Hello,
While many will not miss Internet Explorer, I don't know of a
replacement that will do as good a job for ebay auctions.
Now, when I download the web page for an item, IE downloads a copy of
the page, with an item description and with the url. Later, to check
the auction progress, I
Hello,
I was wondering if anyone could please tell me which version of the
ipod/s would work with a 400 mhz G3 Pismo laptop, 512 mb ram, firewire
and usb 1.
Thanks.
--
PowerBooks is sponsored by http://lowendmac.com/ and...
Small Dog Electronicshttp://www.smalldog.com | Enter To Win A |
Hello,
Are some laptop hard drives just inherently noisier than others- i.e.
when the computer or a program starts up and the drive is accessed
there are audible noises heard.
However, other drives just seem to have a quiet hum that they are working.
Are those that are noisier dying? Thanks.
Bill,
On my 3400 I used:
i) a combination Global Village 56k modem and ethernet pcmcia card.
It worked well, and provided both capabilities. Also, the installer
contains all necessary drivers for the modem and ethernet functions.
ii) I used an Orinoco card for wireless and there are appropriate
Hello,
I have just acquired a Wallstreet (292 mhz, 64 mb ram, 5 GB hd with
OS 9.1) which has a yellow tinge along the bottom of the screen for
about half an inch. Is there a cure, besides a new screen?
Also, the Re-set of: Shift, Control, FN and Power does not work and I
have had to pull the
Hello,
People have advised that the Fujitsu Laptop 18GB 4200RPM hard drive,
Model MHJ2181AT was not a good choice to install as it runs hot. Is a
20 gb 5400 rpm Seagate laptop hard drive an advisable choice for a
powerbook 3500?
Thanks.
--
PowerBooks is sponsored by http://lowendmac.com/
Advice appreciated.
I have replaced the hard drive and now it seems to run very hot
(i.e.- too uncomfortable for a lap). The heat is felt near the hard
drive, and everywhere on the underside of the case. Does this sound
normal?
I replaced the original 5 gb hard drive on my Kanga (3500 with 160
Hello,
I have acquired a secondhand Club Mac TEAC external CD recorder,
(with a scsi connector cable and terminator) and attached it to my
powerbook 3400.
Roxio Toast 5.14 Lite recognises the CD to be copied, but the CD
recorder does not detect correctly a Benz 52x CD-R (700 mb/80min) CD.
Is
Advice please:
I have a CD drive from a powerbook 3400/ 3500 laptop. The CD drive
is working but the plastic area which you grasp to pull the drive
from the laptop is loose at one end and I fear it will break off with
the drive still inside the laptop.
Could someone please tell me how this
Advice appreciated-
I need a calendar creation program that works with OS9. I bought The
Print Shop but it won't run on a 3400 but installs fine on an iMac. I
think the screen size is too small for the program to run.
Is there something that functions like Microsoft Publisher to create
I'd like to make a further clarification of my original post, as many
of you have kindly suggested remedies, but they have already been
tried and not worked and you might have a further idea of I clarify:
Hello,
I have a VST Zip drive for the powerbook 190/5300/3400. When I put
it in the
Hello,
Could someone please tell me the url for downloading the updaters for
the US version of Appleworks 6? Do the updaters have to all be
installed in order, or will the last one combine all of the previous
changes? Appleworks 6 should run on a 3400 with OS 9.1, shouldn't it?
Thanks.
--
Hello,
I have a VST Zip drive for the powerbook 190/5300/3400. When I put it
in the expansion bay of the 5300 running 8.6 it works fine. When I
put it in the 3400 running 9.1, it causes the powerbook to start up
only to a gray screen with a black cursor and not start up any
further and I have
I would appreciate advice for setting the display screen contrast on
a powerbook 5300. The usual buttons for Brightness and Contrast on
the right side do not darker the screen as much as I would like
before continued pressing of them makes the screen go black with not
enough contrast or
I have a powerbook 5300 with OS8.1 and 24 mb memory (8 mb + 16 mb ram
card). I have SpeedDoubler 8.12 installed. Due to the relatively
small memory, I have purchased RamDoubler2. However, I wondered if
there were updaters that need to be installed for it to work with
OS8.1? I can't find the
Questions re Global Village pcmcia modem and OS 9.1
I cannot get the Remote Access control panel to accept the settings
for the Global Village pcmcia modem. It continually sys the modem is
using the default settings, even though in configurations there is
another setting to select.
