updates? not sure if i could make the trip but would still be interested if
nothing else other than seeing everyone again chris In a message dated 1/9/2021
10:56:51 AM Eastern Standard Time, rctankcombat@googlegroups.com writes:
I’m going to try to contact the state to see if one of the state ga
wasn't there a half track you were working on before?
chris
In a message dated 5/23/2020 6:05:02 PM Eastern Standard Time,
3219ca...@gmail.com writes:
Thanks, Derek!
Not yet, Will. Got a few parts lined up to use in the turret rebuild but I'm
putting the Locust aside and focusing on the Panther
those finished arms looks really nice and clean!
i may have to have to make mine
chris
In a message dated 5/23/2020 3:35:13 PM Eastern Standard Time,
3219ca...@gmail.com writes:
Put in an intense day yesterday and got the suspension completely assembled.
Testing today shows it works really well
here are a few others he has done
Lasercut Panzer IV G (motorized) by JackCarter - Thingiverse
Lasercut KV-1 (motorizable) by JackCarter - Thingiverse
Lasercut B1 bis by JackCarter - Thingiverse
Lasercut Sherman - no screw by JackCarter - Thingiverse
Lasercut RC Jagdtiger by JackCarter - Thingivers
Lasercut StuG III Ausf. F by JackCarter - Thingiverse
just found this on Thingiverse, thought it might be something of interest for
someone wanting to make a Stug in 1:6 scale (after you enlarge it by 3x's)
chris
--
--
You are currently subscribed to the "R/C Tank Combat" group.
To post a mess
., Oct. 22, 2019, 9:43 p.m. odysseyslipways via R/C Tank Combat
wrote:
i know there are maybe 2 or 3 other r/c tank facebook pages and was wondering
would there be any dis/advantages of having a FB page?
i'm guessing the main issue is those that don't anything to do with FB, but
other
Hi Doug, since last we spoke, the old lap top died and got a new one and
started tinkering with Fusion 360 but don't really have the time to sit and
play with it daily (or weekly) like i'd like to but do want to get back to it
(hoping to get the hang of it)
chris
In a message dated 10/22/2019 10
i know there are maybe 2 or 3 other r/c tank facebook pages and was wondering
would there be any dis/advantages of having a FB page?
i'm guessing the main issue is those that don't anything to do with FB, but
other than that?
Chris
--
--
You are currently subscribed to the "R/C Tank Combat" g
i hear ya, i have been looking for work for a few weeks now, unless you have a
CDL or are a RN your out of luck and i can still hear my bank account
bouncing...
chris
In a message dated 10/22/2019 1:52:56 PM Eastern Standard Time,
tigertank...@gmail.com writes:
All,
This is Stu Cameron, in Se
i have only seen maybe 3 or 4 people posting in here over that last few months?
so where is everyone?
still there but life getting in the way? gone off to some FaceBook page? or
just given up on the hobby?
chris
--
--
You are currently subscribed to the "R/C Tank Combat" group.
To post a messa
BIG 3D PRINTED TANK - IT ROLLS!! - YouTube
my brother just found this and i thought i'd share it with you
chris
--
--
You are currently subscribed to the "R/C Tank Combat" group.
To post a message, send email to rctankcombat@googlegroups.com
To unsubscribe, send email to rctankcombat+unsubscr
has anyone tried a point blank kit on anything 3D printed?
if so, how did it hold up and what material was used
chris
--
--
You are currently subscribed to the "R/C Tank Combat" group.
To post a message, send email to rctankcombat@googlegroups.com
To unsubscribe, send email to rctankcombat+unsub
i was thinking the same thing but then i have been without a working computer
for the last 4 months
chris
In a message dated 3/31/2019 4:41:39 PM Eastern Standard Time,
jmaxh...@gmail.com writes:
Hello everyone!
The past months have been somewhat quiet...
