Dear Sir,
Could please tell me the procedure how I can install the net-snmp package in to
my Linux system and my target board. Do I need to remove the exsting one or
not?.
Thanks in Advance,
-Maruthi
-
This SF.net email i
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] On
> Behalf Of Dave Shield
> Sent: Wednesday, January 30, 2008 7:59 AM
> On 30/01/2008, Buchupalli, Sasidevi
> <[EMAIL PROTECTED]> wrote:
> > So, per RFC, can I summarize:
> >
> > For SNMPv1, if the community string is incorrect, the agent
Ahh I see. I thought I had read differently. I'll just have to continue to
decode the integers in my handlers.
Thanks.
Larry Low
4150 N Drinkwater Blvd., 5th Floor
Scottsdale, AZ 85251
Office: 480.385.7045
E-mail: [EMAIL PROTECTED]'
Telesphere Networks, Inc
> -Original Message-
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] On
> Behalf Of yuchen lu
> Sent: Tuesday, January 29, 2008 6:56 PM
> "snmpbulkget -v2c -c amail 4.4.4.31 hrStorageIndex
> hrStorageType hrStorageDescr hrStorageSize hrStorageUsed"
>
> and the following is what bulkget returned, notice inde
On 30/01/2008, Bell, Adam <[EMAIL PROTECTED]> wrote:
> a) the output into snmpd.conf is from net-snmp-config, it looks the same
> as it did for 5.2.3. net-snmp-config reports v5.2.4
"Looks the same" is a dangerous assumption.
I suggested copying the file to another system, in case a
non-printing
Here it is
host/hr_system
mibII/system_mib
util_funcs
mibII/vacm_conf
mibII/vacm_context
mibII/vacm_vars
snmpv3/usmConf
snmpv3/usmStats
snmpv3/usmUser
snmpv3/snmpEngine
utilities/override
utilities/execute
Thanks,
Adam
-Original Message-
From: Thomas Anders [mailto:[EMAIL PROTECTED]
Se
I appreciate your attention on this.
a) the output into snmpd.conf is from net-snmp-config, it looks the same
as it did for 5.2.3. net-snmp-config reports v5.2.4
b) I'll try your suggestions but I do not link in the UCD mibs, I posted
the net-snmp-config output to Thomas, here it is
host/hr_syste
Thanks very much for the answers.
Wes Hardaker escribió:
>> "AG" == Antonio Grassi <[EMAIL PROTECTED]> writes:
>>
> AG> - First of all, can snmp notifications be sent over TCP instead of UDP?
>
> Yes.
>
> AG> - snmpinform talks with snmpd in order to deliver the notification.
> "CA" == Carey Auguste <[EMAIL PROTECTED]> writes:
CA> I've been reading the document trying to find the installation instruction
CA> for net-snmp 5.4.1. But couldn't find it.
CA> Could u please email me the instruction
http://www.net-snmp.org/docs/INSTALL.html
--
Wes Hardaker
Sparta, In
> "MA" == Mike Ayers <[EMAIL PROTECTED]> writes:
MA> You put "-Le" in your snmpd.conf file?
Sigh... Read the problem too quickly.
no.
Please submit a patch to make snmpd.conf parsing (snmp.conf actually)
handle logging options. Thanks!
--
Wes Hardaker
Sparta, Inc.
--
> "AG" == Antonio Grassi <[EMAIL PROTECTED]> writes:
AG> - First of all, can snmp notifications be sent over TCP instead of UDP?
Yes.
AG> - snmpinform talks with snmpd in order to deliver the notification. I've
AG> seen that snmpd has a buffer of commands to process. Does snmpinform
AG> exi
On 30/01/2008, Buchupalli, Sasidevi <[EMAIL PROTECTED]> wrote:
> So, per RFC, can I summarize:
>
> For SNMPv1, if the community string is incorrect, the agent should send
> an authenticationFailure Trap.
> For SNMPv2c, if the community string is incorrect, the agent should send
> an authenticationF
So, per RFC, can I summarize:
For SNMPv1, if the community string is incorrect, the agent should send
an authenticationFailure Trap.
