Harri,
Thats why I use on my Openfietsmap not routable lines for highways with
bicycle=no.
I misuse the avoidance of toll roads to force the routing to take cycle routes
only.
In my scripts I retag all highways that are not part of a cycle route relation
with toll=yes,
and all cycle routes with
Hi Jan,
I also get the same route as test-route-b_yes-removed.jpg with the latest OFM
Germany from 10=05-2022
(website is finally up to date since today).
It only takes the Altengabengäßchen when you move the via point closer to the
junction Altengabengäßchen,
or when you select "avoid toll
the param list:
boundary=* & ... & is_in(boundary, '*', ...
Ticker
On Wed, 2022-04-06 at 13:02 +, lig fietser wrote:
> I also want to use it for all boundaries but this line is not
> working:
> boundary=* & mkgmap:area2poi=true & is_in(boundary,
using the
is_in() function, something like:
tag=value & mkgmap:area2poi=true & is_in(tag, value, in_or_on)=true
[0x...]
Ticker
On Wed, 2022-04-06 at 07:46 +, lig fietser wrote:
> Hi,
> I've noticed on my map that mkgmap places the poi of an area like
> the "Nationalpark
Ok, thanks.
Haven't tried the is_in function, I think the role=label works if there is a
node in the OSM data but in this case there isn't any (and I won't want to add
that because that could be seen as tagging for the renderer.
___
mkgmap-dev mailing
Hi,
I've noticed on my map that mkgmap places the poi of an area like the
"Nationalpark Niedersächsisches Wattenmeer"
(https://www.openstreetmap.org/relation/157811) outside of the National Park,
so not in the sea but on the mainland near Wittmund. I prefer to place those
pois inside such
] elevation in bridges and tunnels
Hi Minko,
there is no special flag for tunnel/bridge in the IMG format, at least we don't
know any. So, Garmin software cannot detect the special case.
Gerd
Von: mkgmap-dev im Auftrag von lig
fietser
Gesendet: Donnerstag, 20
von lig
fietser
Gesendet: Donnerstag, 20. Januar 2022 09:20
An: Development list for mkgmap
Betreff: Re: [mkgmap-dev] elevation in bridges and tunnels
I've put an example on this forum (in Dutch). The brouter route
(https://tinyurl.com/3nt27szy) shows a profile that is more accurate than
I've put an example on this forum (in Dutch). The brouter route
(https://tinyurl.com/3nt27szy) shows a profile that is more accurate than the
route in Basecamp.
https://forum.wereldfietser.nl/viewtopic.php?f=3=30684=412494#p412494
Van: mkgmap-dev namens lig
Hi guys,
I came across this video on youtube, where ridewithgps.com improved their
elevation profiles by ignoring the underlying altititude data of tunnel and
bridges:
https://youtu.be/wd-wT3EeayI
I found out that other route planners like brouter, cycle.travel and Osmand
also ignores the
. Maybe I never sent it...
Is it difficult to extract the last line? I think on Linux the tool tail should
help with that.
Gerd
Von: mkgmap-dev im Auftrag von lig
fietser
Gesendet: Samstag, 14. August 2021 13:15
An: Development list for mkgmap
Betreff
Hi,
If I run the command java -jar mkgmap.jar --version
it will print a double version in the output, like this
Map created with Mkgmap version 4805
4805
I've used a quite outdated mkgmap version (mkgmap-r4285) whose only output was:
4285
How can I get rid of the double 4805 4805?
Thanks for the explanation and the fix Gerd!
Hi Minko,
well, yes, the problem is caused by an extreme density of (Garmin) route
restrictions. Those are created for OSM turn restrictions and also for barriers
when --link-pois-to-ways is used. Maybe this area
.pbf
Gerd
Von: mkgmap-dev im Auftrag von lig
fietser
Gesendet: Samstag, 7. August 2021 17:24
An: Development list for mkgmap
Betreff: Re: [mkgmap-dev] Bad tile around East London / Greenwich
Hi,
I've tried it too with my OFM full style and mkgmap v 4802 but
Hi,
I've tried it too with my OFM full style and mkgmap v 4802 but it doesn't show
any issues at all.
