on 6/29/03 9:49 AM, Jay Snyder at [EMAIL PROTECTED] wrote:
> I had 10.2.2 on a Lombard, and then when I try to upgrade it to 10.2.4, it had
> problems booting.I think that 10.2.2 might be the best bet for older
> Powerbooks.
>
> J.
>
I can't even get 10.2 on it as it is now. I had 10.2.6 on
ooks" <[EMAIL PROTECTED]>
> Subject: Re: PowerBook G3 Series & Mac OS 10.2.6 Brightness problem
>
> All right, Jay here's one for you to ponder. I am trying to install OS X
> 10.2 on my WallStreet. The installation gets 2/3 of the way through and then
> the screen ei
>This is got me stumped. I have even switched hard drives. The last time I
>tried to install and the PB did it again. This time I can't even mount the
>hard drive. It is being resurrected as I type this by Norton Volume Recover.
>DiskWarrier couldn't even see it. It mounted with SystemWorks.
Diakw
into OS9 (8 might work too), then boot into OSX, and that should fix it
>>> until you powerdown again.
>>>
>>> If it isn't remembering the date & time, and also has trouble with powerup
>>> from battery, then your PRAM battery is probably bad.
>&g
ry is probably bad.
>>
>> J
>>
>>
>>
>>>
>>> From: Jean-Philippe Pellet <[EMAIL PROTECTED]>
>>> Date: 2003/06/28 Sat AM 05:32:54 EDT
>>> To: "PowerBooks" <[EMAIL PROTECTED]>
>>> Subject: PowerB
>>
>> From: Jean-Philippe Pellet <[EMAIL PROTECTED]>
>> Date: 2003/06/28 Sat AM 05:32:54 EDT
>> To: "PowerBooks" <[EMAIL PROTECTED]>
>> Subject: PowerBook G3 Series & Mac OS 10.2.6 Brightness problem
>>
>> Hi,
>>
>&g
then your PRAM battery is probably bad.
J
>
> From: Jean-Philippe Pellet <[EMAIL PROTECTED]>
> Date: 2003/06/28 Sat AM 05:32:54 EDT
> To: "PowerBooks" <[EMAIL PROTECTED]>
> Subject: PowerBook G3 Series & Mac OS 10.2.6 Brightness problem
>
> Hi,
>
Hi,
I recently acquired for $200 a PowerBook G3 Series (Rev. I) and I
decided to install Jaguar on it. 10.2.0 ran fine, but after I upgraded
it to 10.2.6 with the combo updater, I began having the following
problem: when I startup the Mac, the screen brightness is OK as long as
I can see the s