work
About a year ago we stopped using encryption between our APs and
clients. There were to many issues between different vendors that would
cause things to break. Since dropping encryption, we've have far less
issues with radio's locking up or having trouble connecting.
Chris
Ah! my bad. In that situation, i have run into some older or odd gear
that didn't like or didn't offer the option of AES when using WPA/WPA2.
On the n gear i've never run into an issue with WPA2 using AES and i
almost always configure it for AES.
Chris Gotstein, Sr Network
Is the list active? I'm pretty sure i'm subscribed to it. I miss the
tranzeo list from Part-15.
Chris Gotstein, Sr Network Engineer, UP Logon/Computer Connection UP
http://uplogon.com | +1 906 774 4847 | ch...@uplogon.com
On 4/21/2010 2:25 PM, D. Ryan Spott wrote
on 192.168.1.1, i cannot access the other devices behind
the RB, ie 192.168.1.2. If i run the scan tool from the RB, it can see
the devices. Not really sure what i'm missing here. Any thoughts?
--
Chris Gotstein, Sr Network Engineer, UP Logon/Computer Connection UP
http
I'll give that a try. Just don't understand why it works on all the
other VPNs i've setup.
Chris Gotstein, Sr Network Engineer, UP Logon/Computer Connection UP
http://uplogon.com | +1 906 774 4847 | ch...@uplogon.com
On 4/5/2010 11:16 AM, Josh Luthman wrote:
Make your VPN
That was it. Thanks.
Chris Gotstein, Sr Network Engineer, UP Logon/Computer Connection UP
http://uplogon.com | +1 906 774 4847 | ch...@uplogon.com
On 4/5/2010 11:51 AM, Josh Luthman wrote:
Look for Butch's video he posted a few weeks ago about ARP proxy.
Josh Luthman
Same reason here, IPv6 over PPoE. I don't understand why they couldn't
just add the features they listed to the 4.x train?
Chris Gotstein, Sr Network Engineer, UP Logon/Computer Connection UP
http://uplogon.com | +1 906 774 4847 | ch...@uplogon.com
On 3/31/2010 9:57 AM, Josh
Tried that, both switch and rb. no difference.
Chris Gotstein, Sr Network Engineer, UP Logon/Computer Connection UP
http://uplogon.com | +1 906 774 4847 | ch...@uplogon.com
On 3/25/2010 11:06 AM, Robert Andrews wrote:
Try setting the speed to either 10 or 100 mb/s instead
Always need to lock ports between switches, routers, etc. Been doing
Cisco long enough to know that. Usually don't have to many problems
with auto-negotiate on workstations and other end devices as long as the
software on the switch is up-to-date.
Chris Gotstein, Sr Network
Not sure what you mean? Been using Cisco switches/routers since 1998,
never had any major issues with them. But they are definitly not plug
and play. They have their quirks, but usually it's a config problem or
a software upgrade needed.
Chris Gotstein, Sr Network Engineer
Is there still a motorola canopy list out there? I know Part-15 used to
have one, but i thought there were more.
--
Chris Gotstein, Sr Network Engineer, UP Logon/Computer Connection UP
http://uplogon.com | +1 906 774 4847 | ch...@uplogon.com
Thanks Josh.
Chris Gotstein, Sr Network Engineer, UP Logon/Computer Connection UP
http://uplogon.com | +1 906 774 4847 | ch...@uplogon.com
On 3/3/2010 3:44 PM, Josh Luthman wrote:
Best bet would be
motor...@afmug.com
Just email motorola-subscr...@afmug.com to subscribe
Lol, yeah, i see that.
Chris Gotstein, Sr Network Engineer, UP Logon/Computer Connection UP
http://uplogon.com | +1 906 774 4847 | ch...@uplogon.com
On 3/3/2010 4:09 PM, Josh Luthman wrote:
I warn you now it is very chatty in both respects =)
Josh Luthman
Office: 937-552
Not sure if this helps your exact situation, but I have a Router Board,
running in bridge mode, that I use for a server firewall. To have ability
to bypass firewall rules, I VPN to RB using Windows VPN client. I added a
private 10.0.0.0 network to my RB LAN interface. Also added a 10.0.0.0
Can't get to Mikrotik's site to download the latest RouterOS software.
