salve vorrei iscrivermi, mi mandate un link per farlo?
grazie.
spero ci sia una sorta di moderatore cosi' non tutti devono sorbirsi 'sta
mail.
--
=
grande è la confusione sotto
il cielo: la situazione è perfetta
=
Not enough information.
Your explanation is a little terse.
Have you enabled routing?
Have you set up Masq?
What are the IP's involved and all pertinent data.
What lines did you add for Masq?
Did you read the Masq howto?
Did you understand it heh... I'm being facetious...
(hey it IS
I have not tried these programs, but I have used the GLMesa demos.
The TNT2 rocks with XFREE4.0.
Then ants in Moebius RUN around the moebius strip.
They used to walk when I had a Voodoo2.
All the GL screensavers and demo programs work fine.
I merely performed a clean expert install,
Hello forum!
I need to know if I can setup my X server to solve this problem.
This remebers a screen saver. Maybe the driver is not the last version.
To return to the system I must press CTRL, or any key, and the graphic
screen comes well again.
Warning : My driver is a MACH64.
Do you know if
I'm struggling to find a Doc(s) on what/how is needed to get the new
Nvidia drivers going for my TNT2. I did an expert Mandrake 7.1 install
and picked Yes to have Xfree86 4.0 installed. Do I just DL the new
drivers from Nvidia and follow their install instructions? Do I need a
kernel upgrade
Is there a site with a good how to so I can set up Mandrake 7.0 to connect on
the net with a cable modem
--
Windoze is a virus with a user interface.
This message was created with Linux
Take it back and get an ISA or external modem
Linux does NOT like PCI modems.
On Sun, 18 Jun 2000, also
sprach: Hi folks...
Does anyone know how to make a Motorola PCI modem work ?
I know that linux does not handle PCI very well yet, but is there a way to
make it work ?
Thanks for
Hi Chris and Mike:
Yes, the zip disk was in the drive.
Thanks for the info Chris, I'll try it when I get my other software working
with Linux.
edison
From: "Mike Tracy Holt" [EMAIL PROTECTED]
Reply-To: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Subject: Re: [newbie] ZIP drive
Date: Sat, 17 Jun
i think it did why not repost incase?
- Original Message -
From: "Mark Weaver" [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Sunday, June 18, 2000 10:30 PM
Subject: [newbie] firewall???
| Earlier this weekend I had asked if anyone had any ideas about a firewall
| problem I was having. I
Have you tried to connect using Kmail to check if the mail server is down?
Seve
-Original Message-
From: Mark Weaver [EMAIL PROTECTED]
To: [EMAIL PROTECTED] [EMAIL PROTECTED]
Date: Monday, June 19, 2000 4:29 AM
Subject: [newbie] trouble with Star Office
Hi all,
I was wondering if
Heh...
In an Xterm type the following...
xset s off
Does this fix the problem?
-JMS
|-Original Message-
|From: cavall_fort [mailto:[EMAIL PROTECTED]]
|Sent: Monday, June 19, 2000 1:59 AM
|To: [EMAIL PROTECTED]
|Subject: [newbie] The screen comes in black every minute [LM7.0-2].
|
|
Greg
On the KDE bar near the lower righthand corner of the screen you should
see a small button indicating which lang. you are using. My is english so it
the button is en. Click the the button and you can change your settings to
any other lang. mod. that you installed.
Charles
-
:~Hi Dr Caracciolo! The Reiser Filesystem handles improper system shutdowns
:~far better than does the (current) standard Ext2 filesystem.The improper
:~shutdowns, which of course can be caused by a myrid of things like power
:~outages or inexperienced Linux users' response to a crashed
Hi,
If I am not wrong, the rc.d directory and its subfolders
are used during initializing (startup) and terminating (shutdown)
of the Linux system.
The book "Running Linux" has a small section on this.
Cheers,
Viboon
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL
Ah, fine - so I do not have to vorry about it :-))
:~I got at least that many and sent them all back as attachments to the
:~postmaster that sent it.
:~
:~I guess they figured out there problem.
:~
:~I never received another one.
:~
:~Bambi
:~
--
:~ Never in five years have I had a mail lost this long..the US
:~postal service is faster than E-mail? I did not want to send the whole
:~reject to the list, but in the header was addresses of daemon in the
:~UK...the MDK machine is in the UK? I thought France.
