[RBW] Re: WTB: Nitto M18 rack

I think I'm gonna sit tight for the full adaptability of the M18. Thanks! On Sunday, June 18, 2023 at 9:02:54 AM UTC-7 iamkeith wrote: > > I don't have an M18 (i actually need one too), but I have this SOMA rack > that I recently prchased in its stead, but didn't work. If you're > interested

[RBW] Re: WTB: Nitto M18 rack

I don't have an M18 (i actually need one too), but I have this SOMA rack that I recently prchased in its stead, but didn't work. If you're interested and think it could work for your application, I'll give it to for you a bargain;

[RBW] Re: WTB: zippy skinny tire 62x58ish c-c frameset

Look for a early Lemond Zurich 61 cm. They are on the big side, will Cypress 700x30 tires, short reach brakes with pads at the bottom of the slots. Zippy, good climber, good no hands riding behavior. Or a Lemond Poprad. Both under the radar brakes. Mike SLO CA On Tuesday, June 6, 2023 at

Re: [RBW] Re: WTB/WTT: Berthoud saddle anti-twist clamp

Hey Luke, Thanks for the tip! I will definitely give that a shot, nothing to lose… I’m no lightweight, I’m sure it would be a good idea on mine. Thanks, Doug On Fri, Jun 2, 2023 at 11:21 PM Luke Hendrickson wrote: > I have an old Berthoud from the first 400 made and faced the same issue. I

[RBW] Re: WTB/WTT: Berthoud saddle anti-twist clamp

I have an old Berthoud from the first 400 made and faced the same issue. I emailed Berthoud direct and they were willing to ship one via the post at no cost to me. I just explained that I had an older one without the clamp and they obliged. Hope that helps! On Friday, June 2, 2023 at 5:56:32 

[RBW] Re: WTB: Rivendell Clem L 59cm

Bump. Still looking. Thank you. Jan -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To view this discussion

[RBW] Re: WTB: Suntour Cyclone GT long cage

Thanks to everyone who reached out about Cyclones, I'm all taken care of. On Thursday, May 25, 2023 at 10:13:42 AM UTC-4 Eric Marth wrote: > Great, thanks George! I'll send you an email here shortly. > > On Wednesday, May 24, 2023 at 9:54:21 PM UTC-4 George Schick wrote: > >> Eric - I've

[RBW] Re: WTB: Suntour Cyclone GT long cage

Great, thanks George! I'll send you an email here shortly. On Wednesday, May 24, 2023 at 9:54:21 PM UTC-4 George Schick wrote: > Eric - I've viewed the photo of your Cyclone GT as closely as possible. > It appears to be completely identical to the short cage Cyclone that I have > available,

[RBW] Re: WTB: Suntour Cyclone GT long cage

Eric - I've viewed the photo of your Cyclone GT as closely as possible. It appears to be completely identical to the short cage Cyclone that I have available, the only difference being the lengths of the derailler cages. Therefore, if you can't get that spring fix to work the simplest repair

[RBW] Re: WTB: Suntour Cyclone GT long cage

Thanks all! I have heard from several people now, here and outside the forum, who have suggested bending a new tab. I saved the spring so I'll give that a try. Drew: As far as I know the Suntour Cyclone Mark 1 short and long cage used the same cage tension spring. I'm not sure if the ARX, XC

[RBW] Re: WTB: Suntour Cyclone GT long cage

Like Reginald suggested, I bent a new tab onto the end of one of those springs a year or two ago. It has held up so far, but the derailer is only in use as a tensioner on a dinglespeed. Getting the bend angled so that it would go back together correctly was a little bit of a nuisance, but if

[RBW] Re: WTB: Suntour Cyclone GT long cage

@Eric Echoing George's comment, my local bike non-profit has a handfull of old Suntour derailers(ARX, XC, XCE). Happy to send any/all you think might be worth a look for parts harvesting. swinging through there today to grab some stuff for a project. let me know! On Wednesday, May 24, 2023 at

[RBW] Re: WTB: Suntour Cyclone GT long cage

Hmmm...let me dig around in my parts box. I have at least one Sun Tour RD in there, but it might be a short cage. But you could take it apart - the spring should be the same. I'll PM you with my findings. On Monday, May 22, 2023 at 4:39:54 PM UTC-5 eric...@gmail.com wrote: > Hello friends —

[RBW] Re: WTB: Suntour Cyclone GT long cage

Wonder if you can bend a new tab on the end of that spring to make it work? Thanks, Reginald Alexis On Monday, May 22, 2023 at 4:39:54 PM UTC-5 eric...@gmail.com wrote: > Hello friends — On yesterday's ride I broke one of the tabs on the chain > tension spring of my Cyclone rear mech. > >