I hope everyone is doing all rigth a
https://www.youtube.com/watch?v=1MiIHVKs_qk
chris
--
--
You are currently subscribed to the "R/C Tank Combat" group.
To post a message, send email to rctankcombat@googlegroups.com
To unsubscribe, send email to rctankcombat+unsubscr...@googlegroups.com
Visit the group at http://groups.google
can you post some pictures please?
chris
-Original Message-
From: taranaki tanker
To: R/C Tank Combat
Sent: Fri, Sep 14, 2018 7:51 pm
Subject: [TANKS] Need help REAL BAD
Well the m113 is on its last chance.4 YEARS ,4 different transmission/motor
combinations and it still don
any pics or videos?
chris
-Original Message-
From: Caleb Smith <3219ca...@gmail.com>
To: R/C Tank Combat
Sent: Wed, May 30, 2018 8:49 pm
Subject: Re: [TANKS] Latest and greatest with cast tracks
Thanks for the great info, Jean! I'll look into the 305 stuff. What product are
just saw these shown on a facebook page that someone is using for the cranes on
their work boats but thought maybe they might work for a balanced gun
https://www.aliexpress.com/item/Huina-Professional-Metal-Strength-Main-Arm-Second-Arm-Bucket-Arm-Driving-Rod-for-RC-Excavator/32816188037.html?shor
just saw this and thought some of you might get a laugh
--
--
You are currently subscribed to the "R/C Tank Combat" group.
To post a message, send email to rctankcombat@googlegroups.com
To unsubscribe, send email to rctankcombat+unsubscr...@googlegroups.com
Visit the group at http://groups.goo
h rc radio and
receivers for less than 50$ that got a least a 1km of range those days So
is it worth the trouble of a short range console game remote???!
J-Max
On Fri, Apr 13, 2018, 10:17 PM odysseyslipways via R/C Tank Combat
wrote:
i also wish i could hear what he was saying - even wi
i also wish i could hear what he was saying - even with both volumes at max he
was still whispering
chris
-Original Message-
From: odysseyslipways via R/C Tank Combat
To: rctankcombat
Sent: Fri, Apr 13, 2018 10:14 pm
Subject: Re: [TANKS] Interesting product
interesting, but
interesting, but only 10m range? is that due to the receiver or the game
controller?
some of the guys in here have been using PS2 controllers (not sure of the range)
chris
-Original Message-
From: Christopher Crabb
To: rctankcombat
Sent: Fri, Apr 13, 2018 3:16 pm
Subject: [TANK
just post some RCTankCombat video links on the page
chris
-Original Message-
From: Caleb Smith <3219ca...@gmail.com>
To: R/C Tank Combat
Sent: Tue, Apr 10, 2018 6:24 pm
Subject: [TANKS] Cheap imitators
WoT sponsored this guy to build a "tank" to promote their game. Why can't the
in one of the facebook pages i follow someone posted a link to this one youtube
video https://www.youtube.com/watch?v=oB9jBsKiU_U&feature=youtu.be where he
starts off with the book and then of actual Stug track links including track
cleats and then ends up with scale model track links. i found t
after clicking on the link and the page loading up, i scroll down to a black
error "Media error: Format(s) not supported or source(s) not found"
chris
-Original Message-
From: Doug Conn
To: R/C Tank Combat
Sent: Sun, Apr 1, 2018 9:13 am
Subject: [TANKS] Raspberry Pi + Linux +
can you post some pictures? someone might see something that others may miss
chris
--
--
You are currently subscribed to the "R/C Tank Combat" group.
To post a message, send email to rctankcombat@googlegroups.com
To unsubscribe, send email to rctankcombat+unsubscr...@googlegroups.com
this has been posted on another r/c tank group (across the pond) and some that
use them say they are good. the only draw back they say is that they don't take
orders online.
from what i see they are only 12vt up to 30amp and for one motor
*i don't know them, support them or use them
chris
--
i'm siting here in front of this laptop again where i normally am (any more)
so, what tank are you looking to build?
chris
-Original Message-
From: J-MaxRC
To: rctankcombat
Sent: Sun, Jan 28, 2018 1:39 pm
Subject: Re: [TANKS] Re: Where is everyone?
