I tried to download the latest version and got the message: This is a
documentation error, please report back to QGIS devs. There was no link with
it. I have a screen shot. Can someone please send me a link to the devs,
Thanks
Jake
___
Qgis-user maili
Is there an easy way, even an existing plugin, to identify photos which show
an object (fish) swimming over a white board.
I live on a river and there is a potential problem with alewives, an
extremely important fish in the food chain. I'd like to find a way with a
wildlife camera to take a
I got the following message Plugin MetaSearch: The plugin will be disabled
because it crashed QGIS during last startup. Please report an issue and
re-enable the plugin when the problem has been solved. I use the 2.14.
Googling it did not result in a solution. Should I report it as a bug or is
it k
, Jake Maier wrote:
> It’s driving me nuts. Seems to be so straight forward and I don’t get it.
>
> The advanced digitizing panel tool seems to work sometimes as
> expected, and at times I cannot draw the actual leg of a line or polygon.
>
> When I enter angle and distance,
It's driving me nuts. Seems to be so straight forward and I don't get it.
The advanced digitizing panel tool seems to work sometimes as expected, and
at times I cannot draw the actual leg of a line or polygon.
When I enter angle and distance, the tool draws the rubber band all right
but when I cl
-user@lists.osgeo.org
Subject: Re: [Qgis-user] wms call responds with error
Hi Jake,
can you access the plugins from the official repo?
Bernhard
Am 08.09.2015 um 23:59 schrieb Jake Maier:
> I still have the problem that qgis seems not to see the internet. I
> can connect to the Maine GIS
isted.
Is there anywhere else within qgis where I can check or change how qgis
accesses the internet?
Thanks for help
Jake
-Original Message-
From: qgis-user-boun...@lists.osgeo.org
[mailto:qgis-user-boun...@lists.osgeo.org] On Behalf Of Jake Maier
Sent: Tuesday, September 08, 2015 10:36 A
amp;VERSION=1.3.0
What happens if you use that URL in your browser? Do you get a capabilities
document or not?
I doubt that this is a QGIS problem. Are you behind a proxy? If yes you have
to tell QGIS in Settings - network.
Bernhard
Am 08.09.2015 um 15:00 schrieb Jake Maier:
> Yes, Richard th
S&REQUEST=GetCapabilities&VERSION=1.3.0
What happens if you use that URL in your browser? Do you get a capabilities
document or not?
I doubt that this is a QGIS problem. Are you behind a proxy? If yes you have
to tell QGIS in Settings - network.
Bernhard
Am 08.09.2015 um 15:00 schrieb
? Do you get a capabilities
document or not?
I doubt that this is a QGIS problem. Are you behind a proxy? If yes you have
to tell QGIS in Settings - network.
Bernhard
Am 08.09.2015 um 15:00 schrieb Jake Maier:
> Yes, Richard that's the server. And yes I still have the same problem.
>
e? have an idea how to troubleshoot this problem?
Thanks for your help
Jake
-Original Message-
From: Richard Duivenvoorde [mailto:rdmaili...@duif.net]
Sent: Tuesday, September 08, 2015 4:53 AM
To: Jake Maier; qgis-user@lists.osgeo.org
Subject: Re: [Qgis-user] wms call responds with error
A few years ago, I set up a few wms servers from the Maine GIS office to
download Maine airphotos. This always worked without problem but all of a
sudden I get the following error
WMS Provider
Failed to download capabilities:
Download of capabilities failed: Host mapserver.maine.gov not foun
Hello everyone,
When I edit a field and change the label of the field, I get an error, "An
error occurred while evaluating the calculation string: No root node!
Parsing failed?"
The label does not change in the table, but I can see the change in the map
after I save the shape file, and in the tab
looking for and then you can create a user CRS in QGIS.
Nicolas Cadieux M.Sc.
Les Entreprises Archéotec inc.
8548, rue Saint-Denis Montréal H2P 2H2
Téléphone: 514.381.5112 Fax: 514.381.4995
Le 2014-12-16 11:53, "Jake Maier [via OSGeo.org]" <[hidden email]> a écrit :
I received a s
I received a shape file with a projection of Maine West (ft)
On the fly transformation placed the property somewhere west of Brazil in
the Atlantic Ocean.