Maybe some parameters are different? I don't use:
pois-to-areas-placement
poi-excl-index
nearby-poi-rules
___
mkgmap-dev mailing list
Please have a look at this topic, seems barriers are not respected in the
default style?
https://forum.openstreetmap.org/viewtopic.php?id=67405
___
mkgmap-dev mailing list
mkgmap-dev@lists.mkgmap.org.uk
Yep, I recognize this.
Maybe it had something to do with mutiple routable lines on top of each other
at roundabouts. Some devices don't like this and crash. I had to adapt my
style, removed the routable line 0x02 (cycling route) on top of the roundabouts
and the issue was solved. However, there
Von: mkgmap-dev im Auftrag von lig
fietser
Gesendet: Dienstag, 9. April 2019 14:03
An: mkgmap-dev
Betreff: [mkgmap-dev] mkgmap:line2poitype
Hi,
I'm trying to exclude pois of ways that are connected to each other like this:
s1--way1--e1 s2--way2--e2
With s1=start node of way1
Hi,
I'm trying to exclude pois of ways that are connected to each other like this:
s1--way1--e1 s2--way2--e2
With s1=start node of way1 and e1 = end node
s2 is the same node as e1.
In the points file I like to render only points s1 and e2 but not e1 / s2
I have tried these two rules but they
Thanks Gerd, looking forward to it.
___
mkgmap-dev mailing list
mkgmap-dev@lists.mkgmap.org.uk
http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
Hi,
I'd like to add specific pois for restricted access on bridges and tunnels with
mkgmap:line2poitype, but not all bridges are as important, only the longer ones.
This is working:
mkgmap:line2poitype=start & (bridge=* | tunnel=*) & (bicycle:conditional=* |
access:conditional=* |
Yes, maybe is a different poi for amnity=shelter a better alternative.
Now it has the same poi as campsite. In the generic new and openfietsmaps I use
an icon with a hut and raindrops, like in the osm carto style sheets.
Van: mkgmap-dev namens Gerd Petermann
On the forum "Arie" reports the following issue:
"Using the tag amenity: shelter, shelter_type: public_transport displays a TENT
symbol on the map downloaded in free worldwide Garmin maps.
When you look at it on the openstreetmap.org map it shows a shelter symbol.
Is it possible to use another
Hi,
I updated my Benelux maps last night succesfully, so I think the Osmconvert
windows 64 bit version for large file support seems to fix my issue:
https://wiki.openstreetmap.org/wiki/Osmconvert#Windows
Thanks Gerd for your help!
___
mkgmap-dev
No, didn't know that. But the user and changeset ID's are not relevant for my
styles anyway.
just to make sure: You are aware that Geofabrik has two different types of
downloads now?
See the green box at the top of http://download.geofabrik.de/
Gerd
know for sure, I often have
seen it works sometimes, but sometimes not, depending on the time of the day,
at night it often fails).
<https://yadi.sk/d/Vnwc4kut3LCBFm>
Van: mkgmap-dev namens lig fietser
Verzonden: donderdag 20 december 2018 05:55
Aan
Thanks Gerd,
I've got them. Lets see if it works.
I contacted Markus Weber about this but he has no Windows system and seems
unable to build corrected versions :-(
I've attached the fresh binaries, not sure if they'll pass a virus checker.
Gerd
Thanks Gerd, I'll give it a try.
Does this mean that osmfilter and osmupdate have the same issues?
___
mkgmap-dev mailing list
mkgmap-dev@lists.mkgmap.org.uk
http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
Hi Gerd,
I am using the osmconvert 32 bit version on a Windows 7/64 bits pc.
How do I build another version with large file support?
Van: Gerd Petermann
Verzonden: donderdag 20 december 2018 05:08
Aan: lig fietser; Development list for mkgmap
Onderwerp: AW
Hi,
Recently I have a lot of issues updating my OSM data.
