Henry Fleischmann wrote:
Anyone have suggestions for searching for children's movies with
Mythweb? I get some by searching for "children *" with Title and
Category boxes checked, but it seems like I'm missing a lot. Is the a
way to search for all G or PG rated movies?
Nope, but if you use mythf
Try changing your sources.list entries to:deb http://dijkstra.csh.rit.edu/~mdz/debian unstable mythtv.olddeb-src
http://dijkstra.csh.rit.edu/~mdz/debian unstable mythtv.oldThey haven't been removed, just moved.On 12/19/05, Tim Tait <
[EMAIL PROTECTED]> wrote:Tony Godshall wrote:> According to Mike
On Sunday 18 December 2005 09:02, Marty Ravell wrote:
> My questions therefore are :
>
>
>
> 1.Can I rip a DVD in such a way as to produce nuv files that the 350's
> hardware decoder can display?
>
>
>
> Any ideas?
>
>
>
>
>
> Regards
>
> Marty
I can't answer your question and I've only really
On Tue, 2005-12-20 at 00:09 -0500, Michael Haan wrote:
I know people are doing this, so it must be documentable. What are the steps for configuring a fresh install to tune qam? That is:
1) How do I find-out how to tune my channels?
2) How do I import this into myth?
3)
Michael Haan wrote:
I know people are doing this, so it must be documentable. What are the
steps for configuring a fresh install to tune qam? That is:
1) How do I find-out how to tune my channels?
2) How do I import this into myth?
3) What else?
Seems like there are a-lot of people doing thi
I found this article useful in getting the dvb modules to load and
setting up channels:
http://www.penlug.org/twiki/bin/view/Main/DigitalTelevisionDVB
Mark
On 12/19/05, Michael Haan <[EMAIL PROTECTED]> wrote:
> I know people are doing this, so it must be documentable. What are the
> steps for c
I know people are doing this, so it must be documentable. What are the steps for configuring a fresh install to tune qam? That is:1) How do I find-out how to tune my channels?2) How do I import this into myth?
3) What else?Seems like there are a-lot of people doing this, so I know the info is out
On Mon, 2005-12-19 at 21:40 -0500, Boleslaw Ciesielski wrote:
> Brandon Beattie wrote:
> > If you want to use IDCT hardware acceleration (Also known as XvMC
> > Hardware decoding), see the same setup->tv-settings->playback->page 1.
> Is IDCT really the same as XvMC? I thought IDCT (inverse discret
Anyone have suggestions for searching for children's movies with
Mythweb? I get some by searching for "children *" with Title and
Category boxes checked, but it seems like I'm missing a lot. Is the a
way to search for all G or PG rated movies?
--
Henry
Mark deJong wrote:
Date: Thu, 8 Dec 2005 16:26:24 +0100 (CET)
From: Franco <[EMAIL PROTECTED]>
Subject: [mythtv-users] STAY AWAY FROM WI-FI !!!
To: mythtv-users@mythtv.org
Message-ID: <[EMAIL PROTECTED]>
Content-Type: text/plain; charset=us-ascii
Hello,
Hello Audience. Meet troll. Obviously a
On Mon, 2005-12-19 at 19:44 -0800, Mark Johannessen wrote:
> On 12/19/05, Daniel Kristjansson <[EMAIL PROTECTED]> wrote:
> > The audio can often be addressed by turning on "Extra Audio buffering" in
> > the frontend settings, but sometimes requires the purchase of a new audio
> > card.
> I was afr
Tony Godshall wrote:
According to Mike Robinson,
I was considering using Debian (or Ubuntu) for my new Myth box, but then
I saw that the distribution isn't being supported anymore:
http://dijkstra.csh.rit.edu/~mdz/debian/dists/unstable/mythtv/README
Does this mean that I'm SOL for Myth on a
On 12/19/05, Brad Fuller <[EMAIL PROTECTED]> wrote:
Michael Haan wrote:
On 12/19/05, Brad Fuller
<[EMAIL PROTECTED]>
wrote:
Michael
Haan wrote:
> Trying to find-out how I discover and import the list of available
QAM
> channels for use with my HD3000, in my area. Can't seem to
hey folks, just set up a new myth box on a PII Celeron 400Mhz box with 512Megs
of memory.
mythtv ~ # uname -a
Linux mythtv 2.6.14-gentoo-r4 #3 PREEMPT Thu Dec 15 17:57:43 EST 2005 i686
Celeron (Mendocino) Genui
neIntel GNU/Linux
Ive got: mythtv-0.18.1-r1 and ivtv-0.4.0-r2 installed. The gui men
> And in response to Phill, it is easier in the channel editor, but tedious and
> slow. I just find knoda quicker for doing these kind of manual interventions.