I checked all the projection and didn't find Maine West in qgis.
How can I add it to the list of projections? What information do I need for
olas Cadieux M.Sc.
Les Entreprises Archéotec inc.
8548, rue Saint-Denis Montréal H2P 2H2
Téléphone: 514.381.5112 Fax: 514.381.4995
Le 2014-12-15 19:56, "Jake Maier [via OSGeo.org]" <[hidden email]
<http://user/SendEmail.jtp?type=node&node=5177962&i=0> > a écrit :
I
I wanted to move the attribute toolbar to a different docked location but my
finger slipped somehow and now the toolbar is only half visible, and the
handle to move the bar is off screen and not selectable.
What can I do to get the bar back to the docked location I wanted to move it
in the first
rue Saint-Denis Montréal H2P 2H2
Téléphone: 514.381.5112 Fax: 514.381.4995
Le 2014-12-13 19:34, "Jake Maier [via OSGeo.org]" <[hidden email]> a écrit :
>
> I mostly work with WMS raster files. Each time I change anything, turning on
> or off layers, editing lay
I mostly work with WMS raster files. Each time I change anything, turning on
or off layers, editing layers etc, the WMS reloads the raster even if there
is no change in the underlying data of the raster. I have a slow connection
and it drives me crazy to wait each time I move vertices. I often use
I don't quite understand it, but now it works. I found a xml file with the
same name (who knows how that got there) and I deleted the jpg, xml and jpgw
and started over and now it works
Sorry about the noise
jake
From: Jake Maier [mailto:j...@jmforestry.com]
Sent: Monday, December 01,
In the past I could save an airphoto as an image and load it right back into
qgis because of the world file. Now it seems not to work in qgis 2.6 on
Windows 7 64.
Did I something wrong or did I find a bug? The directory of the photo also
contains the worldfile.
Thanks for any hint
Jake
_
Redoute, you are absolutely right. Wouldn't any reasonable person think so?
;)
Maybe not, anyway I will withdraw the bug report.
Thanks
Jake
-Original Message-
From: Redoute [mailto:redo...@tortenboxer.de]
Sent: Thursday, November 20, 2014 3:53 AM
To: Jake Maier; 'qgis
Can someone please confirm that the zoom to selection in qgis 2.6 still
zooms only to the first item in the selection
Thanks
Jake
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
http://lists.osgeo.org/mailman/listinfo/qgis-user
I got this email all of a sudden and have no idea really why, and what
bounced, because I get all the list emails.
Can someone please tell me what's going on here
-Original Message-
From: qgis-user-boun...@lists.osgeo.org
[mailto:qgis-user-boun...@lists.osgeo.org] On Behalf Of
qgis-user-re
Hi Jonathan
I'm happy to report the bug. I get a lot of mileage out of qgis and it makes
me feel good to give at least a little bit back.
Thanks for the confirmation.
Jake
From: Jonathan Moules [mailto:j.mou...@hrwallingford.com]
Sent: Wednesday, November 12, 2014 9:13 AM
To: '
I am using QGIS 2.4.0
When I select several layers, let's say a number of adjacent boundary
layers, and click on 'zoom to layers' in the right click menu, the program
will only zoom to the first of the selected layers.
Do I use that feature wrong, or is it a known bug? What should, can I do?
Writ
PM
To: qgis-user List
Subject: Re: [Qgis-user] loading layer style makes style invisible on canvas
On 18/10/2014, at 05:29 , Jake Maier wrote:
> Hi Everybody
> First of all, thank you all participants for this vital and first class
listserv.
> I have a problem that looks like a bug but is
Ramon,
I forgot yes that is 2.4 and also in different weekly updates.
Jake
-Original Message-
From: qgis-user-boun...@lists.osgeo.org
[mailto:qgis-user-boun...@lists.osgeo.org] On Behalf Of Jake Maier
Sent: Friday, October 17, 2014 8:26 PM
To: 'qgis-user List'
Subject: Re:
-boun...@lists.osgeo.org] On Behalf Of Ramon Andiñach
Sent: Friday, October 17, 2014 8:05 PM
To: qgis-user List
Subject: Re: [Qgis-user] loading layer style makes style invisible on canvas
On 18/10/2014, at 05:29 , Jake Maier wrote:
> Hi Everybody
> First of all, thank you all participants for
:29 , Jake Maier wrote:
> Hi Everybody
> First of all, thank you all participants for this vital and first class
listserv.
