g it
through QGIS or through the command line?
Did I get all that correct?
On Sat, Sep 28, 2024 at 10:33 AM Even Rouault
wrote:
> Andrew,
>
> $ ldd /bin/qgis.bin | grep gdal
>
> libgdal.so.34 => /lib/x86_64-linux-gnu/libgdal.so.34 (0x7a0581a0)
>
> But I'm no
do with that information.
So now I'm thoroughly confused. I tried running
$ sudo find -name gdalinfo
./home/andrew/.local/share/Trash/files/apps.10/gdalinfo
./home/andrew/src/gdal/build/apps/gdalinfo
./usr/local/share/bash-completion/completions/gdalinfo
./usr/share/bash-completion/completions/
to redirect QGIS towards a different
installation of GDAL?
Thanks!
On Wed, Sep 18, 2024 at 5:04 PM Richard Greenwood <
richard.greenw...@gmail.com> wrote:
> What do you get from
> which -a gdalinfo
> You might have two versions installed.
>
> On Wed, Sep 18, 2024, 4:0
valid or
recognized data source" error.
It was my expectation that if MrSid was enabled within GDAL through the
command line, then QGIS would be able to read it too. Is there an
additional configuration that I'm missing?
Thank you,
Andrew Plowright
___
an update available.
Is, version 3.38 available for Mac Intel? I assume this is a glitch in the
download website?
Regards
Andrew
___
QGIS-User mailing list
QGIS-User@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Hi there Richard,
The simple array format that your data is in means that it can be read
by GDAL using the ESRI HDR driver:
https://gdal.org/drivers/raster/ehdr.html#raster-ehdr
This just requires a sidecar file named /clt02.hdr/, that contains the
information for QGIS to interpret the binary
Hi Uwe,
I've not attempted to deal with this issue before, but it occurred to me
that you might be able to use two labelled layers (duplicates) one
locked to each position, using the labelling priority weighting to apply
the ranking. the only issue is that in sparse data areas both labels
mig
Hi Christian,
If the subscript data is just numbers you can have a look at this post:
https://gis.stackexchange.com/questions/181287/achieving-super-or-subscript-graticule-labels-in-qgis-composer-windows
As this is a custom expression function it is applicable to labels as well.
Cheers,
Andy
Hi Michael,
Here are some instructions to do exactly what you are asking that I
recently wrote for someone else (you are not alone!):
The ESRI ASCII grid format is supported by QGIS, and will load as a
raster if you drag an .asc file over the map canvas. The further
complication with the gri
stage,
python is not finding the packages "qgis.core.Qgis" == module not found
Thanks in advance,
Andrew
On Wed, 8 Jun 2022 at 17:12, Ujaval Gandhi
wrote:
> Yes. Configuring system paths to point to qgis libraries will allow native
> python to work with pyqgis. I have a complete
ssume not at
this point in time as that doesn't align with local development tooling
that is based on venv.
Things I am hoping to see:
Yes - but you need to set a PATH or PYTHONPATH
Yes - but need to see . in requirements.txt
No - impossible, fill your boots
Thanks for read
Thanks Chris.
Looks like that's for schema changes, and I need data changes. But thanks
all the same.
Cheers Andrew
p.s. we use Flyway https://flywaydb.org/postgresql for managing schema
changes. It's actually the reason we don't want QGIS randomly dropping and
recreating tables
/docs.qgis.org/3.22/en/docs/user_manual/processing_algs/qgis/database.html#postgresql-execute-sql>
algorithm,
but that requires me to hand code all the sql statements in my script.
Do-able, but not elegant.
Advice would be greatly appreciated.
Thanks for reading,
Andrew
isn't documented
Hi Andrea,
Yes, thank you! I only tried it about 2 hours ago and the second example
worked perfectly.
I'm sure the first works, I could not create a valid Uri based on the
documentation alone.
Thank you for your help and checking in and apologies for the slow reply.
