On Wed, Aug 02, 2006 at 01:02:31AM -0500, the unit calling itself Jacob
Yocom-Piatt wrote:
> >
> >I need to support mail for mobile users. Consensus appears to be that
> >this is best done w/ a combination of SASL (authentication) & STARTTLS
> >(encryption). However, sendmail isn't compiled with
On Wed, 2 Aug 2006, Nik Lam wrote:
> Does anyone have any advice on which one of these two CF GPRS cards would be
> better (mainly for use with a Zaurus SL-C3200)?
>
> Pretec CompactGPRS
> http://www.expansys.com.au/product.asp?code=106282&tab=2
>
> Audiovox RTM-8000
> http://www.umd.com.au/itd/
On Wed, 2 Aug 2006, J Moore wrote:
Perhaps I'm reading too much into this, but is this because there are
issues with SASL? Or is there a "better way" to provide smtp services
for mobile users?
Add
WANT_SMTPAUTH=Yes
in /etc/mk.conf and recompile sendmail.
See /usr/src/gnu/usr.sbin/sendmail/send
On 8/2/06, Sigfred Heversen <[EMAIL PROTECTED]> wrote:
Siju George wrote:
> Hi,
>
> What subversion ( GUI ) clients do you use on your OpenBSD systems?
> Seems there is none on 3.9 ports and I will have to compile from source.
> Will 4.0 have any subversio client in ports?
Subclipse (Java) was v
Hi,
I am trying some porting examples to winscw and I have a question:
Why is it that the MetroWerks CodeWarrior 3.1 cannot handle the following?
in header file (pcb.h):
int in_baddynamic (u_int16_t, u_int16_t);
in c file (pcb.c)
int
in_baddynamic (a, b)
u_int16_ta;
u_
Hi,
Slackware! It is Linux in BSD-Style. So you have the benefit that
commercial software will run without emulation if you need to.
Installation is easy and the default configuration is very reasonably.
Regards
Stefan Kell
On Wed, 2 Aug 2006, Damon McMahon wrote:
> Greetings,
>
> Please accep
Damien Miller wrote:
On Wed, 2 Aug 2006, Nik Lam wrote:
Does anyone have any advice on which one of these two CF GPRS cards would be
better (mainly for use with a Zaurus SL-C3200)?
Pretec CompactGPRS
http://www.expansys.com.au/product.asp?code=106282&tab=2
Audiovox RTM-8000
http://www.umd.
On Wed, 2 Aug 2006, Michael C wrote:
> Hi,
>
> I am trying some porting examples to winscw and I have a question:
>
> Why is it that the MetroWerks CodeWarrior 3.1 cannot handle the following?
>
> in header file (pcb.h):
> intin_baddynamic (u_int16_t, u_int16_t);
>
> in c file (pcb.c)
> in
On Tue, Aug 01, 2006 at 03:57:34PM -0500, Jacob Yocom-Piatt wrote:
> Original message
> >Date: Tue, 01 Aug 2006 19:19:11 +0200
> >From: chefren <[EMAIL PROTECTED]>
> >Subject: Re: OpenBSD's own compiler
> >To: misc@openbsd.org
> >
> >On 08/01/06 16:48, Anton Karpov wrote:
> >
> >> Thi
On Tue, 1 Aug 2006, pedro la peu wrote:
> On Tuesday 01 August 2006 13:01, Diana Eichert wrote:
>
> > I want to put a bi-quad at the focal point of an 18" parabolic dish at
> > either end.
>
> If that combination is necessary a ralink radio is likely a poor choice.
I could do it with bi-quads onl
On 8/2/06, Diana Eichert <[EMAIL PROTECTED]> wrote:
On Tue, 1 Aug 2006, pedro la peu wrote:
> If that combination is necessary a ralink radio is likely a poor choice.
I could do it with bi-quads only on either end but by using the parabolic
I focus the radio signal minimimizing other radios seei
On Wednesday 02 August 2006 03:26, Titan wrote:
> I have quite a predicament. I have been tasked with setting up an FTP
> server for the research group I'm involved with. The problem is once
> I'm gone someone with no *NIX experience will be maintaining the
> server.