Nope. our mail server is in
Hello-
Here's my problem. I have Windows 2000 installed on my first hard drive and Mandrake
7 on my second hard drive. The first time I boot into Windows after I installed
Linux, every time afterwards I can no longer access Linux. It boots up to the
"Checking File System" and it freezes.
How do I change a file from read-only to read-write?
Victor
Hi
If you find a solution for this problem, mail me, because I'm having the
same situation.
Thanks
Arnaldo
- Original Message -
From: [EMAIL PROTECTED]
To: Mandrake Newbie List [EMAIL PROTECTED]
Sent: Monday, June 19, 2000 1:35 PM
Subject: [newbie] Newsgroup for mailing lists
Hi,
Is
:~I am unable to complete the Linux Mandrake 7.1 installation.
:~When I reach the X Configuration I am prompted that the RPM package "xfree- " can't
:be found.
:~I have tried both Automated and Customized installation with the same result.
:~Installing all the XFree packages did not help.
I tried to solve the problem I have with users accessing their screen
saver settings again. I reloaded any RPM that seemed related to the
problem and that didn't work. I checked file permissions too, and
nothing seemed out of sorts.
Then it occured to me that I could just su root, and change the
I use everybuddy works well with AIM, Yahoo, and MSN. It's supposed to work
well with icq as well but I don't have an ICQ number...kinda cool all the
messangers wrapped in one package...I use it daily You can find it on
TuCows
Jim
- Original Message -
From: "Fran Parker" [EMAIL
I have seen this error quite a bit on the news groups,
with no real answer. I am attempting to install
Mandrake Linux 7.1 via FTP install. I am using the
ftp.eecs.umich.edu mirror to install. After the
install states it is checking to see which packages
are available, I get this error
Ottavia
Since the install ISO is 649MB you should not try to burn it on a 650MB
blank. Pony and several others make 700MB CD-Rs but be sure you do not pick
up an audio only CD-R.
NERO trys to make it hard to record from an ISO. There is no info in the
manual or on their web site. Here is
:~ distros, If it says version 2.0 somewhere on the card in white
:~lettering
:~ then it requires the latest tulip driver which you may have to compile
:~ yourself. Did have that working in that way but it is no longer in a
:~box
:~ right now. RRP
And we absolutely need the output of lspcidrake!
un-subscribe
Have you set up a pop3 daemon?
-David Talbot
At 08:45 AM 6/13/00 -0700, you wrote:
Hello everyone
i am new to the list my name is Luc
the problem i have is:
i have installed mandrake 7.0 (love it) very easy to
do anywho i made a account then i went on a win pc and
setup the email account well
Depends on the vendor of the tablet... for example, Wacom tablets from the
Artpad(I-2) all the way up to the Intuos are supported.
-David Talbot
At 01:59 PM 6/13/00 -0700, you wrote:
Some time ago I was looking for drivers for my Tablet. I wanted to use
Linux on my system at work.
Well no one
Hey folks.
I have a little problem, I don't know how to solve.
I have my daughter and I as users om my linux-box, so that we can have
our own desktop, mail-setup and so on. Mine works (mostly) OK, but when
she tries to start Netscape, she gets an: Bus error! why?
How can I change anything in
Hi
In short, we have some workarounds, but we need a lot of people to test
this workarounds, berfore finaly announcing "Yes, we got it!".
More details on http://linuxpole.com/ ;-
Other topics:
* Mandrake 7.1: 2 Steps forward .. 4 steps back ?:-o
* Do you like this forum?
* Software for my
go to www.linuxnewbie.org. AvatarX wrote an excellent NHF on
how to get the nivida drivers working in mandrake.
Scott Tyson wrote:
I'm struggling to find a Doc(s) on what/how is needed to get the new
Nvidia drivers going for my TNT2. I did an expert Mandrake 7.1 install
and picked Yes to
Hi everyone,
As a convenience to this list, I will burn MDK 7.1 onto two CD's at a cost
of $6.50 for my time, my CD-R media, and shipping costs.
If interested, just send me an E-mail requesting my mailing address.
I'm not trying to make a fortune or get rich. It seems like a waste to
Please log me out
I don't want to be on your mailing
list
It's too dificult for
me.