Cheers
Andrew
On M
ectorLayer('
https://services.arcgis.com/quV9d0y7GW2PJkRl/arcgis/rest/services/rpt_spv_str_restr_prod_ogcfl/OGCFeatureServer',
"layer_name", "OAPIF").isValid()
For reference, this is QGIS v3.16.11. Also, this DOES work when I add this
URL as a WFS / OGC API to the
Hi All,
Seeking advice here...
The GeoJSON spec supports nested json within properties, see example #2 @
https://www.rfc-editor.org/rfc/rfc7946#section-1.5
It would appear that QGIS 3.16 is unable to load this as layers. I'm highly
skeptical about how much support there is for nested JSON not ju
Hi All,
We have a WFS layer that QGIS v3 appears to be caching and I would like to
disable this. The experience is, when we zoom in we don't get additional
detail - since we limit the number of features to 20K.
Thanks in advance,
Andrew
p.s. is this a common caching pattern/feature of QGIS
Thanks Bernhard,
I'm afraid we are quite well indexed. I'd also expect slow performance on
the map rendering if that were the problem.
Unless of course there is some client side data caching from postgres that
I am not aware of?
Thank you & Cheers,
Andrew
On Wed, 6 Oct 2021 at 1
ingle text attribute value on all selected
features only. Fairly simple, but the UI elements we need appear to be in a
world of pain.
Thanks in advance,
Andrew
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user
t to the main map only the center of both maps is
kept in sync. The scales are so far out of sync between the two
[image: image.png]
Help would be much appreciated,
Many thanks in advance
Andrew
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
Li
input does showup...
https://github.com/ahhughes/pyqgisorama/blob/main/CreateArcGISFeatureLayer.py#L106
Any help would be appreciated
Thanks in advance
Andrew
On Wed, 25 Aug 2021 at 21:27, Etienne Trimaille
wrote:
> A QgsProcessingOutputVectorLayer will understand you are returning a
> Qgs
found here:
https://github.com/ahhughes/pyqgisorama/blob/main/CreateArcGISFeatureLayer.py#L132
Help would be great as I am very new to QGIS and have spent a fair bit of
time trying to fix this without reaching out.
Thanks in advance
Andrew
___
Qgis-user
-by-feature and have more control over what is happening
during the execution.
Many thank in advance
Andrew
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lis
table_d.i_cant_believe_its_not_butter_blah
Q: What would the expression be to find the field ending with "_blah" and
use/return that fields value (as the symbology's categorical value)? I will
never know what the field is called, just that it always ends in _blah.
Big thanks in
Thank you - worked perfectly!
I would still like to know how I can programmatically create "something"
that feeds the N (merged) layers into the model without having to create
them in the project.
Thanks again.
On Thu, 15 Jul 2021 at 17:47, Alexandre Neto wrote:
> Hi Andrew,
&g
s input, it can create the layers itself (in
code/config) and feed them into the merge processor and output the single
merged layer?
Thanks in advance
Andrew
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailma
Thanks Marco,
You've answered my question, so thank you. For reference, I've never see
this in any sql rmdbs.
Some examples my help the community, hopefully I will be able to contribute
sooner or later.
Thanks again!
Andrew
On Wed, 7 Jul 2021 at 17:43, GMAIL wrote:
> This is
(but I want the above
expression to work):
*"tag_service" IS NULL or "tag_service" = "service"*
Help would be much appreciated,
Thank you
Andrew
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user
that line.
something like:
closest_point(geom_from_wkt(geomdistance('lines','$geometry',10)) , $geometry)
Andrew
‐‐‐ Original Message ‐‐‐
On Thursday, October 17, 2019 11:51 PM, Christoph Jung
wrote:
> Hello list,
>
> Does QGIS has a function to cal
Hi Gary,
Looking at your snippet of the hdr file, the dataset appears to be an ENVI
raster see:
https://www.harrisgeospatial.com/docs/ENVIHeaderFiles.html
These rasters can be opened by QGIS (via GDAL as Richard states). The relevant
notes are here:
https://www.gdal.org/frmt_various.html#EHdr
gner and use them in QGIS.