Normally my workflow is updating a region (Benelux) with osmupdate.
Recently I have found out the updates are corrupt, all mp relations are not in
the map anymore.
Today I tried to download a Europe extract from Geofabrik, I cut out the
I see there is no distinction between a pedestrian highway and a footway/path
yet.
On the generic new map I use 0x11 for pedestrian highways and 0x10 for
cycleways, but you can do the opposite.
Both are routable lines and visible on most (?) devices. Also for steps I use
another routable line
On the forum someone asked if highway=services could be added to the polygons
style.
https://forum.openstreetmap.org/viewtopic.php?pid=728618#p728618
For example like in the generic new maps:
landuse=retail | highway=services [0x08 resolution 22-20]
If added, prevent that it also will be mopped
Yes, what Arndt writes is correct, for most pois Basecamp decides when it shows
up. But there are some pois that Basecamp does not control, so you can use
mkgmap to set those levels. I don't have a list of which pois are controlled by
Basecamp, it is always a matter of trial and error.
About levels, you can specify resolution or level in your style files
For example tourism=hotel [0x2b01 resolution 24]
24 means that a hotel appears only in the highest zoom level
If you specify 20 it appears from zoom 20 or higher.
If you specify 20-22 it appears only in that range, so not on
Here is another source but not up to date
http://develop.freizeitkarte-osm.de/boundaries/
manfred.haiduk wrote:
So we are looking for a second source of sea.zip and bounds.zip.
___
mkgmap-dev mailing list
mkgmap-dev@lists.mkgmap.org.uk
The owner is Lambertus, you can mail him at
osm at na1400 dot info
___
mkgmap-dev mailing list
mkgmap-dev@lists.mkgmap.org.uk
http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
:-(
Gerd
Von: mkgmap-dev im Auftrag von lig
fietser
Gesendet: Freitag, 28. September 2018 09:26
An: osm@pinns; Development list for mkgmap
Betreff: Re: [mkgmap-dev] Beaches as a polygon
What did you expect? Of course a typ file is needed to make that map look
0x53 :(
On 27/09/2018 09:48, osm@pinns wrote:
Hi Minko
Yes, 0x53 sounds good ; I have 53 down as 'flat , mud "
r
Nick
On 27/09/2018 09:05, lig fietser wrote:
Hi Nick,
Remarkable that this have not been noticed already!
I would suggest polygon type 0x53, typ viewer shows this as is the n
Hi Nick,
Remarkable that this have not been noticed already!
I would suggest polygon type 0x53, typ viewer shows this as is the non NT
version of 0x10C06 (if that matters). And please add natural=sand.
Suggestion:
natural=beach | natural=sand [0x53 resolution 20]
Hi,
I can reproduce your findings with the default style. With the generic new or
my Openfietsmap style it renders fine so it seems style dependend.
I found out the tourism=yes tag from the multipoly relation is the cause. Once
removed, it renders. Can this be fixed in mkgmap (natural before
On the osm forum someone mentioned natural=cape is not listed as feature.
Could be added in the points file:
natural=cape [0x6606 resolution 24]
___
mkgmap-dev mailing list
mkgmap-dev@lists.mkgmap.org.uk
: daily changefile 2079: 2018-05-23T00:00:00Z
osmupdate: Merging changefiles.
osmupdate: Creating output file.
osmupdate: Deleting temporary files.
osmupdate: Completed successfully.
Van: mkgmap-dev <mkgmap-dev-boun...@lists.mkgmap.org.uk> namens lig fietser
&l
ing download
problems is to download the file manual by wget and see the error message. I
guess in your case the first file (state.txt of daily, hourly or minutely) is
failing. So osmupdate can't read which is the latest version of the diffs.
Henning
On 24.05.2018 23:32, lig fietser wrote:
N
Not sure what you mean with wget Henning. I use osmupdate old.o5m new.o5m, not
wget and I dont download the whole planet.
Maybe you try to download the state. txt manually by wget to get more feedback
on the cause.
Henning
because some OpenStreetMap contributors live in the European Union.
