80 in for 200 out
--- In Repeater-Builder@yahoogroups.com, Maire-Radios maire-rad...@...
wrote:
what is the input power on the 200 watt Vocom amp?
K+John
- Original Message -
From: n2len
To: Repeater-Builder@yahoogroups.com
Sent: Saturday, August 14, 2010 9:24
It would be best to provide coverage in a 360 pattern...
--- In Repeater-Builder@yahoogroups.com, Matthew Kaufman matt...@... wrote:
Is the desired coverage area perfectly circular?
Matthew Kaufman
n2len wrote:
I was given the opportunity of placing 3 repeater antennas at the very top
load...
These antennas will be top mounted!
Located in the Catskill Mtns, Snow Ice are problems. High winds etc
2: What do you feel about the pattern/reflection with having 3 verticals atop
next to each other spaced say 6 feet apart?
Thank you for your input:
Len N2LEN
Would it make a difference if I lower the high power setting from 45 watts down
to 15 watts to drive a external TPL amplifier or the low power setting from 20
to 15?
Does anyone have either a good used or refurbished VHF 45 watt PA board for a
Motorola R1225?
Thank you...
Kindly E-mail too:
n2...@aol.com
I know this is a long shot...
Does anyone have a Pacific Research PE-3 that they would either sell or trade?
Thank you kindly,
E-mail too:
n2...@aol.com
Hello All,
I just picked up 3 of these amplifiers last night and would like to shift them
down to ham.
(2) UVC 100-10
(1) UVC 200-80
They are currently on 461 mhz.
I haven't looked inside them yet. Is the tuning similar in design to the TPL
with tuning caps to peak for the input and output
bracket that they can offer me?
Thanks...
--- In Repeater-Builder@yahoogroups.com, Yahoo ya...@... wrote:
DB5004S-MTD
Jeff
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of n2len
Sent: Saturday, April 25, 2009 5:16
. Literally right next to
each other. Should it make a dirrerence in polarization if the top of the
antenna clears the top of the tower?
Should we make the tip clear or not?
Input needed
Warm Regards,
Len N2LEN
diameter. There are other kits for larger leg diameters, up to six
inches.
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of n2len
Sent: Saturday, April 25, 2009 1:48 PM
To: Repeater-Builder@yahoogroups.com
Subject
Looking to purchase a Vertex VXR-5000 UHF in perfect working condition.
Please e-mail or simply call:
[EMAIL PROTECTED]
518-653-1287
Does anyone have a single cavity for a Wacom WP678 that they would like
to sell?
If so, please eith e-mail direct or simply call...
Len [EMAIL PROTECTED]
518-653-1287
Can anyone please offer me some assistance.
I am trying to link my VHF repeater to a club machine on 440 MHZ.
For now I received permission to link directly on their input until
the club installs a remote base and yagi next spring.
There repeater is about 20 air miles away. I am using a 5
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItemrd=1item=320303629393
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItemrd=1item=220285469977
Thank you
Please e-mail me directly at:
[EMAIL PROTECTED]
Thanks...
I have a Motorola 4 channel R1225 mobile radio that I am programming to
use. I dont see anyway in the RSS to program pin 8 on the 16 pin
accessory jack.
Will pin 8 on this rig default to COS active low?
Thanks...
Quick question:
I am planning on using a R1225 as a portable repeater.
Can the 16 pin accessory jack on the back of R1225 be wired to the 16
pin accessory jack a GM-300 to use as a link radio?
I want to use a UHF R1225 as a full duplexed repeater with VHF link
radio.
Thanks
I am looking for a used crossband coupler,
Either model
TX/RX 80-05-06.
Telewave TS-1545
DCI Model DCI-146/444-DX-DB
If anyone has one used unit in good shape for sale, please contact me.
Thank you kindly,
[EMAIL PROTECTED]
Hello everyone,
I am looking for a used TX-RX crossband coupler, model 80-05-06. If
anyone has one used unit for sale, please contact me ASAP. Please
e-mail me at [EMAIL PROTECTED]
Thank you.
Motorola GR500 UHF REPEATER
Motorola GR500 Description
Tuned And Aligned For Ham Split Frequency: Motorola R.I.C.K.
Interface, Duplexer, Built-In Power Supply, Battery Backup, Just Plug
In Your UHF Antenna And You Are On The AIR!!!
449.0250/Transmit 444.0250/Receive
PLTone 114.8 Hertz.
Motorola GR500 UHF REPEATER
Motorola GR500 Description
Tuned And Aligned For Ham Split Frequency: Motorola R.I.C.K.