[RBW] Re: WTB - Bosco-Moose handlebar (fillet braze) or Choco-Moose

i'll join the queue! i'm looking for a 580mm boscomoose, not real picky on condition. if you can ship it cheaper than bluelug, please send me a note! thanks paul takoma park, md. -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To

[RBW] Re: WTB Nitto Technomic 190mm stem & more

Hi Michael, PM sent. Best regards, Jeff Arita Claremont, CA On Monday, May 22, 2023 at 11:40:50 AM UTC-7 Michael Baquerizo wrote: > Looking to put together a riv style bike for my mom, belated birthday and > mothers day gift. > > Hoping to do so on a budget, already cleared out my parts bin

[RBW] Re: WTB Nitto Technomic 190mm stem & more

after some intense searching it doesnt seem that the technomic ever came in 190, only 150 and then a jump to 225. i guess im searching specficially for a technomic deluxe, in 190 height and 120 length. 110 length should probably do just fine as well. On Monday, May 22, 2023 at 2:40:50 PM

[RBW] Re: WTB: A pair of King Iris cages

All — I've found some cages, thanks! Erzi — Sorry, I don't have any big bottle cages to trade. On Sunday, May 21, 2023 at 9:21:05 AM UTC-4 ezre...@gmail.com wrote: > Hi Eric, > I'm looking to replace my Iris cages with ones that would hold a Nalgene. > Don't suppose you would have any to

[RBW] Re: WTB: A pair of King Iris cages

Hi Eric, I'm looking to replace my Iris cages with ones that would hold a Nalgene. Don't suppose you would have any to trade do you? Ezri On Friday, May 19, 2023 at 10:38:10 AM UTC-4 eric...@gmail.com wrote: > Hello people — I'm looking for a used pair of Iris cages. If you have an > old set

[RBW] Re: WTB Jim Cage BIG (for 32oz bottles)

I picked up one of these instead and its very nice. A tiny bit more $$ but not much. https://analogcycles.com/products/tanaka-dromedary-nalgene-cage?variant=43661304987880 On Sunday, May 7, 2023 at 12:17:17 PM UTC-4 Lenny wrote: > These seem to have been sold out for while on the Riv website.

[RBW] Re: WTB 650b conversion parts for Riv Road Standard

Eric, I don't have any parts for you but good luck in your quest and conversion. That's a great-looking, classic Riv. I love the paint. I certainly support the 650 conversion and fitting 42s with fenders. What tubing is your bike built from? I've also been curious how 1up racks do with

[RBW] Re: WTB 650b conversion parts for Riv Road Standard

Ryan, Thanks, I feel pretty fortunate finding this one. The rack is a 1-up, which I also found a good deal on used, but are available new here . Eric On Friday, April 28, 2023 at 12:56:25 PM UTC-4 Ryan wrote: > Can't help you with what you

[RBW] Re: WTB 650b conversion parts for Riv Road Standard

Can't help you with what you are looking for...but that's some find with a top-notch build...for a classic Riv road bike Also, that is a very ingenious rack on the back of your vehicle. Did you build that yourself by any chance? Good luck with your conversion...surely the list will be able to

Re: [RBW] Re: WTB: 51cm Sam Hillborne in Sage/Blue

good lookin out! I got one of the new colors in 51 On Mon, Apr 24, 2023 at 12:44 PM Matthew Williams < matthewwilliamsdes...@gmail.com> wrote: > Hi Colin, if you're still looking, here's a 48... > > > https://sfbay.craigslist.org/sby/bik/d/san-jose-48cm-rivendell-sam-hillborne/7613752659.html >

[RBW] Re: WTB: 51cm Sam Hillborne in Sage/Blue

Hi Colin, if you're still looking, here's a 48... https://sfbay.craigslist.org/sby/bik/d/san-jose-48cm-rivendell-sam-hillborne/7613752659.html On Friday, October 28, 2022 at 8:10:26 AM UTC-7 Colin wrote: > Hello! Looking to buy a 51cm Sam Hillborne frame or complete in sage/light > blue if

Re: [RBW] Re: WTB: Nitto quill adapter, 130mm

What a good story, Garth! I can remember that moment in time too--sorry about Rush cancelling, though--including bike touring on those 100-degree Midwest days on a Schwinn Le Tour. That's a pretty area of Ohio you are in now, yes, nice for motorcycling too. Although Mom-and-Pops stores have

