Re: Stumped! 5300 and Ram Doubler

>I'm totally stumped. My 5300c simply refuses to work with Ram Doubler. It >has its stock amount of real RAM (16MB soldered in), an upgraded HD (IBM >1GB), no PC cards, running MacOS 8.1. Whenever I try to install Ram Doubler >(version 8.01 or 9.01, or 8, or 9) I get a "bus error" immediatel

Re: dead 1400: ac adapter?

[EMAIL PROTECTED] wrote: > In a message dated Thu, 29 Aug 2002 02:00:47 +, [EMAIL PROTECTED] writes: > > After much frustration, I narrowed it down to the adapter. ... the plug itself was >bad Just to second this, I am fighting with an adapter cord for a 5300 that is shorting out at the

Re: The Disappearing Files

Yes, they were OSX updates. I'm going to try again in a few minutes (high speed access). And I'm going to copy twice - once to the HDD partition and the second time to a Zip disk. You're probably right about Stuffit deleting files. I changed the settings. George --- Andrew Kershaw <[EMAIL PROTECT

Re: SCSI addresses scheme?

Is this going to be a daily exercise? Dick Johnson wrote: > I just acquired two hard drives that use jumpers for the SCSI address. It's > been years since I set one up and I can't find the code scheme for > addressing the units. > > Can someone d

Re: 3400c Nightmare

on 30/08/02 03:08, R Farrington at [EMAIL PROTECTED] wrote: > My PowerBook 3400c decided to start this thing where when I shut it down, it > starts right back up. Of course this had to start happening right before I > decided to sell it. > > It is really really annoying, I suppose it would be gr

Stumped! 5300 and Ram Doubler

I'm totally stumped. My 5300c simply refuses to work with Ram Doubler. It has its stock amount of real RAM (16MB soldered in), an upgraded HD (IBM 1GB), no PC cards, running MacOS 8.1. Whenever I try to install Ram Doubler (version 8.01 or 9.01, or 8, or 9) I get a "bus error" immediately wh

Re: powerbook 3400 Please help

--- poohbear2u2 <[EMAIL PROTECTED]> wrote: > I have a powerbook 3400 that has been upgraded to a > G3. I have been > having trouble with it starting up lately but today > when I turned it > on it froze while it was booting up. I unplugged it > but now it won't > boot up at all. So I'm a

Re: AC adapter for pb3400 & pb1400

How much are you asking fot the G3/233Mhz Processor & G3/333Mhz Processor? Thanks, Josh _ MSN Photos is the easiest way to share and print your photos: http://photos.msn.com/support/worldwide.aspx -- PowerBooks is sponsored

Wallstreet battery, one more time...

Well, I ran Battery Reset one more time, shut down, reset the power manager, zapped the PRAM, and now the battery is toast again. No lights, nothing. ARGH! Ran Battery Reset again, did some voodoo dancing, still no lights, no functioning battery... *sigh* Drew -- Having graduated (with a

Re: SCSI addresses scheme?

In a message dated 8/29/02 8:43:39 PM, [EMAIL PROTECTED] writes: >I just acquired two hard drives that use jumpers for the SCSI address. >It's been years since I set one up and I can't find the code scheme for >addressing the units. > >Can someone direct me to a source for the information? Web p

3400c Nightmare

My PowerBook 3400c decided to start this thing where when I shut it down, it starts right back up. Of course this had to start happening right before I decided to sell it. It is really really annoying, I suppose it would be great if it was a server or some thing... :) -- PowerBooks is sponsore

SCSI addresses scheme?

