devgcl wrote:
> Is there a way to do that?
Yes. InguzEQ will load convolver files:
39614
Put a copy of your convolver file in the linux equivalent of Windows'
-%programdata%\InguzEQ\Impulses- folder, restart server, and InguzEQ
should find it.
Hi,
I tried REW and am really happy with the eq it did to each channel.
I want to apply the rew convolver (wav) files into my LMS (7.9.X)
installed on Linux (Fedora)
Is there a way to do that?
Note, The eq does not help as the filters require PEQ if I wanted to go
through the eq route.
Thank you
devgcl wrote:
> Thanks for the reply. I checked the mp3 and WMAL settings in my
> custom-conf file and its exactly the same as per your config.
> As another side issue, I can see the equalizer working for WAV or FLAC
> files types but it has no effect for Spotty (Spotify) streaming. Spotty
>
Thanks for the reply. I checked the mp3 and WMAL settings in my
custom-conf file and its exactly the same as you sent out.
While playing around more, I can see the equalizer working for WAV or
FLAC files types.
However, it has no effect for Spotty (Spotify) streaming. Spotty plays
too loud and
unfortunately no effect, windows and Qnap...
schwimma's Profile: http://forums.slimdevices.com/member.php?userid=63428
View this thread: http://forums.slimdevices.com/showthread.php?t=116119
thanx very much!
i will keep you informed
schwimma's Profile: http://forums.slimdevices.com/member.php?userid=63428
View this thread: http://forums.slimdevices.com/showthread.php?t=116119
schwimma wrote:
> Thanks , could you please help me with the file preference?
>
> after disable AAC, i got the new dsp queue in spotty, but no effect
Sure, you may well have a lot of repetition (depending upon how many
players you have setup), but this is the pattern
Spotty FLAC
Thanks , could you please help me with the file preference?
schwimma's Profile: http://forums.slimdevices.com/member.php?userid=63428
View this thread: http://forums.slimdevices.com/showthread.php?t=116119
It should work with Spotty - I have just tested it on my server.
foxesden's Profile: http://forums.slimdevices.com/member.php?userid=56286
View this thread: http://forums.slimdevices.com/showthread.php?t=116119
yes, one on windows one on an Qnap (ts233 with OS 5.01)
but now it also works on qnap..maybe an hickup, after reinstall the
plugin 3 times it works.
one question left: is it possible to combine it with spotty?
since there is no inguz DSP File queue in the File format section for
spotty?!
schwimma wrote:
> Hi
>
> should this plugin work on ARM LMS (qnap) installation?
>
> was able to installe it on LMS 8.4 , qnap device but changes in the EQ
> does not have any effect.
>
> Sorry if i should know this but i did not find any hints in serveral
> threads
>
> it works on
devgcl wrote:
> Hi,
> Thanks heaps for making the plugin workable again. Possible to show how
> the custom-config file should look like per your update above(+any other
> file changes). I cant play WMAL files hence need to apply the fix.
> I cant make the changes in the Advance menu even after
Hi
should this plugin work on ARM LMS (qnap) installation?
was able to installe it on LMS 8.4 , qnap device but changes in the EQ
does not have any effect.
Sorry if i should know this but i did not find any hints in serveral
threats
thaNX
Hi,
Thanks heaps for making the plugin workable again. Possible to show how
the custom-config file should look like per your update above(+any other
file changes). I cant play WMAL files hence need to apply the fix.
I cant make the changes in the Advance menu even after disabling Native
for
New version
I have made a small technical change to make it simpler to update the
custom conf template that is generated. v0.9.39
These now live in a script called TemplateConfig.pm
I am not suggesting that anyone should need to edit this, but if you
understand how the custom.conf setup works
Thank you.
Zombie's Profile: http://forums.slimdevices.com/member.php?userid=25009
View this thread: http://forums.slimdevices.com/showthread.php?t=116119
___
plugins mailing
Zombie wrote:
> Anyway, have I understood it correctly that Flatness only works if the
> is a Room Correction filter activated?
> How about the Quietness? Does it only work with an activated Room
> Correction filter or generally regardless of other settings?
"Flatness" controls the degree to
Is the original Inguz thread removed? Can't find it, last post wasn't
that long ago.
