Neutron has services like Router, Firewall, LB, VPN.
But Now waf(web application firewall) service has not been included.
Does everyone think waf should been implemented by NFVM?
___
Mailing list: http://lists.openstack.org/cgi-bin/mailman/listinfo/opens
tween slots that are
compatible with all time zones.
Regards
James
[0]
https://javacruft.wordpress.com/2018/03/16/winning-with-openstack-upgrades/
[1] https://governance.openstack.org/sigs/
___
Mailing list: http://lists.openstack.org/cgi-bin/mailman/listin
Hi Torin
On Tue, 13 Mar 2018 at 13:59 Torin Woltjer
wrote:
> Thank you for the response James.
>
> I now have a couple of further questions regarding boot volume support on
> nova-lxd.
>
> Is this feature on the radar?
>
Not right now; I'm not entirely sure its even
ght now).
You have highlighted a documentation gap - there are a few non obvious
things todo like ensuring that cinder creates RBD devices with a minimal
feature set to support use the the kRBD driver used for nova-lxd. Will
look to put a howto for ceph in place shortly!
Cheers
James
___
cloud functional with Libvirt/KVM before you made the switch to using
nova-lxd? The neutron log files would be a good place to look so see what
went wrong.
Regards
James
[0] https://linuxcontainers.org/lxd/getting-started-openstack/
___
Mailing list: htt
.
James
From: Navdeep Uniyal
Date: Friday, February 9, 2018 at 12:40 PM
To: OpenStack Mailing List
Subject: [Openstack] Routing in connected VMs
Dear all,
I am trying to create a network chain manually of VMs in openstack by entering
the routing table entries in the machines. However, it doesn’t
Ironic user can change ipmi address so that OpenStack ironic lose control of
bare mental.
I think that is unacceptable.
It seems that we should make ironic image without root privilege
From: xief...@sina.com [mailto:xief...@sina.com]
Sent: Thursday, January 11, 2018 9:12 AM
To: Guo James
I notice that after an ironic user get a bare mental successfully, he can
access ipmi through ipmi device although he can't access ipmi through LAN
How to prevent the situation?
If he modify ipmi configuration, that will be mess.
___
Mailing list: htt
;
> On 01/02/2018 06:09 AM, Guo James wrote:
> > Hi guys
> > I know that Ironic has support multi-nova-compute.
> > But I am not sure whether OpenStack support the situation than every
> > nova-compute has a unshare ironic And these ironic share a nova and a
> > neu
Hi guys
I know that Ironic has support multi-nova-compute.
But I am not sure whether OpenStack support the situation than every
nova-compute has a unshare ironic
And these ironic share a nova and a neutron
Thanks
___
Mailing list: http://lists.openstac
We are using RDO in production ? But we have done some other things to
custom to our builds. If you use RedHat, Canonical Linux they provide you
with subscription support.
James R. Fleet
Innovative Solutions Technology
484 Williamsport Pike #135
Martinsburg, WV 25404
888.809.0223 ext.702
On
-++
The actual Layer 4 port used may vary between drivers (linuxbridge vs OVS), but
that would either be hard-coded or defined within a configuration file.
James
From: Vikash Kumar
Date: Friday, April 28, 2017 at 6:50 AM
To: openstack-dev , Opens
Hi Amit,
You can create a port on a particular subnet using the neutron/openstack CLI,
and then boot the instance using the port rather than the network. The
difference being nova boot --port-id versus --net-id.
James
From: Amit Uniyal
Date: Friday, April 28, 2017 at 4:12 AM
To: openstack
the VM.
> Does OpenStack support SR-IOV VF vlan trunk? If yes, what kind of
> configuration is needed?
VLAN filtering is the default (and only) behavior supported by Neutron as far
as I know. Without modifying the code, you’d be limited to a single VLAN per VF
(untagged within the VM).
--
visibility to specific projects
for both external and non-external networks. If you’re seeing something
different, please let us know.
