I would like to know the correct Linux xorg.conf
modeline to use when
connecting an Athlon xp 1800 PC with a GeForce FX 5200
video card to an
RCA HDTV monitor (16:9 aspect ratio), model #D40W20.
I am using a DVI
cable to connect the two. When I use Jarrod's
xorg.conf at
http://wilsonet.com/mythtv
Hi,
This will sound dumb as the solution would be to checkout an earlier
version of Mythweb from the CVS which would be compatible with the CVS
checkout of my compiled Mythtv...
Tho, I really like the updates made to Mythweb and I was wondering if
there was something I could do in order to make i
No longer stumped. I replaced my ethernet hub with an ethernet switch
and all my problems went away
It seems that watching TV is a little more forgiving than watching
Recordings
Thanks to all...
Greg
On Sat, 2005-02-05 at 00:05, Michael Wester wrote:
> just re-read my e-mail. should
The saa7115 is a module used by the capture card. My logs are full of
them too, and I assume everyone else as well.
There are channel fine tuning controls that may help with your snowy reception.
On Sun, 6 Feb 2005 10:58:55 -0500, Gary McMeekin <[EMAIL PROTECTED]> wrote:
> Hi, I am running a PV
Two channels being lesser quality out of many is more likely to be a
result of the quality of the signal going into the card, although I
suppose it could be a marginally defective card, but that seems unlikely.
I'd put a tv in place of your card and see what you get. Also I suggest
if you can
On Fri, 4 Feb 2005 11:56:42 -0500, [EMAIL PROTECTED]
<[EMAIL PROTECTED]> wrote:
> Has anyone else daisy chained these cards?
Even if it were possible - which, apparently, isn't the case, I
wouldn't do it. I tried daisy chaining Nova-T cards, which is possible
but leads to significantly lower si
Hi, I am running a PVR-350 on FC3. Everything works fine except that
the /var/log/messages logs the follow approx. every 30 secs?
Feb 6 10:41:11 mythtv kernel: saa7115: decoder set size
Feb 6 10:41:12 mythtv kernel: saa7115: decoder disable output
Feb 6 10:41:12 mythtv kernel: saa7115: decoder
Hello Jens...
I'm trying to run you script, which is very a nice add-on, but i've some
problems with the perl-module POP3Client.
Can you help with this.
I'm running FC1.
Thanks
Patrick
___
mythtv-users mailing list
mythtv-users@mythtv.org
http://mytht
On Feb 6, 2005, at 03:39, Troy Foster wrote:
I just bought a Mad Dog Dominator Radeon 9550 128mb AGP graphics card
today. I didn't notice until tonight that according to many of you on
this list, xvideo will not usually work with ATI cards. This card
claims "Graphics by ATI", but on CompUSA's web
Hi,
Been playing with the Amazon Web Services API, and wrote a couple of
functions to enhance MythMusic as a couple of learn-in projects. So no
guarantees I'm afraid, but I like having all the album art, thought
others might too.
*The first utility goes through every album in the MythMusic databa
Hello everyone,
my mythfrondent complains about a missing decoder when starting liveTV.
I'am using a DVB-S card on a VIA EPIA-M Motherboard. MythTv is compiled
with activated USING_XVMC_VLD.
When I switch to LiveTV the screen turns from black to blue and
the mythfrontend prints these messages onto
> Since some repositories for FC1 are no longer
> available I guess its time to upgrade to either
> FC2 or FC3. Is there any reason not to go to FC3?
> It seems to have settled down a bit at this point.
>
> This is an x86 box with two (older) PVR-250's and an
> nVidia card.
>
I am planning the sa
> Is it possible to invoke nuvexport from mythtv? - I can't
> find any menus
>
> (I did a make install from cvs (prefix=/usr))
>
> Sigurd
Nuvexport is a command line program. It will present you with several text
based menus when run.
___
mythtv-use
Chris Petersen wrote:
Maybe the possibility to disable (or enable) the function in the config
file would be nice before the .17 release.
Better yet (dunno why I didn't think of this earlier) -- I'll just
make sure the function exists before it gets called. (which I've done)
Hiro -- if you're r
Hi,
I just upgraded MythTV (and MythWeb) to 0.16 from 0.15, and have started
getting a strange mythweb error.
Attempting to connect to the MythWeb module returns a 'Internal Server
Error' in the browser and in my apache log files I see:
[Sun Feb 6 13:29:22 2005] [alert] [client 192.168.1.4]
/us
Since some repositories for FC1 are no longer
available I guess its time to upgrade to either
FC2 or FC3. Is there any reason not to go to FC3?
It seems to have settled down a bit at this point.
This is an x86 box with two (older) PVR-250's and an
nVidia card.
___
Didde Brockman schreef:
Well, I used ASUS version of the 5200 with active cooling and let me
tell you – its noise was _far_ from "minor". Actually, I had to buy a
new cooling kit for it as the noise level was intolerable (for me).