Extracts with full
metadata<https://osm-internal.download.geofabrik.de/index.html> are available
to OpenStreetMap contributors only.
Am 24.05.2018 um 11:00 schrieb lig fietser:
Thanks Henning, I updated wget but it still does not wor
ap
Onderwerp: Re: [mkgmap-dev] osmupdate
You need to update wget to latest version as diffs are only served by https and
older wget can't use local certificate store. Met the same problem recently...
Henning
Sent from BlueMail<http://www.bluemail.me/r?b=13037>
On 24 May 2018, at 14:01, lig
Since recently I cannot update my osm maps anymore with osmupdate.
Error: Could not get the newest daily timestamp from the Internet.
Anyone familiar with this isssue and how to fix this?
___
mkgmap-dev mailing list
mkgmap-dev@lists.mkgmap.org.uk
Thanks for noticing me Gerd.
>From which version it didnt work? My latest maps I've compiled with
mkgmap-r4136
Van: mkgmap-dev namens Gerd Petermann
Verzonden: zaterdag 14 april 2018
he detection for a good value has an unwanted side effect :-(
Will look at it later if Mike doesn't want to take over.
Gerd
Von: mkgmap-dev <mkgmap-dev-boun...@lists.mkgmap.org.uk> im Auftrag von lig
fietser <ligfiet...@hotmail.com>
Gesendet: Dienstag
gt; im Auftrag von lig
fietser <ligfiet...@hotmail.com>
Gesendet: Dienstag, 13. März 2018 11:19:52
An: Development list for mkgmap
Betreff: Re: [mkgmap-dev] contours not rendered anymore
Hi Gerd,
Good question. I have now turned off DEM compilation but it does not matter.
When I compile th
Hi,
Since recently one of my contour tiles of my Benelux map is not rendered
anymore. I am using mkgmap r-4127
In my workflow I use mkgmap.args -c contours\contours.args, the contours folder
you can download here:
http://mijndev.openstreetmap.nl/~ligfietser/mkgmap/
As you can see, I do not use
Thanks Gerd!
I see no crashes so far. Will test more, keep up the good work!
Van: mkgmap-dev namens Gerd Petermann
Verzonden: woensdag 14 februari 2018 06:44:54
Aan:
>> 2) it probably also depends on the boundaries (areas.list)
>>>>>
>>>>> I assume now that the tile boundary from areas.list should be a
>>>>> certain multiples of degrees,
>>>>> probably different multiples for lat and lon and tha
Hi Gerd,
I tested your patch but I still see frequent crashes near tile borders.
Van: mkgmap-dev namens Gerd Petermann
Verzonden: woensdag 7 februari 2018 02:45:27
Aan:
Hi Gerd,
Maybe you can have a look here: http://openmaps.eu/garmindownload
___
mkgmap-dev mailing list
mkgmap-dev@lists.mkgmap.org.uk
http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
orrow.
Gerd
Von: mkgmap-dev <mkgmap-dev-boun...@lists.mkgmap.org.uk> im Auftrag von lig
fietser <ligfiet...@hotmail.com>
Gesendet: Freitag, 2. Februar 2018 18:24
An: Development list for mkgmap
Betreff: Re: [mkgmap-dev] Commit r4101: pass
mit r4101: pass original bounding polygon to
HGTConverter
Hi Minko,
thanks for testing. Please see my new post
http://www.mkgmap.org.uk/pipermail/mkgmap-dev/2018q1/028006.html
Gerd
Von: mkgmap-dev <mkgmap-dev-boun...@lists.mkgmap.org.uk> im Auf
Hi Gerd,
I have tested r4101 with and without --dem-polygon, but in both maps I geto now
and then crashes in the altitude profile in mapsource. Not as often as in
previous mkgmap versions, but this issue is still present even without
--dem-polygon.
Van:
Thanks for noticing this, I'll change it in my styles
Van: mkgmap-dev namens Steve Ratcliffe
Verzonden: vrijdag 2 februari 2018 06:42:14
Aan: mkgmap-dev@lists.mkgmap.org.uk
Onderwerp: Re:
Sorry, I was wrong Gerd, it seems I didn't check routing over tile borders.