James
From: Lars-Erik Helander
Date: Thursday, April 6, 2017 at 8:30 AM
To: "openstack@lists.openstack.org"
Subject: [Openstack] [openstack] Tena
ink may help:
https://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1004099
James
From: Manuel Sopena Ballesteros
Sent: Thursday, March 30, 2017 8:05:51 PM
To: openstack@lists.openstack.org
Subject: [Openstack] running control
ss
Cheers
James
___
Mailing list: http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
Post to : openstack@lists.openstack.org
Unsubscribe : http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
I could take up some of the effort if someone can get me up to speed. I am
also currently unemployed and looking for work, so I am unable to speak to
my availability in the future. I know how to build and test-deploy .deb
packages though. I actually just built something I can deploy full-stack
t
In multi-tenant solution, provision network should communicate with management
network.
For example, ironic conductor will deploy user image to ironic node through
iscsi.
But provision network is created through neutron. In most of situation, the
provision network is controlled by SDN.
How ca
That is a good idea Peter to troubleshoot the disk access its not making
sense I am able to mount the volume and write files to it but it seems a
permission thing with libvirt and Nova.
James Fleet
James R. Fleet
Innovative Solutions Technology
484 Williamsport Pike #135
Martinsburg, WV 25404
Hello Peter,
Yes, the command to add it to SElinux is setsebool -P virt_use_fusefs on
which allows the client to connect using SElInux.
James R. Fleet
Innovative Solutions Technology
484 Williamsport Pike #135
Martinsburg, WV 25404
888.809.0223 ext.702
On Tue, Jan 24, 2017 at 11:17 AM, Peter
:
c6634e67-b293-4424-96ec-f0c58b2bf081] libvirtError: Unable to open file:
/var/lib/nova/instances/c6634e67-b293-4424-96ec-f0c58b2bf081/console.log:
Permission denied 2017-01-23 18:29:25.798 12184 ERROR
I am hoping I can find someone running glusterfs and can offer some insight
to our issue.
James
On Wed, Jan 11, 2017 at 09:34:32PM +, Ivan Derbenev wrote:
> if both vms start using all 64gb memory, both of them start using swap
Don't overcommit RAM.
> So, the question is - is it possible to prioritize 1st vm above 2nd? so the
> second one will fail before the 1st, to leave maximum pos
Can VNF vRouter occupy openstack subnet gateway ip address and used as a router
to process openstack tenant traffic?
If it is possible, I think the solution conflict with openstack orchestration.
Because the router is considered as a vm in openstack instead of router.
Caller of Openstack api wi
It seems that ml2 driver of Nexus1000V can only work with Nexus 1000V for KVM.
Is there any solution to integrate openstack with Nexus 1000V for VMware?
___
Mailing list: http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
Post to : openst
In neutron, it is not permitted to create vxlan network with physical network
option
In type_tunnel,py, the function validate_provider_aegment executes the
limitation.
What is the consideration?
___
Mailing list: http://lists.openstack.org/cgi-bin/ma
Hi Satish,
It’s hard to tell from this output, the port was likely added using the
‘router-gateway-set’ command. Try using the ‘router-gateway-clear
’ command and syntax instead. You can only delete ports
with router-interface-delete if they were added with ‘router-interface-add’.
--
James
he physical gateway device to the router’s IP address
you specified when creating the port, since the router will not SNAT traffic on
that interface. It’s a wonky configuration that I don’t really recommend you
implement unless you absolutely have to.
--
James Denton
Network Architect
Rackspac
, reducing
the total number of IPs available for use as floating IPs.
--
James Denton
Network Architect
Rackspace Private Cloud
james.den...@rackspace.com
On 9/2/16, 1:26 PM, "Satish Patel" wrote:
Thanks James,
I didn't understand your following statement.
&
subnet as well, otherwise
they will each grab an address as well.
James
On 9/2/16, 10:34 AM, "Satish Patel" wrote:
Its very weird requirement, stay with me to explain.
We have /24 public IP pool which we are using since long time and we
cherry picked IP address from th
external networks. Networks, external
or not, can be shared amongst all projects, or limited to certain projects with
an RBAC policy.