Ahah!
On Jan 28, 2018 9
https://www.facebook.com/media/set/?set=oa.1609506035796790&type=3
just saw this one one of the facebook pages i follow and thought it might be of
interest to someone
now i'm not sure how sturdy the body is but i'm guessing it could be replaced
with plywood
i see there are 4different ty
https://hobbyking.com/en_us/hobbyking-ultra-micro-servo-1-7g-for-3d-flight-left.html
chris
--
--
You are currently subscribed to the "R/C Tank Combat" group.
To post a message, send email to rctankcombat@googlegroups.com
To unsubscribe, send email to rctankcombat+unsubscr...@googlegroups.com
not work, so says youtube
chris
-Original Message-
From: Robert Currie
To: R/C Tank Combat
Sent: Tue, Aug 22, 2017 3:15 pm
Subject: Re: [TANKS] Kunkee's super simple suspension system
https://youtu.be/C3GInnby0d0
On Monday, April 3, 2017 at 9:13:23 AM UTC-7, Loren wrote:
correct.
ÂÂ
chris
ÂÂ
In a message dated 4/7/2017 3:39:18 PM Eastern Standard Time,
srwh7...@gmail.com writes:
ÂÂ
Would the motor or nut need a pivot? I can picture the meshing angle changing
as the gun angle changes.
--
--
You are currently subscribed to the "R/C Tank Combat" group.
To
actually, it does need to pivot or it'll bind
ÂÂ
chris
ÂÂ
In a message dated 4/7/2017 4:33:06 PM Eastern Standard Time,
3219ca...@gmail.com writes:
ÂÂ
Just design it like a tie rod end. That way the motor doesn't have to pivot.
On Friday, April 7, 2017 at 3:39:17 PM UTC-4, srwh...@gmail
so if i understand this correctly, the rectangular tubing moves freely on the
bolt. the bolt is tightened in place set at a desired position/angle when doing
so. the piano wire works as a torsion bar from within the rectangular tubing.
ÂÂ
next question, how did you assemble it - the wire throug
PM Eastern Standard Time,
panthergol...@gmail.com writes:
ÂÂ
I could make you a drawing if you gave me the thread pitch and desired profile.
I doubt it would last very long though
On Apr 5, 2017 11:49 PM, "odysseyslipways via R/C Tank Combat"
wrote:
i wonder if there are drawings th
i don't think the printer at the local shop won't have an issue with threads -
though i could always mold and one of the nuts that come with it
ÂÂ
chris
ÂÂ
In a message dated 4/6/2017 2:05:04 PM Eastern Standard Time,
kunkmies...@gmail.com writes:
ÂÂ
Acme is a standard profile. You'd have
i wonder if there are drawings that could be used to 3D print a nut?
ÂÂ
chris
ÂÂ
In a message dated 4/5/2017 7:40:34 AM Eastern Standard Time,
3219ca...@gmail.com writes:
ÂÂ
I have two of these motors I purchased a while ago. They have a 7/16 ACME
thread which is very hard to find nuts for
CAR SEAT 12VDC GEAR MOTOR i see it says non-standard thread - i'm wondering
if it's metric. thought it might make for a nice gun elevation motor if
something could be found to mate with that thread.
ÂÂ
chris
--
--
You are currently subscribed to the "R/C Tank Combat" group.
To post a m
why?
ÂÂ
In a message dated 2/20/2017 10:28:18 PM Eastern Standard Time,
steve...@gmail.com writes:
ÂÂ
What about attendance? ÂÂ
ÂÂ
As the dude who provided the prepped fields for the first five years of the
hobby (and that little sortie in 01 doesn't count), nobody here has the right
to
on the contrary, SCC seem to have set a trap, luring you in with "alternative
facts" giving you a false sense of security and it seems to have worked so
far...
