The Park TS-2 is your stand, yes ? (sorry I don't know your name as it
isn't shown)
The logical first question is, How was the know attached on your stand to
begin with ? And to follow that, how was it attached from the factory ?
According to their parts diagram the knob is held in place with
I do have the locknut, but it doesn't help. It keeps the knob from turning
clockwise once it's snug against it, but counter-clockwise (the unscrewing
action) doesn't work.
On Fri, Oct 14, 2022 at 1:31 AM Garth wrote:
> My first question then is "how was the knob attached to begin with from
> the
I'd try something like red Loctite first. Easy to find, easy to apply.
If that doesn't work you might try looking for a more robust replacement
thread-on knob that has a set screw built in. Find our the pitch of your
metal thread and check out McMaster-Carr for "threaded hole knobs."
On Frida
Already tried red loctite. Doesn't work.
On Fri, Oct 14, 2022 at 5:34 AM Eric Marth wrote:
> I'd try something like red Loctite first. Easy to find, easy to apply.
>
> If that doesn't work you might try looking for a more robust replacement
> thread-on knob that has a set screw built in. Find ou
Did you watch the video to see exactly how Park does it ?
Are you sure you're not bottoming out the knob first before you tension the
nut against it ? (They say leave 8 threads after the locknut is threaded
on.)
Follow the video, that's all I can say. If you say that doesn't work then
that do
Have you lubricated the other items along the threaded rod to reduce the
amount of torque required to rotated the rod? Boeshield would be good for
that. Lubricate the shaft (except for the knob/locknut) and the tighten the
locknut real good against the knob. If that doesn't work, the just keep a
The Microshifts are not just cheaper than Dura-Ace, they're cheaper than
anything Shimano. They're also more sweat resistant than anything Shimano,
I have a history of gumming up Shimano bar-ends. Never had this problem
with the Microshifts. I've had them on my Custom for 8 years and will put
th
Hi all.
S. If you listen carefully you can hear my 1990s Cannondale T1000
whisper, "I wish I were an Atlantis!" How many parts you can spot from the
Riv catalog in this recent pic?
https://www.flickr.com/photos/millhiser/52412267528
Answers:
- Cockpit: Tallux stem, Albasta
I have used JB Weld on a number of metal to non-metal interfaces and it worked really well. I can’t recall any failing. This is the standard JB Weld that has black & white materials that you mix together to get a gray material.Robert TilleySan Diego, CASent from my iPhoneOn Oct 13, 2022, at 7:52 PM
I spoke too soon. Overnight, the loctite cured and now I can turn it (with
a ton of effort, but it works!). Now I can build up my wheel.
On Fri, Oct 14, 2022 at 6:46 AM lconley wrote:
> Have you lubricated the other items along the threaded rod to reduce the
> amount of torque required to rotate
Epoxy
On Friday, October 14, 2022 at 8:41:41 AM UTC-7 pi...@gmail.com wrote:
> I spoke too soon. Overnight, the loctite cured and now I can turn it (with
> a ton of effort, but it works!). Now I can build up my wheel.
>
> On Fri, Oct 14, 2022 at 6:46 AM lconley wrote:
>
>> Have you lubricated
I could never keep the paint on any of my bikes that immaculate! My new
Roadini already has a paint chipped off the headtube (dunno how!). My
Co-Motion Periscope Trident @ 12,000 miles has so many patched paint areas
that there's no spot that hasn't been patched up. It's all beausage but I'm
gu
Dang - sweet deal on caps! Count me in for next on the unlikely chance it
falls through ;)
James
On Thursday, October 13, 2022 at 8:28:23 PM UTC-4 jinxed wrote:
> Caps pending!! Thanks Paul
>
> On Thursday, October 13, 2022 at 6:27:56 PM UTC-6 jinxed wrote:
>
>> Lost part of my post...
>> I ge
Hi, Laing. I sent a PM on the platform pedals.
James
On Friday, October 14, 2022 at 12:43:17 PM UTC-4 lconley wrote:
> Platform pedals and parts picture. Note that the Urban pedals have silky
> smooth sealed bearings, and the GR-10 are the normal ball and cone MKS
> bearings that seem to get
Sounds like you need to lubricate that shaft. It shouldn't take a ton of
effort to adjust. I have one of those.
Bill S
San Diego
On Friday, October 14, 2022 at 8:47:10 AM UTC-7 cycli...@gmail.com wrote:
> Epoxy
>
>
> On Friday, October 14, 2022 at 8:41:41 AM UTC-7 pi...@gmail.com wrote:
>
>>
I forget to add what Laing already mentioned, I figured the knob was
loosening because the shaft wasn't moving freely enough. Hence, people
overtighten the knob and break it in trying to compensate for the
resistance in the main shaft. If lube isn't enough, a new main shaft kit
would apply.
O
Oops, clean and lubricate the shaft AND all the other joints that are
supposed to move when you turn the shaft. Just do everything.
Bill S
San Diego
On Friday, October 14, 2022 at 11:53:05 AM UTC-7 Garth wrote:
> I forget to add what Laing already mentioned, I figured the knob was
> loosening
There's some nice lug work on that Phillips frame Philip.
Regards,
Corwin
On Tuesday, October 11, 2022 at 8:55:05 AM UTC-7 Philip Williamson wrote:
> If anyone needs Speedblend tires for their period-correct 2004 Hillborne
> or Quickbeam build, these are the first I’ve seen in a decade or so:
Caps and BxB bag are sold. THANK YOU!