James
On 9/1/16, 12:09 PM, "Satish Patel" wrote:
Can i create single Router and shared them between multiple Projects?
or its stupidity? Just
pool. If you
need to attach the router to an internal network to serve as the gateway for
said network, use the ‘router-interface-add’ command.
James
On 9/1/16, 10:51 AM, "Satish Patel" wrote:
I have external provider network and today when i tried to attached it
to one of
On Wed, Aug 24, 2016 at 03:25:26PM -0400, Satish Patel wrote:
> I enabled following in nova.conf on compute node but didn't work :(
>
> flat_injected=true
>
> Do i need to do anything else?
Are you using flat networking?
Nova-networks or Neutron?
At this point, if you're not using DHCP, your on
Anybody knows reason?
___
Mailing list: http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
Post to : openstack@lists.openstack.org
Unsubscribe : http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
Now when a volume is attached to a vm, we can't snapshot it.
I think vCenter does't have similar limitation. So how about removing the
limitation?
___
Mailing list: http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
Post to : openstack@l
Hi,
> On Jul 13, 2016, at 3:29 PM, Nalee Jang wrote:
>
> [filter:authtoken]
>
> paste.filter_factory = keystonemiddleware.auth_token:filter_factory
>
> auth_uri = http://192.168.56.101:5000
>
> auth_url = http://192.168.56.101:35357
>
> memcached_servers = 192.168.56.101:11211
>
> auth_plug
Hello,
> On Jul 13, 2016, at 10:41 AM, Nalee Jang wrote:
>
> Nowadays, I have installed OpenStack Swift Mitaka manually referring to
> OpenStack official ubuntu manual. but swift is not working. swift is erupting
> below error messages. I don't understand this situation. I think swift
> confi
___
Mailing list: http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
Post to : openstack@lists.openstack.org
Unsubscribe : http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
section of the linuxbridge agent config file and restart the agent. This should
be done across all nodes, and will only apply to Liberty and above.
James
From: Andreas Scheuring
Sent: Monday, June 20, 2016 6:06 AM
To: openstack@lists.openstack.org
Subject:
Traditional network device vendors have embrace openstack.
So H3C and Huawei in china have implemented the solution.
发件人: Ops Cloud [mailto:o...@19cloud.net]
发送时间: 2016年6月21日 9:12
收件人: openstack@lists.openstack.org
主题: [Openstack] Virtual networking by hardware
Hi
Rather than the soft SDN solut
Different ironic node maybe have different hardware.
So OS must install different hardware driver.
Then how to make image adapt to different hardware?
Do we need tools like sysprep or kudzu?
___
Mailing list: http://lists.openstack.org/cgi-bin/mailman/l
osting the L3 agent(s), and possibly all nodes in the case of DVR.
James
From: John van Ommen
Sent: Wednesday, May 4, 2016 9:11 PM
To: openstack@lists.openstack.org
Subject: [Openstack] Multi-Node OpenStack with no VLANs
I am working on an OpenStack
I am running Openstack Liberty and we have been trying to mount volumes to
our instances and everything looks good in Horizon but nothing mounts. My
Storage node and Compute node are on the same hosts. I searched the web
but was unable to find the solution to this problem. Any help is greatly
ap
.
physical_interface_mappings = physnet1:eth0). You can then create a single flat
and multiple VLAN provider networks using --provider:physical_network=physnet1
and segmentation IDs other than 50. The LinuxBridge agent will create VLAN
interfaces and place them in the respective bridges.
James
er
volume_group = cinder-volumes
iscsi_protocol = iscsi
iscsi_helper = lioadm
iscsi_ip_address=10.0.0.30
So I am very confused as to why I can't create volumes.
Thank You
James R. Fleet
Innovative Solutions Technology
484 Williamsport Pike #135
Martinsburg, WV 25404
888.809.0223 ext.702
___
get characteristics
of the port:
get_attr: [instance0_port0, fixed_ips, 0, ip_address] -or-
get_attr: [instance0_port0, fixed_ips, 0, mac_address]
Hope that helps.