Andrew
‐‐‐ Original Message ‐‐‐
On Wednesday, February 20, 2019 5:29 AM, Kai Behncke
wrote:
> Dear users,
>
> I wonder if it`s possible to create own forms in Quantum GIS 3.4?
>
> I have found a couple of documentations how it`s possible in qgi
On 24/01/2019 12:48, Micha Silver wrote:
I'd like to see all plugins arranged in categories: Dev tools,
Hydrology, CAD, Classification, Vector tools, Web, etc...
The number of plugins is fast reaching the point where this is necessary.
Or make the existing tag system more visible when search
erage, sum, string length, etc.
I think the help covers the use pretty well, but if you run into trouble I can
give more specific help,
Andrew
‐‐‐ Original Message ‐‐‐
On Thursday, December 13, 2018 8:11 AM, Andrew Bell
wrote:
> I have spatial layer and non-spatial layer set up as a rela
I have spatial layer and non-spatial layer set up as a relation QGIS
3.4. The non-spatial layer is the child.
I'm trying create a display pop-up for the spatial layer that sources
attributes and values from the relation layer.
I can see the relation is an option in the expression dialog but at
Just to add that the equivalent dissolve tool in 2.18.25 completes
successfully on the data.
On 19/11/2018 14:47, Andrew Harfoot wrote:
I'm seeing very strange behaviour with a particular shapefile in QGIS
3.4.1. The data can be obtained here:
https://drive.google.com/f
I'm seeing very strange behaviour with a particular shapefile in QGIS
3.4.1. The data can be obtained here:
https://drive.google.com/file/d/1BPVnsUbJREYh6TvLM07GAzXMiMneHemN/view?usp=sharing
When I run the /Vector Geometry > Dissolve/ Processing tool on it, no
errors are raised, an output laye
Hi,
I'm finding big postgis tables slow to add to QGIS:
- this is when zoomed in to a small area with a spatial index on the table
- the tables are exclusively linestring (i know combinations result in
querying of the geometry types)
From the database side i can see that it's receiving a SELECT
be some little file
lurking somewhere.
But there may be a simple answer. Advice would be welcomed.
Andrew
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https
I'd agree, the aspect of a slope does not vary with it's gradient, and
the scale factor is only used to ensure that the gradient calculations
are made using consistent units in XY & Z.
Cheers,
Andy
On 11/10/2018 19:43, Nicolas Cadieux wrote:
Hi,
I use a z factor in slope and hill shade calc
there is a
workaround.
But I am only learning QGIS so I am probably asking much less of it than your
are.
Andrew Grant-Adamson
> On 28 Sep 2018, at 15:41,
> wrote:
>
> Anyone else has the problem of QGIS 3.2.3 on MacOSX (10.13.6) becoming
> unstable regularly.?
>
>
For circles of a specific size, one per input data point you'll need to
build your own using tools from the Processing toolbox:
1. Use the Buffer tool on the input points to 200m to create the circles
2. Use the Join attributes by location tool to attribute the circles
with counts and / or weig
Hello,
I am generating contours from drone deploy & trying to add on contour
interval labels on the vector in QGIS.
My current method for attempting this is:
- layer styling
- abc
- Single Labels
- Label with...
With no elevations option.
Thank you all in advance for the help.
_
which was working fine for a while. All I had done
leading up to this error was open a raster DEM file and try to extract
contours for the DEM. The extraction lagged out and I reset my laptop. I
have deleted an Reinstalled with no luck. Kind regards. Andrew
I am losing the Z axis on contour lines when smoothing or removing small
objects using the generalize plug in. This also happens when smoothing or
simplifying geometry.
My workflow is to extract contours from DroneDeploy, Then smooth and remove
small objects in QGIS then save as a DXF and open in
I enjoyed the related presentation - http://www.itopen.it/bulk/qgis3-server
any personal preference between NGINX with Python / FastCGI ?