On Friday, October 14, 2022 at 11:10:58 AM UTC-6 mcgr...@gmail.com wrote:
> Dang - sweet deal on caps! Count me in for next on the unlikely chance it
> falls through ;)
>
> James
>
> On Thursday, October 13, 2022 at 8:28:23 PM UTC-4 jinxed wrote:
>
>> Caps
Someday a bike shop is going to put one of your bikes back together
properly. Maybe not today, maybe not tomorrow, but that day will come.
On Thursday, October 13, 2022 at 7:23:02 PM UTC-7 Bicycle Belle Ding Ding!
wrote:
> I got my bike done today at the shop and it has made a huge difference
Handlebars still available, make an offer!
On Tuesday, October 11, 2022 at 2:02:35 PM UTC-7 Jared Wilson wrote:
> Todays offerings...
>
> *Nitto/RBW Bull Bar, 70cmx31.8mm - $100 + shipping*
>
> Good used condition, currently sold out at Riv.
>
> Love this handlebar but I'm a creature of habit and
Joe, isn’t it the truth? I got it all put right now, I think! More on that later. I’m headed out to dinner…Sent from my iPhoneOn Oct 14, 2022, at 3:36 PM, Joe Bernard wrote:Someday a bike shop is going to put one of your bikes back together properly. Maybe not today, maybe not tomorrow, but that
Wow! I have a soft spot for old Cannondales. Generally they seem to be
"sported out" aesthetically which isn't my thing. I am amazed at how slick
and classy it looks built up rivendell-esque.
On Friday, October 14, 2022 at 8:48:48 AM UTC-7 pi...@gmail.com wrote:
> I could never keep the paint
Platform pedals sold.
On Friday, October 14, 2022 at 1:17:35 PM UTC-4 mcgr...@gmail.com wrote:
> Hi, Laing. I sent a PM on the platform pedals.
>
> James
>
> On Friday, October 14, 2022 at 12:43:17 PM UTC-4 lconley wrote:
>
>> Platform pedals and parts picture. Note that the Urban pedals have si
Mackenzy,
I have this same soft spot, especially for the old T1000 and 700. This one
is amazing!
On Friday, October 14, 2022 at 2:24:46 PM UTC-7 Mackenzy Albright wrote:
> Wow! I have a soft spot for old Cannondales. Generally they seem to be
> "sported out" aesthetically which isn't my thin
Beautiful green paint. Been having fun looking through your Flickr
albums. Bikes and Leica's, whats not to love.
On Friday, October 14, 2022 at 2:38:20 PM UTC-7 Joe Bernard wrote:
> Mackenzy,
>
> I have this same soft spot, especially for the old T1000 and 700. This one
> is amazing!
>
> On
Is there a contact list going into tomorrow? My number is 239.877.4119,
and I intend to depart Chicagoland ~5 AM tomorrow. See y'all tomorrow!
On Tuesday, October 11, 2022 at 2:41:10 PM UTC-5 Bicycle Belle Ding Ding!
wrote:
> <>>>
>
> First, a caveat: This ride is not affiliat
I sent you a PM…Sent from my iPhoneOn Oct 14, 2022, at 6:27 PM, Conway Bennett wrote:Is there a contact list going into tomorrow? My number is 239.877.4119, and I intend to depart Chicagoland ~5 AM tomorrow. See y'all tomorrow!On Tuesday, October 11, 2022 at 2:41:10 PM UTC-5 Bicycle Belle Ding
I hope to see a lot of you and your lovely Rivbikes tomorrow. And if there
would just be one RivSister in the bunch I would be so happy.
But, if not, I’ll represent.
Leah
On Friday, October 14, 2022 at 7:00:20 PM UTC-4 Bicycle Belle Ding Ding!
wrote:
> I sent you a PM…
>
> Sent from my iPho
Hey
Curious if anyone might have one of these they’re looking to sell? Thanks!
- Dan
Jersey
--
You received this message because you are subscribed to the Google Groups "RBW
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to rbw-owners-bunc
Yeah looks great! The rear basket would look silly on the racing platypus,
but it just fits in with what this bike is for.
Hear me out on the triangle: one orange triangle on the back of each
pannier, and the green one up on the basket for three (!) rear triangles
and nice symmetry. The Ron
Leah, what a nice change! Your bike is perfect. I'm with Jason...3
triangles on the back, just like he described.
Joyce
On Friday, October 14, 2022 at 6:23:30 PM UTC-7 Jason Fuller wrote:
> Yeah looks great! The rear basket would look silly on the racing
> platypus, but it just fits in with
Totally gonna do it, Jason! Wo!
> On Oct 14, 2022, at 9:23 PM, Jason Fuller wrote:
>
> Yeah looks great! The rear basket would look silly on the racing platypus,
> but it just fits in with what this bike is for.
>
> Hear me out on the triangle: one orange triangle on the back of e
Because more is MORE! 🤣 Totally doing it.
> On Oct 14, 2022, at 9:31 PM, JAS wrote:
>
> Leah, what a nice change! Your bike is perfect. I'm with Jason...3
> triangles on the back, just like he described.
>
> Joyce
>
>> On Friday, October 14, 2022 at 6:23:30 PM UTC-7 Jason Fuller wrote:
>>
34 matches
Mail list logo
