2 the Last attack and have a lightpen (if you
mean barcode reader) for trade.
Please mail me directly in order to come to some deal.
Regards,
Jeroen Smael
mailto:[EMAIL PROTECTED]
mailto:[EMAIL PROTECTED]
- Reply to All the Original Message -
Author: msx-admin
To: <[EMAIL PROTECTE
My problem:
- Olivier Gillot send me a lousy COPY in stead of an original!!!
So for all you boys and girls out there looking for ORIGINAL games:
Don't pay before you receive when dealing with Olivier Gillot.
Regards and good hunting,
Jeroen Smael
P.S. Does anybody out there own an original
Ladies and Gents,
I have two small technical questions for ya'll.
(1) How can I check in my program if it is running on an emulator or on 'the
real thing'?
(2) Which emulators support (all) undocumented Z80 instructions?
Regards,
Jeroen Smael
--
For info, see http://www.
? Does someone have a schematic of how to connect a cartridge slot to this
card?
Hope somebody can help me solve this problem (would save a lot of deskspace
;-)).
Regards,
Jeroen Smael
--
For info, see http://www.stack.nl/~wynke/MSX/listinfo.html
power up the 'MSX' are that it powers up, but does
not (correctly) run the cartridges. It seems to do something, but I cannot make
out what it does AND it is not consistent.
PLEASE HELP ME, I'M DESPERATE!
Does anybody have the schematics for this card (at LEAST of the connector)!
R
(colour) coded, so if your monitor/TV can't handle the
CVBS (or YC) signal, using RGB (or YUV) is the best solution.
Regards,
Jeroen Smael
FutureDisk
Homepage: http://www.futuredisk.msxnet.org/
--
For info, see http://www.stack.nl/~wynke/MSX/listinfo.html
at someone did some nifty soldering in one
of my Sony's in order to fit it with an 'International' keyboard.
Anyways: Thanks for all reactions.
Jeroen Smael
--
For info, see http://www.stack.nl/~wynke/MSX/listinfo.html
Hi,
Perhaps a stupid question about the Sony HB-F700 MSX2.
I have three Sony HB-F700 computers. Two of them have HB-F700D and one has
HB-F700P on the casing.
What is the difference between the two models?
Regards,
Jeroen Smael
P.S. Depending on the answer I'm willing to sell one or t
> [EMAIL PROTECTED] wrote:
>> beessie (17:48 and still @ work)
[EMAIL PROTECTED] wrote:
> Think that's bad? It's 18:10 now and my working day lasts until
> 22:30... and I started in the morning, too.
Hi you two,
Did you start at 06:45 just as I did, or did you start at 11:00 and are just
mak
Eric Boon Wrote:
> The fun part is that I never received the original mail with the attachment
> - only a warning mail from the mail-daemon that the attachement was infected
> (which also gave me the info that Jeroen Smael and me are the only ppl from
> ICT on the the msx-list
[EMAIL PROTECTED] wrote:
>> Hi Manuel,
>>
>> I think Marco meant it the other way around (MCCW
>> working for us), but I guess you couldn't resist the
>> opportunity to draft people for MCCW ;-)
>
> Of course. And we talked a little about sharing articles
> in the past. We never worked it out th
ou see, as
> far as I know, they just don't have the motivation
> anymore.
>
> In case I am wrong: PLEASE JOIN US! ;-)
> Actually, that goes for anyone.
Hi Manuel,
I think Marco meant it the other way around (MCCW working for us), but I guess
you couldn't resist the op
stand that you don't want to do this
for free ;-)
Hope to hear from you soon!
Jeroen Smael
FutureDisk
PS. For all of you who DON'T know the FutureDisk (is there
anyone who hasn't heard of us?), here's our homepage:
http://www.futuredisk.msxnet.org/
Problems?
Manuel wrote:
> You mean soldering
> the *two* returns (CVBS/monochrome and AUDIO)
> to the GND pin? Or just one? This may sound
> a silly question but, as my cassette connector
> cable has only one of the two cables (in, out)
> soldered in the GND pin, I was wondering.