Altitude profiles crashes there too. Hope you can solve this bug.
Van: mkgmap-dev namens Gerd Petermann
Gerd, I use dem-polygon and most profiles turn out ok, but sometimes it crashes
yes.
Van: mkgmap-dev namens Gerd Petermann
Verzonden: donderdag 1 februari 2018 23:25:23
Aan:
Yes, it would be helpful if we mention where we can get the hgt files, a few
examples of the dem-dist values and an explanation how to calculate it. This
information is already there but mentioned in the many updates of the branch
versions.
I use http://www.javawa.nl/srtm/index.php?lang=nl
mkgmap-dev-boun...@lists.mkgmap.org.uk> im Auftrag von lig
fietser <ligfiet...@hotmail.com>
Gesendet: Mittwoch, 24. Januar 2018 11:30:05
An: Development list for mkgmap
Betreff: Re: [mkgmap-dev] bug in r-4025
Hi Gerd,
I have found out that the levels in the option file matters:
These settings are fine if I
Hi Gerd,
I have found out that the levels in the option file matters:
These settings are fine if I skip level 23:
levels = 0:24, 1:22, 2:20, 3:18
overview-levels = 4:17, 5:15, 6:14
These go wrong, the gmap file is not compiled:
levels = 0:24, 1:23, 2:22, 3:20, 4:18
overview-levels = 5:17,
BTW,
If i change it into
x-dem-dists: 9942,9942,9942,13248,44176
the rendering is just fine.
Van: mkgmap-dev <mkgmap-dev-boun...@lists.mkgmap.org.uk> namens lig fietser
<ligfiet...@hotmail.com>
Verzonden: woensdag 24 januari 2018 01:14:28
Aan
Hi Gerd
I used these options:
x-dem: G:\mkgmap\DEM
x-dem-dists: 3312,6628,9942,13248,44176
x-overview-dem-dist=88368
The strange thing is that the img is compiled without errors but not rendered.
This issue/bug is not happening in r-4066 so I guess it is "solved" but you
never know.
Hi Gerd,
Users of my Openfietsmap Germany reported a bug in my maps, one tile was
missing. Normally something went wrong with splitting (tiles too big) but this
one was compiled fine as img. However, it didn't render, only the overview map.
I have compiled it with r-4025. When I compile it
ared. Do you still
have the previous mkgmap.jar?
If yes, please try to find out and let us know the version.
Gerd
Von: mkgmap-dev <mkgmap-dev-boun...@lists.mkgmap.org.uk> im Auftrag von lig
fietser <ligfiet...@hotmail.com>
Gesendet: Samstag, 13.
Hi,
Today I uploaded my Benelux map but it shows some rendering issues when
zooming in and out. I have compiled it with r-4048
https://www.youtube.com/watch?v=x6FAYUkPdYw
The former versions didnt show this behaviour. I have also changed some dist
settings, maybe this can be the cause?
__
Von: mkgmap-dev <mkgmap-dev-boun...@lists.mkgmap.org.uk> im Auftrag von lig
fietser <ligfiet...@hotmail.com>
Gesendet: Donnerstag, 11. Januar 2018 10:52:29
An: Development list for mkgmap
Betreff: Re: [mkgmap-dev] option --show-profiles and DEM
--show-profiles=1
--show-profiles=1
Sets a flag in tdb file which enables profile calculation in MapSource
or
Basecamp based on contour lines.
No, if show-profiles = 1 and DEM data is present, the profile is calculated
from the DEM data and *not* from the contour lines
If DEM data (see "Hill
With this test map I can also see the difference in the altitude profiles with
and without DEM (based on 10m contour interval):
https://postimg.org/gallery/1huzv3m6m/
Please note that the higher accuracy of the DEM profile does not always reflect
the elevation in reality, the road beds are
Gerd, you can test it with this tile from the Bremen area.
it has contours (10m distance) but no DEM
http://mijndev.openstreetmap.nl/~ligfietser/mkgmap/49000225.o5m
___
mkgmap-dev mailing list
mkgmap-dev@lists.mkgmap.org.uk
I'm sorry Gerd but you are wrong.