You're right. After I sent that I realised that I forgot to mention
that I only have 7 channels!
_
Michael Haan wrote:
On 12/19/05, Brad Fuller
<[EMAIL PROTECTED]>
wrote:
Michael
Haan wrote:
> Trying to find-out how I discover and import the list of available
QAM
> channels for use with my HD3000, in my area. Can't seem to find a
> decent tutorial, or the necessary resources.
On 12/19/05, Daniel Kristjansson <[EMAIL PROTECTED]> wrote:
> The audio can often be addressed by turning on "Extra Audio buffering" in
> the frontend settings, but sometimes requires the purchase of a new audio
> card.
I was afraid that this might be a hardware problem. I've tried
turning on "
On Monday 19 December 2005 21:59, Tom Lichti wrote:
> Steve Adeff wrote:
> > On Monday 19 December 2005 20:31, Tom Lichti wrote:
> >> Steve Adeff wrote:
> >>> On Saturday 17 December 2005 07:08, Dag Nygren wrote:
> >> I've been running 8199 for a while now. When it says a recording
> >> wil
On 12/19/05, Brad Fuller <[EMAIL PROTECTED]> wrote:
Michael Haan wrote:> Trying to find-out how I discover and import the list of available QAM> channels for use with my HD3000, in my area. Can't seem to find a> decent tutorial, or the necessary resources.
There are recent emails about that here.
Michael Haan wrote:
Trying to find-out how I discover and import the list of available QAM
channels for use with my HD3000, in my area. Can't seem to find a
decent tutorial, or the necessary resources.
There are recent emails about that here. You can scan using mythtvsetup.
Make sure that m
Steve Adeff wrote:
On Monday 19 December 2005 20:31, Tom Lichti wrote:
Steve Adeff wrote:
On Saturday 17 December 2005 07:08, Dag Nygren wrote:
I've been running 8199 for a while now. When it says a recording will
start I have to make sure to exit to the menu, but I've been able
On Monday 19 December 2005 21:40, Boleslaw Ciesielski wrote:
> Brandon Beattie wrote:
> > If you want to use IDCT hardware acceleration (Also known as XvMC
> > Hardware decoding), see the same setup->tv-settings->playback->page 1.
>
> Is IDCT really the same as XvMC? I thought IDCT (inverse discret
On Monday 19 December 2005 20:31, Tom Lichti wrote:
> Steve Adeff wrote:
> > On Saturday 17 December 2005 07:08, Dag Nygren wrote:
> I've been running 8199 for a while now. When it says a recording will
> start I have to make sure to exit to the menu, but I've been able to
> watch li
Brandon Beattie wrote:
If you want to use IDCT hardware acceleration (Also known as XvMC
Hardware decoding), see the same setup->tv-settings->playback->page 1.
Is IDCT really the same as XvMC? I thought IDCT (inverse discrete cosine
transform) was part of the calculations in the MPEG2 decompre
Trying to find-out how I discover and import the list of available QAM channels for use with my HD3000, in my area. Can't seem to find a decent tutorial, or the necessary resources.
___
mythtv-users mailing list
mythtv-users@mythtv.org
http://mythtv.org/
On Monday 19 December 2005 21:16, Nick wrote:
> On 20/12/05, Steve Adeff <[EMAIL PROTECTED]> wrote:
> > On Monday 19 December 2005 19:04, Kevin Kuphal wrote:
> > > Steve Adeff wrote:
> > > >Is it possible to manually add videos the the Watch Recordings list?
> > > >I'd like to be able to add videos
On 20/12/05, Steve Adeff <[EMAIL PROTECTED]> wrote:
> On Monday 19 December 2005 19:04, Kevin Kuphal wrote:
> > Steve Adeff wrote:
> > >Is it possible to manually add videos the the Watch Recordings list?