[RBW] Re: WTB: Nitto quill adapter, 130mm

Driftless ... did you say Driftless Tom ? !!! I was just talking about this with my brother a few weeks ago. and what a treasure it is. I grew up in Rochester, MN and I regularly rode to Winona and back in the 80's. I'd also stay at hotels on the Wisconsin side and take day trips around by

[RBW] Re: WTB: Nitto quill adapter, 130mm

Thank you, both. I tried that one branded as Soma, Wes, and it was too tall; I'll get hold of Ben's Cycle and confirm things, Garth. I agree with your thumbs up for Midwestern sensibilities; I'm thinking seriously about returning to the Driftless area for all the riding and more that it

[RBW] Re: WTB: Nitto quill adapter, 130mm

Ben's Cycle in Milwaukee is always a go-to place to find Nitto things, and these stem adapters are no different. The folly of looking for these adapters is that they go by many different names and, the model numbers get mixed up, and the photos shown are often of a different variation. So of

[RBW] Re: WTB: Nitto quill adapter, 130mm

Looks like it is in stock at Soma: https://www.somafabshop.com/shop/27507-nitto-stem-mtc-024-130mm-riser-28-6-22-2-slv-5875 I have one of the longer version that I think is surplus. But if you're looking for height, I would recommend the product that allowed me to retire the Nitto riser. This

[RBW] Re: WTB - 51 or 55cm Cheviot

Hi Joyce, thanks for the tip about the Portland cheviot. No luck contacting them, tho. On Thursday, April 20, 2023 at 7:43:18 PM UTC-4 JAS wrote: > Gary, > There's a Cheviot on the Portland, Oregon Craigslist, though it's listed > as small/medium rather than a specific measurement. > >

[RBW] Re: WTB - 51 or 55cm Cheviot

Gary, There's a Cheviot on the Portland, Oregon Craigslist, though it's listed as small/medium rather than a specific measurement. https://portland.craigslist.org/clc/bik/d/lake-oswego-rivendell-cheviot-bicycle/7603619142.html Joyce On Thursday, April 20, 2023 at 4:05:30 PM UTC-7 Gary L wrote:

Re: [RBW] Re: WTB Sinewave Cycles Beacon 2 Dynamo Light, or reviews

That light is gorgeous however that was my concern, too: beam pattern. I prefer the more European beam pattern of either the Son Edelux or the Busch + Mueller IQ-X (B+M makes the mirror for the Edelux, too). More American lights with their conical beams… not to my taste and seemingly very

[RBW] Re: WTB: Rivendell Clem L 59cm

I currently have a 59 cm Clem L in lime olive. My hope that I can buy a 59cm Clem L in RBW Blue this coming Friday, when the Clems' go on sale at RBW. If that happens, then I would post my 59 cm Clem L for sale here. Kim Hetzel Yelm, WA. On Tuesday, April 18, 2023 at 10:31:23 AM UTC-7

Re: [RBW] Re: WTB Sinewave Cycles Beacon 2 Dynamo Light, or reviews

My experience is only with the V.1 Beacon, and I must admit it has been a bit disappointing to me, so I’m hoping some of the shortcomings have been improved in this new version. Like Jeff mentioned, it just kinda blasts a lot of light out, unfocused, so it’s best for off-road riding. Personally,

[RBW] Re: WTB Sinewave Cycles Beacon 2 Dynamo Light, or reviews

We've got two (his/her) Beacon V.1's. Purchased 1st quarter 2017. Both worked okay until one of them has issues with all of the LEDs firing up upon faster speeds. Worked with the Owner and he stands behind his products. Around that same time I asked him if he were going to consider making

[RBW] Re: WTB Sinewave Cycles Beacon 2 Dynamo Light, or reviews

I have one, but have not had a chance to use it yet. I ordered the gen1 and it kept getting delayed. I changed plans and ran with something else for a while, but still plan to put mine into service this year. Overall, I felt a bit ripped off for a while, waiting with continual promises of it

[RBW] Re: WTB Sinewave Cycles Beacon 2 Dynamo Light, or reviews

I think the Beacon 2 is still at pre order status. They are supposed to start shipping in summer is all it says. On Tuesday, April 18, 2023 at 3:41:05 PM UTC-7 brizbarn wrote: > Anyone have a Sinewave Cycles Beacon 2 Dynamo Light they want to sell? Or > has anyone used it, and care to share

[RBW] Re: WTB: Nitto M18 or 32F

Found one, thanks! On Monday, April 17, 2023 at 4:32:14 PM UTC-7 Kieran J wrote: > Hello, > > I'm looking for one of these racks. I'd consider either one. > > Thanks! > > Kieran > Victoria, BC > > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch"