Doesn't Butch have a mirror site for the latest software releases?
--
Chris Gotstein, Sr Network Engineer, UP Logon/Computer Connection UP
http://uplogon.com | +1 906 774 4847 | ch...@uplogon.com
thank you!
Chris Gotstein, Sr Network Engineer, UP Logon/Computer Connection UP
http://uplogon.com | +1 906 774 4847 | ch...@uplogon.com
On 2/24/2010 12:49 PM, Josh Luthman wrote:
http://www.butchevans.com/MT_Software/
Josh Luthman
Office: 937-552-2340
Direct: 937-552
I'm looking to setup a MT router for going VPN connections. Is there
any way to pass authentication from the MT to an Active Directory domain
controller?
--
Chris Gotstein, Sr Network Engineer, UP Logon/Computer Connection UP
http://uplogon.com | +1 906 774 4847 | ch
Lol, i just found that as well.
Chris Gotstein, Sr Network Engineer, UP Logon/Computer Connection UP
http://uplogon.com | +1 906 774 4847 | ch...@uplogon.com
On 2/16/2010 4:54 PM, Josh Luthman wrote:
That's it! IAS!
http://en.wikipedia.org/wiki
Wow, very easy to setup. Took me about 10 mins and i'm authenticating
to AD using the MT VPN. Perfect.
Chris Gotstein, Sr Network Engineer, UP Logon/Computer Connection UP
http://uplogon.com | +1 906 774 4847 | ch...@uplogon.com
On 2/16/2010 4:55 PM, Chris Gotstein wrote
domain and choose United States, but that doesn't seem to
have any affect on the frequencies available. Seems like a MT bug.
Chris Gotstein, Sr Network Engineer, UP Logon/Computer Connection UP
http://uplogon.com | +1 906 774 4847 | ch...@uplogon.com
On 2/8/2010 2:49 PM, Chris
Do you know about how much bandwidth you are pushing through each VPN?
Chris Gotstein, Sr Network Engineer, UP Logon/Computer Connection UP
http://uplogon.com | +1 906 774 4847 | ch...@uplogon.com
On 2/4/2010 1:04 PM, Hilton J Ralphs wrote:
I have a client with 4 remote
Thanks for all the feedback. I'm going to order up the parts and give
it a try. (on the bench first).
Chris Gotstein, Sr Network Engineer, UP Logon/Computer Connection UP
http://uplogon.com | +1 906 774 4847 | ch...@uplogon.com
On 1/29/2010 3:53 PM, Chuck Hogg wrote:
I
I'm currently running 10Mhz with 10Mhz spacing on the the tranzeo AP and
CPEs. Hoping a MT AP would support the same setup with an XR5 radio.
Chris Gotstein, Sr Network Engineer, UP Logon/Computer Connection UP
http://uplogon.com | +1 906 774 4847 | ch...@uplogon.com
On 1/29
. Measuring MOS like Josh suggested is a good start to
see of the link will be able to handle a voice connection.
Chris Gotstein, Sr Network Engineer, UP Logon/Computer Connection UP
http://uplogon.com | +1 906 774 4847 | ch...@uplogon.com
On 1/27/2010 7:02 PM, Jayson Baker
it syncs with the AP. Not sure
is ap wds and station wds act the same though.
On 12/2/09, Chris Gotstein ch...@uplogon.com wrote:
I keep hearing that it cuts your bandwidth in half on the AP side.
Seems everyone (vendors) i talk to tells me to stay away from it.
Robert Andrews
@mail.butchevans.com
http://www.butchevans.com/mailman/listinfo/mikrotik
Visit http://blog.butchevans.com/ for tutorials related to Mikrotik
RouterOS
--
Chris Gotstein
Sr Network Engineer
UP Logon/Computer Connection UP
500 N Stephenson Ave
Iron Mountain, MI 49801
Phone: 906-774-4847
Fax: 906-774-0335
ch
is
that all VPN connections are reset.