ÂÂ
In a message dated 2/18/2017 5:05:52 PM Eastern Standard Time,
frank.pitte...@gmail.com writes:
ÂÂ
A close examination of the so
i was going through my facebook notices and one posted a link about some 1:6
scale tanks at Bovington, so i watched it and in one part the cameraman asks
about what fluid does you use for the smoke and he says baby oil..
ÂÂ
https://youtu.be/F6nFgkKv1_8ÂÂ
ÂÂ
chris
--
--
You are curren
it almost looks small like a kids play toy tank until you see that recliner
behind it
ÂÂ
chris
ÂÂ
In a message dated 2/12/2017 6:58:38 AM Eastern Standard Time,
steve...@gmail.com writes:
ÂÂ
Impressive work,
On Saturday, February 11, 2017 at 6:14:50 AM UTC-5, Niels Erik Kristensen wrote:
i'm not one for understanding that sort of stuff, but i am looking to buy a
set of files that require that program to use it. i have seen a few free
download links (2012 version) on the web but haven't clicked onto one yet as
my luck i'd pick a bogus link and get something other than the auto
_Click here: Here comes the open source Snow Plow Robot | Open
Electronics_
(http://www.open-electronics.org/here-comes-the-open-source-snow-plow-robot/)
i just ran across this in an unrelated search (it's amazing how much
unrelated crap turns up when your not looking for it) and started l
found 'em, it's Tank Chain
chris
In a message dated 12/20/2016 5:49:03 P.M. Eastern Standard Time,
rctankcombat@googlegroups.com writes:
i'm looking to see if the individual is still here. i tried looking for
your facebook page but don't seem to be able to find it
chris
--
--
You
i'm looking to see if the individual is still here. i tried looking for
your facebook page but don't seem to be able to find it
chris
--
--
You are currently subscribed to the "R/C Tank Combat" group.
To post a message, send email to rctankcombat@googlegroups.com
To unsubscribe, send email t
so i take it all of thesee gears are also 3D printed?
chris
In a message dated 10/22/2016 7:20:26 A.M. Eastern Daylight Time,
n...@live.dk writes:
(https://lh3.googleusercontent.com/-mX-R9oS8ViI/WAtK930_8LI/A5k/vKTn0ApcB0YiDG5hlzzepHcD8ydxDfaYQCLcB/s1600/BILD3323.JPG)
(htt
oh, okay, i know what they are, but by a slightly different name "Lock
Collars"
chris
In a message dated 10/22/2016 2:41:33 A.M. Eastern Daylight Time,
saunderspeter...@gmail.com writes:
All the collets are is a length of brass rod bored out to, in my case,
4mm, the rod by the way is 1
will have to see what they look like when you get to them.
how exactly do they work?
chris
In a message dated 10/22/2016 1:06:38 A.M. Eastern Daylight Time,
saunderspeter...@gmail.com writes:
Hey Chris, I didn't think of those two ideas of yours, I'm actually going
to make some collets
i would think he'd either drill a hole and use a cotter pin and washer or
thread the end and use a nylon lined nut
chris
In a message dated 10/21/2016 5:52:39 P.M. Eastern Daylight Time, jmaxh
l...@gmail.com writes:
And how will you secure the wheels on the torsion bar??! Very nice built
okay, so the metal strap is covering the secured end - got it.
chris
In a message dated 10/19/2016 10:51:34 P.M. Eastern Daylight Time,
saunderspeter...@gmail.com writes:
The hull is double thickness of 12.5 mm ply with 4mm hole at the anchor
point of the torsion bar. The bar is bent wit
how are you securing the far ends of your torsion bars so they don't slip
while still allowing the neighboring torsion bar to move freely?
