On Sat, Oct 01, 2005 at 11:34:00PM +0100, ed wrote:
Is OpenBSD doing anything at the linux conference and expo this week at
the London Olympia?
http://www.openbsd.org/events.html
Hello,
I have a problem with OpenBSD 3.7 (GENERIC) on my laptop, Acer TravelMate
243LC, and WLAN with WEP. Since my laptop doesn't have a built in WLAN card, I
bought a Linksys WPC111v3 which, according to
http://www.openbsd.org/i386.html#hardware, is supported.
Connecting to an open and
On Sun, Oct 02, 2005 at 09:01:19AM +0200, Nikolaus Hiebaum wrote:
ifconfig wi0 192.168.200.2 255.255.255.0 nwid scyld nwkey BACE8A21EA
According to the ifconfig man page, The key can either be a string, a series
of hexadecimal digits (preceded by `0x'), or a set of keys... So I would try
that.
On Sunday 02 October 2005 00:08, ed wrote:
On Sat, 1 Oct 2005 12:27:56 -0600 (MDT)
Diana Eichert [EMAIL PROTECTED] wrote:
So Dweeb, what you recommend is upping the state table so we can
increase the amount of crap that's leaking out from the Windows
system? Brilliant, next time there's
On Sat, 1 Oct 2005 18:19:17 -0500 (CDT)
C. Bensend [EMAIL PROTECTED] wrote:
I am at a loss for a good web interface.
Anyone care to make any recommendations?
I'm a pretty big fan of SquirrelMail. It's a web-based IMAP client,
so you'd need an IMAP server as well (I use Courier). It
You have been successfully removed and will not receive any more messages.
On 10/2/05, Marc Balmer [EMAIL PROTECTED] wrote:
Bachman Kharazmi wrote:
When I try to boot a Geode GX1 with generic kernel it freeze here:
OpenBSD/i386 PXEBOOT 1.02
booting tftp:/bsd 4807268- (and here it freeze)
I've tried bsd.rd both from the 3.7 and 3.8 dir without any luck, am
Running firefox from the shell gives me this:
$ firefox
INTERNAL ERROR on Browser End: Exec of java_vm failed: 2
System error?:: No such file or directory
Gdk-ERROR **: Fatal IO error 9 (Bad file descriptor) on X server :0.0.
INTERNAL ERROR on Browser End: Could not read ack from child process
On 10/2/05, Marc Balmer [EMAIL PROTECTED] wrote:
Bachman Kharazmi wrote:
On 10/2/05, Marc Balmer [EMAIL PROTECTED] wrote:
Bachman Kharazmi wrote:
When I try to boot a Geode GX1 with generic kernel it freeze here:
OpenBSD/i386 PXEBOOT 1.02
booting tftp:/bsd 4807268- (and here it
OpenBSD Admin [EMAIL PROTECTED] writes:
I went and bought a netgear WG311 PCI 54g (Wg311GE) card the other
day to put in my firewall. I intended to use this is as an access
point for a WLAN. This card is listed in the support hardware section
on the openbsd website under i386 but not amd64.
On 10/2/05, Marc Balmer [EMAIL PROTECTED] wrote:
Bachman Kharazmi wrote:
I tried a linux kernel and it did boot the kernel at least.
I might be missing something for the Geode GX1 in my GENERIC kernel?
geode gx1 is the geode sc-1100 right? I use such a computer here
with the GENERIC
On Sun, Oct 02, 2005 at 04:02:25PM +0200, Peter N. M. Hansteen wrote:
Texas Instruments ACX111 rev 0x00 at pci0 dev 12 function 0 not
configured
it looks like netgear changed chipsets without telling anybody about it.
I had a similar experience with a of D-Link card. D-Link have several
you could try horde - it's pretty full-featured. Mta, i would
recommend qmail, but YMMV... The setup will be pretty tedious if u go
this way, but once setup, everything will run very nicely.
-jf
Thanks for your response,
I red the tty(4) manpage, and a part of the tip(1) manpage
Now I know the difference between tty and cua devices.
I changed the configuration to tell open3600 to use /dev/cua00 instead
of /dev/tty00.
Unfortunately, the problem is still the same.
Marc MAURICE
man
Reyk Floeter [EMAIL PROTECTED] writes:
what a mess!
My sentiments exactly. I wasn't particularly happy when I found out,
but then the the guys at the store let me hand the card back for a
refund with no problems.
d-link uses additional H/W revision numbers (like A1, B2, ...) to
inidicate
I get the following errors when trying to make clamav v0.87 from the
-stable ports tree:
server-th.o(.text+0x98a): In function `acceptloop_th':
: undefined reference to `cl_dup'
collect2: ld returned 1 exit status
*** Error code 1
Stop in
I get the following errors when trying to make clamav v0.87 from the
-stable ports tree:
You sure you're using -STABLE? I mean, are you absolutely sure that
your source tree is what you _think_ it is?
I built 0.87 on 3.7-STABLE just last night, flawlessly. I don't think
your checkout is what
On 10/01, Chris wrote:
Hello
I want to setup a OBSD box for my email server. It will service
probably about 2 dozen people, but It could conceivably double or more
over the next year or two.
I was wondering if anyone had any recommendations for an mta, and for a
webmail program that is
Hi misc,
I need help in Caracas, Venezuela.
We have a remote location, that doesn't have tech on stuff. They just lost
there Firewall. I guess it was some kind of power faulier.
We will have to reinstall the box. They will pay you for your help.
Please contact me off the list.
It's emergency.
On Sun, Oct 02, 2005 at 11:52:40AM -0500, the unit calling itself C. Bensend
wrote:
I get the following errors when trying to make clamav v0.87 from the
-stable ports tree:
You sure you're using -STABLE? I mean, are you absolutely sure that
your source tree is what you _think_ it is?