Anyway, have I understood it correctly that Flatness only works if the
is a Room Correction filter activated?
How about the Quietness? Does it only work with an activated Room
Correction filter or generally
Paul Webster wrote:
> The "changes" section in the XML need a to close it.
>
> FYI regarding the checksum - if you are working on Windows then there is
> (was?) a Microsoft tool called fciv (File Checksum Integrity Verifier -
> downloadable from their site)
> fciv -sha1 filename
>
> Also - I
The "changes" section in the XML need a to close it.
FYI regarding the checksum - if you are working on Windows then there is
(was?) a Microsoft tool called fciv (File Checksum Integrity Verifier -
downloadable from their site)
fciv -sha1 filename
Also - I sometimes use a Windows Explorer
Paul I have added a changes section to repo.xml
foxesden's Profile: http://forums.slimdevices.com/member.php?userid=56286
View this thread: http://forums.slimdevices.com/showthread.php?t=116119
Paul Webster wrote:
> The new XML file looks OK to me.
>
> One thing to note ...
> if you put in a section then LMS will list the contents when
> offering to upgrade - which can be a good way to highlight things to
> users who are about to upgrade.
> It is not visible from the LMS web
The new XML file looks OK to me.
One thing to note ...
if you put in a section then LMS will list the contents when
offering to upgrade - which can be a good way to highlight things to
users who are about to upgrade.
It is not visible from the LMS web interfaces after the update is
installed.
Zombie wrote:
> It is a change from plugin.xml to repo.xml?
Correct. There are some conventions around how the xml files; their
versions an the zip files are named. I was unaware of this as I had been
building off very old code. There is no new functionality here, it is
purely in order to get
It is a change from plugin.xml to repo.xml?
Zombie's Profile: http://forums.slimdevices.com/member.php?userid=25009
View this thread: http://forums.slimdevices.com/showthread.php?t=116119
Zombie wrote:
> Noticed now that the replay gain function is gone. Uninstall EQ and it
> is back.
> Didn't notice that earlier today.
Inguz isn't touching the replay gain. Where I have had problems with
replay gain it has been one of these things that have caused it.
1 - source file which has
I am trying to get the plugin aligned to LMS plugin standards. This has
meant that I have changed the file name of the plugin from plug.xml to
repo.xml. Therefore the file that you need to point to is now
https://raw.githubusercontent.com/Foxenfurter/SqueezeBoxEQ/main/repo.xml
If you have any
foxesden wrote:
> Hi - Judging from what you have said, I assume you are running on
> windows.
> Given that you have all the files created, it looks as though the plugin
> is actually running
> What front end are you using, is it Material skin? If it is - you will
> need to go into settings and
Apesbrain wrote:
> In your system, where is LMS running?
On a NAS in the next room. The only difference was that I changed the
sensitivity from -16 to -18 and -17. Now it's back to -16 and random
tracks seem the same level
Zombie wrote:
> While playing tracks from my NAS yesterday there was some 10 dB
> difference between some tracks. I uninstalled EQ and the difference was
> gone.
I'm pretty sure RG works for me. InguzEQ changes the audio data in
every sample, but tags are left untouched and RG is a tag. It
Apesbrain wrote:
> What do you mean by "the replay gain function is gone"?
While playing tracks from my NAS yesterday there was some 10 dB
difference between some tracks. I uninstalled EQ and the difference was
gone.
Zombie wrote:
> About presets...will the server restart with the latest used preset
> before shutdown?
InguzEQ remembers its last settings on server shutdown/restart.
Zombie wrote:
> If so, is it possible to make it player-based instead?
Each player has its own InguzEQ settings file. When
Noticed now that the replay gain function is gone. Uninstall EQ and it
is back.
Didn't notice that earlier today.
Zombie's Profile: http://forums.slimdevices.com/member.php?userid=25009
View this thread:
Sry for serial posting. :)
Concerning keeping the last preset, if I understand right it is
server-based, not player-based.
If so, is it possible to make it player-based instead?
I have a preset with 9 dB lift at 60 Hz (room thing), but that would be
quite overwhelming for a Boom or SB Radio.
foxesden wrote:
>
> /var/lib/squeezeboxserver/prefs/InguzEQ on linux.