Secondly,
Hello,
I have a powerbook 'Kanga' and a Global Village 56k pcmcia modem/ethernet card.
I can save the settings for the modem card in the modem control panel
and name it, but Location Manager and Remote Access dialogue box
errors both say that the modem is using the Default configuration. It
Hi,
I have a powerbook 5300 with a zip drive in the expansion bay that
works fine. When I tried it in my 3400 it froze the machine at start
up to a gray screen with an arrow cursor. When I put in the CD rom it
started up fine.
Can anyone tell me what could cause this problem?
Thanks
--
Hello,
Could anyone please tell me if there is software that would run on a
powerbook 3400 that works like Microsoft Publisher 97?
I'm after something whereby the program can provide a monthly
calendar with dates well into the future. Also, clip art can be
inserted into the calendar.
Thanks.
Page 54 of the Powerbook 190 User manual says (in the middle of the
page) that Your powerbook is not internally terminated.
That is why I have used a pass through terminator before the scsi
device and an active terminator on the device. I had problems with
multiple zip disks appearing on the
Hello,
I saw an post about a powerbook 15 gb hard disk, but the seller said
it would only fit the newer machines and not the 5300, 3400, etc.
Could someone please tell me what has changed in the newer hard drive
design? I know there are varying heights, but that has not made a
difference in the
Subject: RAM for 190/cs
can 5300 RAM work in a 190/190cs?
I have found that 5300 ram does often work in a 190, although it may
still be labelled for a 5300. The reverse is also often true.
However, there are occasions when specific brands of ram have not
been transferable. Therefore, it is
Hello,
I'm trying to install OS 9.2.1 then 9.2.2 on a Kanga powerbook but
each time I try to shut down the command is not completed.
I have downloaded the International English version of Mac OS 9.2.1
and Mac OS 9.2.2. as directed by the website. However, each time I
click on the link for the
Hello,
Could anyone please tell me which version of Apple MRJ software to
install on a powerbook 5300 with 24 mb ram?
I had upgraded to Apple MRJ 225, but read on the list that it needed
40 mb of real ram. Also, I had installed Internet Explorer version
5.17, but wonder if I need to install an
Hello,
When trying to send an email message I get an Open Transport error
message, #709. However, the email is received by the recipient. Can
anyone tell me what this number for the error means?
Thanks.
--
PowerBooks is sponsored by http://lowendmac.com/ and...
Small Dog Electronics
Hello,
Could anyone suggest the possible cause of a lag with typing
appearing on screen and also with the scroll bar on a powerbook 3400?
Do I need to take off the trackpad to somehow check the connection?
--
PowerBooks is sponsored by http://lowendmac.com/ and...
Small Dog Electronics
Hello,
I have installed an Apple brand powerbook 3400 128 mb ram module in a
Kanga. It does not show up when the system is started.
I want to use this ram in another powerbook 3400, not this Kanga, but
do not want to post it if it is not working. Is there a way to tell
if a ram module is
Hello,
What version of Internet Explorer would be the best web browser to
use on a powerbook 5300 (56 mb) with system 8.1? I already have
Icab, Wannabe and Netscape 4.08, but know that some sites will
require Internet Explorer.
Thanks.
--
PowerBooks is sponsored by http://lowendmac.com/
Hello,
I am running a powerbook 5300 and a 3400 side by side. The 3400
screen looks more dimmed, less contrast, less bright. Besides the
Brightness adjust button above the keyboard, are there other obvious
changes to make in the Control Panels?
Thanks.
--
PowerBooks is sponsored by
Hello,
Could someone please confirm that the 128 mb ram module for the
powerbook 3400 would also work in the Kanga?
Thanks.
--
PowerBooks is sponsored by http://lowendmac.com/ and...
Small Dog Electronicshttp://www.smalldog.com | Enter To Win A |
-- Canon PowerShot Digital Cameras start
Hello,
Several have posted queries regarding the Lacie FM Radio. Looking at
the box , it says Requirements are: any desktop Mac. Not guaranteed
for use with portable computers.