[RBW] Re: WTB: Rivendell Clem L 59cm

Bump. Still looking for an earlier 59 Clem L. Frame/Fork preferably. Thanks. -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to

[RBW] Re: WTB 60 cm Sam

Nick-Ive got a 60 Sam frame, with wheels, tires, side pull brakes, bars and misc other parts that I did not use for a build of an Atlantis. Not sure what you need, other than the frame. It is a double top tube, in the light blue color. I can get some good pictures of how it sits tonight when

[RBW] Re: WTB / 27.2 nice quality seatpost in BLACK

Brian - I have a black Thomson Elite setback for you. $85 shipped. Melanie On Wednesday, April 12, 2023 at 9:37:32 AM UTC-4 brok...@gmail.com wrote: > Thanks Max! Unfortunately all they have in stock is the 0 setback version, > not the one with the regular setback. I noticed that Analog also

[RBW] Re: WTB / 27.2 nice quality seatpost in BLACK

Thanks Max! Unfortunately all they have in stock is the 0 setback version, not the one with the regular setback. I noticed that Analog also had one of these in their secret sale, but it was only 0 offset as well. -B On Wednesday, April 12, 2023 at 9:29:14 AM UTC-4 maxcr wrote: > Hi Brian, >

[RBW] Re: WTB / 27.2 nice quality seatpost in BLACK

Hi Brian, Not quite black, but super cool - https://www.sim.works/products/froggy-seatpost?variant=36497226662054 at $70 discounted Outlet Collection might be what you're looking for. Max On Wednesday, April 12, 2023 at 7:07:37 AM UTC-6 brok...@gmail.com wrote: > Working on some upgrades for

[RBW] Re: WTB Large Rosco Baby in the next 12 months

Thanks Bones, that's an awesome photo, love it! I have no idea how you manage to mount the bike, I'm very flexible but I don't know how I'd do it. We hope to have another one down the line (first one has to get here first!) but at that point maybe we could transition the older one to a

[RBW] Re: WTB Rambouillet 54 or Bleriot 55

Hi Mike, PM Sent, Best regards, Jeff Arita Claremont, CA On Wednesday, March 22, 2023 at 4:03:32 PM UTC-7 mike naranjo wrote: > Hi Everyone, > > I realize this may be a long shot, but please let me know if you have any > leads on a Rambouillet in a size 54 or a Bleriot in a size 55. Thank

[RBW] Re: WTB Large Rosco Baby in the next 12 months

i will say any bike with a top tube as opposed to a swooping tube is not something i’d recommend for a child carrier (if back seat is the eventual considerat) the ability to mount goes down severely when there’s a live being back there. unless you’re doing yoga and stretching regularly i’m

[RBW] Re: WTB Large Rosco Baby in the next 12 months

FWIW, I spoke to Will about the Rosco Baby and he told me the new Clem's are the closest thing to them. Big difference being that tubes in the Rosco Baby are burlier. Joe in Los Angeles On Monday, April 10, 2023 at 4:52:52 PM UTC-7 maxcr wrote: > Thanks Laing, Slin and Paul! > > In 2016 Riv

[RBW] Re: WTB Large Rosco Baby in the next 12 months

Laing is right that the latest Clem L has a much longer top tube than the Clementine, but it's not 4.5 inches longer. Max - Bosco bars are a great for getting more space for you and the baby. Sizing up on a Clem for me has worked great to get space for my knees with the baby up front too. On

[RBW] Re: WTB Large Rosco Baby in the next 12 months

I have a Clementine and a Rosco Baby. BIG, BIG difference. The Rosco Baby Effective Top Tube is about 4-1/2 inches longer that the Clementine. 725mm for the Rosco Baby 52cm, 610mm for the Clementine 52cm. The current Clem may be slightly different than the original Clementine, but not 4-1/2

[RBW] Re: WTB: Parts for Noodles

Jason, I have the levers you're looking for, and I'm local. I also have a tall Technomic in 5 cm extension. https://photos.app.goo.gl/cwJKiWsXg8Ld6GUB9 On Sunday, April 2, 2023 at 8:18:11 PM UTC-5 Jason wrote: > Hi all, > > > I’m preparing to try out Noodle bars on my Sam and am looking for

Re: [RBW] Re: WTB: Nitto 32F mini front rack

Thanks guys. Mine is a 51mm with cantis… Doug On Mon, Apr 3, 2023 at 10:26 AM greenteadrinkers wrote: > Just for general knowledge, I recently installed a 32F on my 54cm Sam with > Shimano Deore V-Brakes, plenty of clearance, and zero interference. Can't > speak to any other combo, but if you