Thanks
1) I have a 500 mhz processor but Linux shows it running at 475, should I
worry?
2) I have one of those built in sound cards, with C-Media Electronics
chips-ICM18738 which sndconfig found and set up but it seems that the window
managers keep crashing the darn thing. The CD player works great but
Hi folks...
Looking for some info about my modem, it turned up to be designed for
windows...
So, I am thinking about getting another one...
Which modem would be the one that satifies my needs, do you guys have any
sugestion...
I plan to use both windows and linux on a dial-up conection, on a
THAT'S the error I've been getting too... but I downloaded all the files
from an FTP site. I have linux installed, but it was a pain! Also... when
your trying to use the partioning I was having problems getting it to work
correctly. I had to reformat placing the swap file first, then the other
Hello,
I'm using Linux Mandrake for a year now, and followed the new releases.
Recently I downloaded Mandrake71-inst.iso. When I booted the cdrom the
image was loaded, but then I got the following error message: "I could
not mount a cd on /dev/scd0". I did not have this problem with Mandrake
Whenever I try to install tar.gz files from a terminal...
I get the following errorwhy? and how do I fix this?
checking whether C compiler (gcc) works...no
configure error: installation or configuration problem:
C compiler cannot create executables
I installed all the gcc files...I could
Hello list,
I found my screen saver problem listed on the MUO bug list, #752, listed
under resolved. However, the associated messages don't explain the fix.
Where do I find the fix?
TIA
--
Darryl Gibson
Linux Neophyte (tm)
hi.
i need help to install the framebuffer device, i already install the
kernel that support it but i don´t know how configure it.
Saludos.
begin:vcard
n:Martinez Ramirez;Rogelio Enrique
tel;home:(01)(7)382-10-43
tel;work:(01)(7)318-38-11 Ext 7707
x-mozilla-html:TRUE
org:Instituto de
The ./INSTALL worked.
Thank you
Roman
Dennis Myers wrote:
flupke wrote:
You uncompress the archive :
tar zxf linux-ar-405.tar.gz
then you go into the newly created directoy, su to root, and execute the
installation script :
./INSTALL (or is it ./SETUP???)
Then, the
I finally got 7.0 to boot from the second drive and got LILO where I wanted
it, but now I have a different problem. I cannot print to a remote printer
on an Intel Netport Express print server. I can ping it. I can access all
of the settings from Netscape, but when I define the printer and try
Dunno about Mandrake, because I have been afraid to install plugger.
In SuSE 6.4 Plugger was causing this exact same thing. Uninstalling
plugger worked for me.
Mogens Jæger wrote:
Hey folks.
I have a little problem, I don't know how to solve.
I have my daughter and I as users om
I did thisand it wouldn't come up...had to go back to
7.0.1
Anthony Huereca wrote:
Download the latest version:
http://download.sourceforge.net/licq/licq-0.81-1.i386.rpm and then do "rpm -Uvh
licq-0.81-1.i386.rpm"
I want to install 0.81 licq...onto 7.0 can I do this?
HOW
I'm having a problem installing Mandrake Linux on my
PC. It's a 200MHz Pentinum. Whenever I run the
install program from the Installation CD from my PC, I
select that I want to install Linux on a Windows
partition. Then the PC reboots. From the text
message on the screen it looks like install
No, but I did check to see if the server was working and it was.
--
Mark
I love my Linux Box!
On Mon, 19 Jun 2000, Sevatio Octavio wrote:
:Have you tried to connect using Kmail to check if the mail server is down?
:
:Seve
:
:-Original Message-
:From: Mark Weaver [EMAIL PROTECTED]
On Mon, 19 Jun 2000, you wrote:
Hi folks...
Looking for some info about my modem, it turned up to be designed for
windows...
So, I am thinking about getting another one...
Which modem would be the one that satifies my needs, do you guys have any
sugestion...
I plan to use both windows
You can get the same thing at http://www.cheapbytes.com for $1.99 US.
--
Mark
I love my Linux Box!
On Mon, 19 Jun 2000, M Thompson wrote:
:Hi everyone,
:
:As a convenience to this list, I will burn MDK 7.1 onto two CD's at a cost
:of $6.50 for my time, my CD-R media, and shipping costs.
please un-subscribe the newbie email
Side note:
I went to netscrappy site and downloaded and installed plugger
works great on Mandrake 7.0 (Air).
