Hi,
there is an option for a new MSX without having to adhere to legacy hardware.
Look at the Castle Iyonix computer (http://www.iyonix.com).
It is a new hardware based RISC PC (XScale, PCI, USB, Gigabit ethernet, etc), which
runs RISC OS.
For old software (in this case the problem is 26bit
I need OLD technology-based but NEW machine...
That is my small conclusion.
For that, contact Ademir Carchano (I believe) and buy one of his CIEL MSX
computers. ^_^
Or get yourself another working 2nd hand MSX.
Such a thing is not feasible for ASCII to produce...
~Grauw
Hi all
The solution: 4 inch ... multi-speed MSX digital ... ... plug.
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItemitem=2901028684ssPageName=ADME:B:SS:US:1
___
MSX mailing list ([EMAIL PROTECTED])
Info page:
-
From: Jun Sung Kim (???) [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Friday, December 20, 2002 6:07 AM
Subject: Re: [MSX] MSX without slots?
Hello still-MSXers,
I have a question.
What is MSX computer?
The answer seems to become more confused... after the revolution
On 2002.12.20 15:32 Carlos de Santa-Ana García wrote:
The solution: 4 inch ... multi-speed MSX digital ... ... plug.
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItemitem=2901028684ssPageName=ADME:B:SS:US:1
*LOL* That's USB too (Universal Serious Buttplug :-))
Eric
Are you sure about the universal part?
Snout
- Original Message -
From: Eric Boon [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Friday, December 20, 2002 21:02
Subject: Re: [MSX] MSX without slots?
On 2002.12.20 15:32 Carlos de Santa-Ana García wrote:
The solution: 4 inch ... multi
.
- Original Message -
From: Laurens Holst [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Saturday, December 21, 2002 3:11 AM
Subject: Re: [MSX] MSX without slots?
Hi Jun,
The difference with your PC?? There are a lot of differences. The 'new
MSX'
is supposed to become a very cheap
The USB MSX cartridge reader is not only interesting for MSX emulators but it
is also the first step towards a new MSX. If a new MSX will be developed,
then the new MSX will not have MSX cartridge slots. But it will have a USB
port. So then the USB MSX cartridge reader can be used
Néstor Soriano wrote:
But we must not forgot that cartridge slots are essential for
connecting new hardware, and thanks to it we have memory expansions,
SCSI/IDEs, MoonSounds, etc... how long could a new MSX survive without
cartridge slots?
USB can reach up to 12 Mbps, so, if a clever
USB can reach up to 12 Mbps, so, if a clever protocol
is designed, the entire cartridge bus can be emulated over the
USB cable.
I agree. I don't say that connecting slots through an USB port is a bad
idea. I just say that slots must not be optional.
*** XXIII MSX USERS MEETING
Néstor Soriano escribió:
USB can reach up to 12 Mbps, so, if a clever protocol
is designed, the entire cartridge bus can be emulated over the
USB cable.
I agree. I don't say that connecting slots through an USB port is a bad
idea. I just say that slots must not be optional.
I do agree
Ivan Latorre wrote:
I think that it is not very difficult to design a new cartridge slot
(with more than 50 pins and maybe of the same size for instance) where
you can insert old MSX carts.
Indeed, but then you get two problems. First one,
USB connector is much cheaper than a 50-pin
-like slot is the
connector size and it being serial. There can still be 2 'slots', and every
slot can be expanded aswell :). Plus that it is more standard. If a
manufacturer creates an USB device it can be used not only on the
'one-chip-msx', but also on PC, Mac, etc. if applicable. A seperate
Ricardo Bittencourt escribió:
Ivan Latorre wrote:
I think that it is not very difficult to design a new cartridge slot
(with more than 50 pins and maybe of the same size for instance)
where you can insert old MSX carts.
Indeed, but then you get two problems. First one,
USB connector
One question:
Couldn't be the slot system emulated by a external equipment?
Something like you have a USB 2.0 and you plug on that a external Slot
Set with 4 MSX Slots?
So, if possible, who need slots may just use it.
[]s
Julio Marchi
P.S.: I preffer the traditional MSX, with SLOTS
Hello still-MSXers,
I have a question.
What is MSX computer?
The answer seems to become more confused... after the revolution of
EMULATOR.
USB... and slot expander is connected to it.
Already good H/W exists... PC is that...
Why need new MSX hardware then?