In a message dated 10/19/2016 1:15:01 A.M. Eastern Daylight Time,
saunderspeter...@gmail.com writes:
Well got the suspension finished, a few more of th
I found this interesting and thought you would too:
_MINI SERVO MOTOR_
(https://www.sciplus.com/p/MINI-SERVO-MOTOR_57495?trk_msg=LVM64DSKF54KH86UMR3P8FPOB4&trk_contact=F1N7A23SVCNN1CIL3T7E54G4RO&utm_sour
ce=Listrak&utm_medium=Email&utm_term=https://www.sciplus.com/p/MINI-SERVO-MO
TOR_57495&utm_c
ah, that's how you did it. i wasn't quite sure. nicely done!
chris
In a message dated 10/18/2016 12:18:46 A.M. Eastern Daylight Time,
n...@live.dk writes:
(https://lh3.googleusercontent.com/-NFu5_VUjuq4/WAWilkgKzGI/A5M/vU-Zpl3g1a4PHZ5Uf3I8O_3joOGRWcMigCLcB/s1600/BILD3046.JPG)
how do you connect your track links?
chris
In a message dated 10/17/2016 1:30:04 A.M. Eastern Daylight Time,
n...@live.dk writes:
(https://lh3.googleusercontent.com/-YBqu7OsFA_U/WARhwG8X_mI/A4w/NdEl2jqvPo0LS4c62jTP-MQ_EB0iDPqUACLcB/s1600/BILD3317.JPG)
(https://lh3.googleus
those are nice looking tracks and wheels, just can't believe they are 3D
printed and look so clean, do you have any close up pictures of the track
links? how is the sprocket wheel holding up so far?
Chris
In a message dated 10/16/2016 1:53:06 P.M. Eastern Daylight Time,
n...@live.dk wri
_Click here: 3.5m Mini Android Endoscope-12.64 and Free Shipping|
GearBest.com_
(http://www.gearbest.com/microscopes-endoscope/pp_229387.html?vip=66522&utm_source=YGfacebook&utm_medium=WebsiteC&utm_campaign=FB1511)
not sure if this would be of interest to anyone in here, but..
c
almost looks promising
chris
From: notification+kr4maee4q...@facebookmail.com
Reply-to: nore...@facebookmail.com
To: odysseyslipw...@aol.com
Sent: 12/3/2015 8:42:49 A.M. Eastern Standard Time
Subj: AAF Tank Museum added a new photo
AAF Tank Mus
this is all there was in my email copy
From: 3219ca...@gmail.com
Reply-to: rctankcombat@googlegroups.com
To: rctankcombat@googlegroups.com
Sent: 10/5/2015 3:28:05 P.M. Eastern Daylight Time
Subj: [TANKS] M50 Ontos pictures
Looks something like an ear
uhm what pics?
chris
In a message dated 10/5/2015 3:28:05 P.M. Eastern Daylight Time,
3219ca...@gmail.com writes:
Looks something like an early Italian tankette. Also looks like they used
a TTS style track. Interesting!
--
--
You are currently subscribed to the "R/C Tank Combat"
afternoon on the news they showed Joe speaking about them quad-copter
drone thingies.
http://www.wearecentralpa.com/news/farmers-use-drones-for-work
chris
--
--
You are currently subscribed to the "R/C Tank Combat" group.
To post a message, send email to rctankcombat@googlegroups.com
To
does this mean there won;t be a weekend event this fall?
In a message dated 7/30/2015 8:22:12 P.M. Eastern Daylight Time,
anvil...@comcast.net writes:
The Maryland Addlepated Group (MAG) and Pennsylvania
Urbane Fighting Force (PUFF) are pleased to announce
a two day tank battle north of G
rubber grommets came to mind also but i knew that wasn't what they where
called
chris
In a message dated 7/16/2015 3:14:43 P.M. Eastern Daylight Time,
mxly...@cox.net writes:
They are called "recessed bumpers", or just "bumpers".