I find the Settings folder and the log here:
/share/CACHEDEV1_DATA/.qpkg/LogitechMediaServer/SlimServer/prefs/InguzEQ$
´
Difficult to find with the NAS browser, must use SSH, but convention is
convention.
About presets...will the server restart with the latest used preset
before shutdown?
It seems it does but the active preset is not shown in the field Load a
preset
It would be "reassuring" to see the active preset in the window after a
restart. :)
I have adjusted some dips and peak in the freq
Actually I moved the settings location as of this month in order to be
more compliant with LMS conventions. Michael Herger suggested that I
could re-locate the Presets and logs folder to
C:\ProgramData\Squeezebox\prefs\InguzEQ
and "typically"
/var/lib/squeezeboxserver/prefs/InguzEQ on
Apesbrain wrote:
> Exactly.
Great. I suspect I must have one brain cell bouncing about in that empty
head of mine. ;)
Zombie's Profile: http://forums.slimdevices.com/member.php?userid=25009
View this thread:
Zombie wrote:
> And I must change to smth lower, like
> -20?
Exactly.
Apesbrain's Profile: http://forums.slimdevices.com/member.php?userid=738
View this thread: http://forums.slimdevices.com/showthread.php?t=116119
Apesbrain wrote:
> If you see CLIPPING+ in the log, then you need to reduce the Inguz
> "gain" value. You do this in the following file:
> "C:\Program Files
> (x86)\Squeezebox\server\Bin\MSWin32-x86-multi-thread\InguzDSP.exe.config"
I use the Linux x64 I think, but can't find any .config file
Zombie wrote:
> 1. I used the "transistor radio" setting and I could hear clipping of
> the signal, which is worrying
The Inguz playback log will tell you if your signal is clipping. It is
located on your server PC at:
"C:\ProgramData\InguzEQ\Log.txt" (Note that ProgramData is a hidden
Windows
I use Replay Gain and all files were recently analysed and tagged with
Foobar (did it better than MP3Tag). I use fixed volume on the
streamer/DAC (non-SB).
I'll check the peak tag for the files that had distortion. Easier to
hear in transistor radio mode, otherwise it is masked.
I don't have MQA
pjc8151 wrote:
> Fully willing to admit I'm likely an idiot and missed something obvious
> - I installed the plugin for the first-time using yesterday's
> instructions. Server is LMS 8.3.0 is fully up to date running on Windows
> 10. The problem is I'm not seeing any menu items under the player
Zombie wrote:
> Got it working on the big system now, but there were three "issues":
> 1. I used the "transistor radio" setting and I could hear clipping of
> the signal, which is worrying
> 2. When random play plays a Tidal track (flac), the EQ settings are
> inactivated. (Didn't test if they
Got it working on the big system now, but there were three "issues":
1. I used the "transistor radio" setting and I could hear clipping of
the signal, which is worrying
2. When random play plays a Tidal track (flac), the EQ settings are
inactivated. (Didn't test if they were activated again if
Fully willing to admit I'm likely an idiot and missed something obvious
- I installed the plugin for the first-time using yesterday's
instructions. Server is LMS 8.3.0 is fully up to date running on Windows
10. The problem is I'm not seeing any menu items under the player extra
settings (I'm
foxesden wrote:
> NB there is nothing wrong with what C3PO is doing, just that it and
> Inguz don't play nicely together.
I don't know what C3PO is and haven't seen it installed.
It struck me that there might a conflict between what UPnP does and the
LMS. If the LMS is set to send out FLACs to
The flac file is the one I would have expected to work, as that is what
I focussed on getting right. Are you using any other plugins, for
example C3PO as this also generates a custom.conf file and that
sometimes wins the battle of the custom.confs ;) I just tried it now and
sure enough is I
The stream was Radio FIP Rock, 252kbit/s CBR AAC (HLS), played on a SB
Boom. I could adjust he sound with the 5-band equaliser. Changes took
effect after stopping and restarting the stream.
Later I tried to play FLACs from the NAS through the UPnP plugin in LMS
and I have set the stream to PCM,
It would be good to have some details of the file types that you were
playing both from the radio and from your NAS, and what player you were
directing it too.