[RBW] Re: WTB: Nitto 32F mini front rack

Just for general knowledge, I recently installed a 32F on my 54cm Sam with Shimano Deore V-Brakes, plenty of clearance, and zero interference. Can't speak to any other combo, but if you have a 54 Sam with V-brakes, rest assured it will work (some light bending required). I'm super curious if

[RBW] Re: WTB: Nitto 32F mini front rack

Don't have one but can confirm it fits an Appa BUT..it fits better with cantilever brakes. The horizontal cable on v-brakes tends to interfere with the center strut on those racks. On Sunday, April 2, 2023 at 8:29:27 PM UTC-7 Doug Van Cleve wrote: > Howdy folks, > > Anybody have one

[RBW] Re: WTB Clem Smith Jr L Frameset

I believe they will be in stock in the coming month(s?) - a batch is en route according the last email On Friday, March 31, 2023 at 11:49:47 AM UTC+11 Wesley wrote: > I meant to say "mismatched fork", not for. > -W > On Thursday, March 30, 2023 at 5:48:52 PM UTC-7 Wesley wrote: > >> Hi Graham,

[RBW] Re: WTB Clem Smith Jr L Frameset

I meant to say "mismatched fork", not for. -W On Thursday, March 30, 2023 at 5:48:52 PM UTC-7 Wesley wrote: > Hi Graham, > I have been waiting for the same frame as you for a long time, and there > are none that I know of available. BUT! > 1. Rivendell will have them back in stock in a few weeks

[RBW] Re: WTB Clem Smith Jr L Frameset

Hi Graham, I have been waiting for the same frame as you for a long time, and there are none that I know of available. BUT! 1. Rivendell will have them back in stock in a few weeks 2. I saw a few in photos from the garage sale (mismatched for and/or blemished frames). If you're local to the Bay

[RBW] Re: WTB - Riv for a 69cm seat height

Forgot to mention - willing to consider frame/fork, complete bike, or anything in between. On Tuesday, March 28, 2023 at 8:22:30 AM UTC-4 Gary L wrote: > > Hi all, I’ve got a friend looking to get a Rivendell. She has a 69cm seat > height and wants to use it on fire roads, etc. for day rides

[RBW] Re: WTB: Nitto dirt drop stem, 26.0 x 8cm or 10cm

I think I've got this covered, thanks for all the replies. On Thursday, March 23, 2023 at 2:50:31 PM UTC-4 Eric Marth wrote: > Hello friends — I'm looking for a used Nitto dirt drop stem with a 26.0 > clamp and either 8cm or 10cm extension. > > Please let me know if you have one you'd part

[RBW] Re: WTB: IRD Sub-C FD

May I suggest a Campagnolo Veloce or Chorus braze-on front 9/10-speed derailleur, such as that found at Treefort Bikes. In my experience, they work well as a compact derailleur, at least for how Campy defines compact. I’d contact Rivendell directly to see if they have experience with the

[RBW] Re: WTB: Ruthworks Storm Series Micah or Brevet handlebar bag

Pm sent Ray On Friday, March 17, 2023 at 11:51:25 AM UTC-7 andyree...@gmail.com wrote: > Hello group, > If anyone has a Ruthworks Storm Series Micah or Brevet handlebar bag > they'd like to sell, I'd gladly buy! > > Cheers, > Andrew > Franklin TN > -- You received this message because you

[RBW] Re: WTB Gus / Susie / Clem Frameset (56-59)

Not sure if you are still looking for a Gus, but I just posted one for sale FS: Gus Boots Wilsen size 57 RBW Blue (google.com) On Monday, February 27, 2023 at 1:37:02 AM UTC-5 dylant...@gmail.com wrote: > Hey Ya'll > > Trying to

[RBW] Re: WTB Nitto 32f mini rack

Still looking, anybody got one? -Jeff On Tuesday, 7 February 2023 at 20:01:53 UTC-6 jeffbog...@hotmail.com wrote: > Bump - still looking... > > On Sunday, 29 January 2023 at 19:11:22 UTC-6 jeffbog...@hotmail.com wrote: > >> Anyone have an extra 32f lying around that they don't want? >> Please

[RBW] Re: WTB: Bosco 58cm Aluminum Handlebars

Deal struck, thanks! On Wednesday, March 1, 2023 at 5:51:57 PM UTC-8 JW wrote: > Might consider Boscomoose as well! > > On Wednesday, March 1, 2023 at 5:49:29 PM UTC-8 JW wrote: > >> Hey group, >> >> Looking for some 58cm Bosco bars. >> >> Have some Billie bars to trade if interested. >> >>