> > >I'd like to be able to add videos I have on my HDD to this list instead of
> > >having to
Hello all. I am planning on building a brand new MythTV system. I considered
getting
Tivo but after reading about MythTV and seeing screenshots I was impressed. I
have read
quite a bit about the hardware that would go into a system like this but I am
still
unclear about certain things.
My setu
On 19/12/05, Daniel Stengel <[EMAIL PROTECTED]> wrote:
> Ok it probably is a rec. problem... The size has been 480x480 but
> recording in 720x576 does not change much (didnt see any change)
> but recording at a bitrate of 7500 (max. 1) did change a lot!
This bitrate seems a bit excessive to ge
On 19/12/05, Brad Karal <[EMAIL PROTECTED]> wrote:
> Permissions of the two device files are:
>
> crw-rw 1 root video 81, 0 Oct 30 20:10 video0
> crw-rw 1 root video 81, 1 Oct 30 20:10 video1
Both are identical, so nothing obvious here. I take it from your
earlier comments that you can
On Monday 19 December 2005 20:32, Alex wrote:
> On 12/19/05, Andy Leung <[EMAIL PROTECTED]> wrote:
> > Well that is starnge. This msg specifically stated
> > that 6600 no longer support xv hardware scaling:
> >
> > http://lists.debian.org/debian-user/2005/08/msg00205.html
> >
> > Anyone knows what'
On 19/12/05, Chris Trown <[EMAIL PROTECTED]> wrote:
> I put the modprobe command in the mythbackend startup script,
> which is icky. I believe that has fixed the problem, though I need a
> few more reboots to make sure.
>
> There has got to be a better way to do this. Anybody have any
On 19/12/05, Niels Dybdahl <[EMAIL PROTECTED]> wrote:
>
> > First make sure that the audio cable is firmly seated in the socket on
> > the back of the card
>
> I do not use any audio cable for recording. Antenna in - nothing out...
If using antenna feed, is the correct tuner being identified on iv
On 19/12/05, [EMAIL PROTECTED] <[EMAIL PROTECTED]> wrote:
> Hi,
>
> I've set up Mythtv on my bedroom pc. I use a AV sender to enable it to
> receive cable from my livingroom STB. All works ok. It can change channel
> via a blaster.
> I do have one problem though. Sometimes my provider will put a me
On 12/19/05, Andy Leung <[EMAIL PROTECTED]> wrote:
Well that is starnge. This msg specifically statedthat 6600 no longer support xv hardware scaling:
http://lists.debian.org/debian-user/2005/08/msg00205.htmlAnyone knows what's the real scope here?
That states the overlay has gone away. I do know
Steve Adeff wrote:
On Saturday 17 December 2005 07:08, Dag Nygren wrote:
I've been running 8199 for a while now. When it says a recording will
start I have to make sure to exit to the menu, but I've been able to
watch live TV for a while (and NEVER try to record something while in
LiveTV)...
On Monday 19 December 2005 19:04, Kevin Kuphal wrote:
> Steve Adeff wrote:
> >Is it possible to manually add videos the the Watch Recordings list?
> >I'd like to be able to add videos I have on my HDD to this list instead of
> >having to go through MythVideo since they're tv episodes anyway.
> >Is
On 19/12/05, Marius Schrecker <[EMAIL PROTECTED]> wrote:
>
> My current mixer settings (from alsamixer console mode) are:
>
> Master: 71%
> Master Mono: Mute
> PCM: 100%
> ...
> IEC958:PCM
> IEC958 Playback AC97-SPSA : 0%
> IEC958 Playback AC97-SPSA Capture : 0%
> Capture: 100%
> Mix: Capture set
>
On Monday 19 December 2005 20:18, Andy Leung wrote:
> Well that is starnge. This msg specifically stated
> that 6600 no longer support xv hardware scaling:
>
> http://lists.debian.org/debian-user/2005/08/msg00205.html
Where does that state that hardware scaling is not supported?
Isaac
___
Stephen Boddy wrote:
On Tuesday 20 December 2005 01:01, Brad Fuller wrote:
James Oltman wrote:
Forgive the stupidity, but how can I import those new icons into my
setup?
