pinkdot wrote:
@Than
Thanks for the feedback.
I assume you run LMS Repack?
What nas do you have. Thanks for the info.
Verstuurd vanaf mijn Transformer met Tapatalk
Yes running LMS 7.9.0 Repack on a DS411+II
Than's
usc95 wrote:
So I formatted with the tool you recommended and I used the disk imager
you recommended but got the same result:
18072
I am not sure what to do now. Please help.
Well, like Giza I don't use a monitor for installation, so I would
support his approach.
If you have a keyboard
Find out the ip address of the pi. i would go to the router ui to find
it. .normally this is at 192.168.1.1
then when you have the pi ip address type that in the browser and see if
it brings up the max2play ui.
Most people don't go via the tv ui so not sure if what you're seeing is
correct or
usc95 wrote:
First let me say I have never used the command line and I have ZERO
linux experience. I am able to download the image and expand it on a
micro sd card for my Raspberry Pi 2. When I boot it up it goes through
the process and stops at a line showing max2play login:. It never
doctor_big wrote:
Are you sure you're pointing to the correct website? Sometimes your
browser can try to be helpful and guide you to the www. version of a
site.
Also, is the pi hardwired to your router via Ethernet?
Jason
This is a good point, if using the IP address make sure to
Hi Philippe
Tested with v0230a5 but after changing the uncompressed setting to wav
from pcm, the track will play, and the Uniti will display the correct
stream info, ie wav, but won't advance to the next track. Logs are
attached for a 24 bit wav file and 16 bit flac file. After resetting the
marflao wrote:
I donwloaded pinkdot´s LMS package.
the package can´t be installed (see below).
Hello,
Did you add the repository to your Package Center, or did you download
it direclty from my website?
It is best to add the repository first to the Package Center.
See the post of mar
philippe_44 wrote:
But you are very right that with the non plugin, the exit was a full
graceful one, but it takes many seconds before it happens for (normally)
a limited benefit. I think adding a UPnP stop on that forced exit mode
will solve the problem
I agree when people aren't doing much
OK...after deleting the Syno LMS package I donwloaded pinkdot´s LMS
package.
But once I confirmed the settings (see following pic)
18076
the package can´t be installed (see below).
18077
Any tip what I need to do?
Thanks in advance.
Cheers.
philippe_44 wrote:
Would you mind trying with 2 tracks with different codecs and then with
the same codec but setting the handle next track to disable ?
log 1: A 24bit wav followed by a 16 bit flac, player handles next track
to 'yes', uncompressed format to 'wav'. Track didn't advance.
log
What is the current repo url ???
Been offline for a week or so ...
Touch - Muse M50 EX TPA3123 T-Amp Mini - Acoustics Q10 speakers
Logitech Radio
Logitech UE Smart Radio
Raspberry Pi + Squeezeplug LMS + Squeezelite
Cubieboard + Debian 7 + LMS 7.8.1 + Squeezelite - Soundwave SW100
bluetooth
epoch1970 wrote:
EDIT: Man in a van posted while I was writing-up. I think he has some
good points, there ;)
Well I know zilch about Max2Play, but here I see good news and bad news
(well done w/ the console snapshot, btw)
Code:
The possibly bad:
usc95 wrote:
I am not sure what to do now. Please help.
Well I know zilch about Max2Play, but here I see good news and bad news
(well done w/ the console snapshot, btw)
Code:
The possibly bad:
Network interface Plugging Daemon... skip eth0 ...done
wlan0: error
philippe_44 wrote:
I remember that and I think it was because there was an incosistency
between 2 places where you put version number: in the repository xml
file and in the directory of the plugin itself, there is a file named
install.xml that includes the version number as well. At the
PasTim wrote:
I agree when people aren't doing much testing, such a delay might seem
unnecessary. However, if you are testing various things, it is too easy
(at least for me) to get the whole system into a mess and have to start
again. A graceful stop would seem a useful way of preventing
Umm, isn't that a per-player setting in LMS? Or is that being applied on
the whole group based on the master?
