of course, u will need do that
On Sun, Mar 17, 2002 at 10:29:23AM +0800, Roger wrote:
hi there
can you tell me the procedure about how to patch the kernel? after i finish
zcat path.x.x.gz | patch -p0, what eles do i have to do? do i still run make
menuconfig, make dep, make clean, make
On Saturday 16 March 2002 07:06 pm, Gordon Messmer wrote:
OK, here I included the log file after I did what you asked. I had
previously tried to installed a S3 pci card, in an attemp to determine
the problem. I was checking if the S3 pci card would work better. Turn
out that the card only
Hi guys...
I have a question for you...if anybody can help me, please do so.
How can I redirect traffic that comes to port 80 (www) to port 8080, the
port for my squid web cache?
I have a lot of windoze clients that always change the options in
IENetscape so they navigate the
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Alex Iruc wrote:
I have a question for you...if anybody can help me, please do so.
How can I redirect traffic that comes to port 80 (www) to port 8080, the
port for my squid web cache?
I have a lot of windoze clients that always
Hi all,
Wondered if there was a good way to get web stats from 2 or 3 machines we
are setting up as web servers in a server farm. We could have them all
write to an NFS mounted logs directory on another machine but wanted to know
if there was a better way. Is there a way that 1 hard drive can
Hi All,
Can framebuffer be used with grub? If not can grub be configured to use
framebuffer? Don't really want to reinstall 7.2 if it's not necessary.
Bill
[EMAIL PROTECTED]
GET INTERNET ACCESS FROM JUNO!
Juno offers FREE or
On Sun, 17 Mar 2002, Billy R Nordyke wrote:
Hi All,
Can framebuffer be used with grub? If not can grub be configured to use
framebuffer? Don't really want to reinstall 7.2 if it's not necessary.
Bill
[EMAIL PROTECTED]
On Fri, 15 Mar 2002, Janyne Kizer wrote:
backup from sun:
TAPEDRIVE=/dev/rmt/0
WORKDIR=/export/home/SUNarchive
tar -cvf $TAPEDRIVE $WORKDIR/passwd
restore to linux:
TAPEDRIVE=/dev/rmt/1
WORKDIR=/local/restore
cd $WORKDIR
tar -xvf $TAPEDRIVE
At this point we get a file not found
my zoom voice fax modem works under 6.2 but not 7.2 the hardware
detection say's it been removed i have tried telling it keep the
hardware 2 keep the modem but no good its an isa card on com 2 irq 3
7.2 see's my sound card isa awe64 on irq 5 under windows 6.2 don't see
card i tried both upgrade
On 16 Mar 2002, Gordon Messmer wrote:
On Sat, 2002-03-16 at 14:27, Mike Burger wrote:
On 16 Mar 2002, Gordon Messmer wrote:
Doesn't really change my point. There's only so much bandwidth
available to the PCI bus. The PC architecture isn't going to process an
infinite number of
Hi,
Have made the change in Grub. Added vga=692 to the bottom of the first
section as below:
title Red Hat Linux (2.4.9-31)
root (as listed, didn't change anything)
kernel (as listed, didn't change anything)
initrd/initrd-2.4.9-31
vga=792
How do I bring this up? Do
On Sat, 16 Mar 2002, David wrote:
Hi,
I read the man page for njamd (not just another memory debugger) and
followed the instructions to first:
export LD_PRELOAD=libnjamd.so
and then run my program.
However, I could not even get my program to start running. And even a simple
'ls'
On Sun, 17 Mar 2002, Bill Crawford wrote:
You might want to add
export NJAMD_ALLOW_FREE_0=1
You might also need NJAMD_NO_TRACE=1, there's a comment in the man
page that says:
NJAMD_NO_TRACE=1
When debugging programs that use libraries compiled with
On 16 Mar 2002, Gordon Messmer wrote:
I just uploaded rpm packages of the XenoStep and Xenophilia GTK+ theme
engines to my ftp server. While trying to patch XenoStep, I ran into
difficulty. All of its included themes have spaces in their filenames.
If I want to modify a gtkrc file, I can
Hi.
Where is gtk-config gone.
I have installed rpm gtk+-1.2 and gtk+-2.0 but an
application I try to compile complain about missing
gtk-config. I cant find it on my computer which have
rh 7.2 installed.
=
Investigating the Norwegain 4.th Service
with the multiheaded troll logo.
dig around in /usr/local/bin
you could have typed locate gtk-config since most RH systems have
support for the locate command :)
On Mon, 18 Mar 2002, Kjetil Tjensvold wrote:
Hi.
Where is gtk-config gone.
I have installed rpm gtk+-1.2 and gtk+-2.0 but an
application I try to compile
On Sunday 17 March 2002 09:51 am, Alex Iruc wrote:
Hi guys...
I have a question for you...if anybody can help me, please do so.
How can I redirect traffic that comes to port 80 (www) to port 8080, the
port for my squid web cache?
I have a lot of windoze clients that always
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hi
I recently installed hylaFAX in my machine.. but when I want to send a fax I
just receive this message:
request id is 30 (group id 30) for host localhost (1 file)
but the fax isn't sended... when I use faxstat receive this:
HylaFAX scheduler on
Is your error during compile like this :
checking for GTK-- - version = 1.2.3... no
*** Could not run GTK-- test program, checking why...
*** The test program failed to compile or link. See the file config.log for
the
*** exact error that occured. This usually means GTK-- was incorrectly
Hi there again.