On Sunday, July 12, 2015 at 11:03:26 PM UTC-4, odyssey
i was just watching the commercial/ad on the beginning of a youtube video
and saw this _www.soloshot.com_ (http://www.soloshot.com) a bit
costly($400), but interesting
chris
--
--
You are currently subscribed to the "R/C Tank Combat" group.
To post a message, send email to rctankcombat@go
does this mean the fall battle would still be a 2 day even?
chris
In a message dated 6/29/2015 10:01:41 A.M. Eastern Daylight Time,
anvil...@comcast.net writes:
We are contemplating a two-day tank battle in July or August
near Gettysburg, PA to facilitate attendance by tankers outside
t
was part of the wife's vacuum...
chris
In a message dated 4/15/2015 8:30:58 P.M. Eastern Daylight Time,
3219ca...@gmail.com writes:
Very cool and very interesting, but what is it for?
On Wednesday, April 15, 2015 at 7:41:52 AM UTC-4, TyngTech wrote:
Latest from TyngTech labs, the
no denying that
In a message dated 4/7/2015 1:05:43 P.M. Eastern Daylight Time,
n...@live.dk writes:
He he-Pink was the only colour i had at the time-And its a nice colour to
lighten up inside the tank
Den tirsdag den 7. april 2015 kl. 03.58.01 UTC+2 skrev odyssey...@aol.com:
bubble
bubble-gum pink? any chance it floats about and the one motor gurgles and
belches out smoke?
chris
In a message dated 4/6/2015 3:08:02 P.M. Eastern Daylight Time,
n...@live.dk writes:
(https://lh3.googleusercontent.com/-zq2YCF0EV-M/VSLZc3ZA5II/AsQ/89cBY6M9Q8E/s1600/karosseri2.J
last Sunday in the adds there was a paper for "5 Below" and in it there
was the "Selfie Go Stick" and it looked like a winner for what i need to
finish those pill boxes. i went in last week and they were all sold out but was
told to come back in today as they get a truck on Mondays, so tonig
the driving
In a message dated 3/17/2015 5:13:59 P.M. Eastern Daylight Time,
steve...@gmail.com writes:
Which part, the tanks or the pubescent girls in mini skirts?
On Monday, March 16, 2015 at 8:07:27 PM UTC-4, odyssey...@aol.com wrote:
_Click here: Girls und Panzer Movie PV - YouT
_Click here: Girls und Panzer Movie PV - YouTube_
(https://www.youtube.com/watch?v=eHxZ9yYU3sw)
--
--
You are currently subscribed to the "R/C Tank Combat" group.
To post a message, send email to rctankcombat@googlegroups.com
To unsubscribe, send email to rctankcombat+unsubscr...@googlegroup
Cool Camo!
In a message dated 3/9/2015 3:32:06 P.M. Eastern Daylight Time,
3219ca...@gmail.com writes:
More progress.
(https://lh6.googleusercontent.com/-ZFht7enbgu0/VP30_08lv4I/AZg/Zwn4dBNQR8I/s1600/IMG_9185.JPG)
.
--
--
You are currently subscribed to the "R/C
looking good so far!
not sure how the rudder will help steer a land vessel, but you have me
curious
chris
In a message dated 3/8/2015 5:00:50 P.M. Eastern Daylight Time,
3219ca...@gmail.com writes:
Worked on framing out the body today.
Front hood ready to be drilled and pinned.
i think it's a mistake showing a video of it getting bogged down in the
snow - you know the powers that be will try to change the battle dates to
increase the chance it snowing
I was a little too aggressive and I got stuck in the deep snow and slush
no snow tracks/cleats?
chris
I
sacrificial gear is what i meant
chris
In a message dated 3/1/2015 1:02:24 A.M. Eastern Standard Time,
rctankcombat@googlegroups.com writes:
too bad that motor unit wasn't smaller as it looks like it would a great
shoe-in for a gun elevation motor
as to the plastic gear, i'm going to
too bad that motor unit wasn't smaller as it looks like it would a great
shoe-in for a gun elevation motor
as to the plastic gear, i'm going to guess that's there as some sort as
buffer in case things got jammed up somewhere - do they offer replacement
gears for it?
chris
In a message
pics?
