Ken,
Your A Great American ;-)
Robert
In some circles, Rush Limbaugh makes great repeater ID's (as does
Sean
Hannity!). Besides, if I listen to one more repeater QSO about the NBA
thing, I'll scream! :-)
Ken
Juno Platinum
This is a problem that has plaqued me now for months...and I can't seem
to find out what the problem is. I have a Micro Computer Concepts
converted GE Mastr Exec II UHF repeater the built in RC100 controller. I
also have a TM-G707 as a remote base. The problem I have is that
sometimes the
Hey Coy,
I have a Diamond X-3200A that was used for my repeater antenna till I got
a DB-420...now it is my remote base antenna. When the antennas were
changed out we took it apart and to our amazement it was like poured out
a pitcher of water on the ground (and this was before the hurricanes
Hams make the best musicians ;-)
I have had several of my little musicians become hams :-)
http://www.jcboothband.org
I get to teach 265 of those little ones each day. Don't have our group
playing it...but if you look under the Symphonic Band music...there are
a couple of pieces we played at a
Curious,
Once upon a time I saw some talk about a interface that would work with a
bag cell phone. Does anyone have that interface that could shed some
light on the issue?
Thanks,
Robert
The best thing to hit the Internet in years
With the talk of 2 rx'ers on one antenna...what about this;
I have purchased a RC210 for my repeater. Here is what on the repeater;
GE Mastr II UHF running 60 watts out of cans
ARR preamp
DB420 at 190'
TM-G707 remote base
Diamond Tribander at 125' (for remote base)
Moto. B/R 1500 series cans
I
Has anyone played around with the pin 6 on these radios to see if it
would except dtmf's direct to change freq.s? It is the remote control
pin...but not sure what it is looking foraudio or voltages.
Robert
The best thing to
I am considering upgrading to a RC 210 controller over the summer. I
have a RC100 (from MCC) that I married with a CSI CS1688 latch board to
work with a TMG707 and a IC3AT for a remote base system. Worked great. I
took the controller and WAS going to put it into a cleaner looking
box...but never
I mentioned this problem to the group a couple of weeks agosame thing
is happening with a little more info.
MCC Converted GE Mastr Exec II with built in RC100 w/TS64 (UHF)
ARR Preamp
Motorola B/R Cans
DCI UHF Filter (10c) between the repeater antenna and duplexer.
Kenwood TNG707 for the
Thanks Mike for your reply,
The cool thing about the MCC converted stuff is that the controller is on
the inside of the GE. The only openings are holes that are drilled above
the pa section for a fan. There is a harness but it is for the remote
base which plugs into the db-15 on the front of the
Does anyone know of a new or older 220 mobile that was (is) made with a
voice synth. in it? Kind of like the vs-3 chip that is in the Kenwood
stuff. Want it to be able to read out the freq. or channel when changed.
I know even some of the older rigs that would do this since I have a
Kenwood
I will take a look at that. I should have stated, the audio is still
there...but it just gets obviously softer. That is what so weird. It
just doesn't go awayjust sounds like someone is turning the deviation
down ;-)
Thanks,
Robert
Message: 12
Date: Thu, 25 Mar 2004 07:08:16 -0600
Getting ready to put a DCI (UHF) filter on my repeater. With this in
line, do I need to retune my rx side of the cans? I have the Mot. 4 can
band pass/reject kind of cans (1506?).
Thanks,
Robert
The best thing to hit the Internet
Curious if anyone else has had this problem.
I get the my Group emails via digest...so I get them once a day. It
has been a busy week so I didn't notice until todaybut 2 of my groups
(this one included...and have to check if there are more) were bouncing
for some reason. My mailbox was not
Can't believe it. Not only was the PL not working...but all the LEDs on
the front panel was out. There is a plug on the top from that panel. I
had missed putting it on all the pins by one. Can't believe the thing
worked or didn't burn up. It just took out the pl...and the LEDs. Move
it over
Speaking of tuning the duplexers that is. I have seen it done both ways
with good results. Opinions? ;-)
Thanks,
Robert
The best thing to hit the internet in years - Juno SpeedBand!
Surf the web up to FIVE TIMES FASTER!
Only
16 matches
Mail list logo