I got RH 7.2 installed on a box and need to add the
third HD to it. Running df I can see that the filesystem on the to HD's
originally on the machine is ext3. Running fdisk on the third IDE HD 'fdisk
/dev/hdc' gives me some trouble.
This is fdisk version 2.11f. Listing
On Sun, Mar 17, 2002 at 07:40:04PM -0500, Garf DeLong wrote:
Is your error during compile like this :
checking for GTK-- - version = 1.2.3... no
*** Could not run GTK-- test program, checking why...
*** The test program failed to compile or link. See the file config.log for
the
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Ragnar Wiencke wrote:
1.. This is fdisk version 2.11f. Listing the known partition type
does not show me ext3 nor ext2, so I chose type '83 Linux' and then
primary no1. Is that correct?
Yes, that's fine. You get ext3 by creating ext2 with a
There are5 basic steps to getting a new hard
drive working:
1. partition the drive with: fdisk
/dev/hdc
2. create a file system on the new partition
with: mke2fs
3. create a mount point: mkdir
/mnt/hdc1
4. mount the drive: mount /dev/hdc1
/mnt/hdc1
5. edit fstab and put the entry there.
If you are using a firewall, it is easier and more efficient just to block
outbound port 80 and open outbound port 8080 - force your users to use 8080.
Yes, it's true, but I don't want that...I what to redirect port 80, not to
block it.
Alex
___
On Sunday 17 March 2002 06:29 pm, you wrote:
I recently installed hylaFAX in my machine.. but when I want to send a
fax I just receive this message:
request id is 30 (group id 30) for host localhost (1 file)
but the fax isn't sended...
You've put it in a place where the script isn't looking. Run './configure
--help |grep -i gtk' and see if there is a command line option to tell
it where you have put GTK.
These are the options I have:
--with-gtkmm-prefix=PREFIX
--with-gtkmm-exec-prefix=PREFIX
--disable-gtkmmtest
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
badger wrote:
How can I redirect traffic that comes to port 80 (www) to port 8080, the
port for my squid web cache?
I have a lot of windoze clients that always change the options in
IENetscape so they navigate the web without proxy..
If
On Sun, 17 Mar 2002, David Talkington wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
badger wrote:
How can I redirect traffic that comes to port 80 (www) to port 8080, the
port for my squid web cache?
I have a lot of windoze clients that always change the options in
Hello,
Through several kernel versions on three different machines, I have
had strange problems after using NFS. The three machines form an
ethernet LAN and I need to use NFS to install software (including the
RH updates) on one of the machines which lacks a working CDROM.
At first I wasn't
jimmy keffer wrote:
my zoom voice fax modem works under 6.2 but not 7.2 the hardware
detection say's it been removed i have tried telling it keep the
hardware 2 keep the modem but no good its an isa card on com 2 irq 3
7.2 see's my sound card isa awe64 on irq 5 under windows 6.2 don't see
card i
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Ben Logan wrote:
At first I wasn't 100% sure that the problem was caused by NFS, but
I'm sure now.
Convince us.
When you say within hours of using NFS, does that mean within hours of
a) starting specific daemons (which ones?), b) mounting
On Sun, 2002-03-17 at 14:42, Joe Bifano wrote:
Hi all,
Wondered if there was a good way to get web stats from 2 or 3 machines we
are setting up as web servers in a server farm. We could have them all
write to an NFS mounted logs directory on another machine but wanted to know
if there
try whereis gtk-config
- Original Message -
From: Statux [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Monday, March 18, 2002 7:53 AM
Subject: Re: Where is gtk-config gone
dig around in /usr/local/bin
you could have typed locate gtk-config since most RH systems have
support for the
no. I was told that it was not a good way to do it. What is your
experiance with syslog?
Joe
- Original Message -
From: Charles Galpin [EMAIL PROTECTED]
To: Redhat List [EMAIL PROTECTED]
Sent: Sunday, March 17, 2002 8:16 PM
Subject: Re: Stat logging on multiple servers
On Sun,
Hello every one!:
Lets see now, this is my thing my wife is getting unrequested
mail each day in her
mail box, and she wants me to block that people, from send her e-mails.
She acces the web trhugout my box, and she is using M$-Outlook. My
question is, If she getting her mail from
ps == pochy s pochy writes:
ps Hello every one!:
ps Lets see now, this is my thing my wife is getting unrequested
ps mail each day in her
ps mail box, and she wants me to block that people, from send her e-mails.
ps She acces the web trhugout my box, and she is
I have an M810 SiS motherboard and have good vga video, but have been working
for weeks to get printing and sound working. No success, so far.
Had good color printing with gimp at first , but now I have screwed that up
trying to get cups and gimp-print installed.
./configure gimp-print
1.. This is fdisk version 2.11f. Listing the known partition type does not show me
ext3 nor ext2, so I chose type '83 Linux' and then primary no1. Is that correct?
partition types and filesystems are different things. fdisk only
understands partitions.
2.. How do I edit the fstab file?
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hello David,
Monday, March 18, 2002, 3:45:31 AM, you wrote:
DT -BEGIN PGP SIGNED MESSAGE-
DT Hash: SHA1
DT badger wrote:
How can I redirect traffic that comes to port 80 (www) to port 8080, the
port for my squid web cache?
I have
39 matches
Mail list logo