Interface, Duplexer, Built-In Power Supply, Battery Backup, Just
Plug In Your UHF Antenna And You Are On The AIR!!!
449.0250/Transmit 444.0250/Receive
PLTone 114.8
Vertex VXR5000 VHF
1 DC Version and RI310 Controller.
Controller does it all in one neat clean package!
Beautiful Audio and Sensitive RX on hamsplit frequency.
Currently on the air...
Thank you kindly...
Replies to:
[EMAIL PROTECTED]
Cash or Trade?
Looking for HF/VHF/UHF All mode base
Vertex VXR5000 VHF AC Version
Was purchased as a backup
Hamsplit
Stock Controller...
Thank you kindly
Please submit offers to:
[EMAIL PROTECTED]
Of n2len
Sent: Friday, January 12, 2007 6:36 AM
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-Builder] VHF Repeater VXR5000 #2
Vertex VXR5000 VHF AC Version
Was purchased as a backup
Hamsplit
Stock Controller...
Thank you kindly
Please submit offers to:
[EMAIL
Has anyone interfaced a SCOM 7K with a Vertex VXR7000 and was able to
get PL-tones to work?
Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
* To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
*
to
be a software setting,But i have look at the setting till i almost
gone
blind.Like to hear from anyone with a Vertex Repeater that can
helpAnd yes i have called VERTEX 3 times and they have not retrun
my calls..Bobby/N2BR
Thanks,
Len N2LEN
Yahoo! Groups Links
I would like to use a FTL7011 as a remote base rig. Does anyone have
the internal pinouts or points for the signals.
COS
AF audio OUt
Audio IN
PTT
The information that I received is for wiring for an older model 7011.
The control board series I have is 6B.
Any help would be greatly
Hello,
I am presently hooking ua remote base radio to my vxr5000. The 5000 COS
needs a contact closure to make function. I am using a ICOM 207 via 6
pin mini din for signaling. I have used a 2N transistor set up as a
open collector output circuit to trigger the COS on the 5000 repeater.
Hello everyone,
Is there anything over the internet (website) that can be used to plot
a basic approx coverage footprint for a repeater?
I guess it would be some topographical mapping software like
(comscope)...Not sure if thats the correct spelling.
Thanks...
Yahoo! Groups Links
*
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItemitem=5843001065
Thank you...
Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
* To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
* Your use of Yahoo!
PROTECTED] wrote:
TX RX could make you one.
- Original Message -
From: n2len [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Monday, November 14, 2005 8:14 AM
Subject: [Repeater-Builder] Diplexer for UHF/VHF Repeating...
I know that this has been asked before
?
-- Original Message --
Received: Mon, 14 Nov 2005 07:16:05 AM CST
From: n2len [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-Builder] Diplexer for UHF/VHF Repeating...
I know that this has been asked before, but does anyone know of a
commercial diplexer
Mint Like New Condition Very Low Hours!
1: Yaesu VXR7000 UHF Repeater. Retail Cost $1269.99
2: Programming software:
3: Fiplex DVN4522L UHF Duplexers.
4: Advanced Receiver Research UHF Pre-Amp/N connectors
5: Coax RG142 Jumpers N connectors
6: SCOM 7K External Controller
7: Interface Cable for
Does anyone know where i can purchase a cheep aftermarket programmer
for the ge phoenix.
I know i can put one together myself i just dont have the time.
tks,
len
Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
* To
I have to trade
1: Scom 7K
2: TPL UHF 100 Watt repeater amplifier 19 rack mount
thank you,
Len N2LEN
Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
* To unsubscribe from this group, send an email to:
[EMAIL PROTECTED
Hello Everyone,
I am looking for a VHF repeater package.
Looking for a VHF Ham Split repeater like Vertex VXR5000 VHF
hamsplit or Similar
4/6 cavity SINCLAIR type duplexer
Controller not necessary
My budget is $1000.00 including shipping.
Thank you kindly,
73,
Please contact me at:
Combination#DC65UAU88B
VERY CLEAN
GE POWER SUPPLY
AUDIO CONTROL CARD
NEW MASTR II RECEIVE PRE AMP/Needs to be plugged in
HAM SPLIT 444.525 OUTPUT
GE DECIBLE FACTORY DUPLEXER
30 CABINET DOORS LOCKS
SIMPLE VOICE RECORDER ID'er
SPARE UNUSED 100 WATT PA---WILL NOT SEPARATE
SCOM 6K CONTROLLER IF
37 matches
Mail list logo
