Hi all
Can K3b copy DVDs ? I have a norton ghost image on a rewriteable DVD
and I
need to burn it onto a write once disk to free up the rewriteable one? If K3b
can't do it any ideas.
--
Guy Fualks - The only man to enter the houses of Parliament with honest
intentions, (he was going
On Sunday 16 Jan 2005 18:33, Anders Lind wrote:
On Sun, 16 Jan 2005 18:02:03 +
John Bowden [EMAIL PROTECTED] wrote:
Hi all
Can K3b copy DVDs ? I have a norton ghost image on a
rewriteable DVD
and I
need to burn it onto a write once disk to free up the rewriteable
On Wednesday 12 Jan 2005 10:50, M.Schild wrote:
I run Mk 10 with an old printer HP Deskjet 690 that seems to have mecanical
problems. I am looking for a easy to install, no problem printer
with/without scanner. It doesn´t have to offer pro performance. as long as
it installs easily.
Any
On Wednesday 12 Jan 2005 21:08, Ron Hunter-Duvar wrote:
On January 12, 2005 05:44, John Layt wrote:
...
Short answer: HP or Epson, per your personal preference, as they have the
best Linux support. Avoid Canon and Lexmark, as they have terrible
support for Linux.
...
Personally, I
Hi list
just a quick one. When updating from mandrake control centre should I
close
any progs that are running that are on the update list. Will it tell me if I
need to reboot or restart x?
--
Guy Fualks - The only man to enter the houses of Parliament with honest
intentions, (he was
On Tuesday 11 Jan 2005 19:07, [EMAIL PROTECTED] wrote:
I agree get a router, and if you have more than one computer get a 4
port.
Though be careful what they say on the boxes, our dsl router broke, so
we went out to buy one, and ended up with something you put between
your modem and
On Monday 10 Jan 2005 08:26, Anne Wilson wrote:
On Monday 10 Jan 2005 01:19, Ana Paula Samodossi wrote:
On Sun, 09 Jan 2005 22:09:10 -0300, Angus Auld [EMAIL PROTECTED]
wrote:
If you are unable to get your winmodem to work, there are hardware
modems available, some reasonably priced.
On Sunday 09 Jan 2005 08:51, Aron Smith wrote:
On Saturday 08 January 2005 09:58 pm, Scott Wagner wrote:
Hello
Today I put a third hard drive and an additional 256MB of ram (there
were already 2 256MB sticks) in my computer, after which it would not
boot. I took the new ram out and it
On Sunday 09 Jan 2005 13:12, et wrote:
On Saturday 08 January 2005 11:45 pm, [EMAIL PROTECTED] wrote:
Thanks Mikkel, I will try subscribing to the expert list and see if
someone can help.
Cy
-- [EMAIL PROTECTED] wrote:
I don't remember if the standard install offers
On Sunday 09 Jan 2005 13:41, et wrote:
On Sunday 09 January 2005 03:51 am, Aron Smith wrote:
On Saturday 08 January 2005 09:58 pm, Scott Wagner wrote:
Hello
Today I put a third hard drive and an additional 256MB of ram (there
were already 2 256MB sticks) in my computer, after which
Ok 2 Kmail questions probably not related.
1, recently when I start kmail (when machine is first booted up) I get this
message box KDEInit could not kontact-Kmail.sh. Kmail stil starts up and
down loads any new mail and seems to work ok. I click ok and the error msbox
goes away. There is
On Sunday 09 Jan 2005 17:23, Scott Wagner wrote:
Thanks for all the responses. Well, stupidly, I tried (actually I
succeeded) in putting a stick of DDR ram in an SDRAM slot. The system
still worked after I took it out though. This morning I disconnected all
the drives, took the ram out and
On Sunday 09 Jan 2005 18:11, Greg Meyer wrote:
On Sunday 09 January 2005 10:00 am, John Bowden wrote:
1, recently when I start kmail (when machine is first booted up) I get
this message box KDEInit could not kontact-Kmail.sh. Kmail stil starts
up and down loads any new mail and seems
On Sunday 09 Jan 2005 22:38, JR wrote:
I'm wondering which option is best to connect to my laptop to a digital
camera (which hasnt been chosen yet).