In a message dated 2/26/2015 9:13:42 P.M. Eastern Standard Time,
tan...@gmail.com writes:
For smooth shafts with no keyways I use Fenner Trantorque keyless
bushings... They are quite expensive unless you find them on Ebay like I did.
The
come in metric and standard sizes. They c
i'm hoping it's just mice...
In a message dated 2/25/2015 1:23:32 P.M. Eastern Standard Time,
steve...@gmail.com writes:
Reminds me of the time I opened the old T-34 after a bit of setting and
found it stuffed with insulation. There was a nice and cozy mouse nest in
it.
ST
On Wedn
once fall arrives and it's too cold to use fiberglass resin in the garage i
normally don't go back out there (unless i need the gas jugs or the snow
blower) until spring.
the other day i went out to get the snow blower and as i entered to
doorway a few things looked out of place but since i
i still think that's a cool camo paint job you did on that road sign, looks
just like wood!
chris
In a message dated 2/19/2015 9:01:07 P.M. Eastern Standard Time,
3219ca...@gmail.com writes:
Motors and front wheels were ordered from Surplus Center; should arrive on
Monday.
If work
i thought Talons were no longer being produced?
chris
In a message dated 2/3/2015 11:50:19 P.M. Eastern Standard Time,
dwconn...@comcast.net writes:
I agree 100%.
If your goal is a working vehicle with an ESC, pick up a Victor, a Talon,
or something equivalent. Operational vehicles can
since when did a manufacture ever go that one extra step to pro-long the
life of something when they only want you to buy more?
chris
In a message dated 1/31/2015 4:54:53 P.M. Eastern Standard Time,
kunkmies...@gmail.com writes:
I have heard that storing alkaline batteries in the freeze
i keep forgetting to post about this
the other day on the news on Money Talks they were talking about how
freezing your metal/nickel (or something) batteries when you first get them
(new) it will increase their life span by as much as 2x's.
anyone else know or heard about this?
just thoug
never mind i just followed his link to the board and then went to the store
location button
chris
In a message dated 1/10/2015 11:50:57 P.M. Eastern Standard Time,
rctankcombat@googlegroups.com writes:
microcenter? is this some sort of store chain?
chris
In a message dated 1/10/201
microcenter? is this some sort of store chain?
chris
In a message dated 1/10/2015 1:28:40 P.M. Eastern Standard Time,
dwconn...@comcast.net writes:
Wow, that’s cheap ! Were they on clearance ? I was surprised to see
Arduino stuff in my MicroCenter, too. You might consider picking up a
got any bigger picture of that stuff?
chris
In a message dated 1/6/2015 9:00:11 P.M. Eastern Standard Time,
gr...@spudnet.co.nz writes:
Out of all the parts I have made so far the suspension must be one of the
biggest tasks, there’s so many of each piece J
Here is my just about comp
_Click here: And The Winner Of Hardware Battlefield 2015 Is… Voltera |
TechCrunch_
(http://techcrunch.com/2015/01/08/and-the-winner-of-hardware-battlefield-2015-is-voltera/?icid=maing-grid7|htmlws-main-bb|dl2|sec1_lnk1&pLid=595
624)
i just ran across this and thought how it could help (outsi
[Charlie Brown voice]THAT'S IT[/Charlie Brown voice]
thanks Doug! now i can continue sketching up some more of that product
line.
Happy Holidays all!
chris
In a message dated 12/26/2014 4:46:11 P.M. Eastern Standard Time,
dwconn...@comcast.net writes:
M-60 A2 ?
On Thurs
sorry, no.
wish i could remember more of it
chris
In a message dated 12/26/2014 9:04:59 A.M. Eastern Standard Time,
panthergol...@gmail.com writes:
Sherman 105?