> I have a problem that looks like a bug but is so basic that I cant
imagine that its broken.
> I have a joined layer of soils with the soil attributes in the joi
Hi Everybody
First of all, thank you all participants for this vital and first class
listserv.
I have a problem that looks like a bug but is so basic that I can't imagine
that it's broken.
I have a joined layer of soils with the soil attributes in the joined
database. I also have a saved style
I tried to get 2 plugins which returned the following errors. What should I
do?
Thanks
Jake
For the SaTSVis plugin I got the following message
The plugin is broken. Python said: 'unicode'object has no
attribute'toString'
Couldn't load plugin DigitizingTools due an error when calling its
classF
Hi,
I have an issue with openlayer for quite some time meaning it was already
in previous versions. I use now 2.2 master.
When I open a Google image the first time, I see my layers correctly, but
underneath are 6 or so maps of the total earth in a row
I only need to pan a tiny bit and it will s
s out.
Stefan
On 30/03/2557 08:04, Jake Maier [via OSGeo.org] wrote:
My computer crashed and now I cannot open a file anymore I was working with
for the last 6 months
The file.qgs has 0 bytes, but there is a file.qgs~ with 262Kb. J
Can I get the file back and how, or do I need to start fres
My computer crashed and now I cannot open a file anymore I was working with
for the last 6 months
The file.qgs has 0 bytes, but there is a file.qgs~ with 262Kb. J
Can I get the file back and how, or do I need to start fresh? L
Thanks for any help. I switched back from a weekly to Valmiera bec
Thank you Werner and Nathan,
Will do.
Jake
From: Werner Macho [mailto:werner.ma...@gmail.com]
Sent: Tuesday, March 04, 2014 6:56 AM
To: Jake Maier
Cc: qgis-user
Subject: Re: [Qgis-user] FW: google map connector
Hi!
As Nathan already said .. You can create an issue on the development
I re-installed the plug-in and went back to qgis 2.2 still I get the following
error
I also seem not able to contact the developer (Google)
Any idea what I should do?
J
<https://www.google.com/> Google
Error: invalid_client
Bad request.
Request Details
From: Jake Maier [ma
The author of the plug-in is Google. Just wanted to contact the author, but I
don’t think google will read my message. J
Jake
From: Werner Macho [mailto:werner.ma...@gmail.com]
Sent: Monday, March 03, 2014 7:32 AM
To: Jake Maier
Cc: qgis-user
Subject: Re: [Qgis-user] google map connector
, 2014 7:32 AM
To: Jake Maier
Cc: qgis-user
Subject: Re: [Qgis-user] google map connector
Hi!
I think the same thing applies as for every plugin right now ..
If you are using master you should be aware that a lot of changes already went
into master (like multi-threaded-rendering) and some
I only can second it.
Fantastic service thank you Anita
Jake
From: qgis-user-boun...@lists.osgeo.org
[mailto:qgis-user-boun...@lists.osgeo.org] On Behalf Of Chrest, David
Sent: Monday, March 03, 2014 9:58 AM
To: qgis-user@lists.osgeo.org
Subject: [Qgis-user] Great book for learning QGIS
t_id=j...@jmforestry.com
Jake Maier
6 Lower Falls Road
Orland
ME 04472
469 0231
j...@jmforestry.com
<>
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
http://lists.osgeo.org/mailman/listinfo/qgis-user
, schrieb Jake Maier:
> The openlayer layer at times displays its Google satellite raster at
> incorrect locations. It happened that a band of 4 or 5 earths
> displayed over the screen. At other times the magnification was correct
but 300 feet off.
>
> I use 2/10 version of 2.1
>
Thi
The openlayer layer at times displays its Google satellite raster at
incorrect locations. It happened that a band of 4 or 5 earths displayed over
the screen. At other times the magnification was correct but 300 feet off.
