And here's my lircd.conf file - it's gzipped to bring it under the
mailinglist attachment limits.
You may find it doesn't work for your sky navigator - I found a couple
of other lircd files online for that remote which didn't work with mine.
I presume this is because it's using the raw IR
On Fri, Dec 17, 2004 at 11:17:11PM -0600, Andrew Close wrote:
-Nate
http://hauppauge.com/pages/compare_pvr.html
One thing I am curious about. The pictures of the 150-MCE show it with
two RF jacks on the board. The 150 non-MCE that I have had just one
RF jack on the board, as per its
Try to reload lircd
/sbin/service lircd restart
'Couse I have to reload this service twice to work for me, so I add upper
line to my /etc/rc.d/rc.local twice. I have FlyView tuner.
I hope this will work
- Original Message -
From: Gabe Rubin [EMAIL PROTECTED]
To: Myth User [EMAIL
I have been going through Jarod's guide and got stuck
at the install mythtv step. I saw the BIG, FAT, IF
YOU MISS IT, I WILL SCOLD YOU, WARNING[1] ...
kde-redhat.atrpms.net entries in /etc/apt/sources.list
(simply place a # in front of all kde-redhat lines)...
I looked in my
Hi
I just installed MythDVD. It plays OK, but is cropping off the bottom
of the picture. If I hit f mplayer toggles from full screen mode to
have mplayer window edges and then I can see all of the picture. When I
do this the picture shifts up to be centered in the mplayer window edges
and I
do you have any packages from hoary? In particular libgtk (perhaps as
a dependancy of firefox or something you may be tracking in hoary)? I
had this problem, looks like gdm doesnt like the gtk 2.6.0 in hoary.
BTW. gtali also fails to work with hoary gtk.
I downgraded.
Dave
On Sat, 18 Dec 2004
nate s wrote:
On Fri, 17 Dec 2004 15:43:26 -0600, Kevin Kuphal [EMAIL PROTECTED] wrote:
Michael Messner wrote:
Hey mythTV users,
I like to make my fileserver also to the backend server for mythTV,
the fileserver is running with trustix (www.trustix.org) without a
XServer and also without any QT
Try to reload lircd
/sbin/service lircd restart
'Couse I have to reload this service twice to work for me, so I add upper
line to my /etc/rc.d/rc.local twice. I have FlyView tuner.
I wish that were it, but I have tried rebooting, restarting and
everything with that. It is wierd, because
Dual channel is a motherboard feature. There is no difference between
buying a dual channel memory kit or buying two sticks seperately, not
physically at least.
Correct, I don't know what the other guy up there is talking about..
THe only distinction that the kits have besides
higher
My 0.16 setup has been working fine for a couple of months now (or since
0.16 came out, anyway), but the last few days it's been having problems
recording...
Some recordings seem to spontaneously abort. It doesn't happen to every
recording, and I haven't been able to track down any specific
I wish I could say you are correct about ignoring the
warning. Unfortunately, I get an error when I try to
apt-get mythtv suite. Any thoughts? See below for
the error I get.
Thanks,
George
[EMAIL PROTECTED] root]# apt-get install mythtv-suite
Reading Package Lists... Done
Building Dependency
alright, I will now confess to my Newb-ness. How can I tell what version of
ivtv I am using? BTW, did you go to FC2 from FC1? how was that transition?
The main reason I wanted to go back to FC1 is I have the files already
downloaded and burned.
thanks, George --- David George [EMAIL PROTECTED]
I ran into the same problem 2 days ago when I tried to upgrade my myth box.
If you try to install mythdvd you get an error about transcode, if you
install transcode you get more errors... I'm not real proficient at fixing
problems and ended up starting from scratch with FC3 and just finished
[Sorry if this is a re-send. I sent this yesterday and haven't seen
it appear yet on the list.]
