Try a micor amp
Ebay 220614543178 220611329293
--- In Repeater-Builder@yahoogroups.com, Wayne wa5...@... wrote:
After years of operation our tried and true 6M repeater died. This repeater,
in Arkansas, is located on the highest point between the Rocky Mountains and
the Smokey Mountains
Sorry guys, I should have told the list I have no association with the seller,
saw it today and was just trying to help.
I have a micor uhf amp and it is a killer.
Denny
--- In Repeater-Builder@yahoogroups.com, Tim tahr...@... wrote:
Hi Wayne,
That was the text in one of the e-bay
!!
73, Dick, W1KSZ
-Original Message-
From: dgrapach dgrapach@
Sent: Jun 2, 2010 9:27 PM
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-Builder] Advice on 40 year old radio tower
I need advice on using an old radio tower. It looks like to be the size
I checked the drain hole on that brace and their is another one at the other
end on the bottom, anyhow, you ARE RIGHT IT HAS 40 YEARS OF
WEATHER ON IT. To many red flags. After a reveiew of the messages and I would
like to use it, I think I am going to pass this one up.
After all safety is
???
8On 03/06/2010 20:47:07, dgrapach (dgrap...@...) wrote:
I checked the drain hole on that brace and their is another one at the
other end on the bottom, anyhow, you ARE RIGHT IT HAS 40 YEARS OF
WEATHER ON IT. To many red flags. After a reveiew of the messages and I
would like
/2010 21:29:15, dgrapach (dgrap...@...) wrote:
Yea I know I didn't
do to good in English class, I
didn't know which
their
to put their... and I still
don't know..
--- In Repeater-Builder@yahoogroups.com, Doug Hutchison
specialq.que@ wrote
I need advice on using an old radio tower. It looks like to be the size of a
45G, the cross bars are bolted on instead of welded. The
tower looks as if it is ok, light surface rust, bolts look ok on the
outside, of course can't see inside. Heavy rust and pitting on several guy
wires,
guys
I don't know if I can put the pictures on..
--- In Repeater-Builder@yahoogroups.com, Lee Pennington localjunkpedd...@...
wrote:
Pictures would help,
On Wed, Jun 2, 2010 at 9:27 PM, dgrapach dgrap...@... wrote:
I need advice on using an old radio tower. It looks like to be the size
. Solomon w1...@... wrote:
Tower location is an important piece of the equation. Big difference
between the East Coast and the Sonoran Desert !!
73, Dick, W1KSZ
-Original Message-
From: dgrapach dgrap...@...
Sent: Jun 2, 2010 9:27 PM
To: Repeater-Builder@yahoogroups.com
Subject
The pictures are here of the tower.
http://s903.photobucket.com/albums/ac231/dgrapach/Old%20tower/Old%20Tower/
--- In Repeater-Builder@yahoogroups.com, dgrapach dgrap...@... wrote:
Very true,this tower had it's guy wires in the woods under the trees, the
site was abandon for years
the one I'm thinking it might be.
Joe M.
dgrapach wrote:
Very true,this tower had it's guy wires in the woods under the trees, the
site was abandon for years.
Where and how do I find an engineer to inspect it. I am in Indiana county
pa. Is it feasible to change guy wires, do
Hi Group,
Anybody have any info on a wilsom 440 amp. WAU-25100 looking for input
drive power, amp usage, Maybe a web site for info. Maybe I can modify
it for repeater use.
Thanks for any help
Denny
Ka3sxq
--- In Repeater-Builder@yahoogroups.com, Eric Lemmon [EMAIL PROTECTED]
wrote:
That last comment about the spectrum analyzer is an excellent
suggestion.
Trying to solve such interference problems with cavities or
isolators may
involve far more effort and expense than necessary. Here's a
--- In Repeater-Builder@yahoogroups.com, George Henry [EMAIL PROTECTED]
wrote:
Maybe his computer is running on UTC?
- Original Message -
From: [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Friday, July 27, 2007 5:16 PM
Subject: Re:
is your path distance? Line of sight?
Randy
WB0VHB
dgrapach wrote:
Does anyone know where or does anyone have any primestar dishes
they
would want to part with in and/or around the Indiana county
area. I am
wanting to make a 2.4 ghz reapeater hop. These are the old oval
Does anyone know where or does anyone have any primestar dishes they
would want to part with in and/or around the Indiana county area. I am
wanting to make a 2.4 ghz reapeater hop. These are the old oval
fiberglass dishes. The finances are low on this project.
Thanks for the off topic entry.
--- In Repeater-Builder@yahoogroups.com, [EMAIL PROTECTED] wrote:
At 7/10/2007 20:42, you wrote:
Bravo to you for doing the right thing! Far too many people
these days are
in a rush to get a repeater on the air right away, and figure
that it's okay
to bypass the compensation steps. I
Hi all,
I am looking for two good used motorola micor mics.
Any body have any, contact me off list.
Thanks
Denny
Ka3sxq
Hello,
I am looking for replacement coils for a GE Phoenix SX radio. They are
L08 and L502. Both are made by Toko electronics.
L08 has the following numbers on it:
19A
7033
11P1
L502 is labeled:
19BB
0102
3P1
Does anyone know what values these are and where I could get them?
I just aquiried a KDK 4033 220 mobile with the mic needing wired up to
the plug, I understand that it is the same as the 2033 2m , not
shure.I looked inside the radio thinking that I could trace the
wires , but it looks to risky just to take a chance at it. I Googled
it with no success . Does
I am looking for an inexpensive programmer to program PICs for a
repeater controller. I would also like to program EEPROM's
occasionally. I found an universal programmer on Ebay called TOP2004
made by ColdFusionX that is powered from an USB port. It claims to
program PIC's, AVR's, and most
Need help cutting cable lengths
How do I cut odd multiples of quater waves, on a 75 ohm cable Belden
8213 84 % velocity factor. I tried using 984 / freq 445.000.
Fifth multiple is 27.869 inches. Do I measure overall length after I
install connector? Cable is terminated with a 100 ohm
Does anybody know if the atten or madell spectrum analyzers on ebay
are any good.
Thanks
Denny
ka3sxq
Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
* To unsubscribe from this group, send an email to:
[EMAIL
Hellow All
The mixing problem sounds like the one I had a while back. We had
intermod on our repeater, and had your symtoms. The intermod was
mixing with our receiver if frequency 10.7, which was the if plus the
transmit output. I
I am looking for a Micor to build a 220 mhz repeater. I was told the
micor is the one to look for . What are the model numbers I should
look for in the micor line to convert and where can I get one ?
Thanks
Denny
Yahoo! Groups Links
* To visit your group on the web, go to:
I have a 440 repeater transmitting 442.850 and receiving on 447.850.
We are hearing interference on the repeater from 453.550 which we
confirmed on a scanner. This 453.550 frequency is not at the same
site as the repeater (it isn't extremely strong), however there are
many other transmitters
26 matches
Mail list logo
