hello world
I've just installed Mandrake 5.3 on a Pentium II 266 machine, and I'm
relatively unexperienced; everything seems to work well, but I can't get
printer and sound card work at all; the printer is a HP Laserjet 4L
connected to LPT1 (there is also a parallel ZIP, but I've disconnected it
Meanie [EMAIL PROTECTED] scritto:
Gilbert Espinosa wrote:
Jason Cotterell wrote:
I have used modemtool to set cua0 to use,
I've tried adjusting the volume settings in modem commands from
Kppp
I've setserial to configure the ports
all that happens though is the modem will be
Date: Tue, 4 May 1999 06:07:15 -0700 (PDT)
From: Roberto Angelo [EMAIL PROTECTED]
Subject: Re: "Flaky" video modes WAS: [newbie] Video Modes
Hi, All Roberto!
Arnold Kelly [EMAIL PROTECTED] scritto:
I've just built a new system
...
The video is SiS 6326 3D Pro AGP and the monitor is a
Hi:
I want to kill the daemon of inetd avoid rebooting. I use command "ps
aus" ,but inetd isnt listed. Why ? How to rerun the daemon after kill it?
Thanks!
John l.yn
Hi:
I dont know which file include the information. I have tired many *.conf.
I want to run one program at boot.
Thanks!
John l.yn
Hi:
I have added a user named "lyn" as group of root. But the command of
"shutdown" cannt be used by "lyn". How to assign the right of root to "lyn".
Thanks!
John l.yn
Cristiano Baldoin [EMAIL PROTECTED] scritto:
hello world
I've just installed Mandrake 5.3 on a Pentium II 266 machine, and I'm
relatively unexperienced; everything seems to work well, but I can't
get
printer and sound card work at all; the printer is a HP Laserjet 4L
connected to LPT1
The sound card is a common Sound Blaster 16 compatible.
I also tried to upgrade to kernel 2.2.5, without results.
Someone can tell me how to solve these problems?
If you have Windows 95 on your machine, just go to Control Panel /
System / Device Manager / Sound, Video, and Game Controllers
If you want user lyn to have temporary root access, simply type su at
the command prompt, then enter the root password.
--
Meanie
At 05:49 06/05/99 -0500, you wrote:
Com 1 : Mouse = Com 4 : Modem
Com 2 : Mouse = Com 3 : Modem
This is because most PC's are only allowed 2 serial ports. Usually,
Internal Modems have a Com 4 setting which means you have to set it to
cua3, External Modems have Com 3
Hey all.. thanks a ton for all the help thus far. I don't know much,
but I try to help out when I can. My new problem regards my Realtek 8029
(NE2k compatible) PCI LAN card. I was pretty sure I had it set up right
upon installation (never had a chance to test it out), but after I
_finally_ got
Hi,
I've some problems and in order of importance I expose you, if there
is somewhere, someone that can help my in something. :-))
I've Mandrake 5.3 with 2.2.5 kernel upgraded.
--- scanner ---
I have a problem with my scanner an Artec ViewScan A6000C plus SCSI
with DTC 3151/3181
John l.yn [EMAIL PROTECTED]] said:
I want to kill the daemon of inetd avoid rebooting. I use command
"ps aus" ,but inetd isnt listed. Why ? How to rerun the daemon after
kill it?
Try:ps -A
Then: kill -9 pid
Regards,
Richard
Tom A.H. Piel [EMAIL PROTECTED]] said:
I'm having some problems with my NE2000 plus
isa card which is not detected during installation
and my soundcard is not working (also not detected)
during install it asked me for autoprobe or specific
and both failed (can't detect device anywhere on the
Vladimir V. Popov [[EMAIL PROTECTED]] said:
I tested all Options recom. from README.SIS but it don't helps
me. In Win98/NT my SiS6326 works properly. Need to wait for
new X*_SVGA rel.
Try running XF86Setup (the XFree86 utility), instead of XConfigurator (the
Red Hat utility).
It is more
Arnold Kelly [EMAIL PROTECTED] scritto:
yes please.
Arnold
From: [EMAIL PROTECTED] (Budhi Setiaji)
Reply-To: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Subject: [newbie] SiS Driver
Date: Wed, 5 May 1999 23:38:49 +0700
Would you like to give me an information about SiS 6326 AGP driver.
I have installed a mandrake 5.3, updated with kernel 2.2.5 and
recompiled succesfully. As I am a linux newbie, I installed on a 1.6Gb
WD Caviar hd mounted on a removable frame. I have a identical hd mounted
on a second frame. My goal is to copy the installation as is on the
second hd, just to
At 04:16 PM 5/6/99 +0800, you wrote:
Hi:
I have added a user named "lyn" as group of root. But the command of
"shutdown" cannt be used by "lyn". How to assign the right of root to "lyn".
I accomplished that feat issuing the "chmod u+s /sbin/shutdown"
Now my regular user as well as root can
Date: Thu, 6 May 1999 02:03:46 -0700 (PDT)
From: Roberto Angelo [EMAIL PROTECTED]
...
"John l.yn" [EMAIL PROTECTED] scritto:
Hi:
I have added a user named "lyn" as group of root. But the command
of
"shutdown" cannt be used by "lyn". How to assign the right of root
to "lyn".
Look at man 8
I installed an internal zip drive (ATAPI). I can use only a preformated
zip. Other zip disks I use give me the message I can't read superblock
or I have to specify the file system (depending what i did on the fstab
i guess)
How do i edit the fstab? do i have to do anything else?
Also, the
On Thu, May 06, 1999 at 06:18:21AM -0500, Meanie wrote:
Hey all.. thanks a ton for all the help thus far. I don't know much,
but I try to help out when I can. My new problem regards my Realtek 8029
(NE2k compatible) PCI LAN card. I was pretty sure I had it set up right
upon installation
On Thu, May 06, 1999 at 03:44:20PM +0800, John l.yn wrote:
Hi:
I dont know which file include the information. I have tired many *.conf.
I want to run one program at boot.
/etc/rc.d/rc.local
--
Steve Philp
[EMAIL PROTECTED]
You can mount the second hard drive in your Linux and then perform
something like an Hard Disk upgrade. So all the Linux system gona be
copied on your second one. Take a look in Hard Disk Upgrade Howto to
perform the copy. Hope that help. Take a look at this link.
I set the option for "no_accel". That seems to have fixed the problem.
Thanks again!! :)
Arnold
Hi Arnold,
May I suggest you try the following that has been sent to me sometime
ago ( courtesy of Mauro Tortonesi).
" I used to have a SiS card. Usually SiS cards need the following
line in
Is there any web page that teaches how to install Linux (best if it is
Linux Mandrake 5.2)? Or is there any very cheap book (i'm almost broke)
on that?
25 matches
Mail list logo