On Sat, 2003-04-05 at 21:58, Marc Oestreicher wrote:
>Has anyone been able to get the internal modem working on a IBM thinkpad
> 390e ML 9.1 I found the Lucent driver in allready compiled in a Mandrake
> rpm and installed it but no luck yet. This is my first time trying to get a
> linmode
Has anyone been able to get the internal modem working on a IBM thinkpad
390e ML 9.1 I found the Lucent driver in allready compiled in a Mandrake
rpm and installed it but no luck yet. This is my first time trying to get a
linmodem working and it is proving to be a bit of a challenge. so fa
To a terminal and try minicom perhaps ?? Make sure your p&p is turned off.
Lee
>I'm having problems with my Compaq. It's a 300 Mhz PII, 64 Mb.
>I don't know how to get Linux to find my modem. All info I can find about
the
>modem in Windows is this:
>Compaq Presario 56K-DFi. It's installed a
I'm having problems with my Compaq. It's a 300 Mhz PII, 64 Mb.
I don't know how to get Linux to find my modem. All info I can find about the
modem in Windows is this:
Compaq Presario 56K-DFi. It's installed as COM4 under win, using IRQ 10.
But when I query my computer for modems under the set
On Thursday 05 April 2001 15:13, you wrote:
> Steve Bergman wrote:
> > Hi,
> >
> > I have an friend that just got 7.2 installed on his
> > machine. It has a Rockwell Conexant (softk56) modem. I
> > have suggested that he get something else. His hardware
> > config is unknown and he is not (yet
Steve Bergman wrote:
> Hi,
>
> I have an friend that just got 7.2 installed on his
> machine. It has a Rockwell Conexant (softk56) modem. I
> have suggested that he get something else. His hardware
> config is unknown and he is not (yet ;-) a techie. He
> doesn't see and com ports on the mac
Hi,
I have an friend that just got 7.2 installed on his machine. It has a
Rockwell Conexant (softk56) modem. I have suggested that he get something
else. His hardware config is unknown and he is not (yet ;-) a techie. He
doesn't see and com ports on the machine so I'm recommending an int
Firstly is your modem a PCI or ISA modem. If it's PCI then it's most likely to
be a winmodem which will not work with linux. If it's an ISA modem (with dip
switches or jumpers) you need to disable the PnP and set it up using
jumpers/switches to say COM4 IRQ3. Remember that the dev/ttyS number runs
"Rajesh A" <[EMAIL PROTECTED]> wrote:
> Hi,
>
> I have Installed Redhat Linux 6.0 on my machine. I am not able to configure
> the Internal Modem. I tried all ttyS0 to ttyS3, nothing works.
>
> My windows98 says, that modem is on IRQ9. Can someone please tell me, how
to
> configure this interna
Hi,I have Installed Redhat Linux 6.0 on my
machine. I am not able to configurethe Internal Modem. I tried all ttyS0 to
ttyS3, nothing works.My windows98 says, that modem is on IRQ9. Can
someone please tell me, how toconfigure this internal modem.thanks
& regards,Rajesh
10 matches
Mail list logo