Hi. For various reasons (mainly some experimentation with a diskless
frontend) I decided to upgrade my FC2-based combined backend/frontend
from atrpms to cvs. I used the how-to at
On Sun, 2004-12-12 at 22:10 -0800, Jarod Wilson wrote:
On Sunday 12 December 2004 14:19, [EMAIL PROTECTED] wrote:
I have setup my FC2 MythTV box using Jarod's great guide and I'd like to
now upgrade to FC3. How can I do this via apt-get? I think I saw a how-to
earlier on the list, but have
On Sun, 2004-12-12 at 22:10 -0800, Jarod Wilson wrote:
On Sunday 12 December 2004 14:19, [EMAIL PROTECTED] wrote:
I have setup my FC2 MythTV box using Jarod's great guide and I'd like to
now upgrade to FC3. How can I do this via apt-get? I think I saw a how-to
earlier on the list, but have
On Fri, 17 Dec 2004 13:36:42 -0800, nate s [EMAIL PROTECTED] wrote:
Agreed. In posting that, I didn't mean to be doing any
scaremongering. I mostly found it to be usefull information on the
DVI spec.
I don't at all think that people should shun nvidia and buy only ati
cards for dvi now,
Peter Lee wrote:
The upgrade went smoothly, except for one thing: The OSD is not
working. Everything else seems to be working perfectly. I can pause,
ff, rewind, etc in both live and recorded tv and it works just fine,
but just no osd. The program guide works. But OSD-related things are
not
Ok - first - I'll be the first to admit - I don't know what TLS but it seems to
be what is preventing MythMusic from starting.
Here is my STDOUT/STDERR during mythfrontend startup:
2004-12-18 13:21:12.479 mythfrontend version: 0.16.20041207-1 www.mythtv.org
2004-12-18 13:21:12.480 Enabled
In answer to myself, the issue was caused by mplayer trying to figure
out the correct aspect ratio itself
I have switched to using xine (dvd menu support) and have overridden its
autodetected aspect ratio, hard coding to 4:3
HTHSITF
S
Hi
I just installed MythDVD. It plays OK, but is
Hi all,
Ive been running mythtv cvs for about 4 months, and ive noticed that
if i tell it to automatically flag commercials, the back end will hang
as soon as it starts trying to flag commercials for any recording or
if i ask it to transcode somthing. This hasnt been a problem so far,
but id
Whatever problem I was having with nuvexport now seems to be resolved, so I
can now create a cutlist in mythfrontend, fire up nuvexport, and get an
edited MPEG-2 PS (I have a couple of MPEG encoders installed) out.
The PVRx50 and friends produce MPEG-2 video and MPEG-1 layer II audio. The
video
Joseph Caputo wrote:
My understanding was that dual-channel needed at least PC3200 RAM (400
MHz); the difference in price is probably due to the fact that if you're
not running in dual-channel mode most mobos fall back to PC2700 speeds
(333 MHz), so if you're not running dual-channel there's no
On Sat, Dec 18, 2004 at 10:30:30AM -0800, Bruce Markey wrote:
Ah, that's the other side of the /. As far as the server and
interface is concerned, the filename are internal data and
don't need to be human readable. Someone already wrote a script
to create symlinks with readable names that
On Sat, Dec 18, 2004 at 07:06:48PM +, Gavin Hurlbut wrote:
Brad Templeton [EMAIL PROTECTED] wrote:
I just encountered a somewhat serious bug. I noticed my partition was
low on disk space, and deleted some older videos, and while the files
were deleted and to du they were gone, to df
Tell us what motherboard and CPU you are planning on using. THe key rule
is to find a balance between the speed of the ram, speed of the fsb to
the cpu and CAS Latency.
Lets look at 3 Kingston RAM chips from newegg. This is just a
representativeness of what is out there, I'm not recommending
On Sat, 18 Dec 2004 13:22:48 -0500, mielikki-ivtv
[EMAIL PROTECTED] wrote:
Peter Lee wrote:
The upgrade went smoothly, except for one thing: The OSD is not
working. Everything else seems to be working perfectly. I can pause,
ff, rewind, etc in both live and recorded tv and it works just
are causing me troubles. Is there any
plan in the works to change it from output-filename.ext, o-f.1.ext,
o-f.2.ext, ad nauseum?
