Hi,
I am using version 5.0.9. I am trying to extend the agent
in the style given in the mibgroup/examples/example.c file.
I have the following problem
Any help will be appreciated
Thanks
I am only adding simple integer/string.
Things work fine if i use variable2 as in
struct variable2
Would you please put my name in the mailing list. Thanks.
Dan
-
This mail sent through IMP: http://horde.org/imp/
---
This SF.Net email is sponsored by:
Sybase ASE Linux Express Edition - downl
Hi,
I am Swetha…. I am new to Net-SNMP. I am
using Net-snmp v 5.2.1.2 in Linux. When I was trying to compile the default
mibs to get the skeleton code using the mib2c I am getting the following error…..
ERROR: You don't have the SNMP perl module installed.
Please o
http://www.vitalmind.net/sasnomsvkplil.php
--
AlienVault Unified Security Management (USM) platform delivers complete
security visibility with the essential security capabilities
http://maestrocreativo.com/nhnrvm/lsgnk/udwtesx/irr/vwrqb.gdih--
This SF.net email is sponsored by Windows:
Build for Windows Store.
http://p.sf.net/sfu/windows-dev2dev___
Net-s
Hi,
This is Sumalatha… I am new to this SNMP. Can anybody
help me out in registering the .c file generated by the mib module with the
snmp agent.
Thanks & Regards,
Sumalatha
DISCLAIMER:This email (including any attachments) is intended for the sole use of the inte
Hi,
I am Sumalatha. I am trying to send my own
messages to the agent through the notification.c file present in the
agent/mibgroup/examples directory of the net-snmp-5.2 version. But when I configure
the file with
./configure –with-mib-modules=”examples/notification
> {LABCALLSINDEX,ASN_INTEGER, RONLY, var_example, 2, {18,1,1}}
That line is wrong.
You've got 3 subidentifiers in the list,
so the length must be declared as 3
Try
{LABCALLSINDEX,ASN_INTEGER, RONLY, var_example, 3, {18,1,1}}
Dave
---
On Wed, 8 Sep 2004, Sitaraman .V.R wrote:
Hi,
I apologise, that was a cut and paste mistake. When i actually ran
it, it WAS 3.
Therefore, it appears in certain situations when i have
a struct Variable3 I run into a problem.
I made a couple more observations, I am attaching them. Let me
> Code:
> struct variable3 example_variables[] = {
> {EXAMPLESTRING, ASN_OCTET_STR, RONLY, var_example, 1, {1}},
> {EXAMPLETIMETICKS,ASN_TIMETICKS, RONLY, var_example, 1, {2}},
> {EXAMPLEIPADDRESS,ASN_IPADDRESS, RONLY, var_example, 1, {3}},
> {EXAMPLECOUNTER, AS
Hi Dave,
While the below works(case1), it appears even with increasing OID listing
there are cases where the agent does not start. Case4, Case5 and Case6.
Sitaraman
> Try moving the 'LABCALLSINDEX' entry to immediately after the
> 'EXAMPLETIMETICKS' entry.
>
> (Th
I guess you have installed the NetSNMP libraries and binaries under
/usr/local (the default case).
Set LD_LIBRARY_PATH=/usr/local/lib in your shell environment and then
try running mib2c.
Anand
Sumalatha_Nadella wrote:
Hi,
I am Swetha…. I am new to Net-SNMP. I am using Net-snmp v 5.2.1.2
Hi! I am news in the domain of SNMP. I have beginning to understand how
that works i want to make a simple program to read and change integer value
from a computer to a target but i am a little lost. For the moment i try to
read a value on my localhost and display it.
I think i have understand
On Tue, 20 Sep 2005 14:23:36 +0530 Sumalatha_Nadella wrote:
S> I am Swetha I am new to Net-SNMP. I am using Net-snmp v
S> 5.2.1.2 in Linux.
Did you install a package, or build from source? If package, then otehn the
perl modules are separate and must also be installed. If source, y
On Tue, 2005-10-18 at 15:33 +0530, Sumalatha_Nadella wrote:
> Can anybody help me out in registering the .c file generated
> by the mib module with the snmp agent.
Put the C file (and accompanying header file) into the source
tree somewhere under 'agent/mibgroup', and run "configure" with
the o
On Tue, 2005-10-25 at 11:10 +0530, Sumalatha_Nadella wrote:
> But when I configure the file with
> ./configure –with-mib-modules=”examples/notification” ,
> I am getting errors.
Such as?
> Can anyone please help me out in doing the needed so that I can send
> my own messages to the agent
When I start snmpd it reports the following error:
: line 20: Error: unknown payload OID
And line 20 is:
defaultMonitors yes
Here is my snmpd.conf:
#System Information
syslocation lpsII
syscontact netadmin
authtrapenable 1
#Trap Destinations
trapcommunity public
informsink localhost p
hi Dear,
in the UCD-snmp extending agent , i have the function write_Name(int action, u_char *var_val, u_char var_val_type, size_t var_val_len, u_char *statP, oid *name, size_t name_len):
the second, third and fourth parameters provide information about the new desired
Hi,
I am new to net-snmp (and snmp) so struggling a bit here.
