Latest myth of corse, running FC3, ABIT NF7-S
I have noticed that in a large number of recordings MythTv fails to
forward correctly.
What happens is that you:
1) press forward and find yourself somewhere far forward (5 min) and
backwards will not pass this position now
2) you press
Sounds like you forgot to compile VCD support
into mythdvd.
Optical Disks menu should contain Play
DVD, Play VCD. Mine also contains Import DVD and Import CD
From:
[EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Devan Lippman
Sent: Sunday, July 03, 2005 1:04
AM
To:
My mythtv system with a PVR350 was working just fine. until last night.
I've lost my sound from livetv. I think it happend during a recording.
Watching and recording did just fine, but now livetv give no sound at all.
The recording and livetv has no sound. Music and video works good.
I'd linked
Hi
Like a lot of other people I have the prebuffer pauses during playback
of my recordings on my frontend.
The stuttering happens every 3-5 seconds.
So I have printouts like these:
.
2005-07-02 23:06:25.654 A/V diverged by -3.39277 frames, dropping
frame to keep audio in sync
2005-07-02
Hey Matt, where are you from?
Your issues look almost identical to ones I have had with both
cutpoints and comm flagging.
I put the flagging down to the crazy aussie broadcasters. I thought
the cut-points must also be casued by the aussie DVB-T streams or
something, otherwise, it would have
I'm in south Canberra.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of David Whyte
Sent: Sunday, 3 July 2005 5:26 PM
To: Discussion about mythtv
Subject: Re: [mythtv-users] Cutpoints delayed bad
commercial flagging
Hey Matt, where are you
Thanks Dewey,
I will be using the HTPC into a flat LCD screen with DVI in. If I use
DVI
then the hardware decoder of the 350 is irrelevant, but what is the
heat/noise
tradeoff for software decoding likely to be using the AMD processor?
I think you may
be a bit confused about your
Hi,
See from a knoppmyth/pvr-500 howto that I should have partitions for /cache
and /myth:
select New, Primary with the size of your / partition
arrow down to free space
select New, Logical enter 500
arrow over to type and select swap from the list
arrow down to free
Hi,
I've been having problems getting mythtv to work with a Fusion HDTV
DVB-T card. I have the kernel driver side working and can use
tzap, dvbstream and mplayer manually to view TV through the card.
I'm using mythtv 0.18 with DVB enabled.
I have been having difficulty getting the channels
See from a knoppmyth/pvr-500 howto that I should have partitions for /cache
and /myth:
select New, Primary with the size of your / partition
arrow down to free space
select New, Logical enter 500
arrow over to type and select swap from the list
arrow down to free
My mythtv system with a PVR350 was working just fine. until last night.
I've lost my sound from livetv. I think it happend during a recording.
Watching and recording did just fine, but now livetv give no sound at all.
The recording and livetv has no sound. Music and video works good.
I'd
Phil, thanks for the tip. i'll do this when it is fixed.
I've tried the alsamixer, but no luck.
Like i said, i haven't change a thing. No upgrade or reset.
I recorded a show and then i happened.
i'm all out of my options
gr
Patrick
I'd try going into your favourite mixer program (such as
Yep, I got that too. Does it sound like audio fragments are being
mis-ordered? In speech you can sometimes hear the start of a word
before the end, or some parts of a word being repeated.
Does it go away when you pause/unpause?
My best guess is that there is a bug somewhere in the mpeg audio
Please don't hijack threads! In other words don't reply to a message and
change the subject when you want to start a new discussion.
It stuffs threading on most clients.
Thanks.
On Sun, 2005-07-03 at 07:36 +, Marius Schrecker wrote:
Hi,
See from a knoppmyth/pvr-500 howto that I should
Hi,
What's the current status of mythweb on mobiles?
I've been playing around with mythweb (r6764) from my mobile (A Sony
Ericsson P910i). I can browse listings and see recorded programs, but I
can't see scheduled programs (I get the mythtv icon, and the header
links, but no content).
Also, if
a) Read DOCS/HTML/en/codecs.html
b) Read the RealAudio section of the DOCS
then,
c) install the codec, or
d) update the codecs.conf in your ~mythtv/.mplayer directory to it's in
sync with the one distributed with your version of MPlayer (i.e. cp
/etc/mplayer/codecs.conf ~mythtv/.mplayer
On 03/07/2005, at 12:21 PM, Matthew Carle wrote:
I usually put cutpoints into a movie before I watch it so I can
just let it
run (I don't transcode). The problem is that it always plays about 10
seconds after the delete after this point cutpoints. The delete
before
this point cutpoints
Have had my knoppmyth-box running non-stop for 5 days now, working
flawlessly, recording every show I want. Today when I turned on the
TV I couldn't move around the menu, also tried with a keyboard and it
was totally locked. So I just force-rebooted.
