[Repeater-Builder] Repeater cabinets for free

I have two repeater cabinets to give away. They are 5 1/2 and 6' tall. Deep cabinet double rail. Avalable now in Brooklyn, NY. I can be reached at 718-999-1436 Thanks Rich N2ROW

[Repeater-Builder] Off topic. NYC Amatuer Repeater network looking to link to NJ,NY, CT

Sorry for the off topic.Where better than here to ask this question. We are looking for amatuer repeaters to link into us. In upstate NY, NJ, CT. Or we are willing to trade repeater sites to add a new repeater. contact me via email or 718-999-1436 Thanks 73 Rich N2ROW www.n2row.net Yaho

[Repeater-Builder] Re: midland 13-509 220mhz to convert to repeater

I have a spectrum 220 rec. It worked well in a site by it self. But once I transferred it to the main site ful of wonderful pager Tx and other com repeaters in the same site. Forgetaboutit. Regardless of how much filtering. So we went to a Micor Rec. Problem solved. Rich/N2ROW >>> [EMAIL PROTECTE

Re: [Repeater-Builder] 7K controller

I use my 7k with two full repeaters linked The Ids work fine evert 10 m they go off one at a time. As far as the the Time out timer for repeater 2 use what ever comers with your Tx. Rich N2ROW >>> [EMAIL PROTECTED] 7/18/05 6:46:54 PM >>> The problem is that there is one timeout timer, one carrier

Re: [Repeater-Builder] Hooking up the main receiver in a voting system

Mathew, we are completing the same project for my UHF system as well. Your main should be port 1 on the RVS-8 and the voting rec at the main site should go to port 2 and port 3 depending on how many aux rec sites you have. The output of the RVS-8 controller will go your main controller. My partn

Re: Re: [Repeater-Builder] Hustler G6-440

ting as I have a couple of low level repeaters with G6-440's in a temperate climates which have not degraded in performance. I wouldn't want to use a G6-440 in an environment which sees any ice and wind, they are too frail for that environment. Steve WA6ZFT > > From: "

Re: [Repeater-Builder] Hustler G6-440

I started off with the 2 G6-440 my self. It lasted about a year before the SWR started flying thru the roof and the second about 7 months after that. Pattern was ok while it lasted. Go for DB products and save yourself from headaches later. Good Luck Rich/N2ROW >>> [EMAIL PROTECTED] 2/9/05 8:24:

Re: [Repeater-Builder] Need Spectrum Commnuications Receiver & Transmitter Info.

I have an scr1000 220 repeater. Its possibly the same. Call me. 718-999-1436 Rich/N2ROW >>> [EMAIL PROTECTED] 11/14/04 6:33:12 AM >>> Any model numbers? Photos? Joe --- n6nxi <[EMAIL PROTECTED]> wrote: > > > > Hi All. I have tried to establish contact with > Spectrum for the > following

[Repeater-Builder] Maxon SMP4000 Eprom Programmer

Does anyone know how to default this programmer. It is asking for a password. Thanks Rich/N2ROW Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <

Re: [Repeater-Builder] Syntor X

If you email me directly I can send you the schematic. Other wise open the top cover. Look somewhere in the middle. look for the component labeled 440. Put a meter on it you should get voltage for cor. I use them for a 6 and 10 meter repeater. [EMAIL PROTECTED] >>> [EMAIL PROTECTED] 6/8/04 2:0

[Repeater-Builder] VHF Syntor X

Can this unit be programmed to the ham band without modifications. I would like to use one as a Transmitter on 2 meters only??? Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an

Re: [Repeater-Builder] 220 mobile

I use a Icom 37A. It has the speech synth. your looking for. The module comes as an extra. 73 N2ROW >>> [EMAIL PROTECTED] 03/25/04 07:43AM >>> Does anyone know of a new or older 220 mobile that was (is) made with a voice synth. in it? Kind of like the vs-3 chip that is in the Kenwood stuff. Wan

[Repeater-Builder] vhf cellwave

I have a VHF cellwave which has a faded label. I cant tell what model it is. However the freq stamp was still clear at 154. MHZ. The antenna tip has a fiberglass whip. Can I replace that whip to tune for 220 MHZ. If so what would be the overall length of the antenna?? Yahoo! Groups Links

[Repeater-Builder] Re: Kenwood TK 840

#x27;ve got your CSI 32 information and will be sending it in my next outbound email. Watch your email box. > "Richard Velez" <[EMAIL PROTECTED]> wrote: > > Anyone know where to pull a cos line out of this radio?? Only when PL is detected. Thanks > Rich/N2ROW

[Repeater-Builder] Kenwood TK 840

Anyone know where to pull a cos line out of this radio?? Only when PL is detected. Thanks Rich/N2ROW Yahoo! Groups Links To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ To unsubscribe from this group, send an email to: [EMAIL PROTECTED] Your use

RE: [Repeater-Builder] Motorola Syntor, any good?

I use them as a 10 meter and 6 meter repeater. No problems. Just use cooling fans and your done. If the Tx goes just swwap the radios and the module and your on the air again. 73's Good Luck Rich/N2ROW www.n2row.net >>> [EMAIL PROTECTED] 11/24/03 11:19PM >>> The SRA series Syntors will make e

Re: [Repeater-Builder] Kenwood TK-840-1

necesary. If you only want to adjust the microphone sens. you only have to open the radio top and botom, take the front apart, in the components side will be a variable resistor just above the mic. conector , this is the microphone sensibility control hope this helps Juan Richard Velez wro

Re: [Repeater-Builder] Kenwood TK-840-1

I went into test no options for mic audio is shown. >>> [EMAIL PROTECTED] 11/12/03 05:50PM >>> There should be a TEST option under the Program pull down.. -Pete Richard Velez wrote: > I have the software. Were on the menu controls this setting > > >>>

Re: [Repeater-Builder] Kenwood TK-840-1

I have the software. Were on the menu controls this setting >>> [EMAIL PROTECTED] 11/12/03 05:33PM >>> Richard, it's through the software or via the front panel but ONLY if the radio is programmed to allow you to get into this mode on power up.. Good Luck, Pete Richa

Re: [Repeater-Builder] Kenwood TK-840-1

Does anyone know how to increase the mic audio on this radio?? Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/