It may well have been playing the radio streams and bypassing the Inguz
altogether, or it could have been an issue with the setup vs
Tested this morning and it worked nicely on two radio streams, but when
I played files on my NAS just now, nothing happened.
A uninstall and I could play files from NAS again. Good to see it worked
with smth at least :)
I would like some suggestions for new features.
A few I have noted are
Add player friendly name to config screen
add some starting presets - Transistor Radio :) , and all-clear
add a facility to upload impulse responses - no idea how I am going to
do that!
Player level defaults. The idea is
I have noticed a couple of issues that I will be fixing.
1 - runtime filters do not appear to be cleared out. I found 5 GB of
20,000 + files in my old settings files. I will add a bit of
housekeeping when the plugin starts - this will only affect the temp
folder.
2 - *if you are using the
Installation was quick, I didn't even noticed it happened.
Did some adjustments on my Boom and it seems to work.
You are a genius!
Thank you for you hard work!
Now I have to figure out how to get the measured compensations into the
plugin :)
foxesden wrote:
> 3 - test with an extreme and horrible eq Setting. I set the balance hard
> left and bump up the bass massively. Sound should be boomy and be skewed
> to the left channel.
For testing, I use a preset I named "Transistor Radio". It looks like
this:
[image:
I have re-written large chunks of the plugin perl scripts to be
compliant with squeezebox install conventions, and should be much easier
to install going forward.
This means that the binaries should be distributed in the install zip
and "live" on ..\Cache\InstalledPlugins\Plugins\InguzEQ\Bin.
Btw, here's the log from the evening of the 21 Oct before I gave up
(Part 1):
https://drive.google.com/file/d/1O8yIWwsBmKKm5b6Kz_oLvIHw9qfHnndh/view?usp=share_link
Zombie's Profile:
Thank you. I used the docker before QLogitechMediaServer saved me :)
https://forums.slimdevices.com/showthread.php?108702-QLogitechMediaServer-for-Qnap-with-QTS-4-2-or-higher-and-x86_64-I686-X86-support-!=Qlogitech
Instructions for setting up containers on QNAP are here.
https://www.qnap.com/en/how-to/tutorial/article/how-to-use-container-station
foxesden's Profile: http://forums.slimdevices.com/member.php?userid=56286
View this
I had a look at the documentation for QNAP today and also how people
have got LMS running on it. I decided to try a new tack as doing a one
off install for hardware I don't have access to is probably going too
far down the rabbit hole. So I noticed that you can run docker images on
the QNAP and
I didn't run the picore ph script yesterday because I already had the
files on disk. I also modified it to change the folder locations.
Zombie's Profile: http://forums.slimdevices.com/member.php?userid=25009
View this
Thanks for the info.
Sounds like picore-player in that respect, but it was relatively easy to
get Inguz running on Picore-player, much more difficult to make it
persist after a restart. It sounds like it may have been running
earlier, but without a persisted config, this means it would have
The LMS is running in a QNAP app called QLogitechMediaServer. Earlier it
ran in a container. The QNAP LMS app is documented in this forum.
When I started playing music this morning it didn't play, just jumped
from song to song, but no sound. Like it behaved during the early
installation
Sounds frustrating, I will have a dig around on this server, ideally I
can find a setup that I can run as a virtual machine and see if I can
crack it,
I have started a re-write of the whole thing, but it stalled last April,
because I had to cover another manager's role at work, but he is back
Nope. No files or folders in InguzEQ.
I have been using a player all night. Apart from the restarts.
Zombie's Profile: http://forums.slimdevices.com/member.php?userid=25009
View this thread:
and presumably you have selected a player and tried to play. But get no
music?
and when you check the /usr/share/InguzEQ folder you don't see any
additional folders or files?
foxesden's Profile:
It exists: admin@192.168.10.150:/usr/share/InguzEQ$
Zombie's Profile: http://forums.slimdevices.com/member.php?userid=25009
View this thread: http://forums.slimdevices.com/showthread.php?t=116119
So the main scripts around the plugin are behaving themselves. I think
the issue now is that /usr/share/InguzEQ has not been created.
I don't know how you created the folder, but the steps should be
something like this
cd /usr/share
sudo mkdir InguzEQ
-- you may get prompted for your password
foxesden wrote:
>
>
> 38946
I don't have this. It is empty. That's the error.