When I have a map merged with contours but without DEM and without
show-porfiles=1 in my options args file the elevation profile is greyes out and
not available. Only if I use show-porfiles=1 an altitude profile is available
when making a route. So please keep
Thanks for the quick fix Gerd!
I have tested a few tiles, seems working as expected with r4035.
Hi Minko,
Since r4027 single zipped hgt files (*.hgt.zip) caused problems, mkgmap
remembered the wrong name and tried to find the file again and again (silentiy
and
I dont use logging Gerd.
And I saw this behaviour in 4028 and 4033.
Here are some of those o5m tiles, maybe they are too big too handle?
http://mijndev.openstreetmap.nl/~ligfietser/mkgmap/
Van: mkgmap-dev namens Gerd
BTW my DEM tiles for my Atlantic map are unzipped hgt's so that is not the
case...
Van: mkgmap-dev <mkgmap-dev-boun...@lists.mkgmap.org.uk> namens lig fietser
<ligfiet...@hotmail.com>
Verzonden: zaterdag 6 januari 2018 06:54:09
Aan: Development lis
hive ?
Gerd
Von: mkgmap-dev <mkgmap-dev-boun...@lists.mkgmap.org.uk> im Auftrag von lig
fietser <ligfiet...@hotmail.com>
Gesendet: Samstag, 6. Januar 2018 15:47:06
An: Development list for mkgmap
Betreff: Re: [mkgmap-dev] r4033: new dem options are now documented
Hi Gerd, I
Hi Gerd, I use -Xmx4000m
All tiles get stuck, doesnt matter which one.
I have tried one of the Benelux, Germany, Canary Islands.
I guess my splitter version is too old??
I have still r-321(2014!). Strange because mkgmap 4025 performed well.
Gerd, I don't know why but mkgmap >v4025 does not work for my maps anymore.
It is doing hours to compile one tile!
My (experimental) DEM settings are
dem-dists=3312,3312,3312,6628,9942
overview-dem-dist=16560
Map levels:
levels = 0:24, 1:23, 2:22, 3:20, 4:18
overview-levels = 5:17, 6:15, 7:14
essed.
Gerd
Von: mkgmap-dev <mkgmap-dev-boun...@lists.mkgmap.org.uk> im Auftrag von lig
fietser <ligfiet...@hotmail.com>
Gesendet: Donnerstag, 4. Januar 2018 09:36:09
An: mkgmap-dev@lists.mkgmap.org.uk
Betreff: Re: [mkgmap-dev] mkgmap r4025 implements --x-
Hi Gerd,
Is it possible to skip dem processing for some specific tiles, for instance I
have to add some contour tiles that needs to be processed each time with the
same mkgmap version (cannot add it as already processed img).
I add them as overlay map on my Benelux map with this statement in my
Thanks Gerd for implementing the poly option. It solves my issues with large
ocean tiles too, by drawing a polygon around the (azores) islands I can keep
the tiles big, the issues of memory errors are solved!
___
mkgmap-dev mailing list
;
Gesendet: Samstag, 23. Dezember 2017 12:04
An: lig fietser
Betreff: AW: [mkgmap-dev] r4015 in dem-tdb branch implements
--x-overview-dem-dist
I am not sure what to think about that.
When you use 3'' hgt files (size is ~2.8MB) the resolution in that data is
2^32/(360 * 1200) ~ 9942.
When you
Hi Gerd,
Thanks for the good work to implement DEM into mkgmap!
I have tested a few tiles, I noticed that BuildDEMFile with--dlon=0.00027761
has a much more detailed relief than the default values x-dem-dists=5520,
16560, 44176, 88368 How can I get the same results as with dlon=0.00027761?
You can store the gmap folders anywhere, and make a shortcut of this folder.