James
From: Brent Troge mailto:brenttroge2...@gmail.com>>
Date: Thursday, March 24, 2016 at 2:44 PM
To: &quo
I believe this will be addressed in Mitaka:
https://bugs.launchpad.net/neutron/+bug/1459423
JD
On 3/18/16, 12:15 PM, "iain smith" wrote:
>Hi all -
>
>When using neutron's VPNaaS with the Strongswan back-end, has anyone
>come up against the seemingly needless limitation whereby the 'Ad
VirtualBox
virtual machine and the RDO Liberty repo. I have about a 90-95% success rate on
the first run.
James
From: Wilson Kwok mailto:leiw...@gmail.com>>
Date: Thursday, March 3, 2016 at 11:38 PM
To: Adam Young mailto:ayo...@redhat.com>>
Cc: Openstack
mailto:openstack@lists.o
he number of IPs available, but it beats having to give each tenant router an
IP. There is some NAT/routing/Proxy ARP magic that goes into making this config
work. Assaf’s blog is a great resource for that info.
James
From: Tom Verdaat mailto:t...@server.biz>>
Date: Wednesday, January 20,
helps,
James
From: Akshay Kumar Sanghai
mailto:akshaykumarsang...@gmail.com>>
Date: Friday, January 15, 2016 at 3:13 PM
To: "openstack@lists.openstack.org<mailto:openstack@lists.openstack.org>"
mailto:openstack@lists.openstack.org>>
Subject: [Openstack] [opensta
Old (and undesirable) behavior was to apply the ‘firewall’ with all tenant
routers.
Using --router allows you to apply the ‘firewall’ with one or more specified
routers.
IIRC, there’s nothing special needed to utilize this other than to have the
FWaaS driver and extension enabled.
James
f 4095 means that the agent
was unable to find a corresponding Neutron port or some other failure occurred.
Take a look inside the DHCP namespace and see if the interface name corresponds
with this one (the 10-char ID would be the same). Perform a ‘neutron port-list
| grep <10-char id>’ and s
physical interfaces while doing these
tests to see if/where traffic is getting dropped.
James
> On Nov 17, 2015, at 11:31 AM, Tyler Couto wrote:
>
> Thanks Andreas. My security groups do allow icm
As a workaround, maybe you can try putting using firewall-update
--admin-state-up after it goes into error state to recover after
making the rule change.
James
> On Nov 6, 2015, at 5:27 AM, Erdősi Péter wrote:
>
> Hy guys!
>
> We facing a problem with FWaaS on Kilo release
busterswt/openstackparis2014>
James
> On Oct 18, 2015, at 3:15 AM, Florian Rommel
> wrote:
>
> Hi, I have a problem that I need to convert our Dev environment to VLAN from
> GRE tunnels.
> Can someone assist me on how complicated it is? the environment is about 10
> nodes including c
Hi Thiago,
I'm not sure, but this may be a change from v1 API to v2 API. Here's a bug I
found a few months ago that may be related:
https://bugs.launchpad.net/python-glanceclient/+bug/1399778
James
From: Martinx - ジェームズ
Sent: Sunday, October
root_helper = sudo /usr/local/bin/neutron-rootwrap /etc/neutron/rootwrap.conf
#tunnel_types = vxlan
vxlan_udp_port = 8472
l2 population = false
Start by correcting those issues and restart the OVS agents across your hosts.
The agent log may be of help here as well.
James
> On Oct 14, 2015, at 2:38
Hi Georgios,
You should be able to create a Neutron port with the custom MAC address and
boot the instance with that port using --nic port-id rather than --nic net-id.
James
> On Oct 8, 2015, at 6:43 AM, Georgios Dimitrakakis
> wrote:
>
> Dear all,
>
> I am wondering i
oubleshooting instance to
instance communication.
James
Sent from my iPhone
> On Oct 2, 2015, at 3:48 PM, Sławek Kapłoński wrote:
>
> Hello,
>
> I'm trying to configure small openstack infra (one network node, 2
> compute nodes) with linux bridge and vxlan tenant netw
Have you tried configuring 172.29.236.100 on br-mgmt in addition to the address
that is there? That is the default IP set for internal_lb_vip_address if I’m
not mistaken, and is what haproxy will bind to.
