Hi,
What kind of Ralink chipset does it have?Alix has a usb port but I prefer
miniPCI.
Thank you
2010/5/25 Nenhum_de_Nos
> On Mon, May 24, 2010 17:10, Piotr Komborski wrote:
> > Hello,
> >
> > I'm going to set OpenBSD based AP on ALIX board. I've red ral(4) and
> > ath(4)
> > manpages but men
Using iperf, I get around 300 mbits/s. between my openbsd machine and
my windows xp machine and also to my imac with os x. I tried the
kernel tweaks mentioned here:
https://calomel.org/network_performance.html, but they did not help a
whole lot (before tweaks I was getting around 220 mbits/s).
In
On Tue, 25 May 2010 00:54:53 +0200 patrick kristensen
wrote:
> 2010/5/24, J.C. Roberts :
> >
> > I realize you must be frustrated while learning something new, but
> > I am frustrated by you not paying attention. Now let's look at what
> > I wrote one more time:
> >
> >>> set ifaddr 10.0.0.1
On Mon, May 24, 2010 at 05:34:18PM -0700, Robert Bruce Carleton wrote:
> I'm having trouble creating a mpe interface on OpenBSD 4.7. What I've done so
> far is recompile the kernel with option MPLS. I've also enabled forwarding
> and mpls in the /etc/sysctl.conf. I've also been able to configure
I'm having trouble creating a mpe interface on OpenBSD 4.7. What I've done so
far is recompile the kernel with option MPLS. I've also enabled forwarding
and mpls in the /etc/sysctl.conf. I've also been able to configure and start
ldpd and use "ldpctl show" to display the status of ldpd. I used
lheck...@users.sourceforge.net writes:
> I've used the same pf.conf for years with only minimal changes, but 4.7
> broke it, and I can't seem to fix it.
>
> The OBSD machine is a firwall between a cable modem and a private IP LAN.
> Previously, I used these rules to allow ssh access from speci
On Mon, May 24, 2010 17:10, Piotr Komborski wrote:
> Hello,
>
> I'm going to set OpenBSD based AP on ALIX board. I've red ral(4) and
> ath(4)
> manpages but mentioned mPCI card models are really hard to find on the
> market. I found only Ralink RT2800 based Sparklan WMIR-200N which is too
> expens
Hello,
I have Alix 2D3 (and another 2D13) with Tonze PC-620C miniPCI. It mostly
works ok, but I am still hunting some problem - one or two times for a
month it falls to ddb> prompt. I build OpenBSD completelly from cvs just
about every month - it seems it is time for new build of -current.
Best r
I didn't get the importance of having different addresses in part#1
and #2 and assumed from 'ifconfig tun0' [ ... ] inet 95.124.11.167 -->
10.0.0.2 netmask 0xfff [ ... ] that HISADDR did not change to a
valid one. I should have understood you were telling me the correct
syntax literally. I see
I realize you must be frustrated while learning something new, but I am
frustrated by you not paying attention. Now let's look at what I wrote
one more time:
>> set ifaddr 10.0.0.1/0 10.0.0.2/0 0.0.0.0 0.0.0.0
>> part#1 part#2 part#3 part#4
The first chunk of
Madame, Monsieur,
Nous sommes heureux de vous informer de la parution de AmarrC) C un
corps-mort de Jean-Pierre Barbier Jardet. Toutes les informations que vous
souhaiteriez recevoir concernant son acquisition sont consignC)es dans le
document que vous pourrez dC)rouler ci-aprC(s et au bas duquel
Experience a better way to connect people, ideas and
information.
Acrobat Dynamic PDF 2010 enables you to connect, interact, and engage in
powerful new ways. Streamline how you work, collaborate more easily, and create
high impact communications. Designed to meet the needs of today's business,
Hello,
I'm going to set OpenBSD based AP on ALIX board. I've red ral(4) and ath(4)
manpages but mentioned mPCI card models are really hard to find on the
market. I found only Ralink RT2800 based Sparklan WMIR-200N which is too
expensive for me (60$).
Can anybody recommend me 802.11g miniPCI card
Hi all,
That's a pleasure got in the OpenBSD main list, that is my first time.
But I thing anyone has a question like that. The problem is: I am trying
to implement ntop in OpenBSD, but the version we have on repository
"pkg" is very old, and the interface of that version is a little bit
over. A
On Mon, May 24, 2010 at 11:29:51AM -0400, Michael Seney wrote:
> I have to disable ACPI in order to boot OpenBSD 4.7 on this laptop. I
> don't really mind but can this harm the hardware?
>
Why do you have to disable it? What's the panic/problem etc.
dmesg, acpidump...
On Sun, May 23, 2010 at 3:10 PM, Henning Brauer wrote:
>> match to $peer_2 prefix X.Y.Z.0/23 set localpref +50
>>
>> But it wont work as I need. Please remember X.Y.Z.0/23 is announced by me.