I use 2/10 version of 2.1
Jake Maier
6 Lower Falls Road
Orland
ME
ket.
What should I do.
Jake
Jake Maier
6 Lower Falls Road
Orland
ME 04472
469 0231
j...@jmforestry.com
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
http://lists.osgeo.org/mailman/listinfo/qgis-user
Loading the newest version did solve the problem Thank you very much
Jake
From: Olivier Dalang [mailto:olivier.dal...@gmail.com]
Sent: Thursday, February 13, 2014 4:10 PM
To: Jake Maier
Cc: qgis-user
Subject: Re: [Qgis-user] edit polygon point jumps uncontrollably
Are you using the
Ooops now I see the 2/10 version. Don’t know why I till now never saw it.
I hope installing it will solve the problem.
Jake
From: Olivier Dalang [mailto:olivier.dal...@gmail.com]
Sent: Thursday, February 13, 2014 4:10 PM
To: Jake Maier
Cc: qgis-user
Subject: Re: [Qgis-user] edit polygon
Olivier,
I seem to have the latest version, downloaded 2/2/14
But thanks for the pointer.
Jake
From: Olivier Dalang [mailto:olivier.dal...@gmail.com]
Sent: Thursday, February 13, 2014 4:10 PM
To: Jake Maier
Cc: qgis-user
Subject: Re: [Qgis-user] edit polygon point jumps uncontrollably
...@lists.osgeo.org] On Behalf Of Paolo Cavallini
Sent: Thursday, February 13, 2014 1:24 AM
To: qgis-user@lists.osgeo.org
Subject: Re: [Qgis-user] edit polygon point jumps uncontrollably
Il 12/02/2014 17:43, Jake Maier ha scritto:
> In 2.1 master, when I edit a polygon layer I can move a point
the
layer and the project differ?
Bernhard
Am 12.02.2014 17:43, schrieb Jake Maier:
> Hi again
>
> Now I have another more serious problem.
>
> In 2.1 master, when I edit a polygon layer I can move a point to the
> location I intend but as soon as I release the mouse button, t
Hi again
Now I have another more serious problem.
In 2.1 master, when I edit a polygon layer I can move a point to the
location I intend but as soon as I release the mouse button, the point
jumps outside of the canvas, and sometime way outside meaning the lines to
the point are about parallel.
]
Sent: Wednesday, February 12, 2014 4:14 AM
To: 'Jake Maier'; 'Hayashi Reiko'; qgis-user@lists.osgeo.org
Subject: RE: [Qgis-user] layers have sometimes have to be turned on and, off
and on again to show up
Do you happen to have a "plugin layer" loaded?
For me it
Don, I run the 64 bit version.
Jake
-Original Message-
From: qgis-user-boun...@lists.osgeo.org
[mailto:qgis-user-boun...@lists.osgeo.org] On Behalf Of Saulteau Don
Sent: Tuesday, February 11, 2014 6:32 PM
To: qgis-user@lists.osgeo.org
Subject: Re: [Qgis-user] layers have sometimes have to
number?
>
>
> Mike
>
>
>
> On 2/10/2014 9:29 AM, qgis-user-requ...@lists.osgeo.org wrote:
>>
>> Date: Sun, 9 Feb 2014 20:00:13 -0500
>> From: "Jake Maier"
>> To:
>> Subject: [Qgis-user] layers have sometimes have to be turned on and
>>
If that is not the problem what is your OS and QGIS version number?
Mike
On 2/10/2014 9:29 AM, qgis-user-requ...@lists.osgeo.org wrote:
> Date: Sun, 9 Feb 2014 20:00:13 -0500
> From: "Jake Maier" To:
> Subject: [Qgis-user] layers have sometimes have to be turned on and
&
Since qgis 1.8, I sometimes have to turn layers on and off and on again,
sometime 3 or 4 times, to make them show on the canvas. This is not a
consistent problem
Does anyone know what the problem may be?
Jake
___
Qgis-user mailing list
Qgis-u
Person A is linked to New York City, Person B is linked to New York City,
therefore Person A is linked to Person B.
