> i hesitate to try until UEFI installation is matured
:-)
that's the problem everyone is in. It takes fortitude to make things
work.
Hello !
This post worked perfect for me (Shuttle UEFI only machine with a 64 GB SanDisk
Extreme USB 3 stick).
BUT as written there, use [OpenBSD] in disklabel instead whole disc.
I had the problem, that fdisk reports, that the used device was not there even
console log shows, that it was there.
that PC is a note book.
fortunately i remove battern for 30 minites .
and power on , windows 10 comes up .
bios is not damaged .
now PC is 64bit not 32bit , UEFI is important .
case reports contribute UEFI of openbsd .
Hi,
I observe strange behavior with Supermicro X8SIL-F. Latest BIOS and IPMI
firmware.
Only one FAN is present (CPU FAN).
After some time of normal work IPMI start to report errors with one (or
more) fans (low speed or not present).
'systat sensors' shows wrong or missing data for same fan.
I
Arrived in Australia, along with t–shirts. Saved me some washing before
work tomorrow :)
> On 8 Oct 2015, at 01:51, M Wheeler <6f84c...@refn.co.uk> wrote:
>
> CD's arrived today UK. Thanks again.
Hi,
Say I have a dump file of some level (>0) and I want to know the size of
files in it, how can I do that? It seems that the ls of restore -i can
only gives me inode numbers.
--
Manuel Giraud
And in Canada as well. (-:
On 13 October 2015 at 09:44, wrote:
> Arrived in Australia, along with tâshirts. Saved me some washing before
> work tomorrow :)
>
> > On 8 Oct 2015, at 01:51, M Wheeler <6f84c...@refn.co.uk> wrote:
> >
> > CD's arrived today UK. Thanks again.
Atanas Vladimirov bsdbg.net> writes:
> I observe strange behavior with Supermicro X8SIL-F. Latest BIOS and IPMI
> firmware.
> Only one FAN is present (CPU FAN).
> After some time of normal work IPMI start to report errors with one (or
> more) fans (low speed or not present).
> 'systat sensors'
Op Thu, 08 Oct 2015 11:06:45 +0200 schreef Markus Rosjat :
Hi there,
I have a spamd running in greylisting mode and maintain my own blacklist
that I update manually. So far so good yesterday I just did a quite
radical adding to my blacklist :) and I noticed my outgoing traffic
jumped from around
Arrived in Turkey, thank you all... :)
13 Ekim 2015 Salı tarihinde, Luciano Rottava da Silva
yazdı:
> And in Canada as well. (-:
>
> On 13 October 2015 at 09:44, >
> wrote:
>
> > Arrived in Australia, along with tâshirts. Saved me some washing
before
> > work tomorrow :)
> >
> > > On 8 Oct
Just upgraded my urrent/amd64 to the latest snapshot.
After the reboot, things fail with
kvm_mkdb(2849): syscall 16
smtpd(20483): syscall 27
smtpctl(12118): syscall 5
Is this the new tame(2) thing?
How can I help debug it?
Jan
OpenBSD 5.8-current (GENERIC.MP) #
On 10/13/15 16:00, Boudewijn Dijkstra wrote:
Op Thu, 08 Oct 2015 11:06:45 +0200 schreef Markus Rosjat :
Hi there,
I have a spamd running in greylisting mode and maintain my own blacklist
that I update manually. So far so good yesterday I just did a quite
radical adding to my blacklist :) and I
i might manage to sucseed to boot openbsd by UEFI .
this try is using USB stick.
