On Sat, Nov 26, 2011 at 10:46 PM, quartz wrote:
>> put a 5.0 kernel in the root directory of your file system with the name
>> "bsd50". B At the "boot>" prompt, do a "boot bsd50". B If the kernel loads
>> all the way, it's just an issue with the bsd.rd kernel. B if it doesn't,
>> it's a 5.0-rel is
On Sat, Nov 26, 2011 at 7:31 PM, Ted Unangst wrote:
> On Sat, Nov 26, 2011, Luis Useche wrote:
>> For a project I need to single step a user space process while
>> executing the fault handler. I was thinking that probably ddb single
>> stepping can be reused but this is probably for kernel single
I had leased line Before and had NAT server with openBSD and before l
FreeBSD NAT before
On Nov 27, 2011 2:24 AM, "rancor" wrote:
> What do you know?
> Den 26 nov 2011 23:44 skrev "Gholam Mostafa Faridi" <
> mostafafar...@gmail.com>:
>
>> we had Leased line before and we had 27 static IPs before
On Sat, Nov 26, 2011 at 10:37:10PM +0100, Pieter Verberne wrote:
> Hello,
>
> I configured my Soekris net5501 as a switch and access point. I
> briged all four vr(4) devices and ral0. vr0 (10.0.0.1) is connected
> to the router. ral0 is configured as an access point.
>
> This is the configuration
Traditionally, the OpenBSD 802.11 wireless device drivers do not support power
saving mode in host AP mode. This makes an OpenBSD-based wireless AP nearly
unusable for those wireless clients that can not disable power saving mode on
their end. Unfortunately, with a large fraction of the clients f
On Sat, Nov 26, 2011, Luis Useche wrote:
> For a project I need to single step a user space process while
> executing the fault handler. I was thinking that probably ddb single
> stepping can be reused but this is probably for kernel single stepping
> only. How about ptrace?
I am officially confus
What do you know?
Den 26 nov 2011 23:44 skrev "Gholam Mostafa Faridi" :
> we had Leased line before and we had 27 static IPs before , but our ISP do
> not support is very well , and we change our ISP and we buy ADSL connection
> with 10 static IPs , my NAT Server is OpenBSD 5 , before we change ou
we had Leased line before and we had 27 static IPs before , but our ISP
do not support is very well , and we change our ISP and we buy ADSL
connection with 10 static IPs , my NAT Server is OpenBSD 5 , before we
change our connection type from Leased line to ADSL , we have cisco 800
router and L
I'm looking to set up a small-sized wifi network with wpa2 enterprise.
does anyone know of a lightweight authentication software package for
this? all I can find in the ports tree is freeradius, but I'm looking for
something easier to administer... something along the lines of dnsmasq
with a simple
> put a 5.0 kernel in the root directory of your file system with the name
> "bsd50". At the "boot>" prompt, do a "boot bsd50". If the kernel loads
> all the way, it's just an issue with the bsd.rd kernel. if it doesn't,
> it's a 5.0-rel issue.
that's obvious and I should have thought of that m
Hello,
I configured my Soekris net5501 as a switch and access point. I briged
all four vr(4) devices and ral0. vr0 (10.0.0.1) is connected to the
router. ral0 is configured as an access point.
This is the configuration I want. An access point with no IP address.
$ cat /etc/hostname.ral0
medi
Hi Guys,
For a project I need to single step a user space process while
executing the fault handler. I was thinking that probably ddb single
stepping can be reused but this is probably for kernel single stepping
only. How about ptrace?
Any ideas on this?
Thanks for the help,
Luis.
On 11/26/11 00:21, quartz wrote:
how "safe" are those two images? would it be ok to run on a production
system or should I wait for the official 5.0 stable branch?
>
> different version of the same question:
>
> if I'm lazy, can I cheat by booting off a new install50 or cd50 snapshot,
>
b...e
fg(e
!e,e8d8d8d;#ge(e=eg e8<>f.-i-g(-e ,<>
g9f0e:,i* h/f i.i"ed;f,>,100%f>e?.e&f i e/f %g5f4=h0...
e< `R:1.3.4.2.8.6.6.9.5.5.9QQ:9 0 8 1 9 9 5 8 8
Si no puede ver este anuncio, haga click aqum
Si no ves correctamente este mail visita la versisn online
[IMAGE]
[IMAGE]
Licenciatura en Contadurma Pzblica
[IMAGE]
[IMAGE]
[IMAGE]
[IMAGE]!Proyecta tu futuro y mejora tu carrera!
[IMAGE]
[IMAGE]
Fotografma
[IMAGE]
[IMAGE]
[IMAGE]
[IMAG
* quartz [2011-11-26 07:00]:
> > i dunno what is so hard to understand about packet reordering based on
> > priority.
> >
> > prio queueing is best effort, no guarantees. with more effort (towards
> > low delay) for higher priorized traffic. no more, no less.
>
>
> Henning:
>
> my original ques
Se nco conseguir visualizar esta Newsletter por favor clique aqui
Bem-vindo(a) ` newsletter da Brinde&Companhia.
Conhega os nossos Guarda-Chuvas e USB Personalizadas.
Brinde-Companhia
Se recebeu por engano ou deseja deixar de receber as newsletters da
Brinde&Companhia por favor clique aqui.
Nco
On 11/26/11 13:20, Ville Valkonen wrote:
Hello,
I am running OpenBSD current on a Lenovo SL-510 laptop (dmesg below) and
xrandr rotate doesn't work as expected. When executing
$ xrandr --output LVDS --rotate right
picture goes completely gibberish, as seen in here:
http://imageshack.us/pho
Hello,
I am running OpenBSD current on a Lenovo SL-510 laptop (dmesg below) and
xrandr rotate doesn't work as expected. When executing
$ xrandr --output LVDS --rotate right
picture goes completely gibberish, as seen in here:
http://imageshack.us/photo/my-images/69/xrandr.jpg/
Currently I am u
Yupibar - N ON1N= N7 ON1N3N:O ONN5ON3N1OON-O OO ON?N3ON1ON/N1O,
N N5ON,OON1ON7, NN5N>N9N:N,, N%OO ON9ON;N?N9 ON1N9N=N9ON=,
NN?N3N9ONhttp://yupibar.blogspot.com
Download: http://yupibar.ourtoolbar.com
NNNNN)N#N$N ON7N=, OON?OO ON/N;N?OO ON1O, OON1 blogs ON1O
tyir
2011-11-26
[demime 1.01d removed an attachment of type image/jpeg which had a name of
=?utf-8?B?5Luj5byA5Y+R56WoLmpwZw==?=]
21 matches
Mail list logo