Does the ftp have to run on
scene: home webserver (athlon 1,2Mz via chipset, lan realtek) dmesg at
the end of email.
OpenBSD 3.9 (GENERIC) #617: Thu Mar 2 02:26:48 MST 2006
The server is conected to a 3com superstack hub, and witouth
keyboard/screen, managed with ssh.
Packet Filter is disable on this machine.
Uptimes are a
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Try replacing the rl0 nic. I had similar problems. Random freezing of my
server. After replacing the rl0 nic everyting went back to normal.
Inigo Tejedor Arrondo wrote:
> scene: home webserver (athlon 1,2Mz via chipset, lan realtek) dmesg at
> the end
hi
i got after an cvs update to current an compiler error
/usr/src/sys/arch/amd64/compile/fw >make depend
mkdir -p /usr/src/sys/arch/amd64/compile/fw/lib/kern
depending the kern library objects
depending the compat library objects
sh /usr/src/sys/arch/amd64/compile/fw/../../../../kern/genassym.s
On 8/2/06, holger glaess <[EMAIL PROTECTED]> wrote:
>
> hi
>
> i got after an cvs update to current an compiler error
>
> /usr/src/sys/arch/amd64/compile/fw >make depend
> mkdir -p /usr/src/sys/arch/amd64/compile/fw/lib/kern
> depending the kern library objects
> depending the compat library object
> i got after an cvs update to current an compiler error
[...]
> cc1: error: unrecognized option `-Wstack-larger-than-2047'
> *** Error code 1
>
> Stop in /usr/src/sys/arch/amd64/compile/fw (line 581 of Makefile).
>
>
> any clue for me ?
http://www.openbsd.org/faq/current.html#20060727
Miod
On Wed, 2 Aug 2006, holger glaess wrote:
i got after an cvs update to current an compiler error
/usr/src/sys/arch/amd64/compile/fw >make depend
mkdir -p /usr/src/sys/arch/amd64/compile/fw/lib/kern
depending the kern library objects
depending the compat library objects
sh /usr/src/sys/arch/amd64/
Anwyay. With "fresh" routing table - let's assume that the only thing there
is localhost. When you did:
$ ifconfig sk0 192.168.50.1
$ ifconfig sk1 192.168.50.2
The first command would add something like:
192.168/255.255.0.0 link#1 UC sk0
Flag C (check netstat man page) is important
Over the course of a month I had my 3 x86 test machines break down on me. I am
therefore in need of an x86 box. I preferably need an amd64 (so that I can
develop for both x86 and amd64) box that has PCIe and PCIX slots in it.
Anyone willing to donate a box? or individual parts?
Please contact
On 08/01/06 22:57, Jacob Yocom-Piatt wrote:
this is the funniest post i've read on misc@ in a while.
That was why I put "Amen" below it...
..
sounds like it's already under way with google "monitor me six ways from sunday"
desktop. overt centralization of anything is dangerous, especially c
Hi Stuart.
I received the NIC today.
The chip is found and seems to be working well, caught with the 82541GI
driver as you said.
I'm running 3.9 release.
The chip is a 82541PI as my supplier stated.
I don't know if the man page should be updated, or if anything else is
needed.
I'll be available
On Wed, 2 Aug 2006, NetNeanderthal wrote:
chuckle
> A bit off-topic from misc@, but you might consider purchasing a
> professional-grade antenna. I believe that pacwireless.com sells most
> in the 2.4GHz range at or under $65 USD that will more than suffice (I
> am unaffiliated). I advise again
Attached is a excerpt of /var/log/messages showing the KVM switch to
and from a computer named honey.
You can see that uhidev2 normally comes back up but sometimes says "no
report descriptor". When it does, this USB port is dead and doesn't
come back. I have to connect the keyboard to another por
El mii, 02-08-2006 a las 18:01 +0300, Andrei GUDIU escribis:
> -BEGIN PGP SIGNED MESSAGE-
> Hash: SHA1
>
> Try replacing the rl0 nic. I had similar problems. Random freezing of my
> server. After replacing the rl0 nic everyting went back to normal.