I save a change in EQ as Test. It is saved but doesn't show up in the
list of settings.
But in the folder
/share/CACHEDEV1_DATA/.qpkg/LogitechMediaServer/SlimServer/prefs/plugin
the conf file points to a
I added the picore-setup.sh script specifically for users running on
picoreplayer on the raspberry pi. This is because the setup is more
complex there as the all the system folders are loaded into memory at
startup and get wiped each time, which means the preferences and
executables would be
I do sudo chmod 777 InguzDSP in usr/share but get:
chmod: InguzDSP: No such file or directory
I don't understand.
Zombie's Profile: http://forums.slimdevices.com/member.php?userid=25009
View this thread:
Not execute the picore-setup.sh
Should the .1 files also be there or are they just double dnloads?
Zombie's Profile: http://forums.slimdevices.com/member.php?userid=25009
View this thread:
Install the plugin from the plugin screen on settings page first. My
folder looks like this - you shouldn't need to tweak anything
38947
Download the InguzDSP program and Config File and make the program
runnable using chmod command
38948
Create the Settings folder InguzEQ and make the
So the actual plugin I install (the one on the plugin page) is not
important at all? Or should I install it, too?
Zombie's Profile: http://forums.slimdevices.com/member.php?userid=25009
View this thread:
The way LMS handles plugins is quite complex, and is not my expertise
either.
So when you build a plugin it is just a zip file and usually contains a
perl script that runs on the server web page(s) that allows you to
interact with the script. There are a few more supporting files that you
may
Hello
Sry to be a blockhead. I'm trying to get what is what here.
I install a plugin, but is that the actual program and configuration
file or just a shell with a layout?
What is the name of the "program" and "its configuration file"?
I put the InguzDSP and its .dll in
**There are 2 separate folders that are important here.
1) the folder that the program and its configuration file need to go
into.
With the information that you have posted, I would expect that the
folder
/share/CACHEDEV1_DATA/.qpkg/LogitechMediaServer/SlimServer/Bin/x86_64-linux
If this is
Nothing works.
"on this install the program files (executable) should be installed
here
/usr/share/squeezeboxserver/Bin/x86_64-linux"
What does the above mean, what program files (executable)?
"cd /usr/share/squeezeboxserver/Bin/x86_64-linux (or equivalent
folder)"
What does equivalent folder
Great. I'll try tonight and hope for the best. Thank you.
I assume I execute the commands above in the SSH window.
Zombie's Profile: http://forums.slimdevices.com/member.php?userid=25009
View this thread:
I have been experimenting with an Ubuntu install on a virtual machine
using virtualbox, and managed to get squeezeboxserver working with
Inguz. It is a bit sticking plaster and string at the moment.
First off the build wasn't broken, it was my command line test that was
wrong.
on this install
OK, thank you.
It's no inconvenience, I appreciate your effort.
Zombie's Profile: http://forums.slimdevices.com/member.php?userid=25009
View this thread: http://forums.slimdevices.com/showthread.php?t=116119
the pdb is a debug file created by the compiler, you don't need to
install it.
I have had a check on the build this morning and it looks like something
is broken as clean win64 build on my PC doesn't output sound either. I
should have tested this before posting a new build version up. So don't
I asked in the LMS forum and got this answer:
"Every OS handles files slightly different. QNAP being a NAS, not a
standard Linux, means it's likely to do things differently than your
desktop OS. See Settings/Information in LMS for the relevant paths."
Thank you for taking your time.
I have admin rights and with SSH I see it all, I think.
Here are the dirs on the NAS:
- The plugin dir where it installs the main files:
admin@192.168.10.150:/share/Logitech Media
Server/SlimServer/Cache/InstalledPlugins/Plugins/InguzEQ$
- The sox dir which is
It might be worth checking against the instructions JohnB wrote for
installing on linux (Ubuntu)
https://forums.slimdevices.com/showthread.php?109921-Inguz-EQ-DRC=929246=1#post929246
There is a pdf listing the manual instructions for installing, so you
can check the file locations there. I
Bit of checking
on linux the applicationsdata folder should always be /usr/share, and
this is where the script looks to write settings to under a folder named
after the app = InguzEQ. Permissions should be set by the script.