On Thu, Dec 25, 2014 at 8:29 PM, OdysseySlipways via R/C Tank Combat
<_rctankcombat@googlegroups.com_ (mailto:rctankcom
i'm currently sketching up a new line of sci-fi gaming resin kits and
there's a metal toy tank that i remember having as a kid. it was a US tank, i
think it was a Sherman variant, the turret was round at the base and it think
it had a shorter barrel then normal. i'd know it if i saw it again.
still, $40 for manual labor for cutting it all, i think would be hard to
beat
chris
In a message dated 12/24/2014 2:54:35 P.M. Eastern Standard Time,
todjo...@comcast.net writes:
No lasers in this shop. All old fashioned machinery. All of the parts were
basic straight cuts. Nothing fan
wow, that sounds cheap!
chris
In a message dated 12/24/2014 1:26:31 P.M. Eastern Standard Time,
todjo...@comcast.net writes:
I took the drawings to my local metal supply shop and had them cut it out
for me. The 1/6 Abrams hull and turret in 20 gage steel was only about $40.
Tod
interesting - i'll have to keep that in mind
In a message dated 12/23/2014 10:45:53 P.M. Eastern Standard Time,
jc22...@gmail.com writes:
yeah. Just use aluminium flux and argon gas.
On Tue, Dec 23, 2014 at 7:32 PM, OdysseySlipways via R/C Tank Combat
<_rctankcombat@googlegro
h harder to weld; electric arc welding conductive
materials...
On Tue, Dec 23, 2014 at 4:09 PM, OdysseySlipways via R/C Tank Combat
<_rctankcombat@googlegroups.com_ (mailto:rctankcombat@googlegroups.com) > wrote:
i don't know about welding but have heard it's different from we
l would be the most
important trade off - or so i would think.
In a message dated 12/23/2014 7:03:57 P.M. Eastern Standard Time,
jc22...@gmail.com writes:
True. But is it more expensive or harder to work with?
On Tue, Dec 23, 2014 at 4:03 PM, OdysseySlipways via R/C Tank Combat
<
weight and doesn't rust
In a message dated 12/23/2014 6:59:00 P.M. Eastern Standard Time,
jc22...@gmail.com writes:
I see a lot of guys have opted for Aluminium. I am planning on using cold
rolled steel, does Aluminium offer any perks?
--
--
You are currently subscribed to the "R/C Ta
_www.track-link.com_ (http://www.track-link.com) was the site i was
looking for, found it by searching my emails for "registration"
In a message dated 12/16/2014 1:18:03 A.M. Eastern Standard Time,
rctankcombat@googlegroups.com writes:
i just went through my saved fav's and can't find
i just went through my saved fav's and can't find it as well as looking for
anything in my emails (old and new) that either have "welcome" or "reply"
or "sign in" or "pass word" seeing if i can find the first auto email from
the site but haven't had any luck yet.
i don't recall the name of
thanks! didn't know any of that was possible, will have to give it a try
In a message dated 12/8/2014 9:45:57 A.M. Eastern Standard Time,
mxly...@cox.net writes:
Use Chrome browser.
Right-click on image.
Select "Search Google for this image".
OR
In some other browser:
Right-click the
chris
--
--
You are currently subscribed to the "R/C Tank Combat" group.
To post a message, send email to rctankcombat@googlegroups.com
To unsubscribe, send email to rctankcombat+unsubscr...@googlegroups.com
Visit the group at http://groups.google.com/group/rctankcombat
---
You received this
_Click here: Military Vehicles and Hardware_
(http://www.papermodelers.com/forum/vbdownloads.php?do=main&perpage=20&categoryid=9)
not sure if it's of interest to anyone, but
chris
--
--
You are currently subscribed to the "R/C Tank Combat" group.
To post a message, send email to
1 - 100 of 193 matches
Mail list logo
