snip
You were right about adding the Octal addresses. (That is Octal, isn't it?)
(I love it when I (think) I know something:) No, that's not octal, it's
hex. Octal would not have an 8 in it -- only 0 thru 7.)
Randy Kramer
That's what I get for typing when I'm tired. ;)
You're correct
Ivan Offalich wrote:
I looked all over the Linux Documentation Project website for this
information. I couldn't seem to find it anywhere so I was hoping someone
could help me with it on this list.
I'll explain my situation.
I have two hard drives installed on my computer.
hda is
IO I looked all over the Linux Documentation Project website for this
IO information. I couldn't seem to find it anywhere so I was hoping someone
IO could help me with it on this list.
IO I'll explain my situation.
IO I have two hard drives installed on my computer.
IO hda is dedicated to
Since this will be a long post I snipped everything previous.
I will post my IDE chain and my /etc/lilo.conf file and hopefully that will
help everyone with determining what exactly I'm what I'm missing. ;)
Primary IDE Master: 6.4 GIG EIDE Harddrive (aka hda)
3 partitions C:, E:, and F: in
that the image files and kernals are not
found in hda.
If you can swap drives, so that Linux will become hda and windowz hdb.
From: Ivan Offalich [EMAIL PROTECTED]
Reply-To: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Subject: Re: [newbie] LILO issues with 2 hard drives.
Date: Mon, 17 Dec 2001 08:56:55 -0600
I did go to thearchive of the mailing list and didn't see it. Repost it
please.
From: Ivan Offalich [EMAIL PROTECTED]
Reply-To: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Subject: Re: [newbie] LILO issues with 2 hard drives.
Date: Mon, 17 Dec 2001 14:01:05 -0600
Actually I did post my /etc
[Repost]
At 08:10 AM 12/17/01 -0600, I wrote:
Since this will be a long post I snipped everything previous.
I will post my IDE chain and my /etc/lilo.conf file and hopefully that
will help everyone with determining what exactly I'm what I'm missing. ;)
Primary IDE Master: 6.4 GIG EIDE
it
please.
From: Ivan Offalich [EMAIL PROTECTED]
Reply-To: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Subject: Re: [newbie] LILO issues with 2 hard drives.
Date: Mon, 17 Dec 2001 14:01:05 -0600
Actually I did post my /etc/lilo.conf file earlier today. If you didn't
receive it through
Ivan Offalich wrote:
At 12:00 AM 12/18/01 +0200, Onur Kucuk wrote:
May you add the following
disk=/dev/hda
bios=0x80
disk=/dev/hdb
bios=0x81
disk=/dev/hdc
bios=0x82
disk=/dev/hdd
bios=0x83
snip
You were right about adding the Octal addresses. (That is
Eh, this may not be a lilo problem at all.
Linux may be getting an erroneous report about the hard drive size (of
the primary or secondary) and the location of the boot sector of the
secondary.
This would result in the behaviour you have seen. The initial installer
may have received an
On Sunday 16 December 2001 20:57, you wrote:
I looked all over the Linux Documentation Project website for this
information. I couldn't seem to find it anywhere so I was hoping someone
could help me with it on this list.
I'll explain my situation.
I have two hard drives installed on my
11 matches
Mail list logo