Yes, however Person A and B also have 50 other locations that need to be
checked against each other. The data might say NY, NYC, or NY City or New
York, NY and other variations, g
Sorry I forgot, I'm using 2.0.1 last updated about a month ago on a PC Win7
From: Jake Maier [mailto:j...@jmforestry.com]
Sent: Tuesday, November 05, 2013 4:54 PM
To: 'Qgis-user@lists.osgeo.org'
Subject: disappearing shape layer
Actually the layer itself is not disappearin
again, it will normally display.
Thanks for any help
Jake
Jake Maier
6 Lower Falls Road
Orland
ME 04472
469 0231
j...@jmforestry.com
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
http://lists.osgeo.org/mailman/listinfo/qgis-user
+2
Real good idea J
Proud and thankful user of qgis
Jake
From: qgis-user-boun...@lists.osgeo.org
[mailto:qgis-user-boun...@lists.osgeo.org] On Behalf Of Lene Fischer
Sent: Wednesday, October 02, 2013 9:04 AM
Cc: qgis-psc; qgis-developer; qgis-user
Subject: Re: [Qgis-user] [Qgis-psc] donate
I just downloaded version 2.0.1. The program loaded fast and smooth until it
was time to load the aerial photos. They only displayed as colored stripes
across the screen. I downloaded the photos again from the web (those
displayed alright) and saved them as jpg, but again they came up only as
colo
Maybe you can also use the Windows snipping tool to copy the image directly
from the program.
Jake
-Original Message-
From: qgis-user-boun...@lists.osgeo.org
[mailto:qgis-user-boun...@lists.osgeo.org] On Behalf Of Richard Duivenvoorde
Sent: Friday, September 13, 2013 6:35 AM
To: Luisa Peña
I tried to update the classification plugin and got the following error
The version now installed is 2.1.1
I use windows 7 prof. and use the QGIS 2.0. I last updated QGIS a month or 2
ago.
What should I do?
Thanks for any help
Jake
Couldn't load plugin SemiAutomaticClassificationPlugin
I did find the error. Sorry for the noise. I had still one layer in a wrong
crs
Jake
From: qgis-user-boun...@lists.osgeo.org
[mailto:qgis-user-boun...@lists.osgeo.org] On Behalf Of Jake Maier
Sent: Wednesday, July 10, 2013 7:41 PM
To: qgis-user@lists.osgeo.org
Subject: [Qgis-user] qgis
I just switched to 2.0 and like the improvements very much.
First all went very well, but now working with an 1.8 file saved as 2.0 file
the processing of vector layers is excruciately slow. Entering a new node or
point takes minutes and I always get a message "Error, latitude or longitude
exceede
John,
Would TauDEM be helpful to show consequences of a dam removal project at the
coast (of Maine), where the dam removal would create reversing falls and
had consequences upstream for bridge foundations and wetlands (now
freshwater then brackish to some degree)?
What kind of input variable woul
I think you hit the nail on its head. I just started to look into GRASS
still not really knowing what it's adding to qgis. But it must be GRASS
Thanks Micha
J
From: Micha Silver [mailto:mi...@arava.co.il]
Sent: Tuesday, July 09, 2013 3:18 PM
To: Jake Maier
Cc: 'David J. Bakeman
David, thanks for your suggestion, but if it's a plugin, it should show up
in every project (file). It only is in one .qgs file, though it seems to be
related to that file.
Jake
From: David J. Bakeman [mailto:dbake...@comcast.net]
Sent: Tuesday, July 09, 2013 1:40 PM
To: Jake Maier
Cc:
I have a red rectangle on my canvas even when I deselect all layers
How did it get there? How can I get rid of it? What is the function of it?
I had it in qgis 1.8 and it is now also in the newly installed 2.0
Thanks for your help
Jake
___
Qgis-us
features" under Input Vector Layer 5.
> Make sure "Use only selected features" is checked under difference
> layer 6. Create an output shapefile and run.
>
> You should have a new stand with multiple "holes" cut into it so you
> get the right acreage.
&g
Nijssen
Sent: Tuesday, July 09, 2013 11:11 AM
To: qgis-user@lists.osgeo.org
Subject: Re: [Qgis-user] cut several segments into a polygon
Jake,
It's still called 1.9 and you can download it here:
http://qgis.org/downloads/weekly/
Raymond
On 09-07-13 17:07, Jake Maier wrote:
> Hi
;holes" cut into it so you
> get the right acreage.