I second that.
My Asus FX5200 also has a very loud fan. But I noti
Is it possible to invoke nuvexport from mythtv? - I can't find any menus
(I did a make install from cvs (prefix=/usr))
Sigurd
___
mythtv-users mailing list
mythtv-users@mythtv.org
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
What do I need of libs to compile mythbrowser (hopefully not the entire
kde development package)
Sigurd
___
mythtv-users mailing list
mythtv-users@mythtv.org
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
As David said the one posted here works great,
I've attached what I *think* is the most recent revision to save you searching.
Configuration is done IN THE SCRIPT, rather than by running
'--configure' manually or through mythtv-setup.
Enjoy,
tv_grab_au
Description: Binary data
__
On Sun, 6 Feb 2005 04:07:08 -0700, Russ Dill <[EMAIL PROTECTED]> wrote:
> When telling mythweb to record any showing of the movie "Lilo &
> Stitch", it also decided to record every episode of the cartoon "Lilo
> & Stitch". I'm not sure how to prevent this.
How about optional input fields for mini
Hello,
yesterday i updated my mythtv and mythmusic with the cvs version. But
now i got an error if i want to update my MusicDatbase in mythmusic. It
searches the disk and when it update the db at 42% i got an error
message in the console:
[EMAIL PROTECTED] mythneu]$ mythfrontend -v all
2005-02-05 1
When scheduling recordings for a big list of things, like movies (ie,
clicking the movies button in mythweb), it'd be uselfull if movies (or
episodes) I have already recorded were highlighted or drawn with some
border, as scheduled recordings are.
It would be uselfull to be able to mark a recordin
mary wright wrote:
Hello
backup your mythconverg database - I usually use webmin to back it up,
and then when the db is recreated as part of the myth install run the
backup file as sql on the database.
I was just a little curious of how you would "run the backup file"
Sorry if I am a bit sl
On Sun, 6 Feb 2005 02:59:57 +1030, Steve Zamora <[EMAIL PROTECTED]> wrote:
> i was thinking that maybe if i charged, say,
> a $10-$20 annual fee for the service, i could afford to quit one of
> those jobs.
You might want to check out local IP laws and applicable Terms of Use
to be safe. Your data
Hi,
I hacked up a quick perl script to show sender and subject of the 5
most recent mails on a POP account in a scroller via mythtvosd. It's
not perfect, but it does the job for me. (I have it running as a cron
job every 5 minutes - it remembers which messages it has already
checked.) It shouldn't
Maybe the possibility to disable (or enable) the function in the config
file would be nice before the .17 release.
Better yet (dunno why I didn't think of this earlier) -- I'll just make
sure the function exists before it gets called. (which I've done)
Hiro -- if you're reading this, do you kno
On za, 2005-02-05 at 14:33 -0800, Chris Petersen wrote:
> > I'm getting this in a bunch of different places. Since this isn't a
> > default option enabled for PHP is there a workaround for those of us
> > using RPM distributions or will PHP compiled from source be required for
> > future releas
On Sunday 06 February 2005 01:58 am, Tom E. Craddock, Jr. wrote:
> Brian Foddy wrote:
> -snip-
>
> >I've double checked /etc/hotplug/firmware.agent and
> >FIRMWARE_DIR=/usr/lib/hotplug/firmware
> >and ll /usr/lib/hotplug/firmware/
> >-rw-r--r-- 1 root root 5908 Feb 5 23:03 dvb-fe-nxt2002.fw
> >
>
I just bought a Mad Dog Dominator Radeon 9550 128mb AGP graphics card
today. I didn't notice until tonight that according to many of you on
this list, xvideo will not usually work with ATI cards. This card
claims "Graphics by ATI", but on CompUSA's website it lists the card as
having an NVIDIA ch
Andy Whitworth <[EMAIL PROTECTED]> wrote:
>> I have been tinkering with a wap interface to mythtv and I see there is
>> a wap theme for webmyth, It looks like webmyth detects a wap browser and
>> switches to the wap theme but it still seems to generate html and not wml.
First off, it's mythweb, no
Solved. If you start mythtv without DVB support compiled in and then your
recompile with DVB support, dvb tables are not created.
Leandro
- Original Message -
From: "Leandro Dardini" <[EMAIL PROTECTED]>
To:
Sent: Saturday, February 05, 2005 11:34 PM
Subject: [mythtv-users] Tuning DVB-S
> > I'm afraid you could have saved yourself some time. A script that does
> > this is already in the contrib folder :
> > http://cvs.mythtv.org/cgi-bin/viewcvs.cgi/mythtv/contrib/mythlink.sh?rev=1.2&view=log
> >
> > Steven
>
> Doh, that would have been a better starting point. And I run into Ch
101 - 133 of 133 matches
Mail list logo