Booted up fine and I went to watch TV,
Phil, thanks for the tip. i'll do this when it is fixed.
I've tried the alsamixer, but no luck.
Like i said, i haven't change a thing. No upgrade or reset.
I recorded a show and then i happened.
i'm all out of my options
and I assume you've rechecked the speaker wires and power (if you use
Looking for expertise in MythTV and XMLTV setup for a new country. We are
setting up MythTV in India and having a heck of a time. Initially, we are
setting it up using Knoppix, although we will recompile from scratch eventually.
We just want to get it up and running first. If someone (some
http://anandtech.com/tradeshows/showdoc.aspx?i=2317p=5
___
mythtv-users mailing list
mythtv-users@mythtv.org
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
Hi,
I'm trying to nuvexport a DVB (MPEG2 PS) recording to Xvid.
This all appears to work fine, but when I play back the video every
frame is badly corrupted.
I grabbed such a frame and put in online here:
http://members.optusnet.com.au/hnmoffatt/xvid-capture.jpg
I'm running Debian unstable +
Michael,
OK. This sounds like a problem with your external channel change
(script/transmitter or serial link/STB). If Myth said it's going to
record on channel 4, but recorded 3, it wasn't Myth's doing.
No it isn't. It works perfectly fine when I use it for Live TV, and it
works
Hi
I use ffmpeg to transcode my dvb-t recordings to watch on a PSP and I'm in the
UK. Everything works fine apart from anything I record from Channel 4. For some
reason, there is no sound when I play it back on the PSP. I believe the problem
is that ffmpeg seems to think there's two sound
I have this issue where, when trying to watch HD Cable on my HD3000
using DVB, the sound will stutter, causing playback to be jerky. It
happens almost universally when I first switch to the HD3000 (I also
have a pvr-350) and I usually manage that by switching off and then
back on to the card (Y).
On Sun, Jul 03, 2005 at 11:10:13PM +1000, Hamish Moffatt wrote:
I'm trying to nuvexport a DVB (MPEG2 PS) recording to Xvid.
This all appears to work fine, but when I play back the video every
frame is badly corrupted.
Hmm. I upgraded to the latest nuvexport and now it works ok,
though I must
Looks nice.. but not enough info...
On 7/3/05, Andrew J [EMAIL PROTECTED] wrote:
http://anandtech.com/tradeshows/showdoc.aspx?i=2317p=5
___
mythtv-users mailing list
mythtv-users@mythtv.org
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
Oh, thank you very much for this advice ! It could be the problem,
because before my last reboot (ie everything done by hand, and
of course ivtv loaded before mythbackend) everything worked well...
I will put everything in the right order, on /etc/rc.local (which is a
very convenient place
Run xmms! I know it makes no sense but if you run xmms it might just give
you a pop up telling you that your device is in use. I haven't had your
problem with livetv but I have had a similar problem with audio coming from
desktop sounds.
Let ye without segmentation fault cast the first int!
I had a PC do something similar... The power light was a gree/orange
combo LED, but never went orange other than for a brief fraction of a
second before power-down. I changed some RAM (that I found - never a good
idea) that was a tight fit. I rebooted and the drives and fans spun up,
Hi all,
Due to other reasons, I have had to upgrade my backend to the SVN
version, and thus I need to compile the MacOSX frontend with the source
from SVN/CVS.
I followed the instructions from:
http://www.mythtv.info/moin.cgi/MythOnMacOsx
and followed the instructions on how to set up OSX
Which video card are you using ?
I've sempron 3000+, ge force 2 mmx 440 (quite older card). But I dont
have any stuttering/jerkiness when I watch 1080i/720p. I'm running
0.18 and nvidia 7174 driver. When I installed using knoppix myth, I
think I had older nvidia driver (6629 ?). At that I did
Damn! It burned a hole in the mobo! Lol, How long did it live after that?
Let ye without segmentation fault cast the first int!
Korey Fort
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of flim
Sent: Sunday, July 03, 2005 9:39 AM
To: Discussion about
On 7/3/05, Korey Fort [EMAIL PROTECTED] wrote:
Run xmms! I know it makes no sense but if you run xmms it might just give
you a pop up telling you that your device is in use. I haven't had your
problem with livetv but I have had a similar problem with audio coming from
desktop sounds.