Does anyone know of a way to reset a single VPN connection without bringing
down all connected VPN's?
Chris Chandler
-- next part --
An HTML attachment was scrubbed...
URL:
http://www.butchevans.com/pipermail/mikrotik/attachments
channels.
We do DHCP for all our end users, and hand out static IPs via dhcp to
those with different speed packages. I would like to someday start
using RADIUS to do some authentication, but our current billing program
makes it a chore to setup and use.
Chris Gotstein, Sr
It was something like that. I'll have to play a bit.
Chris Gotstein
Sr Network Engineer
UP Logon/Computer Connection UP
500 N Stephenson Ave
Iron Mountain, MI 49801
Phone: 906-774-4847
Fax: 906-774-0335
ch...@uplogon.com
Josh Luthman wrote:
Iirc something like
Set [find] forwarding=yes
Use
What is the difference between short and long preamble?
Chris Gotstein
Sr Network Engineer
UP Logon/Computer Connection UP
500 N Stephenson Ave
Iron Mountain, MI 49801
Phone: 906-774-4847
Fax: 906-774-0335
ch...@uplogon.com
Steve Barnes wrote:
Thanks a bunch. That means those are ones that my
Ouch, that wasn't so nice!
Yes, i do know how to use google, but was hoping someone would just give
me a quick explanation, as in real world experience.
Chris Gotstein
Sr Network Engineer
UP Logon/Computer Connection UP
500 N Stephenson Ave
Iron Mountain, MI 49801
Phone: 906-774-4847
Fax: 906
I've been setting it to auto, does it matter a whole lot 1 way or the
other? Are others forcing the preamble?
Chris Gotstein
Sr Network Engineer
UP Logon/Computer Connection UP
500 N Stephenson Ave
Iron Mountain, MI 49801
Phone: 906-774-4847
Fax: 906-774-0335
ch...@uplogon.com
Josh Luthman
Maybe worth locking it to long for PtP links and leaving it auto for
Client to AP?
Chris Gotstein
Sr Network Engineer
UP Logon/Computer Connection UP
500 N Stephenson Ave
Iron Mountain, MI 49801
Phone: 906-774-4847
Fax: 906-774-0335
ch...@uplogon.com
Josh Luthman wrote:
Every customer I have
Guess there's the flip side to using short though on the PtP's, but on
my tranzeo gear, i can only lock to long.
Chris Gotstein
Sr Network Engineer
UP Logon/Computer Connection UP
500 N Stephenson Ave
Iron Mountain, MI 49801
Phone: 906-774-4847
Fax: 906-774-0335
ch...@uplogon.com
Josh Luthman
it's easy to do in winbox. Just add the last ip column.
Chris Gotstein
Sr Network Engineer
UP Logon/Computer Connection UP
500 N Stephenson Ave
Iron Mountain, MI 49801
Phone: 906-774-4847
Fax: 906-774-0335
ch...@uplogon.com
D. Ryan Spott wrote:
How do I get the Last IP for a registered client
After i wrote that, i figured you already knew it!
Chris Gotstein
Sr Network Engineer
UP Logon/Computer Connection UP
500 N Stephenson Ave
Iron Mountain, MI 49801
Phone: 906-774-4847
Fax: 906-774-0335
ch...@uplogon.com
D. Ryan Spott wrote:
Yeah. I need to do this in an automated fashion
problem seems to be with WPA/AES and/or WPA2
Robert Andrews wrote:
that's a rog...
Chris Gotstein wrote:
wpa tkip?
Robert Andrews wrote:
No we do wpa, not wpa2 either... just wpa. Chris Gotstein wrote:
you doing AES though??
Robert Andrews wrote:
MT and tranzeo with WPA work great here
There are issues with 4.0.2 if you are running WPA/AES on the Tranzeo
devices. Otherwise, i've been running 3.24 and 4.0.2 without encryption
without any problems.
Chris Gotstein
Sr Network Engineer
UP Logon/Computer Connection UP
500 N Stephenson Ave
Iron Mountain, MI 49801
Phone: 906-774
1 - 100 of 202 matches
Mail list logo