Put this shortcut in the default garmin folder(s) . Or use Javawa GMTK, this
tool will do that for you.
Van: mkgmap-dev namens Frank Stinner
Thanks guys, I can get around this bug with a simple workaround (replace all
turn-height_turnstile with turnstile), was just wondering what caused this
behaviour.
Van: mkgmap-dev namens Henning
Scholland
Hi,
I have added a few hacks on barriers to make more info rendering on my maps.
Therefore I misuse the housenumber option to make it visible, like barriers:
barrier=* & barrier ~
Ah I understand now what you've meant Nick.
Lowering my max-nodes from 1,800.000 to 300.000 nodes solved the problem,
thanks. Builddemfile couldnt handle the very huge tiles in the ocean , so by
lowering my max-nodes the map got more tiles and those big ocean tiles became
smaller, so
the desired dem effect using the canary
islands pbf
Using your files I noticed builddemfile creating lots of dem files,containing
mere dummyvalues.
I tend to avoid such files.
Just a thought : perhaps experiment with higher maxnodes?
Nick
On 09/12/2017 17:12, lig fietser wrote:
lig fietse
;mkgmap-dev-boun...@lists.mkgmap.org.uk> namens lig fietser
<ligfiet...@hotmail.com>
Verzonden: woensdag 6 december 2017 05:43:40
Aan: mkgmap-dev
Onderwerp: [mkgmap-dev] regular expression help needed
Hi,
I have noticed that this notation seems not to work anymore (I'm sure it worked
be
Hi,
I have noticed that this notation seems not to work anymore (I'm sure it worked
before):
barrier=* & barrier ~ '(lift_gate | toll_booth | border_control | swing_gate |
log)' [0x3201 resolution 23]
I have a lot like those lines in my style sheets and I dont know why pois like
Hi Frank,
Yes I meant new.tdb, I have changed a lot of file names and paths to check
where this error came from
It seems to work now! With the fixed tdb I can now send maps from the computer
to the GPS without errors. I'll check the maps further, will report it when I
find something.
Hi Frank,
I get an error message "unbekanntes Argument: 1001.tdb"
with
gmtool -i "g:\mkgmap\Openfietsmap\versions\test\Openfietsmap
(BNL).gmap\Product1\1001.tdb" -i . --withsubdirs
--mapsource=new.tdb;noov;notyp;nomdx;nomdr;noinst --hasdem=1 -o
g:\mkgmap\Openfietsmap\versions\test\
My maps also have multiple labels and the same issues. To me it looks like
Garmin is rendering the order totally random, I cant control it either.
Van: mkgmap-dev namens Gerd Petermann
I'm afraid I don't understand your tools Frank.
I guess I will wait until mkgmap has included the DEM handling.
Van: mkgmap-dev namens Frank Stinner
Verzonden: donderdag 2 november 2017
Hi Frank,
But my main question/problem with your tool is, there are no img files at all
in a gmap folder structure, so what do I have to do with this tool? Execute it
on the "old"format folder with no DEM data? Sorry but to me it is very
confusing now.
Van:
Hi Frank,
Thanks for your tool, but can you explain how to specify those img tiles since
the gmap folder does not contain any img?
This command does not work obviously:
GmTool.exe --overwrite --input
g:\mkgmap\Openfietsmap\versions\test\Openfietsmap(BNL).gmap\Product1\1001.img
--output
Hi Frank,
I have not recreate the TDB file. Can you or Nick explain how you do this, can
you use mkgmap for this?
___
mkgmap-dev mailing list
mkgmap-dev@lists.mkgmap.org.uk
http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
map-dev-boun...@lists.mkgmap.org.uk> namens lig fietser
<ligfiet...@hotmail.com>
Verzonden: maandag 30 oktober 2017 11:09:17
Aan: mkgmap-dev@lists.mkgmap.org.uk
Onderwerp: Re: [mkgmap-dev] a new DEM-File Option
Hmm sounds too complicated. I'm generating the DEM data again, I made a mi
1 - 100 of 144 matches
Mail list logo