Let ye
Pekka Jääskeläinen writes:
Any ideas?
Are you absolutely sure you have DVB subtitles available (vs., for
example, TeleText subtitles). Do you use TS mode? If not, try changing
to it, as I haven't tested PS mode for a while.
Hi Pekka,
Yes, I'm on TS mode. However, I'm in Illinois and can
Hi,
With the seamingly great support for DVB in mythtv, I decided to give it a try
this week-end. On a Gentoo system I have got it all working (great ebuild!),
apart from the fact that I cannot get any picture. If I select to view TV, I
only get 10 seconds of black screen, and then back to
On Jul 2, 2005, at 7:52 PM, Patrick Vaughan wrote:
It's a Chaintech SKT600's onboard sound. Another poster said that
he's seen onboard audio that uses the other stereo ports to support
surround sound. I had thought that the external codec was probably
dependant on Windows drivers. I
Yes, I'm on TS mode. However, I'm in Illinois and can someone confirm that
we are receiving DVB subtitles? Is there a way for me to check in mythtv?
Ah, of course. The patch does not support the ATSC subtitles used in
USA, nor the
TeleText subtitles used in Australia. Only European DVB is
On 3 jul 2005, at 18.00, [EMAIL PROTECTED] wrote:I had a PC do something similar... The power light was a gree/orange combo LED, but never went orange other than for a brief fraction of a second before power-down. I changed some RAM (that I found - never a good idea) that was a tight fit.
I run FC3 and myth 18.1 with hauppauge 350
remote is working with irw but I can't get anything in mythfrontend
what did I forget
Please help.
--
-
Claude Gélinas agr., dta
Phyto Ressources inc.
==
Varennes, Québec,
I think you may
be a bit confused about your components. All of the
x50 cards (and the 500) are hardware encoding. The difference is that
the 350 does hardware decoding, which is completely irrelevant if your
sending the signal out through DVI.
Sorry if I was unclear. Was actually aware of
I run FC3 and myth 18.1 with hauppauge 350
Live tv don't work only get a black scren for few second and back to the
frontend display.
the machine is set as Kde is showing via the TV output of the 350
I've followed the fedora howto and the test
dd if=/dev/video0 of=/dev/video16 bs=64k
is
This is a piece of oddity that I can't seem to figure out.
I recently got lirc working on my Myth box (cvs on an FC4 box) and
have been trying to set up the lircrc file. Things start just fine,
but when I press any of the arrow keys while browsing the list of
recorded programs I get a
On Sunday 03 July 2005 09:59 am, Korey Fort wrote:
How old is your motherboard. You're motherboard may be dead if you don't
get any post codes, but it really sounds like a hardware failure somewhere
between the power supply and the motherboard. I had this problem with a box
before and it
Yeah, I've done that before too tony, but like he and you said he had booted
the box once.
Let ye without segmentation fault cast the first int!
Korey Fort
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Tony Rein
Sent: Sunday, July 03, 2005 11:52 AM
To:
Still got the box with a new mobo (also found)!
On Sun, 03 Jul 2005 15:53:59 +0100, Korey Fort [EMAIL PROTECTED] wrote:
Damn! It burned a hole in the mobo! Lol, How long did it live after that?
Let ye without segmentation fault cast the first int!
Korey Fort
-Original Message-
From:
Negative, that's not quite the symptom I'm describing. The length of
the recording doesn't change. This is definitely not a localtime
issue.
On 7/3/05, John Hanauer [EMAIL PROTECTED] wrote:
Can this have anything to do with it?
http://www.gossamer-threads.com/lists/mythtv/users/138493
I'm new to the list and planning on building a single MythTV box under $800
and I have a couple questions I'm hoping people can answer.
First, any specific suggestions on hardware and PVR cases?
Second, I don't have HD but I'd like to beat the broad cast flags issue, in
case it ever comes up
On Sun, Jul 03, 2005 at 10:32:15AM -0700, [EMAIL PROTECTED] wrote:
Second, I don't have HD but I'd like to beat the broad cast flags issue, in
case it ever comes up again, I'm thinking about the pcHDTV HD-3000. From the
looks of http://www.pchdtv.com/ this card won't work with my existing
This happens to me on every reboot. To fix it, I have to stop mythbackend, depmod -a and modprobe ivtv.