--
Sent from: http://osgeo-org.1560.x6.nabble.com/QGIS-User-f4125267.html
___
Qgis-user mailing list
Qgis-user@lis
ock;\n$SOCKETS" ; done
sed -i -e "s@QGIS_SERVER_SOCKETS@${SOCKETS}@g"
/etc/nginx/sites-enabled/qgis-server-fcgi
Alessandro Pasotti-2 wrote
> On Thu, Jun 14, 2018 at 3:46 PM, andrew terry <
> andrew.terry@.co
> > wrote:
>
>>
>
> np, but please keep in mind tha
nt a tested working
> configuration you can have a look to:
> https://github.com/elpaso/qgis3-server-vagrant
>
> On Thu, Jun 14, 2018 at 3:34 PM, andrew terry <
> andrew.terry@.co
> > wrote:
>
>> Hi Alessandro,
>>
>> Thanks for the thought, i did include th
Hi Alessandro,
Thanks for the thought, i did include the xvfb install and config. Always
double check though and the status report is as follows - only just showing
as started as i booted the instance to check:
● xvfb.service - X Virtual Frame Buffer Service
Loaded: loaded (/etc/systemd/system
Hi,
I'm finding with QGIS 3.0.3 and NGINX using FastCGI, running on Ubuntu Bionic
that calls to a project appear to start a fresh session for every WMS request.
In the qgis logs I'm seeing the loading of the file and session started before
each WMS request log. In the nginx error logs I'm seein
ing 3D capabilities and
this may be a way to progress them.
All the best
Andrew
--
Sent from: http://osgeo-org.1560.x6.nabble.com/QGIS-User-f4125267.html
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinf
On 05/03/2018 08:20, Paolo Cavallini wrote:
Hi all,
I cannot recall an easy solution for this problem:
* clicking on a point
* adding azimuth an distance
* automatically creating a point, in a second layer, at the distance and
azimuth specified
* repeat the procedure, adding more point to the sam
Stefan, I set the scale from the status bar in QGIS. I haven't looked at
the QuickMapServices plugin, but I will if it may help.
My base-map is aerial photography, to it would be difficult to use vector
instead :)
--
Sent from: http://osgeo-org.1560.x6.nabble.com/QGIS-User-f4125267.html
_
Hi Ross, Did you resolve this? I have similar issues displaying geowebcache
aerial imagery in QGIS. Even when I set the scale to match any of gridset
levels the quality of the image displayed in QGIS is still poor.
Cheers
Andrew
--
Sent from: http://osgeo-org.1560.x6.nabble.com/QGIS-User
Hi Richard,
Have you had a look at the GDAL WMS Driver - this can be used with other
GDAL commands to connect to tile services and save out to a file based
format for offline use. Look at the OpenStreetMap TMS Service Example in
this page:
http://www.gdal.org/frmt_wms.html
Cheers,
Andy
On
Hi
I'm getting the error "Unsupported data source" when trying to load a
raster layer.
The console windows show no more information about what it doesn't like
about the file :-(
Photoshop and other image viewers are happy to display the images.
The files have all been created by GDAL (via a vrt)
need to do
very often.
Andrew
On Thu, Apr 20, 2017 at 11:18 PM, Reginald Carlier <
reginald.carl...@ingelmunster.be> wrote:
> Hi Richard,
>
> Yes my second shape has a subset of attributes of the first. In fact only
> one fieldname matches with the first shape.
> In fact
Hi Sarah,
I've used Maperitive (http://maperitive.net/) in similar situations to
download OpenStreetMap map tiles and store them in a local MBTiles
database, from where QGIS can load them very quickly!
Rough steps are:
1. Decide on your web mapping
2. Set the bounds using UI, or running this
Another option would be to do this in the DB Manager - ie use the SQLite
engine directly, but you would have to recouch your Field Calculator
expression as SQL.