James
> On Sep 11, 2015, at 4:06 PM, Duck Euler wrote:
>
>
> runnin
bridge. If it were a vlan
network, Neutron would put eth11.xxx in the bridge instead.
James Denton
Network Architect
Rackspace Private Cloud
james.den...@rackspace.com
> On Sep 2, 2015, at 12:39 AM, Michael Gale wrote:
>
> Hello,
>
> I am running the Kilo release using os-ans
tell what you're seeing. Do you mind not masking them
this time around?
Also, what is the IP address of the instance? Seeing that this is an
all-in-one, I'm guessing you didn't having issues with DHCP?
Thanks,
James
From: Martinx - ジェームズ
Sen
ump -eni tap9a546be0-d6"!
What do your security group rules look like?
> What is driving me crazy is that, on top of this very same setup (including
> e1000 driver), but with different vlan tag, it works!
Is it the same eth3 interface? You may want to avoid vlan 666, anyway. Ne
d to look into using gre or vxlan instead to overcome that limitation.
James
> On Jun 27, 2015, at 6:47 AM, YANG LI wrote:
>
> Thank you so much, James! This is so helpful. Another confusion I have is
> about network_vlan_ranges. Is this network VLAN id range? If so, does it has
> to m
|
That info is not available to non-admin users by default.
James
> On Jun 26, 2015, at 7:38 AM, YANG LI wrote:
>
> Thanks, James for the explanation. it make more sense now. <http://now.it/>
> it is possible that a instances on same tenant network r
tenant’ vlan-based networks and external
‘provider’ networks, all of that traffic could traverse the same provider
bridge on the controller/network node, but would be tagged accordingly based on
the network (ie. vlan 100 for external network, vlan 200 for tenant network).
Hope that’s not too confusing
device. The gateway device will
need to support multiple ips/subnets on the same interface. Most routers can
handle this.
James
> On Jun 24, 2015, at 7:59 AM, Narayanan, Krishnaprasad
> wrote:
>
> Hi,
>
> In continuation from my earlier email, I have created the port u
Hi,
I'd like to apologize to all of the people who worked hard on
researching and proposing names for the M release that did not appear in
the poll.
When we worked on the new method for choosing a name, we did so with the
idea that the entire process should be public and that the community is
equ
Hi Daniel,
There should be no different between those versions. As for vlan tagging, using
tagging allows you to have multiple networks on the same physical
interface/bridge. If you use a flat networks you are limited to 1 per
interface/bridge.
James
Sent from my iPhone
On Jun 6, 2015, at 5
screenshots didn't come
through, so if you can post the Cli output somewhere that would be helpful.
James
Sent from my iPhone
On Jun 4, 2015, at 10:18 PM, Wilson Kwok
mailto:leiw...@gmail.com>> wrote:
Any one can help?
於 2015/5/29 上午10:39,"Wilson Kwok" mailto:leiw...@gm
they have no
idea WHAT type of network they've created. Just FYI.
I apologize for being a bit long winded here. Hope this helps!
James
Sent from my iPhone
On Jun 5, 2015, at 2:45 AM, Geo Varghese
mailto:gvargh...@aqorn.com>> wrote:
Kevin,
Thanks for the reply.
Have
ope that makes sense.
James
> On May 26, 2015, at 7:31 PM, BYEONG-GI KIM wrote:
>
> Hello all,
>
> Thank you very much for sharing the information!
>
> I'm now trying to configure 3 node deployment (1 controller, 1 compute, and 1
> network) with LinuxBridge P
figure two vlan interfaces on the
host that could serve in two distinct provider bridges (OVS) or be used for two
flat networks with LinuxBridge. This is a tedious and limiting configuration,
though.
James
> On May 27, 2015, at 8:55 AM, Yngvi Páll Þorfinnsson wrote:
>
> Hi, to clar
etworking-guide/deploy_scenario1b.html>
All: http://docs.openstack.org/networking-guide/
<http://docs.openstack.org/networking-guide/>
James
> On May 26, 2015, at 11:22 AM, Remo Mattei wrote:
>
> Hi all,
> I did a project with a TELCO, and used both Linux Bridge and OVS, wi
you do use a new dedicated
network/interface.