I tried to put this in rc.local like this:
/sbin/rmmod ivtv
/sbin/depmod -a
/sbin/modprobe ivtv
service mythbackend restart
but it doesn't work. Could it be that mythbackend is
running at
Yes, i double checked everything. I had an old myth copy (0.16) on an old
HD, When i hooked up this drive the sound was ok.
gr
Patrick
Phil, thanks for the tip. i'll do this when it is fixed.
I've tried the alsamixer, but no luck.
Like i said, i haven't change a thing. No upgrade or reset.
I
Hi all,
I'm looking for a non-Nvidia, quiet AGP graphics card
that does good HDTV playback in Myth. Any
recommendations?
I was originally using an NVidia GeForce 5200
(fanless) which worked great until I upgraded my
system to a new motherboard (foxconn) with an Athlon
64 processor. The system
I had an ATI card (9200SE) on my AMD 64 box which I was very pleased with.
Clearer and more stable picture into an old %0Hz TV than I have had with
any Nvidia card. Never quite got OpenGL and Screen resize and rotate working
before the machine was stolen, but that's because I didn't get around to
Hi list,
if this has already been answered, please just link me to it.
Here's my problem: I'm trying to install mythtv on a server without X
(debian unstable), but all I get when I install (in the database config
part) is a blue screen with white text tellin that [EMAIL
Pause/unpause doesn't seem to fix it.
Don't know about words being mis-ordered.
I'm not sure it's the audio anymore. I went tack and tried the Alt-TAB
trick on some
recording that had much higher bitrate (like 5000) and the Alt-TAB
trick doesn't fix
it this time over?
In case someone can read
Hello!
I have finally been able to successfully get a picture on my hd3k
card! But, I am far from sitting back on the couch flipping the
channels.
I am having some success using the cx88-atsc module. But, not really.
I can use:
getatsc /dev/dvb 13.1 file.mpg
And play it with mplayer. I can
Hi,
I'm installed MythTV 0.18.1 on an Asus Pundit with an Hauppauge WinTV
Nova CI dvb-s DVB card.
In mythtv-setup I setup a preferred starting channel on wich MythTV
tunes itself when I start Watch TV.
The problem is that when I selected a bad channel (i.e. a scrambled
channel) MythTV hangs
I like many others have a wireless keyboard for my Mythbox. One thing I
would like to be able to do with this keyboard is to surf the web using
Mythbrowser, but I find that very difficult considering that some keys
don't actually type but are actually bound to do something else (for
example,
I've just run mythfilldatabase, and have gone from:
Last mythfilldatabase run started on 2005-07-03 01:21 and ended on
2005-07-03 01:25. mythfilldatabase ran, but did not insert any new data
into the Guide. This can indicate a potential grabber failure.
There's guide data until 2005-07-14
Mine has since recovered to 12 days.
On 7/3/05, Kim Wall [EMAIL PROTECTED] wrote:
I've just run mythfilldatabase, and have gone from:Last mythfilldatabase run started on 2005-07-03 01:21 and ended on
2005-07-03 01:25. mythfilldatabase ran, but did not insert any new datainto the Guide. This can
What I have done is :
(Fedora) :
chkconfig --level 123456 mythbackend stop
to prevent the loading of mythbackend during the boot
and in rc.local :
/sbin/modprobe ivtv
mythbackend
This solved my problem definitely.
Steve Naylor a écrit :
This happens to me on every reboot. To fix it, I
Hi.
I'm using MythTV 0.18.1 with an Hauppauge WinTV Nova CI dvb-s card, and
I can watch digital sat channels.
How I can get the Program Guide to use the EPG data?
At the time I can't see EPG data anymore, in the Program Guide nor in
the now watching window.
I compiled MythTV with the
I've configured my HD3000 as DVB. I can record channels and watch live
TV from myth.
On 7/3/05, Chad [EMAIL PROTECTED] wrote:
Hello!
I have finally been able to successfully get a picture on my hd3k
card! But, I am far from sitting back on the couch flipping the
channels.
I am having
On 3 jul 2005, at 23.21, [EMAIL PROTECTED] wrote:Yeah, I've done that before too tony, but like he and you said he had booted the box once. Ok, very weird. Now it works again, though the HD was corrupt (Kernel panic when booting) so I had to reinstall it all. What I did was to simply remove all
Hello all,
I have found a problem when scheduling some repeat programs - there is
this program I like to watch - Cutting Edge, but the problem is that its
title for this week is Cutting Edge: Gridlock, and the following week
it is called Cutting Edge: The House Cleaners and you can imagine
Sounds to me like you need a new email client, Nick. Shows up as a new
thread here.