The one of the reasons that I
Hi,
Bernard Lamers wrote:
Hmm, isn't it much easier and safer to use the value at #FCC1?
No, if it hasn't been initialized before. :)
Erm I don't see any possible situation in which this value has not been
initialized...? Or is there? All MSX BIOSes fill in this variable at
I wonder how many MSX-1s are still being used with that MSX2 upgrade? I know
of Brasil, never seen one here in the Netherlands.
Neos once sold a MSX1 - MSX2 upgrade cartridge in Japan, but I don't
think it sold very well, as this upgrade cartridge can be considered a
rare item nowadays. The
Yes, this is in the definition of the standard. It must be, because on
power-up all registers (including hA8) are zero. Therefore, the reset
routine (and thus the whole bios) must start at address 0, slot 0-0.
As far as I know, the standard doesn't say so.
The problem is that there might be
Hi Bernard! :)
Bernard Lamers wrote:
The problem is that there might be more than one MAIN ROM on MSXes
which use for example a MSX - MSX2 upgrade cartridge. The MSX1 rom in
such a configuration will indeed be located in slot 0 or 0-0, but the
MSX2 BIOS -which is the BIOS that should be used
The slot containing the BIOS which should be used on a MSX computer
can be found at location #FCC1. MSX1 documentation claims that this
address contains a byte indicating whether or not slot 0 is expanded,
but all later ASCII documentation -including the MSX Datapack- defines
it as slot
If the second BIOS was not found and initialized there is not much chance it
will function :)
The first MSX BIOS (which will be at slot 0-0 due to the way the hardware i
have seen is initialized) must find the second MSX BIOS in the standard way,
if that BIOS is designed well and let it
Hi,
Bernard Lamers wrote:
Hmm, isn't it much easier and safer to use the value at #FCC1?
No, if it hasn't been initialized before. :)
(P.S. Javi, congratulations with your new job. We are waiting for you
over here.)
Don't celebrate yet. I have the job, but I still don't have the visa. I
Hi all,
Can I safely assume that MAIN-ROM is located on slot 0-0 on every MSX
computer out there?
Regards,
--
Javi Lavandeira ([EMAIL PROTECTED]) - http://www.ag0ny.com
--
For info, see http://www.stack.nl/~wynke/MSX/listinfo.html
I have never seen otherwise, slot 0-0 lowest 16k is always msx bios
rom
- Original Message -
From: "Javi Lavandeira" [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Sunday, February 17, 2002 15:45
Subject: Slots
Hi all,
Can I safely assume that MAIN-ROM is located o
Yes, this is in the definition of the standard. It must be, because on
power-up all registers (including hA8) are zero. Therefore, the reset
routine (and thus the whole bios) must start at address 0, slot 0-0.
Bye,
shevek
On Sun, Feb 17, 2002 at 11:45:21PM +0900, Javi Lavandeira wrote:
Hi all,
Laurens,
Doesn't it use ANY v9958-specific feature??? Not even the scrolling???
Well... that's cool to know.
IC changes the color pallete in the last 1/3 of screeen. Like Princess
Maker and some DEMOS. I don't remember of others tricks.
Ah! IC moves large bitmaps over the screen!!
Hello
Somebody mentioned, that ther is only one expansion slot in SVI 278.
Actually the flat ribbon connector in the back of SVI 278 is the expansion
slot 3 of SVI 278.
You jus make an adapter to convert it to a cartridge slot ! (Very easy to
do !)
uhm. Could you get me the schematics for
Hey, this sounds real cool. That would be almoust ideal monitor for my
Casio MX-10 (MSX1), that is smallest computer, that I have seen !
Hey, I think I saw this one at MSX Sampa'97!
A small MSX1, with 8k RAM, 7VDC, like a Speccy (one piece, mainly
keyboard, and just one
On Wed, 16 Sep 1998, Kari Lammassaari wrote:
I have programmed a driver program for 4*20 char LCD-screen. (It works also
with DOS ! ) Just write WIDTH 20 and You have truly portable MSX.
Hey, this sounds real cool. That would be almoust ideal monitor for my
Casio MX-10 (MSX1), that is
uhm. Could you get me the schematics for this?
The schematics for the expansion slot of SVI 278 is very easy:
Pin 1 corresponds the pin 1 of game slot and so on ... :-)
Sincerely Kari
MSX Mailinglist. To unsubscribe, send an email to [EMAIL PROTECTED] and put
in the body (not
31 matches
Mail list logo