>
> Thanks to you two for y
Manuel wrote:
>> Monitor connector Philips
>>
>> pin 7 NC
>> pin 6 +12V
>> pin 3 AUDIO
>> pin 8 NC
>> pin 1 +5V
>> pin 5 CVBS (color video PAL)
>> pin 4 Ys (monochrome)
>> pin 2 gnd ('luminance')
>>
>> My guess is I should use these pins:
>>
>> pin #3 for the audio
>> pin #4 becaus
, please mail me!
Perhaps this was your REAL (and only) reason to react to my mail!!!
Jeroen Smael
FutureDisk
Homepage: http://www.futuredisk.msxnet.org/
MSX Mailinglist. To unsubscribe, send an email to [EMAIL PROTECTED] and put
in the body (not subject) "unsubscribe msx [EMAIL PROTE
Willem v/d Werf (Sysop MSX - VEENDAM) wrote:
<>
Please Willem, read the review again when you're not in a hurry, because
if you WANT to find something negative you ALWAYS WILL!
When I read the review (or at least the part that you send to the
mailinglist), I can only find (a) some personal opi
said this, you said that,
etc.), read again what I stated in my earlier reply:
Jeroen Smael wrote:
>Let me state again that this is not a personal vendetta against
>anyone or anything (MCCW)! This is just a sad remark that people are
>only willing to write down interesting things concer
Jeroen Smael wrote:
>So I will dare ~Grauw here in asking him PERSONALLY to write ANY
>article concerning MSX for us. By doing so I hope to prove that
>people in general, are just not willing to write articles for us.
Grauw wrote:
>> Please ~Grauw surprise me and write a NEW
st not willing to write articles for us (or any other
active magazine for that matter).
Please ~Grauw surprise me and write a NEW article for us ;-)
Regards,
Jeroen Smael
FutureDisk
Homepage: http:\\www.futuredisk.msxnet.org\
MSX Mailinglist. To unsubscribe, send an email to [EMAI
rest to ANYONE, then
for pietsake write them and publish them in still existing magazines,
don't wait until the MCCM rises from it's grave (if it ever does)!
Enough said,
Jeroen Smael
FutureDisk
PS. This doesn't mean that I don't want the MCCM undead(line) ;-)
Homepage: http://
[EMAIL PROTECTED] wrote:
><>
>
>> The reason that he asked money for it, is the same reason why Datax
>> asked money for Track magazine. Fokke really had a lot of work in
>> making MSX-Dos 2.40. And he only asked 25 guilders for it including
>> postage. People who are interested in this update can
all to the MSX2 bios (the MSX2 bios is put in a slot and called) and the
data (in RAM) you want to write to the VRAM
probably lies in the same slot as the MSX2 bios and is
therefor switched out. What you then see on the screen is
data from the MSX2 bios in stead of the data you wanted.
Hope
; He told me that the fair in Zandvoort is probably not going on... He has 3
> alternatives but he doesn't think it will work Maybe somebody can help him?
> The problem is that he hasn't got the money to fund it..
That is bad news indeed!
> Greets,
> Bart
Jeroen Smael
Futu
doing that! But maybe Koen can tell us more when he reads
> this...
>
> --[ MARI ]--
Hi,
Just jumping in here.
You can wait FOREVER for Koen's answer, as he doesn't read the
mailinglist.
Come by the FutureDisk stand in Tilburg and ask Koen personally.
Jeroen Smael
FutureDisk
Hi all,
Due to the pressure of releasing the FutureDisk BEFORE Tilburg, we
stupidly made 2 minor errors on the disk. Because of these errors you
cannot read the Dutch 'Nawoord' and the English 'Emulator Corner' (the
menu points to the wrong file).
THIS PROBLEM CAN BE CORRECTED!
Just surf to t
o pay for that.
[sarcastic mode off]
Jeroen Smael
MSX Mailinglist. To unsubscribe, send an email to [EMAIL PROTECTED] and put
in the body (not subject) "unsubscribe msx [EMAIL PROTECTED]" (without the
quotes :-) Problems? contact [EMAIL PROTECTED] (www.stack.nl/~wiebe/mailinglist/)
ee anything wrong with it (somebody else?).