>
> Randy
>
>
>
>
>
> On Tue, Jul 9, 2013 at 7:42 AM, Jake Maier <mailto:j...@jmforestry.com>> wrote:
>
> How can I create a polygon with several areas cut out. The cut out
> areas are a
How can I create a polygon with several areas cut out. The cut out areas are
all contained in polygons of the same shape file.
I have a large forest stand and contained in it are many smaller stands.
Thank you for your help
Jake
___
Qgis-user mail
I want to create a new polygon and in one area it should follow the segments
of another polygon .
(I have a forest and want to delineate the stands.) Which plug-in can I use
to tell the program that from here to there it should just follow an
existing polygon either in the same shapefile (stands)
qgis-user@lists.osgeo.org;
go here to ask you question. They are very helpful and knowledgeable
J
From: Robert Bryan [mailto:rbr...@forestsynthesis.com]
Sent: Tuesday, June 25, 2013 6:28 PM
To: 'Jake Maier'
Subject: RE: QGIS crashes?
All CRS is NAD 83/UTM 19N. Also ,t
-Original Message-
From: qgis-user-boun...@lists.osgeo.org
[mailto:qgis-user-boun...@lists.osgeo.org] On Behalf Of skampus
Sent: Tuesday, June 04, 2013 10:31 AM
To: qgis-user@lists.osgeo.org
Subject: Re: [Qgis-user] Euclidean Distance grid creation problem
Alex Mandel-2 wrote
> Grey pixels
Hi
I didn't think I would have problems with clipping. In the past it always
worked properly. But now I have a soil layer, and created a rectangle as a
clip layer.
Everything seems normal and goes like expected until I open the new, clipped
layer and it's empty.
Would anybody please have an ide
When I try to change the default crs in
/options/crs/coordinate reference System for new layers
And select a layer other than wgs 84, after pressing OK it reverts back to
wgs 84
Do I overlook something or is this a bug?
Thanks
Jake
___
Qgis-u
Hi Everyone
Does anyone have experience with LIDAR and qgis, what do I need to display
LIDAR information within qgis?
I mean other than the 2 terabyte hard drive to obtain the information?
Or does anyone know if I can get LIDAR for Maine (USA) on the internet?
Thank you very much for any pointe
I tried to update sextante and got error loading plugin
The plugin seems to be invalid or have unfulfilled dependencies.
Python said: cannot import name runalg.
Jake
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
http://lists.osgeo.org/mailma
I looked at the tutorial for using the georeferencer and it looked quite
simple and straight forward. But applying it I get strange results.
Depending on the transformation type I get either a black rectangle or the
image I want to reference, but at a wrong location. Each of the
transformation ty
I have the following problem.
I work with two screens, one set to landscape the other to portrait
orientation. I therefore would like to be able to move all the toolbars and
panels to either the right and left side or to top and bottom. I easily can
do this by hand, but wonder if I can save two d
I found a potential reason.
I called the 2 columns x and y. When I call the columns 'x col' and 'y col'
it worked fine
Jake
From: Jake Maier [mailto:j...@jmforestry.com]
Sent: Sunday, November 25, 2012 3:09 PM
To: 'qgis-user@lists.osgeo.org'
Subject: problem w
I tried to add 2 columns to a table for label placement and everything seems
to work as expected. I could see the 2 columns listed in table manager, but
after the manager created the new attribute table only had one column left.
I started with 4 columns, added 2 and was then left with just one colu
From: David J. Bakeman [mailto:dbake...@comcast.net]
Sent: Tuesday, November 20, 2012 6:53 PM
To: Jake Maier
Cc: qgis-user@lists.osgeo.org
Subject: Re: [Qgis-user] red line is gone
On 11/20/2012 06:58 AM, Jake Maier wrote:
Hi
I exited the program and re-started it, which did the trick
The
Hi
I exited the program and re-started it, which did the trick
The line is gone.