Well, now i have some 3Com 3c905C-TX/TX-
On Tue, Aug 01, 2006 at 08:53:15PM -0400, Jeff Quast wrote:
> On 8/1/06, andrew fresh <[EMAIL PROTECTED]> wrote:
> >I am in need the ability to run a script when a cd is inserted. I am
> >not finding any way of getting notified when that happens, so I am
> >asking here. If not, I can just loop cd
On 8/2/06, Diana Eichert <[EMAIL PROTECTED]> wrote:
Thank you for your concerns, but I can honestly say I have access to some
of the best machine tools in the world.
You're welcome, and I've blessed every last soothsayer's soul that has
told me exactly that! Nevertheless, I suppose your ... r
On Wed, Aug 02, 2006 at 06:04:19PM +0200, Michal Soltys wrote:
> [ reminder about the routing table works ]
Whoops, you're right. It wasn't anything specific to sk0 and sk1, just
because of how I assigned IP addresses.
> Small correction to my prev post - messing with route / PF to enforce goin
Update on this: It also causes the system to crash apparently. It did not crash
previously, before the KVM, and now it has a few times while connected to the
KVM and writing to a umass device. I am doing a massive rsync/rsnapshot at the
same time to a umass device.
I'm going to try it without
On Wed, 2 Aug 2006, NetNeanderthal wrote:
> On 8/2/06, Diana Eichert <[EMAIL PROTECTED]> wrote:
> > Thank you for your concerns, but I can honestly say I have access to some
> > of the best machine tools in the world.
>
> You're welcome, and I've blessed every last soothsayer's soul that has
> tol
Hello together,
I hope this is the right place for my questions.
At the moment I'm playing around with OpenBSD on a WRAP system.
I want it to be a firewall, reverse-proxy (for Outlook Web Access)
and as VPN Gateway. My problem is, that I'm only able to
install openbsd on an compact flash card usin
2006/8/2, chefren <[EMAIL PROTECTED]>:
>
> On 08/01/06 22:57, Jacob Yocom-Piatt wrote:
>
> > this is the funniest post i've read on misc@ in a while.
>
> That was why I put "Amen" below it...
>
> ..
A little bit of trolling never hurts anyone ;)
Thanks to all the OpenBSD developers that brought up mpi(4). I just had
an opportunity to try yesterday's 4.0-beta amd64 snapshot on a system that
didn't work with mpt(4), everything worked AOK. Thanks also to brad@ for
the NIC driver work he does, my Intel 10G NIC is supported also.
diana
dmes
> I focus the radio signal minimimizing other radios seeing the signal
> from the sides.
I use an(4)'s antenna diversity to similar effect. Either way, good ears
need less signal.
Hi,
I recently got a Mac Book from Apple with the latest and greatest
Mac OS X installed on it. I have a setup where I connect the mac book
to an wlan accesspoint which is connected to an openbsd 3.9-current
machine which should provide connectivity to the Mac Book over an
IPSec tunnel.
I have lo
On 8/2/06, Diana Eichert <[EMAIL PROTECTED]> wrote:
We like to do things with commodity
hardware, well let's just say that are "interesting", right now we want to
push wireless across a "desert", with gear we don't care about losing.
It sounds fascinating -- do keep us updated on how OpenBSD
fi
I'm using a pf to round-robin redirect incoming requests (in this case
http) to a pf address pool.
I'm using pf to perform redirection in this situation instead of using
a proxy specifically to avoid the source addresses in the log files as
being that of the proxy server. I'm aware of tools that
On Wed, 2 Aug 2006, NetNeanderthal wrote:
> On 8/2/06, Diana Eichert <[EMAIL PROTECTED]> wrote:
> > We like to do things with commodity
> > hardware, well let's just say that are "interesting", right now we want to
> > push wireless across a "desert", with gear we don't care about losing.
>
> It so
From: [EMAIL PROTECTED]
> CARP comes very close to solving the problem, but it's not specific to
> individual tcp ports afaik. So it would help if a box becomes
> completely unreachable, but if only the service stops working it's not
> that useful.