Regards and happy (bug) hunting,
Jeroen Smael
FutureDisk
Homepage: http://www.futuredisk.msxnet.org/
MSX Mailinglist. To unsubscribe, send an email to [EMAIL PROTECTED] and put
in the body (not subject) "unsubscribe msx [EMAIL PROTECTED]&
MSX Mailinglist. To unsubscribe, send an email to [EMAIL PROTECTED] and put
in the body (not subject) "unsubscribe msx [EMAIL PROTECTED]" (without the
quotes :-) Problems? contact [EMAIL PROTECTED] (www.stack.nl/~wiebe/mailinglist/)
Hi Guys,
The new FutureDisk with lots of goodies, games and texts is on it's way.
It's a disk and we call it:
FutureDisk #36 - Compile edition
Available for non members at the MSX Fair Tilburg and the MSX Fair
Barcelona !
Jeroen Smael
FutureDisk
More info available at ou
ls is:
[EMAIL PROTECTED]
>greetz
>wolfgang
Greetz,
Jeroen Smael
FutureDisk
MSX Mailinglist. To unsubscribe, send an email to [EMAIL PROTECTED] and put
in the body (not subject) "unsubscribe msx [EMAIL PROTECTED]" (without the
quotes :-) Problems? contact [EMAIL PROTECTED] (www.stack.nl/~wiebe/mailinglist/)
helps (I'am willing te buy one or more of those 14 HDs).
>Grtz >*< TOM >*<
Greetz,
Jeroen Smael
FutureDisk
homepage: http://hagen.let.rug.nl/~s0957372/main.htm
http://www.futuredisk.msxnet.org
MSX Mailinglist. To unsubscribe, send an email to [EMAIL PROT
Hi All,
I got the connectors, I've got my soldering iron, I've got me some
wire, now what else do I need.
Ah yes, software. Is there any news about the software?
Jeroen Smael
FutureDisk
Homepage: http://www.futuredisk.msxnet.org
MSX Mailinglist. To unsubscribe, send an email
Hi Guys,
I have a simple question:
Does anyone have the manual for Hisoft GEN80 Assembler?
What I definitely need to know is how I can use conditional
compilation, e.g.:
if something
ld a,1
else
ld a,2
endif
Thanx in advance,
Jeroen Smael
FutureDisk
Homepage: http
the (many) menus (something like 'insert
barcode'). If you can't find it (the WordPerfect version I mean),
please let me know, as I also have another program that lets you
create barcodes (some German shareware programm). I'm afraid I cannot
help you any further with WordPerfect, beca
People,
The MSX scene is small. If we keep on fighting like this over emulator
users/real users, the MSX scene will get even smaller.
A TRUE MSX user is a user that loves the MSX, loves to play MSX games
and wants to keep the MSX system alive.
STOP THIS USELESS FIGHT AMONG EACH OTHER.
Jeroen
ridge, but also for post and package!
Jeroen Smael
FutureDisk
Homepage: http://www.futuredisk.msxnet.org/
MSX Mailinglist. To unsubscribe, send an email to [EMAIL PROTECTED] and put
in the body (not subject) "unsubscribe msx [EMAIL PROTECTED]" (without the
quotes :-) Problems?
t; MSX1 (DS9 /f) pins
> ==
> 1 - MSX2 pin 6
> 2 - MSX2 pin 7
> 3 - MSX2 pin 8
> 4 - x
> 5 - x
> 6 - MSX2 pin 1
> 7 - MSX2 pin 2
> 8 - MSX2 pin 3
> 9 - MSX2 pin 9
>
> MSX2 (DS9 /f) pins
> ==
> vice versa
After rereading all
I mean
isn't a jack (which only has three 'pins'). I meant a connector used
to connect professional microphones. It looks a bit like this (not
that it matters any more ;-) ):
---
/ o \
/ \
| o o |
\--^--/
By the way, I haven't seen any posting from Maar
r side.