I thought that if I got one that supported mass storage, then it would be
as simple as mounting my mp3 player. But someone else reccommended
On Sunday 09 Jan 2005 18:47, J or M Montgomery wrote:
On Sun, 09 Jan 2005 12:20:46 -0500
et [EMAIL PROTECTED] wrote:
starting it to see if there was any difference. It ran longer this
time, maybe 10 seconds, then there was a blue flash in the vicinity of
the power supply and it cut
On Saturday 08 Jan 2005 04:00, Carroll Grigsby wrote:
On Friday 07 January 2005 09:23 pm, [EMAIL PROTECTED] wrote:
I have a new Mandrake CD 10.1 Linux and I have XP already on my system.
I installed a FAT32 Hard Drive on the Second IDE interface as a Slave
since the CDROM is primary. Can
Hi Gang
I use a program on that other o/s ( the one who's name should never
be
spoken ) that checks my CD DVD disks after burning them to check for
errors , called CdCheck. It will do a basic read every sector, or crc, or
compare check and even try to recover data on a damaged disk.
On Saturday 08 Jan 2005 11:55, Rhein Christophe wrote:
Hello,
I'm back to the list after not knowing why I didn't access to the list a
few months?!!
I have a new ACER Aspire 1680 notebook since 2 weeks and I installed MDK
10.1 community.
Of course I had Win XP installed on the machine and
On Saturday 08 Jan 2005 19:11, Anne Wilson wrote:
On Friday 07 Jan 2005 16:15, John Bowden wrote:
On Thursday 06 Jan 2005 17:13, Miroslav Skoric wrote:
Stephen Kuhn wrote (long ago):
Has anyone upgraded the standard Samba 2.2.8 on MDK 9.1 to 3.0+?
stephen kuhn - proprietor
On Thursday 06 Jan 2005 17:13, Miroslav Skoric wrote:
Stephen Kuhn wrote (long ago):
Has anyone upgraded the standard Samba 2.2.8 on MDK 9.1 to 3.0+?
stephen kuhn - proprietor
Hi Stephen, have you managed to do that? I also run 9.1 on a couple of
server boxes and might need Samba too.
On Monday 03 Jan 2005 01:44, [EMAIL PROTECTED] wrote:
Ok. I use nero and just burned the iso into or with a bootable cd.
Sounds like I made a
mistake.. Normal for me.
On 2 Jan 2005 at 16:17, [EMAIL PROTECTED] wrote:
I have an older Toshiba that currently has win 98 on it. Got
Hi can any one tell me why I can't copy some directories containing files onto
a floppy disk. The disk was formatted with ext2 from within mdk10.1 on, a
second machine. I am trying to install mdk onto a new machine and I need to
use a driver for the on board ide raid chip.
On Monday 20 Dec 2004 06:36, Eric Huff wrote:
On Sun, 19 Dec 2004 14:52:17 -0800
Aron Smith [EMAIL PROTECTED] wrote:
when trying to burn ISOs to disk using K3b the disk always fails
the md5 sum I have set the burning speed as low as it will go 8x
but I still get the problem.
I need a
On Thursday 16 Dec 2004 14:37, JoeHill wrote:
On Thu, 16 Dec 2004 02:29:41 -0500
Charles A Edwards disseminated the following:
I have been getting a load from Germany and also a shed load yesterday
from DHTMLcentral.
I feel neglected and under privileged.
I do not get any that are
On Thursday 16 Dec 2004 16:32, Inhabitant of Zion wrote:
Hi
Its a windows virus -
Zafi.D
It seems it gets your address from somewhere and then starts sending
you an email every 2 seconds.
I have set up so they all go straight to the trash but it sure is a
pain in the neck as I am having
On Sunday 12 Dec 2004 02:51, Dennis Myers wrote:
On Saturday 11 December 2004 08:21 pm, Philippe Landau wrote:
Any advice on compatible cards?
Leadtek wintv cards seem to work well.
Hauppauge WinTV or Leadtek WinFast ?
it would be great if everybody with a tv card
made a few
On Saturday 11 Dec 2004 11:52, Stephen Kühn wrote:
On Sat, 2004-12-11 at 21:12, Rodolfo Medina wrote:
Hi.
On my PC I have both Windows 98 and Linux Mandrake.
I notice that the screen image under Windows fills completely the
monitor, whereas under Linux it is a bit more little:
the
- and if you do not have the
proper settings, you can manually set them there.