---
learn more about iPeng, the iPhone and iPad remote for the Squeezebox
and
Logitech UE Smart Radio as well as iPeng Party, the free Party-App,
at penguinlovesmusic.com
*New: iPeng
I usually keep almost all my player's playlists sync'd so that I can
pick up where I left off anywhere in the house. I don't sync power state
or volume though. Now I have two Radios set as left and right speakers
in the bedroom and I want to control them as if they were one player but
keep them
bpa wrote:
From LMS point of view there is no difference between the Somafm stream
and the HLS stream. So the problem lies in either the HLS stream or
ffmpeg or perhaps some of the ffmpeg parameters used to play the HLS
stream.
edit:
The URL does not play for me with either ffmpeg or
Will this work in windows 8.1? To further demonstrate my ignorance,
what do I need to do with Ipv6 and avahi if I am using windows? A
quick google suggests that might be specifically for linux but I really
don't know. Sorry for my ignorance.
Change request
---
learn more about iPeng, the iPhone and iPad remote for the Squeezebox
and
Logitech UE Smart Radio as well as iPeng Party, the free Party-App,
at penguinlovesmusic.com
*New: iPeng 8, the Universal App for iOS 7 and iOS 8*
will this work with mac os x?
Scott
bruinboy's Profile: http://forums.slimdevices.com/member.php?userid=62436
View this thread: http://forums.slimdevices.com/showthread.php?t=100379
Thanks a lot disaster123! Unfortunately I don't see any of my players in
iThingies. Here's what tail server.log file looks like:
Code:
[15-05-22 07:24:07.7483]
Plugins::ShairTunes2::Plugin::playerSubscriptionChange (132) request=client new
client=Schreibtisch
usc95 wrote:
Will this work in windows 8.1? To further demonstrate my ignorance,
what do I need to do with Ipv6 and avahi if I am using windows? A
quick google suggests that might be specifically for linux but I really
don't know. Sorry for my ignorance.
I'm sorry Windows isn't
Repo URL:
http://raw.github.com/disaster123/shairport2_plugin/master/public.xml
BTW: at first I thought this might be a problem, as it would re-direct
to a https URL, and LMS fails to fetch https URLs on many systems. But
as this usually is lack of IO::Socket::SSL, failure to download your
Thank you all for your assistance. My expectation of how this was going
to work simply did not match how it was designed. I finally got to the
web ui simply by inputting the ip address of my raspberry directly into
my browser. I took a look at my Ipeng and max2play shows up and I am
able to
Hi pinkdot,
all was done via DSM's package center (settings = package sources =
add = name location).
But the Installation worked only after i changed the trust level as
described in my earlier post.
After that everything works like a charm
SBT works again the music is back again.
Here we go.
biggest changes:
- working covers / artwork
- working metadata like title, album, artist, duration...
- rework of socket reading and header parsing
- skipping and play works faster
- working only with LMS 7.8 or newer
Repo URL:
Thanks - I experienced the same on my player and this is due to the fact
that wav files requires a header that includes the full file size and I
don't know it in advance so I simply put a large number and close the
connection when I reach the end. Some players do not like that and, as
long as
@flysurfer:
The latest version of max2play seemed to prevent the 3rd party spotify
plugin from working on my devices.
Please advise.
And is there a easy way to downgrade?
Scott
bruinboy's Profile:
pippin wrote:
Umm, isn't that a per-player setting in LMS? Or is that being applied on
the whole group based on the master?
Yeah, it is, but as far as I know it applies to the whole group. So (I'm
assuming) if I set that for the second bedroom Radio it will come on
when any other player is
Sounds like another CR for 7.9
---
learn more about iPeng, the iPhone and iPad remote for the Squeezebox
and
Logitech UE Smart Radio as well as iPeng Party, the free Party-App,
at penguinlovesmusic.com
*New: iPeng 8, the Universal App for iOS 7 and iOS 8*
pippin wrote:
sounds like another cr for 7.9
cr?
SUE
-If you're happy and you know it turn the volume up and 'blow it out'
(http://www.last.fm/music/The+Features/Exhibit+A/Blow+It+Out).-
1 Touch | 2 Booms | 2 Radios | 1 Duet | 1 SB2
HP Proliant N54G | Logitech Media Server 7.8 | iPhone
LenMaroko wrote:
Aha,
Stream plays out of the box in Safari.
Can I do something to test ??
Does it play OK using ffmpeg (i.e. transcode into a file) from a
command line ?
bpa's Profile:
33 matches
Mail list logo