Can the icons be shown when changing channels? I have them in the EPG,
but I tho
On 12/19/05, Tom E. Craddock Jr. <[EMAIL PROTECTED]> wrote:
Michael Haan wrote:>> Hmmm...>> Ok, first, I'm nout sure I should be installing src, but maybe I> should. Here' what I got when I tried the above:>> [EMAIL PROTECTED] mythtv]# rpm -Uvh
> linuxtv-dvb-apps-1.1.0cvs20050306-1.rhfc4.at.src.rp
Well that is starnge. This msg specifically stated
that 6600 no longer support xv hardware scaling:
http://lists.debian.org/debian-user/2005/08/msg00205.html
Anyone knows what's the real scope here?
--- Stephen Boddy <[EMAIL PROTECTED]>
wrote:
> On Monday 19 December 2005 08:48, Andy Leung wrot
Michael Haan wrote:
Hmmm...
Ok, first, I'm nout sure I should be installing src, but maybe I
should. Here' what I got when I tried the above:
[EMAIL PROTECTED] mythtv]# rpm -Uvh
linuxtv-dvb-apps-1.1.0cvs20050306-1.rhfc4.at.src.rpm
1:linuxtv-dvb-apps ##
On Tuesday 20 December 2005 01:01, Brad Fuller wrote:
> James Oltman wrote:
> > Forgive the stupidity, but how can I import those new icons into my
> > setup?
>
> Can the icons be shown when changing channels? I have them in the EPG,
> but I thought that I also saw them in my older version of mytht
On Monday 19 December 2005 23:31, James Oltman wrote:
> I just looked through my DB and couldn't see any existing channel mappings.
> There was a table for what looked like icons, but there was no data in
> there for me to compare with.
In the "mythconverg" database, in the "channel" table, there
James Oltman wrote:
Forgive the stupidity, but how can I import those new icons into
my setup?
Can the icons be shown when changing channels? I have them in the EPG,
but I thought that I also saw them in my older version of mythtv while
changing channels.
-descriptive
Thanks to all that have made MythTV such a wonderful program! I've been
running a backend server with an Xbox frontend for almost a year, and
it's been working quite well doing analog time-shifted viewing of my
families' favorite programs. Kudos to all!
I'm just now getting around to posting
Hi Nick,
Thanks for your reply. Yes, I get normal audio on other apps. I can play
old videos in MythTV that I recorded with the PVR-250 and they play
fine. Are the any other modules that I need to load in the kernel
(codecs, etc)? The recordings I make with the pcHDTV-3000 board using
MythTV
> I noticed an issue this morning with the new date/time in the info
> display. Works with recordings, but displays the token for live tv.
> Not sure if there's a way around this, but wanted to mention it.
I'll take a look at that.
> Also, if you could add scrolling text to it by default, i
On 12/19/05, Phill Edwards <[EMAIL PROTECTED]> wrote:
> Ok, I'm a moron. I've downloaded this and I *think* installed it, but I'm> not sure where to find it. First, how do I install this package from> command-line? Where will I find this util once installed?
As root:# rpm -Uvh packagename.rpmTo
On 19/12/05, Miguel Rivera <[EMAIL PROTECTED]> wrote:
>
> Hi all,
>
> I installed my pcHDTV card for the first time after my PVR-250 died.
> Everything seems to be working except I get no audio? Is there anything
> I can do to debug this problem. Here is what I see in the /dev fs.
>
> [EMAIL PROTEC
On 19/12/05, Phill Edwards <[EMAIL PROTECTED]> wrote:
> > About 5-6 days ago (after updating SVN), ONLY 4 recordings are being
> > displayed on the Watch Recordings area. I have about a hundred or so
> > recordings. They show up fine under MythWEB but i can't watch them on the
> > frontend. I poked
On Mon, 2005-12-19 at 15:42 -0800, Mark Johannessen wrote:
> I have been able to install mythtv/mythweb sucessfully (after about a
> weekend of work) on the following box:
>
> Intel Celeron 2.66 gHz
> 768 ram
> Nvidia e-GeForce MX4000 AGP card
> Soundbalster audio card
> The system is hooked up t
On Dec 19, 2005, at 6:43 PM, Phill Edwards wrote:
Also, if you could add scrolling text to it by default, it would save
me the trouble of adding it in the event of upgrades. :)
0,434,640,40
0,440,640,40
settings
yes
-3,0
Out o
On Mon, Dec 19, 2005 at 03:42:11PM -0800, Mark Johannessen wrote:
> I seem to have met these requirements, yet I have a choppiness
> problem. From the spec sheet on the card I don't see IDCT mentioned,
> but it does mention "full OpenGL ICD" support.