1) on LINUX
on linux's fdisk
fdisk -l /dev/sdb
Device Boot Start End Sectors Size Id Type
/dev/sdb1 2048 1050623 1048576 512M b W95 FAT32
/dev/sdb4 1050624 3915775 2865152 1.4G a6 OpenB
sorry mustake .
cp /mnt/usr/mdec/BOOT* /mnt2/efi/boot
---
now state
ls -l ./EFI/BOOT/
total 280
-r-xr-xr-x 1 root root 110592 10æ 13 17:57 bootia32.efi
-rwxr-xr-x 1 root root 120832 10æ 13 17:57 bootx64.efi
drwxr-xr-x 2 root root 8192
On 2015-10-13, Boudewijn Dijkstra wrote:
> Op Thu, 08 Oct 2015 11:06:45 +0200 schreef Markus Rosjat :
>> Hi there,
>>
>> I have a spamd running in greylisting mode and maintain my own blacklist
>> that I update manually. So far so good yesterday I just did a quite
>> radical adding to my blacklist
Hello,
i wonder if i am doing it correctly.
i have two bgp router connection that will go on a firewall.
how am i expected to configure everything to enable failover with load
balancing?
(ascii art time)
[BGP1] [BGP2]
| |
|e1 |e2
---
Close to resolution ?
i have repeated experiment again .
the result is
ls -l EFI/BOOT
-r-xr-xr-x 1 root root 110592 10æ 13 17:57 bootia32.efi <--
-rwxr-xr-x 1 root root 120832 10æ 13 17:57 bootx64.efi
namely information from netbsd is needless .
so [refind-bin-0.8.3.zip download] is n
> 2)boot PC by openbsd CD op install58(amd64 snapshots)
> install openbsd by ordinal procedure .
Why you don't use OpenBSD's fdisk if you can boot from a CD ? I ask
because you don't wrote this or, I missed it.
> what about this ?
> there may be some imcopleteness , then help me.
Does it work f
thanks for reply .
> Why you don't use OpenBSD's fdisk if you can boot from a CD ? I ask
> because you don't wrote this or, I missed it.
1st ) efi area should be formated fat32 .
in linux
mkfs mkfs.ext3 mkfs.hfs mkfs.msdos mkfs.xfs
mkfs.bfs mkfs.ext4 mkfs.hfsplus mk
On 2015å¹´10æ14æ¥ 07:29, fuji wrote:
>
> thanks for reply .
>> Why you don't use OpenBSD's fdisk if you can boot from a CD ? I ask
>> because you don't wrote this or, I missed it.
>
> 1st ) efi area should be formated fat32 .
>
> in linux
> mkfs mkfs.ext3 mkfs.hfs mkfs.msdos
> thanks for reply .
No problem. I try it but, I also know only parts of it.
> 1st ) efi area should be formated fat32 .
Yes, the newfs_msdos does this. This part I don't know because, the man
page say's nothing about the default format - I know, you can specify it
using -F. I think, it is a FAT
thanks for great knowledge .
|I don't understand how you mean the 2 GB. But fdisk creates partitions -
|in this case the EFI and the OpenBSD. Check
my experimental USB is only 2GB.
that is
dmesg | grep sdb
[ 1268.887376] sd 3:0:0:0: [sdb] 3915776 512-byte logical blocks: (2.00 GB/1.86
GiB)
On Wed, 07 Oct 2015 14:51:28 +, M Wheeler wrote:
> CD's arrived today UK. Thanks again.
Just arrived just north of Chicago, IL USA (pre-ordered Sept 15) Many
thanks!
> thanks for great knowledge .
;-)
> |I don't understand how you mean the 2 GB. But fdisk creates partitions -
> |in this case the EFI and the OpenBSD. Check
>
> my experimental USB is only 2GB.
>
> that is
> dmesg | grep sdb
> [ 1268.887376] sd 3:0:0:0: [sdb] 3915776 512-byte logical blocks: (
i add photos in convinience .
see
http://openbsd-akita.blogspot.jp/2015/10/openbsd-uefi.html
Just reporting some problems with lastest build (#1477). The first thing
I have noticed is the xenocara start. The command 'startx' generally works
normally, but when starting with 'startx & lock -np' it fail.
Other strange behavior is chmod. Even when given a command to change
permissions to rea
On 2015-10-13 Tue 18:55 PM |, Stuart Henderson wrote:
>
> It's totally possible. Blacklist mode by default returns a temporary failure
> so a standard MTA would keep trying, whereas with greylisting or no spamd
> it would stop after the mail is accepted. And in stuttering mode you send
> one chara
27 matches
Mail list logo