[RBW] Re: WTB: Bosco 58cm Aluminum Handlebars

Might consider Boscomoose as well! On Wednesday, March 1, 2023 at 5:49:29 PM UTC-8 JW wrote: > Hey group, > > Looking for some 58cm Bosco bars. > > Have some Billie bars to trade if interested. > > Please respond off list, thanks :) > > Jared in SLO, CA > -- You received this message because

Re: [RBW] Re: WTB Gus / Susie / Clem Frameset (56-59)

Thank you all for letting them know about my bike for sale! On Monday, February 27, 2023 at 1:07:40 PM UTC-8 brok...@gmail.com wrote: > Ryan here has been trying to sell his Large Susie for a few weeks now. > It’s a dark gold one. > > On Feb 27, 2023, at 3:59 PM, Kim Hetzel wrote: > >  > > >

Re: [RBW] Re: WTB Gus / Susie / Clem Frameset (56-59)

Ryan here has been trying to sell his Large Susie for a few weeks now. It’s a dark gold one.On Feb 27, 2023, at 3:59 PM, Kim Hetzel wrote:https://spokane.craigslist.org/bik/d/spokane-rivendell-susie-wolbis-56/7590872334.htmlKim HetzelYelm, WA.On Sunday, February 26, 2023 at 11:12:24 PM UTC-8 Joe

[RBW] Re: WTB Gus / Susie / Clem Frameset (56-59)

https://spokane.craigslist.org/bik/d/spokane-rivendell-susie-wolbis-56/7590872334.html Kim Hetzel Yelm, WA. On Sunday, February 26, 2023 at 11:12:24 PM UTC-8 Joe Bernard wrote: > I can't figure out how to link it but scroll back a couple pages for > thread FS: Susie/Wolbis, it's a Dark Gold

[RBW] Re: WTB Gus / Susie / Clem Frameset (56-59)

I can't figure out how to link it but scroll back a couple pages for thread FS: Susie/Wolbis, it's a Dark Gold 56cm. Also listed on Ebay. On Sunday, February 26, 2023 at 10:37:02 PM UTC-8 dylant...@gmail.com wrote: > Hey Ya'll > > Trying to track down a Gus in 57, Susie in 56, or Clem L in 59.

[RBW] Re: wtb: 58cm quickbeam

Edit: I'm sitting on a 700c Velocity Dyad (not atlas) with Phil track f/f hub ad WI Dos 16/19. The problem which started this wtb was "what to do with them"... as.I type this out it dawned on me to consider the roaduno... It needs to handle gravel and dirt roads "good enough" as that's the

[RBW] Re: wtb: 58cm quickbeam

I wish I was holding a 650b wheelset, then I would go with a lightning bolt... On Friday, February 24, 2023 at 12:40:02 PM UTC-6 Jason Zakaras wrote: > You are correct, Bill, that I have owned both QB and SO. However the SO > was a 56cm and I could never really dial it in to my liking and

[RBW] Re: wtb: 58cm quickbeam

You are correct, Bill, that I have owned both QB and SO. However the SO was a 56cm and I could never really dial it in to my liking and when I came close, the aesthetic was off, to me. I ended up selling the SO, but maintained the wheelset as they were brand new and I could potentially use

[RBW] Re: wtb: 58cm quickbeam

Jason In September of 2022, when I was showing off my 58 Quickbeam build, you stated explicitly that you have a 58 Simple One, and implied that you also own a 58 Quickbeam. What's happened since then? Are you growing your collection of singlespeeds? Or did you sell things and regret it?

[RBW] Re: wtb: 58cm quickbeam

The Simpleone is sold, thanks for all your interest. Alan On Thursday, February 23, 2023 at 3:15:30 PM UTC-5 jasonz...@gmail.com wrote: > yes, its sold or pending sell currently. Thanks! > > On Thursday, February 23, 2023 at 2:04:31 PM UTC-6 maxcr wrote: > >> Jason, did you see this SimpleOne?

[RBW] Re: wtb: 58cm quickbeam

yes, its sold or pending sell currently. Thanks! On Thursday, February 23, 2023 at 2:04:31 PM UTC-6 maxcr wrote: > Jason, did you see this SimpleOne? > https://groups.google.com/u/5/g/rbw-owners-bunch/c/x1K4Hw3zUj4 > Max > > On Thursday, February 23, 2023 at 2:52:23 PM UTC-5

[RBW] Re: wtb: 58cm quickbeam

Jason, did you see this SimpleOne? https://groups.google.com/u/5/g/rbw-owners-bunch/c/x1K4Hw3zUj4 Max On Thursday, February 23, 2023 at 2:52:23 PM UTC-5 jasonz...@gmail.com wrote: > please DM me if youre holding and open to sell Ideally frame/fork or > f/f+headset/bb > thank you > >

[RBW] Re: WTB: Nitto Tallux Stem - 11cm, 25.4mm

Stem obtained! Thanks, David On Wednesday, February 15, 2023 at 12:47:48 PM UTC-6 David B wrote: > Looking to swap up the stem on my Clem - originally built this with > Albatross bars, switched to Wavie which I've been running for a few years, > but the 12cm stem has always been a touch long.