I have not been able to get it to play without choppy sound on my
5300 nor on my 3400. I think it is due to the lack
Any advice please:
I want to try to install OSX onto my Kanga using XPostFacto. I have a
20 g hd partitioned into 2. I have OS 9.1 and 9.2 each on a partition
at present.
I have an OSX 10.1 CD, but the instructions say that if OSX is
installed on an older powerbook partitioned drive it must be
Hello,
When I turn on my Kanga, the speakers make an unclear start up sound.
I had thought this was due to the motherboard, but that has recently
been replaced.
I have seen a 3400 speaker grill for sale and wonder if that could be
the source of my problem.
Where are the speakers located? Would
kaldav [EMAIL PROTECTED] wrote:
Remember, not all Kangas came with the combined ethernet/ modem card.
Mine just has the modem card and so I use a 56k pcmcia modem card
which would improve the speed from the original 33.6 anyway.
First I've ever heard of Kangas with a modem-only card. I _have_
Hello,
Should I be able to install Adaptec Toast 4.12 on a Kanga running OS
9.1 without the install causing the system to freeze?
--
PowerBooks is sponsored by http://lowendmac.com/ and...
Small Dog Electronicshttp://www.smalldog.com | Enter To Win A |
-- Canon PowerShot Digital Cameras
Hello,
I would like to check the procedure to reset the PRAM settings and
the Power Manager on the 3400.
a. do I take out the battery before re-setting the PRAM? are these
instructions right?
To Re-set PRAM
1. Shut down powerbook, making sure Caps Lock is not on. Unplug AC adapter.
3. Press on
Subject: trackpad causes windows to disappear?
--
From: VidaVerde [EMAIL PROTECTED]
There was a nasty virus that did this, but that was way back in sys
7. something or other. Don't know if it's still an issue.
--
From: Howard R. Katz [EMAIL
Hello,
Could anyone help to diagnose a problem whereby moving the mouse over
a window causes it to disappear? This occurs even when I don't click
the left box or make any choice to close it, just the movement over
the top of the window causes the closure. This happens when I am
using the
Hello,
Could someone please provide advice re the Appletalk settings with a
powerbook 3400 and system 8.6 or 9.1.
The 3400 Manual on page 118 says that to use Remote Access software
(I presume for internet connections) 'Make sure that AppleTalk is
turned on in the Chooser'.
However, to use the
Hello,
Could someone help to diagnose a problem on the powerbook 3400 where
one is typing into a program dialogue box or typing an email, (occurs
with different applications) but the typing letters appear very
slowly, long after the keys are pressed?
Does this sound like a zap the PRAM and
Hello,
I would like to check the procedure to reset the PRAM settings and
the Power Manager on the 3400. (Does one first take out the battery
before re-setting the PRAM? Are there any errors in these
instructions before I try them? Thanks for advice)
To Re-set PRAM
1. Shut down powerbook,
Hello,
I have been able to get usb to work with system 9.1 with a zip drive
and a usb fan!!
However, when installing my Ixla digital camera software, the
installer removed all the USB system extensions I had installed, then
when I plugged it into the Macally usb card, it froze the system.
Hello,
I saw a Macally usb pcmcia card offered on ebay where the seller said
it worked with OS9. However, I didn't get the card and was wondering
if anyone got the Macally card to work with OS9?
With the older systems, is there a key to hold down at startup to
get the choice of two
partitions
Hello,
I have a few questions re the powerbook 3400:
a. Has anyone been able to get the Macally usb pcmcia card to work
with system 9.1?
b. What keys do you hold down at startup to get the choice of which
partition on the hard disk to start up from?
c. Does anyone have a suggestion for a
Hello,
Could someone please tell me how to get the usb extensions installed
on my Kanga powerbook running system 9.1? I installed the hacked usb
drivers from the Froho site, but the powerbook froze.
I want to use a usb pcmcia card.
Thanks.
