I like what Ian said. although, 4U is a bit daunting.
You can opt for 1U-2U, 1-2 processors.
You can have a chassis with 8 drive bays. Fit for >= 18TB of storage.
>From there you can get solid state HDs and regular drives of your choice.
>Simple controller that can handle them - and has a drive
The other day my hard disk became completely full due to a home directory with
some massive files.
This caused the server to fail to boot properly and only allowed me into
maintenance mode as root
I was unable to navigate to the home directories as root to delete stuff. How
could I achieve th
3 июня 2014 г. 19:26:05 CEST, david boutcher пишет:
>The other day my hard disk became completely full due to a home
>directory with some massive files.
>
>This caused the server to fail to boot properly and only allowed me
>into maintenance mode as root
>
>I was unable to navigate to the home di
On 06/03/14 13:26, david boutcher wrote:
> The other day my hard disk became completely full due to a home directory
> with some massive files.
>
> This caused the server to fail to boot properly and only allowed me into
> maintenance mode as root
>
> I was unable to navigate to the home direc
3 июня 2014 г. 19:37:07 CEST, James Carlson пишет:
>On 06/03/14 13:26, david boutcher wrote:
>> The other day my hard disk became completely full due to a home
>directory with some massive files.
>>
>> This caused the server to fail to boot properly and only allowed me
>into maintenance mode as
Thank you. I'm a bit of a novice with Solaris but from what I understand that
would make sense to use the mount command.
To explain the symptoms and what led up to the failure...
I have open Indiana as an os replicated across 2 500 gb drives.
A zfs pool for storage which holds my media and a
H Folks,
I've got the following...
mich@jaguar:~# cfgadm -al
Ap_Id Type Receptacle Occupant
Condition sata0/0::dsk/c3t0d0disk connected
configured ok sata0/1sata-port
emptyunconfigured ok sata0/2::dsk/c3t2d0
In message <3a87db63-f231-4ddc-b97d-1f6a3fc7b...@me.com>, david boutcher writes
:
>Virtual box is on the os disk but it's vms are on that separate pool.
>
>Sometimes, virtual box catches me out and installs a new/cloned machine onto t
>he os drives
My WAG is that while you have your VBox harddri
Michelle,
Am 03.06.2014 um 20:39 schrieb Michelle Knight :
> H Folks,
>
> I've got the following...
>
> mich@jaguar:~# cfgadm -al
> Ap_Id Type Receptacle Occupant
> Condition sata0/0::dsk/c3t0d0disk connected
> configured ok sata0/1
In regard to: [OpenIndiana-discuss] ZFS replacement problem, Michelle...:
pool: tank
state: ONLINE
scan: resilvered 1.70M in 0h0m with 0 errors on Tue Jun 3 18:19:48
2014 config:
NAME STATE READ WRITE CKSUM
tank ONLINE 0 0 0
raidz1-
Thanks Andreas,
Good suggestion, however, it didn't work...
mich@jaguar:~# zpool replace -f tank c3t4d0s1 c3t0d0
cannot replace c3t4d0s1 with c3t0d0: no such device in pool
I have also tried exporting and importing the pool, as suggested in
other forums.
Michelle.
On Tue, 3 Jun 2014 21:01:49
You created the pool using slices and not whole disks (that's why it's cXtXdXsX
instead of just cXtXdX).
That's necessary only for the root pool, it's better not to do that for data
pools.
If that pool is empty, destroy it and rebuild it using whole disks (just the
cXtXdX part, no sX), then yo
After formatting c3t0d0 run.
zpool replace tank c3t4d0s1 c3t0d0s1
On Tue, Jun 3, 2014 at 8:05 PM, Michelle Knight
wrote:
> Thanks Andreas,
>
> Good suggestion, however, it didn't work...
>
> mich@jaguar:~# zpool replace -f tank c3t4d0s1 c3t0d0
> cannot replace c3t4d0s1 with c3t0d0: no such
Hi Tim,
I don't recall creating them with slices; like you say, only the root
pool needs that, which was done because originally it had two SSD units
for root in another machine.
There was a bit of kerfaffery with other versions, but I do beleive I
copied everything off, then destroyed the set an
14 matches
Mail list logo