[RBW] Re: WTB Atlantis 55 cm

The new 55cm, 700c Atlantis and the GBW are the two Riv's I most want to try. The Atlantis improves on my 54 Hunqapillar by having a longer top tube and the front wheel way out there, which I like. I also want to try the longer chainstays and have no idea if I would like them, or not. The

[RBW] Re: WTB Atlantis 55 cm

Here's a fine looking one: https://www.facebook.com/groups/3127504017358010/permalink/5611404848967902/ Good luck! On Monday, February 13, 2023 at 9:21:36 AM UTC-8 tylerj...@gmail.com wrote: > In search of an Atlantis 55cm, frame or complete. Let me know what you > have or potentially have

[RBW] Re: WTB: affordable 650b wheelset

Hey Bill did you sell these wheels? On Sunday, April 24, 2022 at 4:12:06 PM UTC-7 Bill Lindsay wrote: > I have exactly what you need, I think. > > I just sold a barely used Yves Gomez. I had hoped to move all the parts > over to a larger Gomez, but it looks like that's not going to happen.

[RBW] Re: WTB Nitto 32f mini rack

Bump - still looking... On Sunday, 29 January 2023 at 19:11:22 UTC-6 jeffbog...@hotmail.com wrote: > Anyone have an extra 32f lying around that they don't want? > Please send pm with what you have, thanks! > > Jeff > -- You received this message because you are subscribed to the Google Groups

[RBW] Re: WTB Albatross Bar, NYC area

Found a bar, thanks everyone! -Stephen On Friday, February 3, 2023 at 2:10:25 PM UTC-5 Stephen wrote: > Hey thanks for checking Justin! I'll let you know if I change my mind. > > On Friday, February 3, 2023 at 11:47:10 AM UTC-5 Justin Kennedy (Brooklyn, > NY) wrote: > >> Sounds like the

[RBW] Re: WTB Albatross Bar, NYC area

Hey thanks for checking Justin! I'll let you know if I change my mind. On Friday, February 3, 2023 at 11:47:10 AM UTC-5 Justin Kennedy (Brooklyn, NY) wrote: > Sounds like the Albatrosses currently housed on a Clem, so not available > at the moment. Let me know if you change your mind about the

[RBW] Re: WTB Albatross Bar, NYC area

Sounds like the Albatrosses currently housed on a Clem, so not available at the moment. Let me know if you change your mind about the Boscos! J. On Friday, February 3, 2023 at 10:36:53 AM UTC-5 Stephen wrote: > JS - Yeah, Mass would be a stretch and I figured shipping would cost more > than

[RBW] Re: WTB Albatross Bar, NYC area

JS - Yeah, Mass would be a stretch and I figured shipping would cost more than its worth for used bars. Thanks for reaching out. Justin - Hey that'd be great if the albatross end up being available. There's someone else local checking their parts bin today for me. I'm a bit dead set on going

[RBW] Re: WTB Albatross Bar, NYC area

Hi Stephen, I'm in Brooklyn and may have a pair. But i think I loaned them to a friend. Let me see if he's still using them. If not, they're yours. I def have a pair of CroMo Boscos that are the same width (55cm), just a little more rise and uprightedness. On Friday, February 3, 2023 at

[RBW] Re: WTB Albatross Bar, NYC area

Stephen, I an in Massachusetts so a bit far. I have the cro mo version I am no longer using. Shipping is a bit high on a box to fit (if I could find one). On Thursday, February 2, 2023 at 7:17:52 PM UTC-5 Stephen wrote: > Been wanting to switch to less wide bar for city riding, anybody

[RBW] Re: WTB: Brass Headset Spacers

On Tuesday, January 31, 2023 at 8:52:41 PM UTC-6 I wrote: Working on my Lime Olive Sam build, I am trying to find a couple of 2mm brass 1" headset spacers. Thanks Joshua. RBW list is amazing. Ted Durant Milwaukee, WI USA -- You received this message because you are subscribed to the Google

Re: [RBW] Re: WTB: Rosco Platypus 50cm Purple

Hey! Actually, I didn't buy it as I'm really just lookin for a frame set not a complete bike. Someone on the list does have one they are willing to sell and I'm thinking it over right now. Thanks for the help guys. -Dan Jersey On Friday, January 27, 2023 at 10:53:29 PM UTC-5 Johnny Alien