Same with display resolution.
John Bowden wrote:
Before you fiddle with your mandrake setup check to see if the monitor has
any
screen set up buttons, may be round the back on older units. I have a
spare monitor
Hi got Mandrake on my 1800 and I'm getting ready to install on my new 2600.
Does any one know if the Pinnacle PC TV pic card can work in mandrake? It
didnot work in mandrake 9 but it did detect the card. It said it had a SA
something chip, can't quite remember but I know it was not a BTU chip.
cards. They are real hardware
raid unlike Promise ones.
J.T.
From: John Bowden [EMAIL PROTECTED]
Reply-To: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Subject: [newbie] Partitioning Question
Date: Tue, 7 Dec 2004 18:33:52 -
I have got a machine with 2 hds a 80 gb and an 160gb. The 80 gb
On Tuesday 07 Dec 2004 02:35, Anthony Brooks wrote:
Wojciech Podgórni wrote:
Wojciech Podgórni
PS. Please post below my reply. Top posting is rather unwelcome on this
mailing list.
Could of snipped some of the original messages before complaining about top
posting.
Ok will post at
Ihave got a machine with 2 hds a 80 gb and an
160gb. The 80 gb dsk has a 20 gb ntfs partition for that other o/s! What I would
like to do is set up linux (MDK 10.1)on the rest of the 80gb dsk for the
user of that pc and have the 160gb dsk can be used by all the other machines on
the network
- Original Message -
From: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Tuesday, December 07, 2004 7:35 PM
Subject: Re: [newbie] Partitioning Question
I have got a machine with 2 hds a 80 gb and an 160gb. The 80 gb dsk has a
20 gb ntfs partition for that other o/s! What I would
I have installed mdk 10.1 over a week ago and am unable to do auto update or
do software updates. The kicker bar icon shows red with a question mark. If i
click on it .It takes me to the configure wizard. and when I put in my
mandrakeonline usr and pasword it gives me your log in password was
On Sunday 05 Dec 2004 03:41, care free wrote:
did a search on the mdk hardware database for both ide raid and the gigabyte
m/board but no joy. On the gigabyte site their are drivers for mdk 9 rh 8
to 9.
Check to see if the raid controller is supported in Mandrake 10.1. I
bought an off board
install disks. When I try to up date it with any of the online sources that
it gives across the world i get the ubove msg
On Sunday 05 Dec 2004 14:49, Wojciech Podgrni wrote:
Uytkownik John Bowden napisa:
I have installed mdk 10.1 over a week ago and am unable to do auto update
or do software
The version I have installed is the community version. which came off the
Linux Format magazine cover DVD.
Ok I have typed in the remove media command. How do I add a new online media
address?
On Sunday 05 Dec 2004 21:07, Wojciech Podgrni wrote:
Uytkownik John Bowden napisa:
Even if i try
Just purchased a Gigabyte GA-7N400 Pro2 mother board. It has an on
board ide
raid controller, ITE 8211 i think. I have 2 X 250GB maxters set up with raid
0 . Will Mandrake 10.1 (Linux Format mag version) detect and set it up OK. I
already have win 2000 pro on it.
Also will it
Hi list
Installed mdk 10.1 last weekend. Took 2 attempts to get Kmail to
collect my
email, though that was more down to blueyonder not accepting my password than
Kmail. I ended up del the account that was not working and starting afresh
with the wizard thingy. Any way its collecting
On Thursday 02 Dec 2004 02:24, JoeHill wrote:
I run Smoothwall as a fire wall. It will run on a p100 or better with 32mb of
ram and a 1 gig drive. Does not need a moniter or keyboard once set up This
setup will be more than powerfull enough to protect a home network. Then run
a decent av
Thanks you just saved me some time tracing a number of regular hits on my
firewall logs !
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
Join the Club : http://www.mandrakeclub.com
On Thursday 02 Dec 2004 15:36, [EMAIL PROTECTED] wrote:
Maybe overkill but had the bits lying around so why not, originally ran it on
a 486 DX 120 with 32Mb same Hd and a 56K modem.
On Thursday 02 Dec 2004 02:24, JoeHill wrote:
I run Smoothwall as a fire wall. It will run on a p100 or better
42 matches
Mail list logo