>
> Does this look like a video card issue (ev
On Mon, Dec 19, 2005 at 03:42:11PM -0800, Mark Johannessen wrote:
> I have been able to install mythtv/mythweb sucessfully (after about a
> weekend of work) on the following box:
>
> Intel Celeron 2.66 gHz
> 768 ram
> Nvidia e-GeForce MX4000 AGP card
> Soundbalster audio card
> FC4
>
> The system
Steve Adeff wrote:
Is it possible to manually add videos the the Watch Recordings list?
I'd like to be able to add videos I have on my HDD to this list instead of
having to go through MythVideo since they're tv episodes anyway.
Is there an easy way to do this or do I just have to edit the db m
On Monday 19 December 2005 18:26, Stephen Boddy wrote:
> On Monday 19 December 2005 23:02, James Oltman wrote:
> > I wish I could do that! I am relatively to fully useless when it comes
> > to writing any kind of software. Given enough time, I am sure I could
> > READ some code, but write it, def
> I just looked through my DB and couldn't see any existing channel mappings.
> There was a table for what looked like icons, but there was no data in there
> for me to compare with.
Much easier to do it in the channel editor in mythtvsetup, I think.
___
> Also, if you could add scrolling text to it by default, it would save
> me the trouble of adding it in the event of upgrades. :)
>
>
>
>0,434,640,40
>
>
>0,440,640,40
>settings
>yes
>-3,0
>
>
Out of interest, does that mean
I have been able to install mythtv/mythweb sucessfully (after about a
weekend of work) on the following box:
Intel Celeron 2.66 gHz
768 ram
Nvidia e-GeForce MX4000 AGP card
Soundbalster audio card
FC4
The system is hooked up to an HD antenna and the signal is fine,
channels can be selected, audio
Hi Gabriel,
I had hoped someone else would follow up, as
I haven't seen your exact problem. I can only offer general advice,
but I hope it helps. I recently
got Myth running on a fresh Gentoo install (with a 500 card) without major
problems (Gentoo was more trouble than Myth was). If yo
On 19-Dec-05, at 11:57 AM, Helmut 'Kolbi' Kolb wrote:
Therefore i think, that these packages are compiled with sse enabled
which i don't have on my system here - as this is VIA EPIA Board with a
VIA Samuel 2 CPU.
I also had that problem on my ezra board but I forget when it surfaced.
Probably
I just looked through my DB and couldn't see any existing channel mappings. There was a table for what looked like icons, but there was no data in there for me to compare with.On 12/19/05,
Stephen Boddy <[EMAIL PROTECTED]> wrote:
On Monday 19 December 2005 23:02, James Oltman wrote:> I wish I cou
On Monday 19 December 2005 23:02, James Oltman wrote:
> I wish I could do that! I am relatively to fully useless when it comes to
> writing any kind of software. Given enough time, I am sure I could READ
> some code, but write it, definately not. Haha.
>
> Jim
It's OK, I was just pulling your l
On Monday 19 December 2005 08:48, Andy Leung wrote:
> Now I could go with a higher end Nvidia card. But I've
> also read that newer Nvidia cards have dropped support
> for Xvideo hardware scaling (do I need that?). Also
> I'd prefer to have a fanless card if at all possible.
> Any card you'd recomm
Is it possible to manually add videos the the Watch Recordings list?
I'd like to be able to add videos I have on my HDD to this list instead of
having to go through MythVideo since they're tv episodes anyway.
Is there an easy way to do this or do I just have to edit the db manually?
--
Thanks!
S
On Dec 19, 2005, at 9:52 AM, Greg Estabrooks wrote:
As usual, Great work, like I said before a great match for the
Grayhem theme,
thanks for all your hard work!
Thanks, actually it was fun to work on and learn more about how
myth handles
it's themes. I had rarely dug around that portion
On Mon, 2005-19-12 at 14:40 -0800, Chris Petersen wrote:
> > Thats not what the error said to me. It JUST said what I had sent in my
> > original post.
>
> Then like I said, perhaps you need to update your svn checkout.
>
> -Chris
Ok, I'm running 8111 to match my svn version that I'm running.