If the QNAP does not have a /usr/share folder than this may be a
Zombie wrote:
> I'm in deep waters now, but I change the contents of the picore-setup.sh
> file to:
>
> 2022-10-18 13:31:35 (5.03 MB/s) - 'InguzDSP.dll.config' saved [214/214]
>
> ln: /SlimServer/InguzEQ: No such file or directory
> ln: /SlimServer/Bin/x86_64-linux/InguzDSP: No such file or
foxesden wrote:
> I have compiled a linux x64 version and it is available here
> https://github.com/Foxenfurter/inguz-InguzDSP/tree/Upgrade2Net6/publishLinux-x64
I'm in deep waters now, but I change the contents of the picore-setup.sh
file to:
#!/bin/sh
#
# picore-setup.sh
#create missing
foxesden wrote:
> I have compiled a linux x64 version and it is available here
> https://github.com/Foxenfurter/inguz-InguzDSP/tree/Upgrade2Net6/publishLinux-x64
Great! Thank you. Will test it tomorrow.
Zombie's
artatgray wrote:
> Hi all,
>
> I've seeing the following in the log for InguzEQ, its logging level I've
> set to "Debug:
>
> (261) InguzEQ: jiveTopMenu
> [22-10-11 05:27:19.5525] Plugins::InguzEQ::Plugin::debug (261) InguzEQ:
> 0=Bass
> [22-10-11 05:27:19.5526] Plugins::InguzEQ::Plugin::debug
Zombie wrote:
> Thanks, I have a TS-251+
I have compiled a linux x64 version and it is available here
https://github.com/Foxenfurter/inguz-InguzDSP/tree/Upgrade2Net6/publishLinux-x64
foxesden's Profile:
foxesden wrote:
> What QNAP box are you using? I maybe able to figure out what combination
> to build from that and upload a version.
Thanks, I have a TS-251+
Zombie's Profile:
Zombie wrote:
> Ping!
> Anyone know where I can find files for other OSs than Win and Debian to
> get Inguz working?
> I think I need for Linux x86 (QNAP)
What QNAP box are you using? I maybe able to figure out what combination
to build from that and upload a version.
Hi all,
I've seeing the following in the log for InguzEQ, its logging level I've
set to "Debug:
(261) InguzEQ: jiveTopMenu
[22-10-11 05:27:19.5525] Plugins::InguzEQ::Plugin::debug (261) InguzEQ:
0=Bass
[22-10-11 05:27:19.5526] Plugins::InguzEQ::Plugin::debug (261) InguzEQ:
1=Treble
[22-10-11
Hi all,
I've seeing the following in the log for InguzEQ, its logging level I've
set to "Debug:
(261) InguzEQ: jiveTopMenu
[22-10-11 05:27:19.5525] Plugins::InguzEQ::Plugin::debug (261) InguzEQ:
0=Bass
[22-10-11 05:27:19.5526] Plugins::InguzEQ::Plugin::debug (261) InguzEQ:
1=Treble
[22-10-11
Ping!
Anyone know where I can find files for other OSs that Win and Debian to
get Inguz working?
Zombie's Profile: http://forums.slimdevices.com/member.php?userid=25009
View this thread:
I figured out that the directories weren't correct and found the
corresponding directories in my NAS and pasted the config and dll file
into all three suspects, arm, i386 and x386.
The file types showed InguzDSp, but didn't play. Removed the dll and the
config from all folders and added them to
OK, so I ran sh picore-etc.sh in its directory and a dnload started.
The directory structure is not the same so I need to find which files to
copy to my structure...
The file types are not configured as the pic above, but greyed out. The
balance test doen't change anyting.
Welcome to Smart
Hello
I installed the plugin but I am at loss with the DSP stuff.
How do I do if my LMS runs on a QNAP NAS, TS-251+?
Zombie's Profile: http://forums.slimdevices.com/member.php?userid=25009
View this thread:
veracocha wrote:
> there is no .dll file in the file you gave?
That's correct; just an EXE and a CONFIG file.
In the same folder where you copied these two files, do you have a
FLAC.EXE and a SOX.EXE?
Apesbrain's
1 - 100 of 111 matches
Mail list logo