>
> Essentially I'm looking for a very simple da
On Aug 2, 2006, at 7:53 PM, ben wrote:
I'm using a pf to round-robin redirect incoming requests (in this case
http) to a pf address pool.
I'm using pf to perform redirection in this situation instead of using
a proxy specifically to avoid the source addresses in the log files as
being that of t
On 8/1/06, Shane J Pearson <[EMAIL PROTECTED]> wrote:
Hi Chris,
On 2006.08.01, at 2:00 PM, Chris Zakelj wrote:
> Went back about two years in the MARC archives with the terms 'copy
> drive' (oddly enough, 'dd' itself wouldn't work), and got plenty of
> linux examples on Google (that pretty much
Hi,
I'm trying to build 3.9 release from sources, running 3.9.
After cvsup from rt.fm, I followed instructions in release(8):
# cd /usr/obj && mkdir -p .old
# mv * .old && sudo rm -rf .old
# cd /usr/src && nice make obj
# cd /usr/src/etc && env DESTDIR=/ sudo make distrib-dirs
# cd /usr/sr
Hello,
As we are working on a driver for TI (Texas Instruments) based WLAN
CardBus/PCI devices, we are looking for some more of those in
Switzerland for our developers. Especially such with a acx111 chipset
for CardBus.
If you would be able to deliver such a device to Switzerland, please
contact
At 12:16 PM 8/2/2006 -0700, andrew fresh wrote:
> I never checked for CD's, but hotplugd might say something when it is
> inserted, I know it works for USB disks.
AFAIK hotplug only works for drives not disks. My testing just now
shows that hotplugd does not see an event when I put in a CD
Yo
Hi,
I'm trying to install OpenBSD 3.9 -release onto a HP ProLiant DL360 G4
server. I get a "no disk found" message after the install?> question.
The system has an Intel 6300ESB/82801FR SATA Controller and is running a
single Maxtor SATA HDD. I think if I could set the controller to
"compatibil
Inigo Tejedor Arrondo wrote:
scene: home webserver (athlon 1,2Mz via chipset, lan realtek) dmesg at
the end of email.
OpenBSD 3.9 (GENERIC) #617: Thu Mar 2 02:26:48 MST 2006
The server is conected to a 3com superstack hub, and witouth
keyboard/screen, managed with ssh.
Packet Filter is disable
I recently purchased a USB serial adapter, which is currently showing up as:
ugen0 at uhub0 port 1
ugen0: ArkMicroChips USB-UART Controller, rev 1.10/0.01, addr 3
usbdevs -v reports:
port 1 addr 3: full speed, power 500 mA, config 1, USB-UART
Controller(0x0232), ArkMicroChips(0x6547), rev 0.
On Aug 2, 2006, at 7:51 PM, Diana Eichert wrote:
On Wed, 2 Aug 2006, NetNeanderthal wrote:
On 8/2/06, Diana Eichert <[EMAIL PROTECTED]> wrote:
We like to do things with commodity
hardware, well let's just say that are "interesting", right now
we want to
push wireless across a "desert", with
On Wednesday, August 2, 2006, 03:16:01, Stefan Kell wrote:
> Slackware! It is Linux in BSD-Style.
I can second this recommendation. When I went searching for a linux
distro I could live with for setting up an asterisk pbx slackware was
the one I found to be the most BSD like.
--
[EMAIL P
On 8/2/06, ben <[EMAIL PROTECTED]> wrote:
I'm using a pf to round-robin redirect incoming requests (in this case
http) to a pf address pool.
I'm using pf to perform redirection in this situation instead of using
a proxy specifically to avoid the source addresses in the log files as
being that of
Hi,
I had some suggestions and was able to solve this issue by using the
-current snapshot.
Thanks,
Edward
Edward Avent wrote:
Hi,
I'm trying to install OpenBSD 3.9 -release onto a HP ProLiant DL360 G4
server. I get a "no disk found" message after the install?> question.
The system has an
On Wed, 2 Aug 2006, Nik Lam wrote:
> Very helpful info Damien, thanks.
>
> What's the longest that you've been able to stay online for at a stretch using
> only the zaurus battery?
At least an hour, but I have never really timed it.
-d
52 matches
Mail list logo