I wish I could do that! I am relatively to fully useless when it comes to writing any kind of software. Given enough time, I am sure I could READ some code, but write it, definately not. Haha.Jim
___
mythtv-users mailing list
mythtv-users@mythtv.org
ht
On Monday 19 December 2005 19:23, James Oltman wrote:
> Forgive the stupidity, but how can I import those new icons into my setup?
Save them locally, then use mythtv-setup to add the full path to the channels
configured.
Personally I find it easier to edit the entry in the db using something lik
Thats not what the error said to me. It JUST said what I had sent in my
original post.
Then like I said, perhaps you need to update your svn checkout.
-Chris
___
mythtv-users mailing list
mythtv-users@mythtv.org
http://mythtv.org/cgi-bin/mailman/list
Thanks, that's what I'm using, I have no idea why it's not working then.
Guess it's time to research IR Blasters.
On Mon, 19 Dec 2005, Deyan Bektchiev wrote:
> Straight through.
>
> It is sometimes called extension serial cable or CGA/EGA monitor
> extension cable and might be cheaper than the st
Straight through.
It is sometimes called extension serial cable or CGA/EGA monitor
extension cable and might be cheaper than the straight through (although
it's exactly the same cable).
Dejan
Chris wrote:
If anyone out there is successfully controlling a DCT2224 or DCT2524 via
serial, what
> And the error page itself says:
>
> The database environment variables are not correctly set in the
> included .htaccess file. Please read through the comments included
> in the file and set up the db_* environment variables correctly.
>
> Some possible solutions are to ma
Kevin Kuphal wrote:
Chris Petersen wrote:
Just a suggestion, but it would be better if that error message
directed people to the README or said something other than "Your db
variables are wrong" because, well, it may have nothing to do with
the db variables.
it directs you to the .htaccess
> Did you read the README and set up your httpd.conf AllowOverrides
> section properly?
>
> Kevin
>
Odd, my reading skills must be diminished because I didn't see that part
of the readme... Only saw the REALLY important part :) The
AllowOverride did the trick.
Thanks everyone for the help.
Chris Petersen wrote:
Just a suggestion, but it would be better if that error message
directed people to the README or said something other than "Your db
variables are wrong" because, well, it may have nothing to do with
the db variables.
it directs you to the .htaccess file, which as of 30
I just went through this. I hadn't update mythweb for a while.
The readme isn't completely clear to me either. Here's the section
your looking for in /etc/httpd/conf/httpd.conf
Remember to restart httpd after changing the conf file
# /etc/rc.d.init.d/httpd restart
#
# Possible values for
No, it doesn't say anything about mod_env or AllowOverride.
I will check on the AllowOverride option. I know the db vars are
correct because I left them as default and its running on the same
machine.
Does it work if I set those variables as OS environment variables in the
default profile?
Than
On Monday 19 December 2005 15:39, James Oltman wrote:
> He was saying he was having problems with xvidtune. Now whether that's
> because he is using component out I don't know. (Can't remember the
> previous post and too lazy to look). I have used PS in the past and it's
> been fine. I've never
On 12/19/05, Steve Adeff <[EMAIL PROTECTED]> wrote:
On Monday 19 December 2005 13:03, Jarod Wilson wrote:> On Monday 19 December 2005 05:01, [EMAIL PROTECTED] wrote:> > On Monday 19 December 2005 10:00, Joacim J wrote:
> > > I already have a file server with Open SUSE 10 and now I will have a> > >
Just a followup: Am I
totally lost? Or, is there a simple solution to this dire problem of mine?
TIA,
/Gabriel
From:
[EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Gabriel Schønau Hansen
Sent: 19. december 2005 03:07
To: 'Discussion
about mythtv'
Subject: [mythtv
I checked and didn't have it loading so I did apache-modconf apache
enable mod_env and that enabled it when I restarted the server.
Unfortunately I'm getting the same error.
Dunno what to say. You should only get that "db vars" error page if
server, database name or database password are bla
Just a suggestion, but it would be better if that error message directed
people to the README or said something other than "Your db variables are
wrong" because, well, it may have nothing to do with the db variables.
it directs you to the .htaccess file, which as of 30 seconds ago reminds
you
If anyone out there is successfully controlling a DCT2224 or DCT2524 via
serial, what kind of cable are you using? Straight through or null-modem?