>
> localpref for outgoing? that is useless. localpref is, well, local,
> and not transmitted to the peer.
On May 24 11:29:51, Michael Seney wrote:
> I have to disable ACPI in order to boot OpenBSD 4.7 on this laptop. I
> don't really mind but can this harm the hardware?
Of course; things burn. Nice laptop you got there ...
I can take it under my protection for $1000 a week.
I have to disable ACPI in order to boot OpenBSD 4.7 on this laptop. I
don't really mind but can this harm the hardware?
Halens T|rkiye : Kvyalt} Mevki Cemal Ulusoy
Caddesi Asena Sok. No : 9 Kat : 3 34197
Yenibosna / ]stanbul T|rkiye
CEO: Matthias Fink, Ticaret Sicil Numaras} 694704
HALENS DANI^MA HATTI
09:30 - 12:30 / 13:30 - 17:30
i...@halens.com.tr
Telif hakk} 2
Hi all,
I have some problems with CARP (I can't get it working).
this is my current configuration:
# sysctl net.inet.ip.forwarding
net.inet.ip.forwarding=1
# sysctl net.inet.carp
net.inet.carp.allow=1
net.inet.carp.preempt=1
net.inet.carp.log=2
# cat /etc/hostname.carp1
inet 172.16.0.1 255.255.
Hi Claudio,
Thanks, I'll report back to you after I'm done with my first test.
On Mon, 24 May 2010 20:11:46 +0700, Claudio Jeker
wrote:
On Mon, May 24, 2010 at 05:23:00PM +0700, Insan Praja SW wrote:
Hi Misc@,
Before I begin to test OpenBGPD mpls VPN support on current, is
there any hints
On Mon, May 24, 2010 at 05:23:00PM +0700, Insan Praja SW wrote:
> Hi Misc@,
> Before I begin to test OpenBGPD mpls VPN support on current, is
> there any hints on route-leaking, and an example/hints to make a
> complete setup MPLS cloud and MPLS/VPN on a network.
>
> In my later experiences using
2010/5/24 J.C. Roberts :
> On Mon, 24 May 2010 00:00:07 +0200 patrick kristensen
> wrote:
>> I have managed to get a working connection with the following script
>>
>>
>> /etc/ppp/ppp.conf
>>
>> default:
>> set log Phase Chat LCP IPCP CCP tun command
>> set device /dev/cuaU0
>> set speed 460800
http://www.openbsd.org/faq/faq1.html#Included
"Our improved and secured version of the Apache 1.3 web server. The
OpenBSD team has added default chrooting, privilege revocation, and
other security-related improvements. Also includes mod_ssl and DSO
support. "
The httpd included by default in
Il 24/05/10 12.44, Jozsi Vadkan ha scritto:
I want to use a secure web server on OpenBSD.
It's a real generalistic idea.
It would serve only static html filest, no cgi, no php, etc.
It just have to be secure, no need to be fast, just secure [only using
it with https].
What you mean
On 24/05/2010 11:44, Jozsi Vadkan wrote:
> I want to use a secure web server on OpenBSD.
>
> It would serve only static html filest, no cgi, no php, etc.
>
> It just have to be secure, no need to be fast, just secure [only using
> it with https].
>
> What would be the best web server software?
>
I want to use a secure web server on OpenBSD.
It would serve only static html filest, no cgi, no php, etc.
It just have to be secure, no need to be fast, just secure [only using
it with https].
What would be the best web server software?
nginx?
apache?
lighthttpd?
Thank you for any proposals.
On Mon, May 24, 2010 at 01:24:26AM +0400, Vadim Jukov wrote:
>
> Then maybe, you'll show us output of:
>
> 1. cat /etc/pf.conf
> 2. pfctl -f /etc/pf.conf && pfctl -sr
> 3. pfctl -o none -f /etc/pf.conf && pfctl -sr
Today it works without the quick. I don't know why, but it works now.
Sorry for
Hi Misc@,
Before I begin to test OpenBGPD mpls VPN support on current, is there any
hints on route-leaking, and an example/hints to make a complete setup MPLS
cloud and MPLS/VPN on a network.
In my later experiences using OpenBSD, I use pf with rtable to make a
VPN-like network without iso
On Mon, May 24, 2010 at 03:07:27AM +0400, ba...@yandex.ru wrote:
> mount_portal work? if yes, then give some working(tested) example for fs,
> please
To the best of my knowledge, it hasn't been seriously used/maintained in
ages. It may work, but use something else if at all possible.
Hi,
On Mon, 24 May 2010 12:31:56 +0700, Bret S. Lambert
wrote:
On Mon, May 24, 2010 at 12:52:39AM +0200, Roger Schreiter wrote:
Hi,
we've been running a BGP router on OpenBSD for
the months without problems.
Now it crashed two times within 4 days. After the
second crash, I could have a lo
31 matches
Mail list logo