Everybody who wants to connect to this network needs only one joystick
connector and one network cable.
Greetz,
Jeroen Smael
FutureDisk
Homepage: http://www.futuredisk.msxnet.org/
Patrick 'Patsie' Lina wrote:
> Hi all!
>
> I still say we stick with DB9 connectors bu
onnector can be used.
I suggest we let Patrick 'Patsie' Lina make a choice from the now
available options:
(1) tulp
(2) DIN
(3) microphone connector (I don't know the 'technical' name)
Patrick 'Patsie' Lina, make your choice and mail us the connections!
Greetz,
J
hing via the parallel port). This would also mean an easy to use
and implement driver. It would however mean that every MSX in the ring
becomes slower if the bus activity increases.
Hope this adds something to the discussion,
Jeroen Smael
FutureDisk
Homepage: http://www.futuredisk.msxnet.org
ery quickly on it. As I
believe my MSX won't last forever (I do HOPE it does), there will come
a time I can only access my MSX via PC. If that MSX has more
possibilities, then. WHY THE NOT.
I must however, insist that the current hardware is emulated first
(where is that HARD DISK em
nd to answer your question: FD#14 is the Kurt Cobain special.
Jeroen Smael
FutureDisk
Homepage: http://www.futuredisk.msxnet.org
MSX Mailinglist. To unsubscribe, send an email to [EMAIL PROTECTED] and put
in the body (not subject) "unsubscribe msx [EMAIL PROTECTED]" (without t
es in my procmail config..
>
>Thanks 4 your attention.
>
>-Sander
Does this discussion make you feel uncomfortable Sander ;-) ?
Jeroen Smael
FutureDisk
P.S. Wynke, if you start/continue your discussion somewhere else, please
let me know, as I find it very interesting!
MSX Mailingli
(head hunting and minesweeper)
For information about FutureDisk #35, or any other FutureDisk product, see:
http://hagen.let.rug.nl/~s0957372/main.htm
Jeroen Smael
FutureDisk
P.S. FutureDisk #36 will be released just before the MSX fair in Tilburg.
MSX Mailinglist. To unsubscribe, send an ema
#x27; live video with computer animations
using this cartridge?
Thanx in advance,
Jeroen Smael
FutureDisk
MSX Mailinglist. To unsubscribe, send an email to [EMAIL PROTECTED] and put
in the body (not subject) "unsubscribe msx [EMAIL PROTECTED]" (without the
quotes :-) Problems? cont
Hi Fabrice,
If you're looking for a REALLY good (disk)magazine, take a look at:
http://www.futuredisk.msxnet.org
Greetz,
Jeroen Smael
FutureDisk
Briareos wrote:
> Hello MSX World,
>
> I am looking for 3 things :
>
> - Good Magazines or Fanzines about MSX (Engl
with 60 Hz
(be it NTSC or PAL). The effect you see is that you lose color or that
the image is not synchronized (it seems to shake a bit). The only
remedy for that is 50 Hz.
Good luck,
Jeroen Smael
FutureDisk
Homepage: http://www.futuredisk.msxnet.org/
MSX Mailinglist. To unsubscribe, send
programs ;-), meaning a program to
transfer files between two MSXs.
And for all you people out there:
Is there anyone who could make this driver into a device (such as a
com port), in this way you could access it from MSX DOS.
I still have a few more questions and in due time I will ask them. Fo
thing at all is another way of describing it :-)
), so could someone please explain this or correct it.
The big question is: DO I NEED TO RESOLDER MY CABLE (hope not :-( )!
Jeroen Smael
FutureDisk
Homepage: http://www.futuredisk.msxnet.org
MSX Mailinglist. To unsubscribe, send an email to
ing for the CD's.
I wouldn't buy them if I where you, but who am I to decide that for
you!
Regards,
Jeroen Smael
FutureDisk
Homepage: http://www.futuredisk.msxnet.org/
P.S. If anybody knows if there are FutureDisks on the XTory CD's
please let me know so I can kick the living SH*T
53 matches
Mail list logo