Thanks,
-Chris
___
mythtv-users mailing list
mythtv-users@mythtv.org
http://mythtv.org/cgi-bin/mailman/list
He was saying he was having problems with xvidtune. Now whether that's because he is using component out I don't know. (Can't remember the previous post and too lazy to look). I have used PS in the past and it's been fine. I've never checked the
X.log for this info either. Definately worth tr
Thanks.
Will give it a shot tonite.
On 12/18/05, Dr. C Mythology <[EMAIL PROTECTED]> wrote:
Yup, try pressing the button 6.On 12/19/05, Valerian Mayega <
[EMAIL PROTECTED]> wrote:
Is there a way to switch between various visualizations while usingmythmusic wtih visualizations in full screen mode?
Chris Petersen wrote:
Mlists wrote:
Hi all,
This is probably a dumb problem but this is my first attempt to get
Mythweb working. Whenever I browse to the web page I get the
following error:
The database environment variables are not correctly set in the
included .htaccess file. Please re
> > thanks for the info Greg. I'lll wait for tonights release (with much
> > anticipation, I find it a good match for the Grayhem theme).
>
> Here it is, main changes are the new "small" program info which is
> only something that people running SVN would notice and I've adding in
> some editmode
http://arstechnica.com/news.ars/post/20051218-5797.html
"Analog hole" legislation introduced
12/18/2005 7:28:09 PM, by Eric Bangeman
A frightening bit of legislation was introduced to the US House Judiciary
Committee on Friday. The Digital Transition Content Security Act of 2005
(PDF) is spons
On Monday 19 December 2005 01:57, cardboil wrote:
> I have an external receiver for my digital cable connection. This receiver
> has a Composite Video out, which I have connected to the Composite Video in
> of my Hauppage Win TV PVR USB2.
>
> In mytthtv-setup, I set up a dummy video source called
jeff leads wrote:
Thanks for the reply Chris.
On my MBE (knoppmyth R5A26) the mythtv user and group
are uid/gid 105.
On my PC I created a mythtv user account and group and
made them 105 as well, added mythtv to the mythtv
group. I su'd to mythtv and from the mythtv home
directory I executed
On Monday 19 December 2005 13:24, Isaac Richards wrote:
> On Monday 19 December 2005 13:19, Bob Wiegand wrote:
> > Daniel Walton wrote:
> > > On Sat, 17 Dec 2005, Steve Adeff wrote:
> > >>I tried using the Program Finder today. I went to the first letter of
> > >> the program name and spent the nex
On Monday 19 December 2005 10:52, James Oltman wrote:
> > Any suggestions on how to make everything fit properly?
> >
> > Thanks,
> >
> > Jason
>
> You should check out PowerStrip. I remember seeing some guides online
> somewhere.
>
> Jim
no need, latest nvidia and ati drivers output the EDID inf
On Monday 19 December 2005 05:06, Adam Egger wrote:
> On 12/18/05, Steve Adeff <[EMAIL PROTECTED]> wrote:
> > Is it possible to get the LiveTV OSD position bar to be sized for the
> > length of the currently tuned show, then have the buffer fill level show
> > where in the shows time your currently
On Monday 19 December 2005 12:05, Chris Trown wrote:
> Kichigai Mentat wrote:
> > -BEGIN PGP SIGNED MESSAGE-
> > Hash: SHA1
> >
> > On Dec 18, 2005, at 16.00, Jeremiah Jester wrote:
> >> My goal in setting up a MythTv box is too capture true HD from my
> >> comcast digital recorder box and
Thanks for the reply Chris.
On my MBE (knoppmyth R5A26) the mythtv user and group
are uid/gid 105.
On my PC I created a mythtv user account and group and
made them 105 as well, added mythtv to the mythtv
group. I su'd to mythtv and from the mythtv home
directory I executed mythjobqueue. My re
Forgive the stupidity, but how can I import those new icons into my setup?
-descriptive URL really did this topic justice.http://www.lyngsat-logo.comMatt___mythtv-users mailing list
mythtv-users@mythtv.orghttp://mythtv.org/cgi-bin/mailman/listinfo/mythtv
Chris Petersen wrote:
Mlists wrote:
Hi all,
This is probably a dumb problem but this is my first attempt to get
Mythweb working. Whenever I browse to the web page I get the
following error:
The database environment variables are not correctly set in the
included .htaccess file. Please re
1 - 100 of 175 matches
Mail list logo
