[Repeater-Builder] Looking for Midland Manual

Greetings Does anyone have a manual for a Midland 70-342 BXL or AXL(?) mobile radios? ~Benjamin, KB9LFZ Moderator Central Get answers to

[Repeater-Builder] Replacement Ferrite Cores

Greetings All - Looking for some replacement ferrite cores. Need 2 sizes: 6mm x 3mm and 8mm x 4.5mm. Need a couple of each size. Can anyone out there provide a source for these or maybe part with a few from the personal stock ?? Thanks Doug N3dab

Re: [Repeater-Builder] Duplexers

Decibel did make a 6 cavity notch duplexer - 4" full sized cavities - that would work nicely on a 110 Watt M2 station @ 600 kHz. Isolated TEE test into a dummy load - how bad is the receiver desense ? If you don't have some test equipment - signal gen, dummy load, and a TEE fitting with the sid

RE: [Repeater-Builder] Duplexers

Vern, Did this problem exist before you had the duplexer tuned? Was anything at all done to your repeater system just before the problem was noticed? A band reject (notch) duplexer may be incapable of performing even satisfactorily at 2m. Please advise the model number of your duplexer, so we c

[Repeater-Builder] UHF Super StationMaster 1151-2N For Sale

Hi All, Repeater Builder has always been a great source of info for me, so I was hoping one of you might be able to point me in a better direction. Here in Massachusetts, several 440 MHz repeaters (including mine) had to shut down due to PAVE PAWS radar. I had JUST purchased a brand new Stat

[Repeater-Builder] Digital Voice Recordings

Hello all, I have added more digital voice vs FM and SSB sound bites to the N6DVA web site (decoded and un-decoded). http://www.hamradio-dv.org ALINCO AOR D-Star Motorola P25 Motorola Mototrbo Have Fun ! Paul Metzger K6EH Digital Voice Amateur Radio Association N6DVA

Re: [Repeater-Builder] Duplexers

I had them tuned because I had just bought them and didn't really trust that they were right. They were very far out so it's good that I got them tuned. I was having the same problem as now though very poor receive. Right now I have a radio on there for receive that was getting about 30 mil

Re: [Repeater-Builder] Duplexers

I would be quite surprised if you are NOT having desense with a Mastr II and a 6 can notch only duplexer at 600 khz Typically a 6 can reject only duplexer is not sufficient isolation at 600khz for 2 meters with a solid state PA.. Vertical separation or a pass/reject duplexer will be needed.

Re: [Repeater-Builder] Duplexers

Time for an isolated TEE test with a dummy load. Why did you have the duplexers tuned ? Was there a problem prior? You should be able to split the duplexer without any trouble - just mark things so you can go back as it was. Best luck and 73, Steve NU5D [EMAIL PROTECTED] wrote: > I am having

[Repeater-Builder] Duplexers

I am having some receive problems on my repeater and I am thinking that it might be desense. I am on 2M running a MASRII repeater with a Decibal Products band reject 6 can duplexer. While I can key the repeater from a pretty good distance the audio that makes it through the repeater drops off

Re: [Repeater-Builder] VHF Repeater Antenna

I have had great service out of an Antennex 5 dbd UHF fiberglass antenna. It is mounted near the top of a 2000' tower and has been up for maybe 8 years with no problem at all. It was to be a temporary replacement for a DB420 but since it is working, I just never got around to swapping them out. I

[Repeater-Builder] FW: Uniden MRS-915 Repeater

I originally posted this request on the Manual_Exchange list, but have gotten no replies - so I will try here. Please pardon the bandwidth if this is OT... PLEASE - I'm looking for any manuals - or any other data - for the Uniden MRS-915 series repeater. I have been given one in pieces and need

[Repeater-Builder] Re: Mitrek Question

No problem Randy... Mitrek radios make good repeaters as long as you don't run a lot of power within the chassis. It's probably better to run two radios (one tx, one rx) if you plan to use the high power output tx radio. I buy my crystals direct from Bomar and re-rock the channel elements

RE: [Repeater-Builder] Re: NFCC votes to recommend FCC treat all repeaters as repeaters

You just showed your age. Paul -Original Message- From: Repeater-Builder@yahoogroups.com [mailto:[EMAIL PROTECTED] On Behalf Of Kris Kirby Sent: Saturday, September 22, 2007 11:00 PM To: Repeater-Builder@yahoogroups.com Subject: Re: [Repeater-Builder] Re: NFCC votes to recommend FCC t