I just acquired two hard drives that use jumpers for the SCSI address. It's been years since I set one up and I can't find the code scheme for addressing the units. Can someone direct me to a source for the information? Web page or whatever? Thanks. Dick -- PowerBooks is sponsored by

Re: powerbook 3400 Please help

Anne: I don't have a clue. My 3400 sits around a lot and last time I started it up I got nothing. I did the Power Manager reset and then I think I zapped the PRAM on startup and it came back to life. Zapping PRAM is done on startup by holding down the Option-Apple and P and R keys at the

Re: PB 190 & VST Zip drive

> Anybody have drivers that'll see this drive so I can use it normally? > ~ > > Thanks, > Jesse I've been using Iomega Driver 6.0.6 with my 190cs and a VST Zip drive I bought on eBay. Is that what you've tried? I got it from Iomega's web site and I believe it was the latest driver when I do

Re: The Disappearing Files

Are you sure that they finished downloading completely before you deleted them? Sometimes interrupting the download will cause the browser (or your download manager) to automatically delete the incomplete file... Probably not what you wanted to hear, but I can think of no reason why any file

PB 190 & VST Zip drive

Anybody have drivers that'll see this drive so I can use it normally? In the absence of drivers, I have to make sure the PB has a Zip disk in the drive while it's booting in order to use the drive. Iomega's drivers can't see the drive, VST says it's not compatible with the 190, despite the fact

The Disappearing Files

Hi, I dl'd some .dmg files in .bin format from Apple's site. It seems that upon putting the PB 3400 to sleep, the files that were still compressed disappeared. The Stufflt version active at the time was 6.01. I checked to see if they were there before sleep mode, and they were or so I thought. I

Re: SpeedDoubler 8 conflicts

Message-Id: <[EMAIL PROTECTED]> > From: [EMAIL PROTECTED] > Subject: Re: SpeedDoubler 8 conflicts > Date: Wed, 28 Aug 2002 16:01:38 GMT > > > Is it possible to get Speed Doubler tho it's bee dropped by Connectix? > > -- > > Mike Amato > > And ditto for Ram Doubler? I'm going nuts trying to

Wallstreet battery, again

Well, I did a quick Google search for "PowerBook G3 battery" (seeing if someone has taken one apart). I found a bunch of references to "PowerBook G3 Series Battery Update 1.0" from Apple. The software is no longer available (only thing close to that is "Battery Reset 2.0." Well, here's a s

Wallstreet battery take-apart?

Anyone ever taken apart a Wallstreet LiIon battery? I peeled back the two plastic stickers (on top and on bottom)... I dunno, for some reason I thought there might be screws underneath. Anyway, I found that the bottom of the battery had lots of long cracks lined up with the spaces between bat

Re: SpeedDoubler 8 conflicts

-Original Message- From: victoria brandon Sent: Tuesday, August 27, 2002 4:38 PM To: PowerBooks Subject: SpeedDoubler 8 conflicts? > Has anyone encountered conflicts with SpeedDoubler 8 under OS8.x? Thanks to all for your advice, and help getting the 8.1.2 update: all is now well though

Re: AC adapter for pb3400 & pb1400

on 29/08/02 18:22, Anthony Vo at [EMAIL PROTECTED] wrote: > Hi listers, > Can I use the same ac adapter, interchangeable, for pb 3400 or 1400 since > the shapes and output watts (45) are the same? I have done with no problem. Best wishes Malcolm Cornelius - The Powerbook Fanatic www.pbfanati

AC adapter for pb3400 & pb1400

Hi listers, Can I use the same ac adapter, interchangeable, for pb 3400 or 1400 since the shapes and output watts (45) are the same? Anthony -- PowerBooks is sponsored by and... Small Dog Electronicshttp://www.smalldog.com | Enter To Win A | -- Canon Power

Re: powerbook 3400 Please help

Thanks for the advice Gary. I tried what you suggested but no luck..it doesn't make the startup chime just a click..I have tried it with just battery and with the A/cAny other sugguestions? Anne --- "Gary D. Adams" <[EMAIL PROTECTED]> wrote: > You say it doesn't start up at all.

Re: powerbook 3400 Please help

You say it doesn't start up at all. Is this on A/C or battery? Does it make the startup chime? Have you reset the Power Manager? The first thing I would do is reset the Power Manager. Unplug it from A/C, pull the battery, and depress the small reset button right beside the ethernet board in t

powerbook 3400 Please help

I have a powerbook 3400 that has been upgraded to a G3. I have been having trouble with it starting up lately but today when I turned it on it froze while it was booting up. I unplugged it but now it won't boot up at all.Any suggestions or helpful hints..I really need to get it up an