Andy
On 01/03/2017 22:33, Randal Hale wrote:
Attribute! Used Field Calculator to split an attribute to get the
zipcode into a standa
I think this can be solved in two stages:
1. Given the transport network, source and destination locations, a
shortest path calculation run repeatedly should generate a series of
routes. Commonly these functions output the route in terms of a list of
the network sections to follow.
Options f
Untested, but (in 2.18 and possibly earlier) you can create Filled
Marker styles with a raster image fill, and the source of the raster can
be data driven. Worth a try?
Cheers,
Andy
On 11/01/2017 17:42, Josef Fürst wrote:
Dear QGIS users,
I am switching over more and more from ArcGIS to QGI
default value box and skip using the expression dialog.
Andrew
On Wed, Dec 21, 2016 at 1:32 PM, DelazJ wrote:
> Hi,
> Laurent, I can think about different ways you can test to tackle your
> issues, provided you have two spatial layers that overlap (and without any
> intermediate la
o a CRS
transformation on the feature.
Andrew
On Tue, Dec 20, 2016 at 3:03 PM, Laurent Bourlet wrote:
> Hi at all
>
> I'm a beginner in Qgis and i would make a dynamic spatialjoin.
> In fact , i have created a vector layer ( for example A) and i grab
> points in it when I
alues is large and variable, for instance:
correct vs incorrect
20243 sqm vs 612695 sqm
1333 sqm vs 721 sqm
Andrew
On Fri, Oct 14, 2016 at 7:51 AM, Carlos Cerdán wrote:
> Hi Nyall
>
> I'm afraid that 2.16 has still this issue. I've loaded an UTM-17 south
> layer (my zon
Regarding your second question, in QTDesigner you can change the default
buttonBox properties to include a "Save" or "Apply" button.
On Thu, Sep 15, 2016 at 8:17 AM, Tyler Veinot
wrote:
> Not having much luck with this, I managed to get the
> qgsRelationReferenceWidget to show me a list of addr
I saw a demo of the Crayfish plugin at the FOSS4G-UK conference earlier
in the week, and it provides 'time slider' functionality for netCDF
based data, plus additional tools such as video generation. Worth taking
a look?
Andy
On 17/06/2016 10:29, Régis Haubourg wrote:
Hi,
I need the communit
the description but it is less clean/user friendly and kind of
annoying.
Andrew
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: http://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis
thanks for your help and patience,
Andrew Mathews
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: http://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user
Andrew S. Mathews
Associate Professor
Department of Anthropology
Room 325
Ah, maybe you are using the simplified interface for processing? I just
noticed that you don't see all of the sink tools in the simplified
interface. Try switching to the advanced interface, at the bottom of the
processing panel.
Andrew
On Wed, Jun 1, 2016 at 1:38 PM, Andrew wrote:
Hi Alejandro,
What platform are you using? I don't think the problem is the SAGA
version, I can run Fill Sinks XXL tools using the OSGE4W 64-bit version of
SAGA, 2.1.2 with QGIS 2.8.9 and 2.14.3.
andrew
On Wed, Jun 1, 2016 at 5:25 AM, Alejandro Chamizo de Castro <
alecham...@gmail.co
I have tried to install a plugin opeNoise and have received the error
message
“Plugin installation failed:connection refused”
I have now found that the same problem is present when I try to upgrade
existing installed plugins or install any additional plugin
I’m running QGIS Essen 2.14.3 on a Win
How about creating some dummy geometry by appending a WKT string of the
appropriate geometry type to each CSV row, then that can be plotted,
allowing the db values to be read to generate a style.
Andy
On 19/05/2016 15:03, Lene Fischer wrote:
Hi,
Is there a workaround to import classificatio
Hi Simon,
Sorry for the confusion - GeoTiff is a standard for embedding the
georeferencing information within the tif image file. A GeoTiff will
usually contain the CRS information as well. A tfw file is an example of
a world file, not a GeoTiff. It is an alternative approach to conveying
geo
QGIS is configured into a non-earth or local CRS mode by doing the
following (in 2.14):
1. Turn off 'On the Fly CRS transformation' (Project > Project
Properties > CRS)
2. Ensure that the measurement ellipsoid is set to 'None / Planimetric'
(Project > Project Properties > General)
3. Set the c
If you want to fix it you can edit the grass module config file to get the
correct input. The file to edit should be:
~\.qgis2\python\plugins\processing\algs\grass7\description\r.water.outlet.txt.