Every node (controller/network and compute) will need its own address in that
field.
James
> On May 26, 2015, at 12:45 PM, Janki Chhatbar wrote:
>
> Ya sure
>
> I have 2 Ubuntu 14.04 machines acting as controller nodes (Keystone, Ga
sudo ubuntu-bug nova-conductor
this will ensure that bugs get logged in the right place in Launchpad.
Thanks and have fun!
Cheers
James
(on behalf of the Ubuntu OpenStack team)
[0]
http://reqorts.qa.ubuntu.com/reports/ubuntu-server/cloud-archive/kilo_ve
rsions.html
[1] https://bugs.launchpa
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA256
Hi All
On 17/04/15 21:15, James Page wrote:
> The Ubuntu OpenStack Engineering team is pleased to announce the
> general availability of the first release candidate of the
> OpenStack Kilo release in Ubuntu 15.04 development and for Ubunt
Hi Christina,
Is 131.154.96.28 configured as a floating IP and associated with the LB VIP
port? The NAT is configured on the router connected to the VIP network, in this
case private_net. Can the router access the VIP 10.0.1.22? I’d start there.
James
> On May 1, 2015, at 4:21 PM, Crist
he updates pocket so
should publish out in the next hour or so.
- --
James Page
Ubuntu and Debian Developer
james.p...@ubuntu.com
jamesp...@debian.org
-BEGIN PGP SIGNATURE-
Version: GnuPG v2
iQIcBAEBCAAGBQJVNgtPAAoJEL/srsug59jDLzkP/1SOdPXx8ZnIC0erqRM8NcrL
saUi+5J2TviFVR
reate vlan interfaces.
James
> On Apr 17, 2015, at 10:26 PM, Martinx - ジェームズ
> wrote:
>
> Perfect! I followed the Juno documentation here:
>
> http://docs.openstack.org/juno/install-guide/install/apt/content/ch_preface.html
>
> <http://docs.openstack.org/juno/i
aunchpad.
Thanks and have fun!
Cheers
James
[0]
http://reqorts.qa.ubuntu.com/reports/ubuntu-server/cloud-archive/kilo_ve
rsions.html
- --
James Page
Ubuntu and Debian Developer
james.p...@ubuntu.com
jamesp...@debian.org
-BEGIN PGP SIGNATURE-
Version: GnuPG v2
iQIcBAEBCAAGBQJVMWnPAAoJ
what dnsmasq is configured to send on
the network node. You may want to restart neutron-dhcp-agent on the network
node and see if that resolves it.
James
From: Geert Willems
Sent: Wednesday, April 8, 2015 5:55 AM
To: openstack@lists.openstack.org
Subject: [Ope
do you need to worry about terminating that
network off a router. It's simply isolated.
Hope that helps,
James
From: Mike Spreitzer
Sent: Wednesday, April 8, 2015 12:28 PM
To: openstack
Subject: [Openstack] [neutron] how to use multiple external networks?
Hello OpenStack Community.
.
I would like to ask for comments on how to insert a hostname into to an
instance using cloud-init.
.
I am using a pool of assign IP addresses that have hostnames assigned in
DNS.
.
Thanks In Advance.
.
James Buckett
IBM Cloud Consultant
IBM Cloud Software Services
>> Mailing list:
>> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
>> Post to : openstack@lists.openstack.org
>> Unsubscribe :
>> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
>>
>
>
> __
guest
password ?
regards
James R. Fleet
Innovative Solutions Technology
484 Williamsport Pike #135
Martinsburg, WV 25404
888.809.0223 ext.702
On Thu, Mar 26, 2015 at 12:14 PM, Wilson Kwok wrote:
> Hi all,
>
> I just installed Horizon and I can see login page, but can't logi
-d 10.239.0.11/32 -j nova-compute-inst-25
James
> On Mar 18, 2015, at 1:37 PM, mad Engineer wrote:
>
> I am having issue troubleshooting iptables rules.
>
> How can i identify which chain belongs to which instance..