I would like to have an output something like Rob Black and Your
Money-20041218-1004-1000.1030.asf
Would this be useful to anyone else?
rob
On Sat, 18 Dec 2004 13:32:05 -0500, Tom E. Craddock, Jr.
[EMAIL PROTECTED] wrote:
Peter Lee wrote:
[Sorry if this is a re-send. I sent this yesterday and haven't seen
it appear yet on the list.]
Yup, your first one came thru at about 1:00 am EST.
Tom
Ah, sorry about that. Weird that
Brad Templeton wrote:
...
does the frontend just magically check the NFS filesystem first to
see if it can read the file directly before asking the server to stream
it?
Yes.
How does this work if the frontend is also a slave backend, as I will
probably do because I want to insert a pvr-250 in it
Happy Christmas mythtv community!
I am in the process of working through Jarod's (brilliant) FC3 install
instructions.
I have an issue with my Optical media:
a) my DVD decice is /dev/hda (my hard discs are twin SATA in RAID 0)
b) I must manually mount the DVD drive outside myth, to be able to
OMG, I flunked my maths! :(
the 500MB /minute isn't unusually high for SDTV content, you reckon?
Hahaha.. finally realised what's going on.. After each recording,
mythtranscode transcodes my recordings from approx 1.5GB to around
35GB.. No wonder I suddenly went out of space...
Regards.
Hello,
I have installed mythtv on a slackware 10, but when i try
to see tv i have this error: Couldn't find Xv support
i have a PVR 350 with ivtv 0.3.2 and i use mythtv from
cvs
Thanks
Laurent
2004-12-19 01:18:29.105 mythfrontend version:
0.16.20041207-1 www.mythtv.org
I just had to replace my lola x10 remote today (never could get it to
work with the new kernel), and I went to radio shack to pick up a new
one. The 3-in-one remotes are selling for less than $5 right now and
it looks pretty sleek. It could use a few more buttons, but I have
things set up for
Hi
I've tryed to look in old mails about the internal player but i can't
get much out of them... is the cvs version of mythtv more effective
(especially for sound) than the current?
The internal player only plays movies at around 2200 kbit live,
probably a little bit more from a recording. When
Hi all,
I've tried everything I can, but I just can't seem to get lirc to work for me.
I do all the kernel compilations, with all the required modules, but when I run
the
/usr/local/bin/irw program, nothing shows up when I press buttons on the remote.
I've checked to make sure the IR cable is
David Bosiljevac wrote:
Hi all,
I've tried everything I can, but I just can't seem to get lirc to work for me.
I do all the kernel compilations, with all the required modules, but when I run
the
/usr/local/bin/irw program, nothing shows up when I press buttons on the remote.
I've checked to make
(commute, at work, whatever).
However, the output naming conventions are causing me troubles. Is there any
plan in the works to change it from output-filename.ext, o-f.1.ext,
o-f.2.ext, ad nauseum?
I would like to have an output something like Rob Black and Your
Money-20041218-1004
I saw this posting and thought it might help me fix
the fact that I do not have a kde line in my
sources.list file. However, I am too much of a newb
to know 1. If this is my solution. 2. If it is the
required solution, what actions I need to take to get
the expanded sources.list file.
I would
Ståle Undheim wrote:
After some problems I finally got sound working in video4linux. Sound
is through a cabel into line-in on my soundcard. The TV card is
pinnacle PCTV pro - running linux debian sid 2.6.9-1-686. It works
fine in tvtime and xawtv, but not in mythtv.
The first thing I found that I
On Friday 17 Dec 2004 23:01, TJ Hunter wrote:
I'm thinking about getting two Hauppauge PVR-250 capture cards so that
I can record (or watch) more than one channel at a time. I also need
another card that has video-out, correct? What card would you all
recommend for this?
Do you really need
41 matches
Mail list logo