Jake
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
http://lists.osgeo.org/mailman/listinfo/qgis-user
Hi
All of a sudden a thin red line appeared in a project in qgis. I have no
idea what I did to get the line, but now I can't get rid of it anymore. I
deselected all layers still the line remains. It is a simple project with a
few jgp air photos (all deselected) and a few shape files (also deselec
> -Original Message-
> From: Bernd Vogelgesang [mailto:bernd.vogelges...@gmx.de]
> Sent: Saturday, November 17, 2012 6:26 PM
> To: Jake Maier
> Subject: Re: [Qgis-user] entering distance and bearing for polygon or
> polyline
>
> welcome to the show ;)
>
> ac
Can someone please help?
When creating a new polygon or polyline I want to enter numerical values for
distance and bearing instead of pointing to the location of vertices. How
can I do this
I thought there was a popup window where you could enter the values but I
can't find it and googling it I
Thanks Tyler
You are right, and thinking a bit about it I found a perfectly appropriate
solution with the normal crs
Jake
From: Tyler Mitchell [mailto:i...@locatepress.com]
Sent: Tuesday, August 28, 2012 11:52 AM
To: Jake Maier
Cc: qgis-user@lists.osgeo.org
Subject: Re: [Qgis-user] custom
I try to make a blueprint for a stirling engine that I want to build. I
think I'll need a custom crs for that. How would I go about it. What would
the code look like. Or is it all together a silly idea and I should look for
another drawing program to create blueprints?
Any opinion and or help with
Hi
I now run qgis 1.8 on a windows 7 machine and when I try to open the log
message with 4 messages inside the computer freezes completely. Nothing
works anymore and I have to press the panic button to reboot. If I don't
click on the little yellow triangle with the black exclamation mark
everythin
Hi
I get a message when I exit qgis that qgis has stopped working and windows
is looking for a solution. Qgis is working correctly and everything seems
working properly until I exit. This problem occurred with 1.7.4 and now also
with 1.8.
I have also qgis installed on my laptop with Ubuntu 12.04
> -Original Message-
> From: Giovanni Manghi [mailto:giovanni.man...@faunalia.pt]
> Sent: Wednesday, June 27, 2012 1:09 PM
> To: Jake Maier
> Cc: 'Gary Sherman'; qgis-user@lists.osgeo.org
> Subject: Re: [Qgis-user] qgis 1.8 when official release
>
> On We
Hi
I did successfully install qgis 1.8 on my Win7 pc, but when I try to install
it on my Ubuntu machine I get 'failed to download package files' even so I'm
connected to the internet.
I have 12.04 and used the software center to first uninstall 1.7.4 and then
to install 1.8.
Please what can I
-Original Message-
> From: Gary Sherman [mailto:gsher...@geoapt.com]
> Sent: Wednesday, June 27, 2012 11:16 AM
> To: Jake Maier
> Cc: Gary Sherman; qgis-user@lists.osgeo.org
> Subject: Re: [Qgis-user] qgis 1.8 when official release
>
>
> On Jun 27, 2012, at 6:19
Hi
I postpone installing the nightly 1.8 version since about a month because I
hear from different sources that the official release is right around the
corner.
It still seems not to be ready for release. Hearing all the good stuff about
1.8, I'm contemplating to install the nightly release but am
> Follow the link at the bottom of all emails you receive from the
> mailing list and go to "change your subscription options"
[JM]
Thank you everybody for the mail options information
Jake
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
http:/
Hi
Who can please help me to change my mailing preferences. I am going back to
Germany for a week and just want to receive a summary of the emails and not
all the individual emails. Possibly a summary once a week. Is that possible
and how would I go about it. Thanks for any help
Jake
__
> Agreed - but many Unity users might not, so it should at least work as
> expected...
>
> Most newcomers to linux will most probably use Unity as it's the
> default desktop of the most popular distro for first-time linux users
> (I think).
[JM]
Exactly. That's my situation. It's very confusing w
> -Original Message-
> From: Paolo Cavallini [mailto:cavall...@faunalia.it]
> Sent: Thursday, June 14, 2012 8:11 AM
> To: Jake Maier
> Cc: qgis-user@lists.osgeo.org
> Subject: Re: qgis 1.8
>
> Il 14/06/2012 13:34, Jake Maier ha scritto:
> > Where and when
1 - 100 of 154 matches
Mail list logo