C. Bensend wrote:
I get the following errors when trying to make clamav v0.87 from the
-stable ports tree:
You sure you're using -STABLE? I mean, are you absolutely sure that
your source tree is what you _think_ it is?
I built 0.87 on 3.7-STABLE just last night, flawlessly. I don't think
On 10/1/05, Marc Espie [EMAIL PROTECTED] wrote:
Just wanted to know what people currently use for an usb printer under
OpenBSD. I'm looking for rather cheap hardware that's currently sold
in europe as brand new, and guaranteed to work (through experience)
by people...
Last year I bought a
Does anyone have any experience with asus wl-138g wlan pci card? I've
only found model 130g at supported hardware..
Jernej
These cards don't seem to be ath anymore.
The relevant bits from my dmesg.
rl0 at pci1 dev 0 function 0 D-Link Systems 530TX+ rev 0x10: irq 11 address
00:11:95:24:6a:0d
rlphy0 at rl0 phy 0: RTL internal phy
rl1 at pci1 dev 1 function 0 D-Link Systems 530TX+ rev 0x10: irq 5 address
--On 02 October 2005 20:38 +0200, Jernej Vodopivec wrote:
Does anyone have any experience with asus wl-138g wlan pci card? I've
only found model 130g at supported hardware..
Google: wl-138g chipset. First few hits say 'Marvell' - this is
undocumented/unsupported (but increasingly common).
eric wrote:
[ Note: I don't like doing this. I would rather use a snapshot and ]
[ just get -current, but I have the Adaptec bullshit on this machine ]
[ and need a kernel that support aac(4). ]
I'm going from 3.6 to 3.7, and just trying to get the fscking
Hi pirge and thanks!
pirge wrote:
set ulimit before running firefox:
$ ulimit -d 262144
$ firefox
Works!
On Sun, Oct 02, 2005 at 11:35:48AM -0500, J Moore wrote:
I get the following errors when trying to make clamav v0.87 from the
-stable ports tree:
server-th.o(.text+0x98a): In function `acceptloop_th':
: undefined reference to `cl_dup'
collect2: ld returned 1 exit status
*** Error code 1
I saw this once, when trying to create an updated port, and now it happened
again, as I'm trying to get a newer version of snownews. I am trying to
modify the existing port to work with newer version, I modified also patches
that are in the tree, I hope correctly, but what happens is when I
On Sun, Oct 02, 2005 at 06:28:53PM -0400, the unit calling itself MH wrote:
I get the following errors when trying to make clamav v0.87 from the
-stable ports tree:
server-th.o(.text+0x98a): In function `acceptloop_th':
: undefined reference to `cl_dup'
collect2: ld returned 1 exit
Quoth [EMAIL PROTECTED]
These cards don't seem to be ath anymore.
The relevant bits from my dmesg.
rl0 at pci1 dev 0 function 0 D-Link Systems
530TX+ rev 0x10: irq 11 address 00:11:95:24:6a:0d
rlphy0 at rl0 phy 0: RTL internal phy
rl1 at pci1 dev 1 function 0 D-Link Systems
530TX+ rev 0x10: irq
Hi,
I am wondering if there is a good way to check if a flag-day has passed if you
have both the new and old kernel. How can I check that?
# Han
On Mon, Oct 03, 2005 at 12:44:26AM +0200, viq wrote:
I saw this once, when trying to create an updated port, and now it happened
again, as I'm trying to get a newer version of snownews. I am trying to
modify the existing port to work with newer version, I modified also patches
that are in
Hi,
I just had a my system hang while rebooting for the second time.
When I looked in the console I saw the last kernelmessage was:
`syncing disks...'
After pressing alt-ctrl-esc and typing `boot reboot' I got the
system to reboot.
How should I proceed from here? Is this a sign the HD is
I would have thought the Makefile would have taken care of this; i.e.
deleted (or mv'd) the clamav libs... was I expecting too much, or is
something missing from the port?
I would recommend pkg_delete'ing the prior version, and then
installing the new one. That's what I do, and I don't end up
On Sun, Oct 02, 2005 at 09:08:02PM -0500, the unit calling itself C. Bensend
wrote:
I would have thought the Makefile would have taken care of this; i.e.
deleted (or mv'd) the clamav libs... was I expecting too much, or is
something missing from the port?
I would recommend pkg_delete'ing
Yeah - I would've expected problems at the 'make install' step, but
thought 'make' would've gone OK??
No, because linking is done in the 'make' step. It was
finding the old libs during that step, and crapping out.
Benny
--
Now, that next spring you find in your garage a creature that
looks
I finally got in-kernel PPPoE to work after fixing the
hostname.pppoe0 file up a bit.
Now I'm new to this so I have a few questions. I can get the OpenBSD
box to access the internet fine, but am a bit confused about getting
the rest of the network connected to the net. I have multiple
On Sat, Oct 01, 2005 at 08:50:13AM -0500, Travis H. wrote:
Yeah, I neglected stateful matching. I should have said that every
packet that has to run the gauntlet of rules, has to run all of them.
Subsequent reading of the PF FAQ confirms that there's no deep
evaluation-reordering magic
I have been through the FAQS and manuals trying to configure load
balancing on my 4 DSL connections. The connections are all same from the
same ISP, each connection terminates into a ADSL router, which gets the
IP from the ISP server, the ADSL routers have the following internal
addresses
1.
On Sat, Oct 01, 2005 at 04:43:40AM -0500, Travis H. wrote:
Ah, but the matching engine doesn't have to traverse the whole rule
list that way. Unless pf is doing something really tricky, every
packet will have to traverse every firewall rule without use of
quicks. On a complicated, busy
41 matches
Mail list logo