Bambi
"Michael H. Collins" wrote:
Dunno about Mandrake, because I have been afraid to install plugger.
In SuSE 6.4 Plugger was causing this exact same thing. Uninstalling
I guess not :)
I think whatever it was they fixed it.
They got all their messages plus all the ones I sent
back to them...that I had already gotten directly, BTW
on the newbie and expert lists, other email addressed
to me AND some other mail that hadn't been address to
me but other people! I
On Mon, 19 Jun 2000, you wrote:
Scott Tyson wrote:
I'm struggling to find a Doc(s) on what/how is needed to get the new
Nvidia drivers going for my TNT2. I did an expert Mandrake 7.1 install
and picked Yes to have Xfree86 4.0 installed. Do I just DL the new
drivers from Nvidia and
Whenever I try to install tar.gz files from a terminal...
I get the following errorwhy? and how do I fix this?
checking whether C compiler (gcc) works...no
configure error: installation or configuration problem:
C compiler cannot create executables
I installed all the gcc files...I could
Thought of this, and did look around Seagate's web site, but didn't see
anything.
If anyone knows of a util for this, please let me know.
Thanks.
Ty
Paul [EMAIL PROTECTED] wrote:
On 11 Jun 2000, Tymanthius Rune Speak wrote:
I did a text install, and it simply bombed shortly after trying to
A quick look shows cheapbytes charges 6.99 for MDK 7.1 2 CD set, the $1.99
price is for MDK 7.0 single CD. Matt includes shipping in his price,
cheapbytes charges $5.00. If I hadn't already downloaded and burned my own
CD-R's I'd probably get a set from Matt as other online vendors look like
Nope. Go to www.linuxnewbie.org. Avatar wrote a nice NHF on how
to install the drivers under mandrake.
- Original Message -
From: Roland Hightower [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Monday, June 19, 2000 9:09 PM
Subject: Re: [newbie] NVida TNT2 setup question
On Mon, 19 Jun
Dear All,
i have a ip 168.95.1.1,it didn't provide httpd ftpd services,
if i want someone link to http://168.95.1.1 of ftp://168.95.1.1 ,
it will auto port fordward into my intranet PC 192.168.0.1,
and my questions is : how to use ipmasqadm command line?it sould be matchup
with ipchains rules?
Thanks to all who replied. I'll give the linuxnewbie site a whirl.
FYI.. X works just fine but If I'm not mistakne to run Quake3 with high
framerates the
new Nvidia drivers are required.
*** REPLY SEPARATOR ***
On 6/19/2000 at 11:23 PM Chris Hall scribbled:
Nope. Go to
Good day friends,
I did a modprobe 3c509 on, it went ok... irq10, i/o 0x300 etc
and after that I configured my network setting using the DrakConf...
set-up my host name, IP and all... it works but not for long and not
permanently.
when it worked, i can ping the server, itself and other PCs on
Found it at the GAIM homepage...
http://www.marko.net/gaim/
It seems that if you didn't have config data stored with AOL, you got
the no config error we were discussing. 0.9.19 is supposed to solve
this. While I'll be happy to install from a tarball, I wonder how long
it'll take MandrakeSoft to
I use Sendmail, It is a bit tricky to setup, But it works well..
mike...
Brian wrote:
Hey guys, I usually sit back and watch the proceedings here, but I am
after a "SECURE" webmail server program to run under Linux, I have
previously looked at NT mail servers and shuddered
Any
ZOOM 56K 0.90 mODEL nO:2919 is working fine with my linux-mandrake 7.1
But I did have trouble in configuring it.
Good luck
Bye
Chandu
- Original Message -
From: Rodrigo P. [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Monday, June 19, 2000 2:48 PM
Subject: [newbie] another modem
Hi
Scott Tyson wrote:
I'm struggling to find a Doc(s) on what/how is needed to get the new
Nvidia drivers going for my TNT2. I did an expert Mandrake 7.1 install
and picked Yes to have Xfree86 4.0 installed. Do I just DL the new
drivers from Nvidia and follow their install instructions? Do I
63 matches
Mail list logo