On 5/2/05, Isaac Richards <[EMAIL PROTECTED]> wrote:
> If you enable certain arch types in gcc, it'll refuse to compile mmx code.
> Same issue that the x86-64 folks have.
Ah ok, I hadn't realised that.
___
mythtv-dev mailing list
mythtv-dev@mythtv.org
ht
On Monday 02 May 2005 04:27 pm, James Stembridge wrote:
> On 5/2/05, Isaac Richards <[EMAIL PROTECTED]> wrote:
> > On Monday 02 May 2005 04:08 pm, James Stembridge wrote:
> > > Why not just determine mmx support at runtime? That would save
> > > the whole is/isn't mmx enabled questions.
> >
> > Bec
On 5/2/05, Isaac Richards <[EMAIL PROTECTED]> wrote:
> On Monday 02 May 2005 04:08 pm, James Stembridge wrote:
> > Why not just determine mmx support at runtime? That would save
> > the whole is/isn't mmx enabled questions.
>
> Because it's a compiler issue?
I'm not sure I follow. The easy approa
On Monday 02 May 2005 04:08 pm, James Stembridge wrote:
> On 5/2/05, Terry Barnaby <[EMAIL PROTECTED]> wrote:
> > I do think there are still issues and a lack of information
> > on what settings should be used for configure ...
>
> Indeed. Why not just determine mmx support at runtime? That would s
On 5/2/05, Terry Barnaby <[EMAIL PROTECTED]> wrote:
> I do think there are still issues and a lack of information
> on what settings should be used for configure ...
Indeed. Why not just determine mmx support at runtime? That would save
the whole is/isn't mmx enabled questions.
James.
___
Daniel Kristjansson wrote:
9. My MythTv config line is:
./configure --prefix=/usr --enable-xvmc-vld --cpu=i686\
--enable-dvb-eit --enable-dvb\
--dvb-path=/data/src/MythTv/include; qmake mythtv.pro
Note: "--cpu=i686" is needed to get MMX working.
This seems to be the
> 9. My MythTv config line is:
> ./configure --prefix=/usr --enable-xvmc-vld --cpu=i686\
> --enable-dvb-eit --enable-dvb\
> --dvb-path=/data/src/MythTv/include; qmake mythtv.pro
> Note: "--cpu=i686" is needed to get MMX working.
This seems to be the opposite of what you wa
Updated info on Current state of MythTv using Via XvMC VLD
Hardware MPEG decoding.
Just a short note to update people with the status of MythTv
when using Via XvMC VLD hardware MPEG decoding.
This is based on my setup using an Via M10K box as a TV Client
directly driving a 4:3 PAL TV Via S-Video. D
Andrew Wilson wrote:
I'm seeing a lot of problems on audio using XVMC. I'm using 0.18, and
the description below applies to that. CVS of about a week ago (last
time I tried it) was unusable as the audio was awful.
When I turn off XVMC VLD hardware decoder, the M10k can't keep up.
However, I found t
On May 1, 2005, at 1:10 PM, Jason Flynn G7OCD wrote:
Does this square with what other folks are seeing?
I'm using XvMC on Nvidia and I'm seeing/hearing
similar things. I've been getting major stuttering
when the OSD is on when I have GL-sync on. If I
recompile without GL-sync the OSD runs smooth.
Jason Flynn G7OCD wrote:
Does this square with what other folks are seeing?
I'm using XvMC on Nvidia and I'm seeing/hearing
similar things. I've been getting major stuttering
when the OSD is on when I have GL-sync on. If I
recompile without GL-sync the OSD runs smooth.
0.18 HTH, J
I had ma
> Does this square with what other folks are seeing?
I'm using XvMC on Nvidia and I'm seeing/hearing
similar things. I've been getting major stuttering
when the OSD is on when I have GL-sync on. If I
recompile without GL-sync the OSD runs smooth.
0.18 HTH, J
Send instant messages to your onlin
I'm seeing a lot of problems on audio using XVMC. I'm using 0.18, and
the description below applies to that. CVS of about a week ago (last
time I tried it) was unusable as the audio was awful.
When I turn off XVMC VLD hardware decoder, the M10k can't keep up.
However, I found that if I turn off de
Hi Terry,
On 5/1/05, Terry Barnaby <[EMAIL PROTECTED]> wrote:
> Just a short note to update people with the status of MythTv
> when using Via XvMC VLD hardware MPEG decoding.
...
I'm using a very similar setup, and it also works well for me, though
I find playback is very sensitive to system load
Just a short note to update people with the status of MythTv
when using Via XvMC VLD hardware MPEG decoding.
This is based on my setup using an Via M10K box as a TV Client
directly driving a 4:3 PAL TV Via S-Video. DVB-T cards are used
in a separate server.
Works well with MythTv CVS 2005-04-23 (Pr
15 matches
Mail list logo