For SNMPv2c, if the community string is incorrect, the agent should send
an authenticationFailure Trap.
For SNMPv3, if the auth/priv passphrases are incorrect or if
On 30/01/2008, Bell, Adam <[EMAIL PROTECTED]> wrote:
> I still see /var/net-snmp/snmpd.conf: Line 34:
> Warning: Unknown token: createUser
>
> What else should I be looking at?
Two basic possibilities spring to mind:
a) There's a typo or similar in the snmpd.conf file
b) There's som
Bell, Adam wrote:
> I also include mibII/vacm_conf,mibII/vacm_context,mibII/vacm_vars in the
> configure script.
> I also included
> snmpv3/usmConf,snmpv3/usmStats,snmpv3/usmUser,snmpv3/snmpEngine
>
> I have verified the vacm code has been compiled and included in the
> snmpd build.
>
> I still s
Dave,
The creatuser was just a typo here
/var/net-snmp/snmpd.log contains the line: createUser SHAAESUser SHA
"shapassword" AES aespassword
/usr/local/share/snmp/snmpd.conf contains the line: rwuser SHAAESUser
I also include mibII/vacm_conf,mibII/vacm_context,mibII/vacm_vars in the
configure s
On 28/01/2008, Jordi Moles Blanco <[EMAIL PROTECTED]> wrote:
> I would like to do some thing as easy as this:
> in my snmpd.conf
> pass.1.2.3.4.5.6.7.8.9.10 /root/myperl.pl
> then in this myperl.pl
> something as simple as.
> echo "77";
> and finally from the computer that gets all the
On 28/01/2008, Manfred Wassmann <[EMAIL PROTECTED]> wrote:
> The current design is that there is one OID where I can query the current
> version of a device and a second OID where I can set a Version to be
> updated.
something like:
versionCurrent OBJECT-TYPE
MAX-ACCESS read-onl
On 28/01/2008, Larry Low <[EMAIL PROTECTED]> wrote:
> Here is the capture from an event. As you can see the issue. IpAddress is
> by definition formatted as an unsigned integer but snmptrapd is detecting it
> as a signed integer.
Actually, assuming that these MIB objects are defined using the
sy
On 28/01/2008, Mike Ayers <[EMAIL PROTECTED]> wrote:
> what does the agent do with MIB files anyway? Disman?
Close.
The agent only needs MIB files if you are going to be referring to
MIB objects by name in the snmpd.conf file.
The DisMan support does not inherently require MIB files,
since i
On 25/01/2008, Karthick Babu <[EMAIL PROTECTED]> wrote:
> RFC 3414, section 3.2 (Processing an Incoming SNMP Message),
> point no. 6 says as follows :
> If the authentication module returns failure, then ...
> . an error indication (authenticationFailure)
> together with the OID and value
Hi,
I have a table which has been defined & created in the following way.
Table initialization code snippet is as given below
table_set = netsnmp_create_table_data_set("myStatsTable");
table_set->allow_creation = 1;
netsnmp_table_set_add_indexes(table_set, ASN_INTEGER, 0);
n
On 25/01/2008, Mike Ayers <[EMAIL PROTECTED]> wrote:
> > We want to support duplicate attribute name in different
> > table with different OID.
>
> You can have the same relative name for a column (attribute)
> in two different tables.
Just as long as the two tables are defined in different
On 29/01/2008, Bell, Adam <[EMAIL PROTECTED]> wrote:
> The second part of this problem relates to the USM user creation. My
> users were all erased upon running 5.2.4 the first time.
Presumably because the agent didn't include the vacm_conf module
at that point. (Since it's this module that wou
That fixed up the vacm token errors - Thanks.
The second part of this problem relates to the USM user creation. My
users were all erased upon running 5.2.4 the first time.
I ran net-snmp-config --create-snmpv3-user -A SHA -a password -X AES -x
password SHAAESUser.
That put the proper line in /v
25 matches
Mail list logo