Re: [RBW] Re: WTB: Rosco Platypus 50cm Purple

I believe its gone because Dan bought it. On Friday, January 27, 2023 at 10:06:24 PM UTC-5 Ryan wrote: > Call Riv...you might get lucky > > > https://www.rivbike.com/collections/riv-garage-sale?mc_cid=8b1b264f50_eid=0074b52ae1 > > Oops...sorry looks like it's gone > > On Friday, January 27, 2023

Re: [RBW] Re: WTB: Rosco Platypus 50cm Purple

Call Riv...you might get lucky https://www.rivbike.com/collections/riv-garage-sale?mc_cid=8b1b264f50_eid=0074b52ae1 Oops...sorry looks like it's gone On Friday, January 27, 2023 at 4:19:28 PM UTC-6 maxcr wrote: > For other Rosco Platypus seekers, this looks like a great deal for a 60cm >

Re: [RBW] Re: WTB: Rosco Platypus 50cm Purple

For other Rosco Platypus seekers, this looks like a great deal for a 60cm purple: https://www.rivbike.com/products/60cm-rosco-platy-demo-bike Max On Thursday, January 26, 2023 at 3:22:36 PM UTC-5 Joe Bernard wrote: > Nice! Is it the 55 I mentioned or did you find a 50? > > On Thursday,

Re: [RBW] Re: WTB: Suntour XC Pro 28.6 MicroDrive FD

Hyperglide works tremendously good!!! On Fri, Jan 27, 2023 at 11:26 JW wrote: > VTW, > > I saw the light and went with an XT M737, should be in early next week. > Will report back with how it works! > > Jared > > On Friday, January 27, 2023 at 10:16:54 AM UTC-8 vhans...@gmail.com wrote: > >>

Re: [RBW] Re: WTB: Suntour XC Pro 28.6 MicroDrive FD

VTW, I saw the light and went with an XT M737, should be in early next week. Will report back with how it works! Jared On Friday, January 27, 2023 at 10:16:54 AM UTC-8 vhans...@gmail.com wrote: > Jard in SLO, CA, > > Why matey? LX and XT hyperglide from the same era work way way way >

Re: [RBW] Re: WTB: Suntour XC Pro 28.6 MicroDrive FD

Jard in SLO, CA, Why matey? LX and XT hyperglide from the same era work way way way betta. I am never one to rain on anyone's parade but simply please don't do it. It's a great idea, in the 90's I definitely drank that kool-aid. But the bottom line here is it doesn't work as advertised.

[RBW] Re: WTB: Suntour XC Pro 28.6 MicroDrive FD

Scored an M737 at the recommendation of the above group member *sorry, you don't sign your name* so I'm all set. Thanks! Jared On Thursday, January 26, 2023 at 6:26:26 PM UTC-8 JW wrote: > 10-4, will check eBay, thanks for your input! > > Jared > > On Thursday, January 26, 2023 at 5:52:42 PM

[RBW] Re: WTB: Suntour XC Pro 28.6 MicroDrive FD

10-4, will check eBay, thanks for your input! Jared On Thursday, January 26, 2023 at 5:52:42 PM UTC-8 cjus...@gmail.com wrote: > Got it. > > Just so you know, the XC Pro has a very strong return spring. No idea if > that will make any difference for you. Looking for feedback on that with >

[RBW] Re: WTB: Suntour XC Pro 28.6 MicroDrive FD

Got it. Just so you know, the XC Pro has a very strong return spring. No idea if that will make any difference for you. Looking for feedback on that with Dura Bar Ends myself. If you revisit Shimano, I will recommend that the ones from the same era as the XC Pro are about the best for 46t

[RBW] Re: WTB: Suntour XC Pro 28.6 MicroDrive FD

I like how they look :) But I'm not opposed to other Suntour 28.6 bottom pull variants that would accomplish the same thing. And mainly Suntour over Shimano just to try something new. Thanks for your questions! Jared On Thursday, January 26, 2023 at 3:22:00 PM UTC-8 cjus...@gmail.com wrote:

[RBW] Re: WTB: Suntour XC Pro 28.6 MicroDrive FD

If you don't mind the inquiry... Why the XC Pro specifically vs an XC Pro - OR - any HyperDrive-C compatible FD which are functionally equivalent from an optimized gear range perspective? There are small but distinct differences in design between these Suntour MD and Shimano mtn-compact FDs,

<    1   2   3   4   5   6   7   8   9   10   >