In the text file you'll see the two parameters for easting and northing:
ParameterNumber|easting|East
Hey Tyler,
I don't know of a tool to downgrade a project, but the
"ImportLayersFromProject" plugin has worked for me to easily load the
compatible layers/styles.
On Fri, May 6, 2016 at 7:43 AM, Tyler Veinot wrote:
> Hello;
> Anyway to downgrade a .qgs file from 2.14.2 to a 2.8.8?
> I am running
Hi Simon,
Surely if your image is georeferenced, then it will have been done so to
a CRS (not necessarily a projected one though). However, if you don't
know the CRS (and it appears that QGIS cannot extract it from the
GeoTiff if it is prompting you), but you do know the georeferenced units
u
Hi Sarah,
In the Composer window you can change the size of the image so you can get
the whole map in a single image and at the correct scale. In the
"composition" tab change the paper preset to "custom" and you can set a
custom height and width.
On Fri, May 6, 2016 at 4:49 AM, Sarah Gregg wro
I have just posted a couple of unicode superscript and subscript
functions to GIS Stackexchange:
http://gis.stackexchange.com/questions/181287
Cheers,
Andy
On 18/02/2016 13:15, Claas Leiner wrote:
Hi,
With Unicode Characters is a good idea. As the code is implemented
directly in a QGIS-Exp
Hi Uwe,
If you can't use formatting tags, then possibly Unicode is your friend
here - have a look at characters U1D31 and U1D3A - superscript E and N
respectively. Using these should allow you to generate labels like this:
0234ᴱ or 345389ᴺ
Cheers,
Andy
On 16/02/2016 18:48, Nyall Dawson wr
Hi Robin,
Have you tried using the Value tool plugin as an alternative? I think it
predated the addition of the raster specific elements to the core
Identify tool, and offers greater functionality. I particularly like it
as it is a separate panel, not tied to the identify tool, without adding
Hi Sebastian,
If your aim is to load the output of QTiles back into QGIS then I would
recommend that you set QTiles to generate a mbtiles file (choose to
output to file, and change the file type to mbtiles). These files will
load into QGIS.
If you need to create the individual tiles as files
small changes. I suppose alternately you could just
download the Grass7Algorithm.py file from GitHub and replace the one in the
above mentioned folder.
Andrew
On Tue, Aug 11, 2015 at 12:29 PM, Bernd Vogelgesang <
bernd.vogelges...@gmx.de> wrote:
> Hi Andrew
>
>
> Am 06.08.2015, 19
On 09/08/2015 15:07, Bernd Vogelgesang wrote:
There seems to be no way to get rid of that function from the model
manually in a text editor, identifying the section and removing it still
leaves a crippled model which refuses to load.
Questions:
Is there anyone around who is able to explain me th
Victor,
I edited the version of the processing plugin that i have installed (QGIS
2.8.3, processing 2.10.1) with the changes you made and now GRASS7 tools
work as they should, thanks!
Andrew
On Thu, Aug 6, 2015 at 5:59 AM, Victor Olaya wrote:
> A quick (but very relevant) note about GRA
Just a thought Richard, but if you don't need to edit the data, could
you not use a join to add a (precalculated) rotation field on the fly,
either on the DB side, or in QGIS?
Cheers,
Andy
On 23/07/2015 09:10, Richard McDonnell wrote:
Hi,
I am in need of some guidance, I am trying to create
Have a look at this:
https://hub.qgis.org/issues/10098
If this is your problem, deleting the SBN/SBX files and / or building a
QGIS spatial index (QIX) should help.
