Originally to: All
This is a MIME-formatted message. If you see this text it means that your
E-mail software does not support MIME-formatted messages.
--=_tcob1.net-7255-1008635612-0001-2
Content-Type: text/plain; charset=us-ascii; format=flowed
Content-Transfer-Encoding: 7bit
At 12:00 AM
snip
You were right about adding the Octal addresses. (That is Octal, isn't it?)
(I love it when I (think) I know something:) No, that's not octal, it's
hex. Octal would not have an 8 in it -- only 0 thru 7.)
Randy Kramer
That's what I get for typing when I'm tired. ;)
You're correct
Ivan Offalich wrote:
I looked all over the Linux Documentation Project website for this
information. I couldn't seem to find it anywhere so I was hoping someone
could help me with it on this list.
I'll explain my situation.
I have two hard drives installed on my computer.
hda is
IO I looked all over the Linux Documentation Project website for this
IO information. I couldn't seem to find it anywhere so I was hoping someone
IO could help me with it on this list.
IO I'll explain my situation.
IO I have two hard drives installed on my computer.
IO hda is dedicated to
Since this will be a long post I snipped everything previous.
I will post my IDE chain and my /etc/lilo.conf file and hopefully that will
help everyone with determining what exactly I'm what I'm missing. ;)
Primary IDE Master: 6.4 GIG EIDE Harddrive (aka hda)
3 partitions C:, E:, and F: in
that the image files and kernals are not
found in hda.
If you can swap drives, so that Linux will become hda and windowz hdb.
From: Ivan Offalich [EMAIL PROTECTED]
Reply-To: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Subject: Re: [newbie] LILO issues with 2 hard drives.
Date: Mon, 17 Dec 2001 08:56:55 -0600
I did go to thearchive of the mailing list and didn't see it. Repost it
please.
From: Ivan Offalich [EMAIL PROTECTED]
Reply-To: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Subject: Re: [newbie] LILO issues with 2 hard drives.
Date: Mon, 17 Dec 2001 14:01:05 -0600
Actually I did post my /etc
[Repost]
At 08:10 AM 12/17/01 -0600, I wrote:
Since this will be a long post I snipped everything previous.
I will post my IDE chain and my /etc/lilo.conf file and hopefully that
will help everyone with determining what exactly I'm what I'm missing. ;)
Primary IDE Master: 6.4 GIG EIDE
it
please.
From: Ivan Offalich [EMAIL PROTECTED]
Reply-To: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Subject: Re: [newbie] LILO issues with 2 hard drives.
Date: Mon, 17 Dec 2001 14:01:05 -0600
Actually I did post my /etc/lilo.conf file earlier today. If you didn't
receive it through
May you add the following
disk=/dev/hda
bios=0x80
disk=/dev/hdb
bios=0x81
disk=/dev/hdc
bios=0x82
disk=/dev/hdd
bios=0x83
or if it does not work
disk=/dev/hda
bios=0x80
disk=/dev/hdc
bios=0x81
to the /etc/lilo.conf right under the line boot=/dev/hda ? and of
Ivan Offalich wrote:
At 12:00 AM 12/18/01 +0200, Onur Kucuk wrote:
May you add the following
disk=/dev/hda
bios=0x80
disk=/dev/hdb
bios=0x81
disk=/dev/hdc
bios=0x82
disk=/dev/hdd
bios=0x83
snip
You were right about adding the Octal addresses. (That is
I looked all over the Linux Documentation Project website for this
information. I couldn't seem to find it anywhere so I was hoping someone
could help me with it on this list.
I'll explain my situation.
I have two hard drives installed on my computer.
hda is dedicated to Windoze.
hdc is
To: Mandrake Newbie
Subject: [newbie] LILO issues with 2 hard drives.
I looked all over the Linux Documentation Project website for this
information. I couldn't seem to find it anywhere so I was hoping someone
could help me with it on this list.
I'll explain my situation.
I have two hard drives
On Sunday 16 December 2001 20:57, you wrote:
I looked all over the Linux Documentation Project website for this
information. I couldn't seem to find it anywhere so I was hoping someone
could help me with it on this list.
I'll explain my situation.
I have two hard drives installed on my
14 matches
Mail list logo