On 7/3/05, Nick Rout [EMAIL PROTECTED] wrote:
I am sending this back to the list as well in case anyone else is curious.
On Sun, 03 Jul 2005 22:56:50 +1000
Rob Hillis wrote:
Nick Rout wrote:
Please
I think you need to be looking at the -map: option for ffmpeg, although
from the documentation I can't figure out exactly how to use it.
http://ffmpeg.sourceforge.net/ffmpeg-doc.html
On Sun, 3 Jul 2005 14:28:21 +0100
Mike Ryan wrote:
Hi
I use ffmpeg to transcode my dvb-t recordings to
On gmail anything could happen LOL
On Sun, 3 Jul 2005 18:17:03 -0400
Dewey Smolka wrote:
Sounds to me like you need a new email client, Nick. Shows up as a new
thread here.
--
Nick Rout
___
mythtv-users mailing list
mythtv-users@mythtv.org
On Sun, Jul 03, 2005 at 07:51:44AM -0700, Mudit Wahal wrote:
Which video card are you using ?
I've sempron 3000+, ge force 2 mmx 440 (quite older card). But I dont
have any stuttering/jerkiness when I watch 1080i/720p. I'm running
0.18 and nvidia 7174 driver. When I installed using knoppix
On Sun, Jul 03, 2005 at 05:19:35PM -0400, Egeekial wrote:
I like many others have a wireless keyboard for my Mythbox. One
thing I would like to be able to do with this keyboard is to surf
the web using Mythbrowser, but I find that very difficult
considering that some keys don't actually type
Chris
This is how I did it. This is all from memory...
You need to go and add a new transport for each of the stations
(frequency listed below).
Then go to scanning, and select 'Scan existing transports' - not
'complete scan (?)'.
This will then scan each of the five transports, and find each
That is the functionality I'm going for, though. I want a WebTV feel.
I still would like to be able to do it by remote also.
Robert Tsai wrote:
On Sun, Jul 03, 2005 at 05:19:35PM -0400, Egeekial wrote:
I like many others have a wireless keyboard for my Mythbox. One
thing I would like to be
On 3-Jul-05, at 6:12 PM, Piers Kittel wrote:
It'd be far better if I could set MythTV to say record Anything
similar to 'Cutting Edge' in it's name roughly in this time every
week?
I just posted something on this in the dev list. Popular question.
Under Manage Recordings - Schedule
On 7/3/05, Patrick de Brabander [mythtv] [EMAIL PROTECTED] wrote:
Yes, i double checked everything. I had an old myth copy (0.16) on an old
HD, When i hooked up this drive the sound was ok.
gr
Patrick
Phil, thanks for the tip. i'll do this when it is fixed.
I've tried the alsamixer,
On 7/2/05, Scott [EMAIL PROTECTED] wrote:
On Jul 2, 2005, at 2:43 PM, William wrote:
Even ota broadcast signals cannot all be captured as most good
content is encripted.
Not a flame, but do you, or anyone else, have a cite for this? i was
under the impression that OTA HD was not
On 7/2/05, Joe Barnhart [EMAIL PROTECTED] wrote:
Frankly, TV is a giant wasteland anyway and we'd
all be better off if we turned it off and read a book.
I always get a laugh when I read stuff like that on a mailing list for
a piece for software who's primary purpose is recording TV.
On 27/06/2005, at 9:34 PM, Phill Edwards wrote:
I'm assuming you mean for a DVB card? The setting is in mythtvsetup
under advanced in the capture card settings if I remember correctly.
I changed my settings to TS and I found that this caused an increase
in poor recordings. The symptoms
Problem: LiveTV very dark, recording very dark.
This is how far I got:
1. Installation of ivtv(0.3.6w.tgz) went OK.
2. Ptune-ui.pl running OK
3. Watching TV and changing channels through mplayer OK.
4. Installation of mythtv-0.18.1.tar.bz2 from source; no compilation errors. I
have not
On Sun, 3 Jul 2005 19:38:30 -0400
Donavan Stanley wrote:
On 7/2/05, Joe Barnhart [EMAIL PROTECTED] wrote:
Frankly, TV is a giant wasteland anyway and we'd
all be better off if we turned it off and read a book.
I always get a laugh when I read stuff like that on a mailing list for
a
At 01:51 PM 7/3/2005 -0600, Chad wrote:
So, to recap:
with the atsc module I get a video, but no audio and I can't switch
channels. With the dvb module, I appear to get everything configured
correctly, but get nothing.