>
> i can see nova-compute-inst-X but i am not able
config file argument set? This would need to be
changed in the upstart script of the respective agent. There may be other
arguments that need to change as well. I don't have a setup in front of me.
James
On Mar 4, 2015, at 11:23 PM, Akilesh K
mailto:akilesh1...@gmail.com>> wrote:
VLAN network, there is nothing currently in
place to tag the traffic accordingly, be it OVS or a eth2.x interface in br-ex.
The 'external_network_bridge' option in l3_agent.ini plays a part in this as
well. The 'net-show' output would help me deduce what your intentions were and
g
ng
Neutron port with “neutron port-list | grep 27dd1b25-62”.
James
> On Mar 4, 2015, at 3:03 PM, Mitchell Chen wrote:
>
> Hi All,
>
> I am struggling with not being able to ping the router gateway. I am able to
> ping from router to the router gateway (172.29.105.101) and r
t-update
bzr lp-propose
This will generate a merge proposal on launchpad that my team will review.
Cheers
James
[0] https://wiki.ubuntu.com/ServerTeam/OpenStack
- --
James Page
Ubuntu and Debian Developer
james.p...@ubuntu.com
jamesp...@debian.org
-BEGIN PGP SIGNATURE-
Version
precedence over the
default SNAT behavior.
By setting enable_snat to false, your traffic is being forwarded out of the
router as the fixed IP of the instance.
James
On Jan 21, 2015, at 8:15 AM, Chinasubbareddy M
mailto:chinasubbaredd...@persistent.com>>
wrote:
HI all,
I would l
Launchpad.
Thanks and have fun!
Cheers
James
--
James Page
Technical Lead, Ubuntu Server and OpenStack Team
Ubuntu and Debian Developer
james.p...@ubuntu.com
jamesp...@debian.org
___
Mailing list: http://lists.openstack.org/cgi-bin/mailman/listinfo
Hi Uwe,
What leads you to believe it’s defective? I think with the right output and
config files we can figure out what’s missing.
James
> On Jan 15, 2015, at 3:14 PM, Uwe Sauter wrote:
>
> Bump
>
> Noone to comment on this approach? Am I missing something or is this the
to them so that they could create
multiple “flat” networks in Neutron. To me, this defeats the purpose of having
Neutron manage tagging and I don’t recommend it.
Let me know if this didn’t address your questions.
James
> On Jan 13, 2015, at 8:14 PM, Ross Lillie
> wrote:
>
> All,
On Jan 7, 2015, at 1:08 AM, varun bhatnagar wrote:
> I am deploying OpenStack (Juno) on SLES-11.3 and want to use VMware as
> hypervisor instead of QEMU/KVM.
> I was going through the documentation
> http://docs.openstack.org/admin-guide-cloud/content/nsx_plugin.html and I
> could not find a
On Jan 6, 2015, at 12:56 AM, ppnaik wrote:
> I have a multi node setup of openstack juno on centos 7. After I instantiate
> multiple VMs and check the nova-compute.log on compute nodes it shows a
> negative value for free disks even though the the physical system has a lot
> of free memory
T
ou want to post them
somewhere.
James
From: Chinasubbareddy M [chinasubbaredd...@persistent.com]
Sent: Thursday, January 01, 2015 6:26 PM
To: James Denton; openstack@lists.openstack.org
Subject: RE: [Openstack] [juno][DVR]
Hi James,
If I try with out –-name, this is
| 00b1617b007d41b7aa777e0c97afdccc |
+---+--+
James
From: Chinasubbareddy M [chinasubbaredd...@persistent.com]
Sent: Wednesday, December 31, 2014 5:06 AM
To: James Denton; openstack@lists.openstack.org
Subject: RE
ittle bit.
James
From: Chinasubbareddy M [chinasubbaredd...@persistent.com]
Sent: Saturday, December 27, 2014 2:52 PM
To: openstack@lists.openstack.org
Subject: [Openstack] [juno][DVR]
Hi,
Can you please guide me for configuring the DVR in juno?
Referred the foll
1 - 100 of 167 matches
Mail list logo