Matthew Caron wrote:
>
> > 64Bit PCI devices are hard to find. I don't have a other device. I can't
> > test it, sorry.
> Oh, I'm not asking you to test anything like that - I was just telling
> you for future reference. We've already done that at work.
I'll remember that. But it would be interres
Slot 4 sounds to have some optional possibility of luck. Could you try
disabling ACPI in your BIOS?
Tried it; no difference.
--
Writing a network stack from scratch is quite fun.
~~ Matt Caron ~~
---
This SF.Net email sponsored by: Free pre-bui
Hey Matthew,
On Sun, 2003-08-17 at 20:10, Matthew Caron wrote:
> Starting from slot 3 (top PCI slot
> Sound card is in slot 5 (one from bottom)
> 3 - as described before - lots of dropped frames at -d 4, nothing at
> -d 2
> 4 - Better - got 2 frames at -d 2 before it stopped!
> 5 - Worse - -
I know. It's very strange.
I will try it in another slot.
I tried it in all other slots, with varying degrees of success.
Starting from slot 3 (top PCI slot
Sound card is in slot 5 (one from bottom)
3 - as described before - lots of dropped frames at -d 4, nothing at
-d 2
4 - Better - got
64Bit PCI devices are hard to find. I don't have a other device. I can't
test it, sorry.
Oh, I'm not asking you to test anything like that - I was just telling
you for future reference. We've already done that at work.
I've taken a look at that datasheet. I guess you reffer to the topic:
Southbri
Hallo
> > My MPX board only has a 10/100 3Com 905C Ethernet Adapter. And I use the
> > 64Bit version of the Adaptec SCIS Controller. I have not noticed any
> > problems because of that (or at least I think so)
> The 10/100 controller is slaved to the 32bit/33Mhz bus. So, you only
Right.
> have on
For some strange reason the on my TYAN MPX Baord the SB-Life always has
own interrupt. While the BUZ always shares it's interrupt with the 3Com
905 and es1371 devices.
I've found that it depends on the slot you put it in. Counting from top
PCI slot, I've got the Buz in slot 3 (first 32/33 slot),
Hallo
> > Well, I guess the card cannot keep up then. CVS has some PCI
> > optimizations for the Buz, as does 0.9.4. If it doesn't work with them,
> > it unfortunately won't work at all, I'm affraid.
> Fair enough.
For some strange reason the on my TYAN MPX Baord the SB-Life always has
own interru
My MPX board only has a 10/100 3Com 905C Ethernet Adapter. And I use the
64Bit version of the Adaptec SCIS Controller. I have not noticed any
problems because of that (or at least I think so)
The 10/100 controller is slaved to the 32bit/33Mhz bus. So, you only
have one thing on the 64/66, which,
Hallo
> >>> The AMD chipset was not known to have any issues until now.
> > Usually the AMD chipsets work quite reliabel.
>
> I've discovered 2 issues with the 760MPX
>
> 1.) Depending on how nice your devices play on the 64bit/66MHz PCI bus,
> you may or may not be able to put more than on
Well, I guess the card cannot keep up then. CVS has some PCI
optimizations for the Buz, as does 0.9.4. If it doesn't work with them,
it unfortunately won't work at all, I'm affraid.
Fair enough.
Face it: the Buz is picky. :-(.
Which is why it was discontinued, from what I gather.
I don't know how
Hey Matthew,
On Sat, 2003-08-16 at 18:39, Matthew Caron wrote:
> No, I didn't. No one told me to :-) However, the same thing happens. At
> -d 4, lavrec only drops approx 500 frames/sec (as opposed to the 1000 it
> was doing before) and at -d 2 it does exactly what it did before.
Well, I guess t
No, I didn't. No one told me to :-) However, the same thing happens. At
-d 4, lavrec only drops approx 500 frames/sec (as opposed to the 1000 it
was doing before) and at -d 2 it does exactly what it did before.
Ronald Bultje wrote:
Hi Matthew,
On Sat, 2003-08-16 at 16:50, Matthew Caron wrote:
Hi Matthew,
On Sat, 2003-08-16 at 16:50, Matthew Caron wrote:
> current CVS of driver-zoran just fails to load. Unresolved symbols.
Do you use the correct branch (ZORAN_VIDEODEV_2)?
Ronald
--
Ronald Bultje <[EMAIL PROTECTED]>
---
This SF.N
Hallo
I was offline for about one day.
> >Bernhard Praschinger (<[EMAIL PROTECTED]>) has a Tyan 2466-4M
> > with two MP-2400 (if memory serves me correctly) cpus and TWO
> > mjpeg capture cards plus two sound cards. The last I heard it
> > was working very well.
> The
Hallo
I was offline for about one day.
It's okay. I appreciate the response.
The AMD chipset was not known to have any issues until now.
Usually the AMD chipsets work quite reliabel.
I've discovered 2 issues with the 760MPX
1.) Depending on how nice your devices play on the 64bit/66MHz PC
I've made progress with this enough that I can capture a few minutes of
video with Lavrec. I'm still dropping frames all over and it dies after
a few minutes, but I remember seeing a whole bunch of stuff about this
in the archives, so I will go look there.
Thanks for the help, folks.
Matthew C
Bernhard Praschinger (<[EMAIL PROTECTED]>) has a Tyan 2466-4M
with two MP-2400 (if memory serves me correctly) cpus and TWO
mjpeg capture cards plus two sound cards. The last I heard it
was working very well.
Then I wonder if it's just that the Buz is flaky (which
On Fri, 15 Aug 2003, Matthew Caron wrote:
> (Disclaimer - I am new to this list. If this should be on developers,
> yell at me and I will take it there)
Perfectly on topic for this forum.
> There seems to be lots of discussion about Via vs. Intel vs. SIS, but no
> one mentions AMD. Ha
(Disclaimer - I am new to this list. If this should be on developers,
yell at me and I will take it there)
There seems to be lots of discussion about Via vs. Intel vs. SIS, but no
one mentions AMD. Has anyone tried/gotten any of the Zoran cards to work
with an AMD chipset board? Specifically, I
20 matches
Mail list logo