Need programing information on this radio to setup as a repeater.
Any information is appreciated.73 John
Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
* To unsubscribe from this group, send an email to:
[EMAIL
--- In Repeater-Builder@yahoogroups.com, [EMAIL PROTECTED] wrote:
Hello to the list. Can some one point me to a site where I can get
the
specs for a folded dipole for 2 meter use? Thank you.
Rod KC7VQR
Tons of em,just type in folded dipole for 2 meter in a google search
engine
--- In Repeater-Builder@yahoogroups.com, Kevin Custer [EMAIL PROTECTED]
wrote:
Dave Gingrich wrote:
Ok, I know this sounds silly, but my repeater is now hearing
better
than it transmits.
I would vote for a failure of the Diamond antenna. I would bet
one or
more sets of the
http://home.p07.itscom.net/nob/repeater/poormans_repeater/poormans1.h
tm
Found this on another site .
Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
* To unsubscribe from this group, send an email to:
[EMAIL
I use EchoStation as a repeater, Fast setup for Emergency use or
just in case you need a Repeater or backup.
I started using it while my Repeater was under repairs, liked its
range and audio better so I use it full time now. My Repeater is the
backup for Echostation now.
How ever I do have it
I don't know if anyone has tried the EchoStation software?
But Jonathan Taylor's software will do the trick for a quick and
cheap repeater. I am running it here while my own repeater is under
repair. Using a rigblaster with two kenwood radios without
duplexer's.The audio is clear and strong
--- In Repeater-Builder@yahoogroups.com, [EMAIL PROTECTED] wrote:
Could you please send me info and where I can get the
Jonathan Taylor software.is there a website
Thanks.
Cecil - J73CS
http://www.synergenics.com/sc/
Yahoo! Groups Links
* To visit your group on the web,
If it's the 902Mhz transmitter, think of it as separate functions.
The receivers, output goes to the voter. The output of the voter as
such, can be treated as if it was a single receiver output to be
interfaced with the transmitter/s. (are you going to be simulcasting
on 902 mhz ?).
Audio quality
This Repeater RX series receiver has four boards connecting together
to complete the receiverAS 2 , FM 455 , IF 10.7 , RF 144.
Having trouble with the receiver being to low ,so without the proper
test equipment available to me ,I'm going to tune this the old
fashion way . With an HT in
-
From: kf4vgx [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Wednesday, April 21, 2004 7:49 PM
Subject: [Repeater-Builder] VHF Engineering Repeater
This Repeater RX series receiver has four boards connecting
together
to complete the receiverAS 2 , FM 455 , IF 10.7 , RF
By to low , receive sensitivity , not off freq.
--Well, since you're stuck with the thing... the FM455 is the IF
board.
The RF144 is the front end/1st local oscillator and 1st mixer
board.
If by too low you mean it's off frequency, it should be obvious
which
Ken
Yahoo!
Motorola Mitrek T83JJA3900DK, Can this radio be programed to work as
a repeater ?
Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
* To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
* Your use of
Not real sure if this will help, but Ten mile away may have a loss in
the delay of the audio to the repeater .The distance may causes a bit
of a fuzz sound .
In Repeater-Builder@yahoogroups.com, [EMAIL PROTECTED] wrote:
Hi all
I've been watching the threads on audio reproduction. I would
Well you certainly made me feel more comfortable about this .
Thank you for your reply . Let me read his list of radio's again 73
John KF4VGX
This is typically done to protect the seller from someone not
familiar
with the equipment from shooting both in the foot from one location,
shoot
Yes I agree way to pricie for the average Ham I dont see why we cant
go our on route as we allways have do our own thing :)
--- In Repeater-Builder@yahoogroups.com, Nate Duehr [EMAIL PROTECTED] wrote:
On Feb 9, 2004, at 4:57 PM, kf4vgx wrote:
D-Star information or Moder Repeaters
http://groups.yahoo.com/group/d-star_forum/
Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
* To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
* Your use of Yahoo! Groups is subject to:
of the left over parts
here. Dave -//- NĂ˜ATH
- Original Message -
From: kf4vgx [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Friday, January 30, 2004 4:38 PM
Subject: [Repeater-Builder] Re: Shorten Tail SQ. on older Repeaters
Thanks guys I was looking for an audio
-- OK ill email u in a couple days this one will do 35 watts on a
Byrd. and you right it seems to be a very solid machine and i gotta
say thanks to you and the group for your help .Its Hams like yourself
that brought me to Ham Radio 73 John kf4vgx
contact me at n0ath @ arrl . net about
of people mix up but are two very different things.
--- In Repeater-Builder@yahoogroups.com, kf4vgx [EMAIL PROTECTED]
wrote:
Yes I will have to look again i think the variable is set as low as
it will go look's like 3 to 4 sec. id like it around 1 Ill take
a
peak and see if i looked
Any Ideas for an older repeater SQ tail would like to shorten it.
Yahoo! Groups Links
To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
Your use of Yahoo! Groups is subject to:
73KF4VGX
Yahoo! Groups Links
To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com
The repeater will ID while in use evey 10 min also the Echolink
software has ID and TOT within the software. As I also use
Echostation software for any announcements \ but sounds like a few
good ideas are coming out and I'm still taking notes :)
73 John
, how
22 matches
Mail list logo