With the dvb-based modules, the card has to load the frontend firmware,
My guess is that you're having problems with Qt.
There's a Qt-MySQL module that connects to the
database, and chances are, X is a dependency of Qt.
(The X libraries, not the X server, per se).
You could try to compile Qt embedded if you really
don't want X on the system. A MythTV server
Hi David,
At 2005/7/4 08:57+1000 Berry, David writes:
You need to go and add a new transport for each of the stations
(frequency listed below).
Then go to scanning, and select 'Scan existing transports' - not
'complete scan (?)'.
This will then scan each of the five transports,
On 7/3/05, Wendy Seltzer [EMAIL PROTECTED] wrote:
At 01:51 PM 7/3/2005 -0600, Chad wrote:
So, to recap:
with the atsc module I get a video, but no audio and I can't switch
channels. With the dvb module, I appear to get everything configured
correctly, but get nothing.
With the dvb-based
Hello!
After suggestions to use dvb, I decided to try harder to actually get
it working that way instead of using the atsc module. Success!
So I have been able to capture a test file, but mplayer says there is
no audio found:
Playing test.mpg.
Cache fill: 17.97% (1507328 bytes)TS file
On Thu, 2005-06-30 at 21:39 -0400, Dewey Smolka wrote:
Support for the 150 and 500 cards is improving quickly, though you may
have to update and tweak ivtv to get them running properly. The 250 is
supported very solidly and should work out of the box, especially if
you have a 350 already
On Fri, 2005-07-01 at 03:13 +0100, Nick wrote:
You also have the option of getting a USB-based receiver
instead.
Which would that be? I'm searching around for one.
Another option is to use a suitable wireless keyboard and a learning
remote, which negates the requirement to use LIRC on the
[EMAIL PROTECTED] 07/02/05 2:17 AM
So If I understand this correctly
Not quite...
250 - Hardware encoding, software decoding
Hardware encoding. No decoding. Input only.
350 - Hardware encoding, hardware decoding.
Yep.
150 - ?? encoding, ?? decoding.
Same as 250 -
On 7/3/05, Robert Tsai [EMAIL PROTECTED] wrote:
On Sun, Jul 03, 2005 at 07:51:44AM -0700, Mudit Wahal wrote:
Which video card are you using ?
I've sempron 3000+, ge force 2 mmx 440 (quite older card). But I dont
have any stuttering/jerkiness when I watch 1080i/720p. I'm running
0.18 and
I've found that Mythstream sometimes causes the whole frontend to
crash when playing a stream. I can't reliably reproduce the error at
the moment. It wouldn't be a major drama, except for the fact that the
stream doesn't stop playing after the crash and I can't find out the
process ID to kill it
On 7/2/05, PAUL WILLIAMSON [EMAIL PROTECTED] wrote:
[EMAIL PROTECTED] 07/01/05 10:15 PM
Thank you all for your responses. This has been extremely
helpful and the fog is starting to clear.
Paul thanks for your suggestion of dumping my 300 cd carousel.
I like the carousel but I like
On Sun, 2005-07-03 at 22:51 -0400, PAUL WILLIAMSON wrote:
[EMAIL PROTECTED] 07/02/05 2:17 AM
250 - Hardware encoding, software decoding
Hardware encoding. No decoding. Input only.
350 - Hardware encoding, hardware decoding.
Yep.
So, based on this input. I guess 250 would be the
ps aux | grep mplayer
I think it uses mplayer to play... don't quote me on it though, as I
don't use the plugin.
On 7/3/05, Phill Edwards [EMAIL PROTECTED] wrote:
I've found that Mythstream sometimes causes the whole frontend to
crash when playing a stream. I can't reliably reproduce the error
Hi Jonny
I'm not aware of it having been done yet, and have been browsing to see
if it had previously. There was reference to it on a thread that I'll be
damned if I can find now - basically someone was trying to compile it
and complaining about satisfying dependencies.
I thought it'd make a
Hello, just reading over a plethora of threads that contradict each
other. It seems that some people can play back HD content via XvMC
and get away with having a 1Ghz processor. Others claim that with a
much higher CPU, nearing 2Ghz, even with XvMC enabled they are max'd
out on their CPU and
Hi,
I am trying to conrol DirecTV tuner from MythTV (DirecTV Receiver D10).
I read:
If you have an external tuner, such as a DirecTV or digital cable
set top box, you should add |/usr/local/bin/changechannel| to your
Input Connections in the mythbackend configuration GUI. The
95 matches
Mail list logo