--
PowerBooks is sponsored by http://lowendmac.com/
Hello,
I want to ship a powerbook 3400 from Australia to the US. Should I
leave the battery inside it to ship, or send it separately? Inside
it's heavier and there is a possibility the computer could start up,
but shipped separately that right side of the powerbook doesn't have
support for the
Any advice appreciated:
When I changed the hard drive in my powerbook 5300, the battery was
in, the keyboard out and the powerbook started up. I pulled out the
battery so it stopped running.
Now when I plug in the 5300 , the machine starts before I press the
power key. I have held in the re-set
Hi,
When quickly trying to change the hard drive in my powerbook 5300, I
started with the battery in. I already had the keyboard out when the
powerbook started up. I pulled out the battery so it stopped running
and continued to change over the hard drive.
When I finished and plugged the 5300 in
I don't know what version system 7.6.1 needs to run, but I know
SpeedDoubler has version 8.12 for system 8.6.
--
PowerBooks is sponsored by http://lowendmac.com/ and...
Small Dog Electronicshttp://www.smalldog.com | Enter To Win A |
-- Canon PowerShot Digital Cameras start at $299 |
Hi,
Could someone please tell me which box to tick for the type of
compression to use for a Global Village 56k modem/ethernet pcmcia
card?
Thanks
--
PowerBooks is sponsored by http://lowendmac.com/ and...
Small Dog Electronicshttp://www.smalldog.com | Enter To Win A |
-- Canon PowerShot
HI,
Could someone please tell me where I can get a copy of the latest
Powerbooks Digest, as I deleted it inadvertently with all of the
Microsoft spam I have been getting.
Thanks.
--
PowerBooks is sponsored by http://lowendmac.com/ and...
Small Dog Electronicshttp://www.smalldog.com |
Hi,
Could someone please tell me which box to tick for the type of
compression to use for a Global Village 56k modem/ethernet pcmcia
card?
Thanks
--
PowerBooks is sponsored by http://lowendmac.com/ and...
Small Dog Electronicshttp://www.smalldog.com | Enter To Win A |
-- Canon PowerShot
Could someone please answer some more powerbook 3400 questions:
1. I see from the Service Manual that the in the Environmental
section on page 43, it says the shipping, non- operating altitude is
15,000 feet maximum and I wanted to send it by Fed Ex from Australia
to America. Does this mean
Hello,
I have a few questions about a powerbook 3400.
1. I wish to replace the latch and have the part. I found pictures to
assist with hard drive replacement at www.genchan.com however there
is nothing about the screen assembly. Is there a website giving
instructions for taking apart the
Hi,
There was a question asked : Subject: USB
From: D. Wakefield (DTP etc!) [EMAIL PROTECTED] Date: Fri, 3 Oct 2003
How did all of you get your shaved cardbus usb adapters to work on
the 3400's. My 9.1 machine refuses with this exchuse: USB Adapter
Card Support is not supported on this
Hi,
1. I have a powerbook 5300 and bought a used Global Village 56k pcmcia modem.
When I open the GV icon on the desktop, I can choose a compression type for
the modem: MNP4, V.42, MNP5, V.42bis, MNPIVEC, etc.
Which should I choose (what do they stand for?) or should I click on 'None'.
2. I have
Hi,
1. I have a powerbook 5300 and bought a used Global Village 56k pcmcia modem.
When I open the GV icon on the desktop, I can choose a compression type for
the modem: MNP4, V.42, MNP5, V.42bis, MNPIVEC, etc.
Which should I choose (what do they stand for?) or should I click on 'None'.
2. I have
Hello,
Can anyone tell me how to solve this problem?
1) I have JPEG View 3.3 (for 68040 and PPC machines) on my powerbook 5300.
When I double click it to open, the dialogue box says 'JPEG View cannot be
opened because it cannot be found'. (I have rebuilt the desktop to try to
solve this)
2. I
HI,
I am seting up a powerbook 5300 to use a GV 56k pcmcia modem and a
Stylewriter 2500 printer.It had been working well with neither connected.
For the last two days I get the chimes when I try to start up with both
devices connected and the first time I got the sad Mac face.
It then shows a
Hello,
Could anyone provide the url where I might find a manual for the Color
Stylewriter 2500 printer?
I need to work out how to change the feed system for paper and letters. There
are two levers- one on the side, and one above the ink cartridges, so I need
some instructions.
Thanks.
--
60 matches
Mail list logo