I am successfully talking to an SNMP device and getting back some variables
which I can print out using the following code:
init_snmp etc
then
sess_handle = snmp_open(&session);
pdu = snmp_pdu_create(SNMP_MSG
I don't know why below error happen
help..
-bash-3.00# snmpd -r -f -L -C --rocommunity="private
127.0.0.1" udp:1161error on subcontainer '' insert (-1)error on
subcontainer '' insert (-1)error on subcontainer '' insert (-1)error on
subcontainer '' insert (-1)error on subcontain
On 18/07/06, Elias Bou Rahal <[EMAIL PROTECTED]> wrote:
>
> hi Dear,
>
>
>in the UCD-snmp extending agent , i have the function write_Name(int
> action, u_char *var_val, u_char var_val_type, size_t var_val_len,
> u_char *statP, oid *name, size_t name_l
Hi,
plZ help in this ..
i want some example codes for
How to get the snmp table data.
How to receive the notification from different agents.
Thanks in advance.
Thanks&Regards,
이정훈 wrote:
> -bash-3.00# snmpd -r -f -L -C --rocommunity="private 127.0.0.1" udp:1161
> error on subcontainer '' insert (-1)
[...]
> error on subcontainer '' insert (-1)
> Segmentation fault
What net-snmp version are you running? On what platform? What's the
output of "net-snmp-config --configure-
How are you, I cannot English well. It is sorry.
In this time I NET-SNMP installed in solaris 5.9.
When it runs the "MAKE" but after the "./CONFIGURE", the error occurs.
The error message with afterwords is same.
:
On Mon, 25 Jul 2005 18:00:04 +0530 Ravikumar wrote:
R> i want some example codes for
R> How to get the snmp table data.
See the source for snmpget and/or snmptable.
R> How to receive the notification from different agents.
See the source for snmptra
Hi :)
I try to install net-snmp on my target, an embedded linux with arago. My
problem is when i run the ./configure commande, after to answer to the
default questions i have this error message :
configure: error: file program not found although it is needed
by libtool.
What is the
Is it possible to locate and read MIB file on a particular system. If code is
in java, that would help more
Thanks and Regards,
Deepika miracle
ECSIVS
[Description: Description: visit us :
www.forangelsonly.org]
CAUTION - Dis
> In this time I NET-SNMP installed in solaris 5.9.
Have you read README.solaris? Particularly section 3, compiling net-snmp?
--
NOTE: messages sent directly to me, instead of the lists, will be deleted
unless they are requests for paid consulting services.
Robert Story; NET-SNMP Junkie
S
Hi :)
I am a beginner in snmp management. I try to make a simple connection
between two computer (ubuntu) thanks to an ethernet communication
(cross-wire). I would like to know how i have to configure the superviser
and the receiver of the command.
I try to follow all the existing link but when i
Hi Robert,
Im using Net-SNMP 5.1.2. My requirement is to write a simple piece
of code send traps from my application. For e.g. If my process is
running somewhere, I have send the traps with respect to the
performance of that process.
So please tell me what all the steps I have to follow make
On Fri, Apr 20, 2012 at 02:53:20PM +0200, Geoffrey Fournier wrote:
> Hi :)
> I am a beginner in snmp management. I try to make a simple connection
> between two computer (ubuntu) thanks to an ethernet communication
> (cross-wire). I would like to know how i have to configure the supe
hi,all.
i want to add the new mib lib in net-snmp.
i got some file from
http://net-snmp.sourceforge.net/tutorial-5/toolkit/dlmod/
as example.
the following is my commands:
1.make nstAgentPluginObject.so
2.cp nstAgentPluginObject.so /usr/lib/
3.cp NET-SNMP-TUTORIAL-MIB.txt /usr/local/share/snmp
On Thu, 24 Feb 2005 01:45:19 -0800 Chenna wrote:
C> I could send the traps usgin "snmptrap" command. But my requirement
C> is to use the api. like snmp_easy_trap...like that.
C>
C>I tried to use the mib2c to generate the stubs. But it asked to
C> load the PERL module. I got some info for doi
Hi
I need the documentation details for snmptrapd section in net-snmp 5.1 . i
need the usage details for snmptrapd . please send the same.
Regards
Krishna
---
This SF.Net email is sponsored by xPML, a groundbreaking scripting language
> On Sat, 04 Mar 2006 15:15:06 +0600 (IST), [EMAIL PROTECTED] said:
krishnakumar> I need the documentation details for snmptrapd section
krishnakumar> in net-snmp 5.1 . i need the usage details for snmptrapd
krishnakumar> . please send the same.
Please read the snmptrapd and snmptrapd.conf ma
Hi,
I develop some componets on net-snmp, It works OK on AIX. when I test
it on HP-Unix, a strange thing occured. no matter where I send a request
to the snmpd, the snmpd print the sender's IP and port always 0.0.0.0:0.
How can I solve it? thanks!
Received SNMP packet(s) fro
36 matches
Mail list logo