On 09/07/2015 00:38, Donovan Cameron wrote:
I've seen that happen when there's an invalid spatial index on the data.
Delete or
5.html
I never got around to trying it since I dont use mrsid images very often
and when I do I just do it on my windows machine, but the instructions are
more up to date and dont rely on the plugin.
Andrew
On Fri, Jun 26, 2015 at 10:58 AM, Chris House wrote:
> i did try both of the buil
The difference between the 2 projections you mentioned is that the first,
"Kertau (RSO)/RSO Malaya (m) (EPSG:3168)" uses meters as the units and the
second, "Kertau (RSO)/RSO Malaya (ch) (EPSG:3167)" uses chains. you can
tell from the "(m)" and "(ch)" at the end.The .prj specifies the Units as
met
e a look at the
> "Processing" in the menu.
>
> Here's an example,
>
> http://opensourcegisblog.blogspot.com.au/2014/08/image-processing-using-orfeo-toolbox-in.html
>
>
> Noli
>
>
>
> On 5/9/15, Dr. Mitchell Andrew Schull wrote:
>> Hi
Hi all,
I’m a new qGIS user (yesterday). I’m trying to find a good ENVI replacement
and it seems like qGIS is pretty good. One of the nice features is the ability
to quickly map your data on Google Earth without having to create a KML via
GEarth_View. Unfortunately if your data is not proper
Hi Brent,
The following a link from the page you originally referenced to the OGC
MetOcean DWG there is a link to a GitHub repository with some symbols in
SVG here:
https://github.com/OGCMetOceanDWG/WorldWeatherSymbols
Andy
On 04/02/2015 21:29, Brent Wood wrote:
Hi,
This symbol library se
Kuhn wrote:
Hi Andrew,
WKT is a format for geometries and not a file type. Therefore it is not
possible to offer a save as WKT just like that. You can however easily
choose Comma Separated Value as export format and then choose AS_WKT in
the Geometry combobox under layer options.
Best regards,
Mat
It is possible to export in WKT format by copying then pasting into a
text editor. However, there is no WKT option when exporting via Layer ->
Save As. Is there a particular reason for this, or is there a
development list where I could request this?
_
I have the country border and city data from NaturalEarth in separate
layers.
(http://www.naturalearthdata.com/downloads/10m-cultural-vectors/)
Is there a straightforward way of merging these into a single layer?
___
Qgis-user mailing list
Qgis-user@l
With country border data from NaturalEarth, I'm using Ctrl-C to copy a
selected country and paste it into a text editor in WKT format. However,
I can't find a way to make this use a specific projection. So far the
only way I've found to get the result I need is to first export a shape
file usin
Hi Michael,
Off the top of my head, but have you looked into a laser scanner mounted
on some sort of aerial platform such as a cherry picker? Not sure
whether the platform would be stable enough.
Alternatively a low level UAV flight may provide a detailed enough DTM
through stereo imagery an
Hi Carlos,
I ran into this problem yesterday in 2.4(i dont remember if i was
working in windows or linux) and I was able to get around it by
suppressing the pop-up window (settings>options>digitizing and check
the box to suppress the pop-up attribute window).
Hope that helps,
Andrew
seful on the "Get Involved" page
somewhere as well as some information on how to contribute to other
documentation like help files.
andrew
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
http://lists.osgeo.org/mailman/listinfo/qgis-user
Hi there. I'm new to QGIS and I'm looking to mask the base layer I've added
to my composition. In ArcGIS this would be done by clipping one layer to
the extent or shape of another. Any help would be greatly appreciated.
Best,
*Andrew Hostetler*
_
3-band.
Thanks,
Jonathan
On 2 December 2013 16:10, Andrew Harfoot <mailto:a...@geodata.soton.ac.uk>> wrote:
I think QGIS is innocent in this - if a band is set as an alpha
channel then it should be handled as such by default in a viewer
(so mark down Arc for not us
1 - 100 of 136 matches
Mail list logo
