Are you sure the number is not a TLE4193A? I believe that is a UHF
circulator.
> --- On Fri, 6/18/10, w9srv wrote:
>
> From: w9srv
> Subject: [Repeater-Builder] What have I got?
> To: Repeater-Builder@yahoogroups.com
> Date: Friday, June 18, 2010, 7:14 PM
>
> Picked up a nice micor UHF r
Sound like a PURC unit.
You have exciter at 450 mw out that goes into a tripler/low level amp that
gives 2W out, that goes into the 75 watt amp which in turn drives the last
stage. Not bing familiar with the model number, I would guesstimate the final
out is around 350 watts.
Dan N8DJP
Tom,
We have several of these 225 watt units in operation 440 MHz.
The correct PA is the 20 watt unit. It looks identical to the 75 watt chassis,
just has fewer circuit boards on the inside. Yes it is overkill for this much
heatsink for 20 watts output power, but one needs to remember that these
Thanks for the Replies so far-
I have found a little info on the unit. It appears to be a 225-250W 450-470
PURC amp. It is supposedly 20-25W in, but I have not found what PA would be the
correct IPA. In the cabinet I found that the amp was bypassed, the unit was
using the 75W pa as the final. I
Thanks for the info Joe- I will check it out.
Tom
W9SRV
--- On Mon, 6/21/10, burkleoj wrote:
From: burkleoj
Subject: [Repeater-Builder] Re: What have I got?
To: Repeater-Builder@yahoogroups.com
Date: Monday, June 21, 2010, 12:56 AM
Tom,
We have several of these 225 watt units in operation
--- In Repeater-Builder@yahoogroups.com, Ronny Julian <[EMAIL PROTECTED]>
wrote:
"...Model # T53RTA1404BA 60W drawer only. ..."
___
The model number translates to: "150.8 - 174 MHz Micor radio set with
wide-spaced transmitter and wide-spaced receiver.
The 68P81014E15 Manual mentioned below is a supplement to the
68P81008E40 manual - you will need both for your radio.
The 68P81008E40 for the basic radio and the 68P81014E15 for the
wide-spaced assemblies. The 14E15 Manual is an interesting study
in itself.
Hope this helps,
N
I recently was given a SYSTEL unit made by Motorola, on 464.../469... with
duplexer and looks to be a repeater, with low level output (2w or so). Would
be great for remote work on GMRS, does anyone on the group have
data/information on this little cutie?
Also I am looking for a schematic for an am
Sent: Wednesday, December 17, 2008 9:37 PM
> To: Repeater-Builder@yahoogroups.com
> Subject: [Repeater-Builder] RE: What Have I got and can I get
information
> about it.
>
> I recently was given a SYSTEL unit made by Motorola, on
464.../469... with
> duplexer and looks to be a repeat
"Rick Beatty" wrote:
>
> I recently was given a SYSTEL unit made by Motorola, on
464.../469... with
> duplexer and looks to be a repeater, with low level output (2w or
so). Would
> be great for remote work on GMRS, does anyone on the group have
> data/information on this little cutie?
>
> Also I
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of Rick Beatty
Sent: Wednesday, December 17, 2008 9:37 PM
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-Builder] RE: What Have I got and can I get information
about it.
I recently was given a SYSTEL unit made by Motorola, on 464.../469... with
.
MIlt
N3LTQ
- Original Message -
From: Rick Beatty
To: Repeater-Builder@yahoogroups.com
Sent: Thursday, December 18, 2008 12:37 AM
Subject: [Repeater-Builder] RE: What Have I got and can I get information
about it.
I recently was given a SYSTEL unit made by Motorola, on 464
much better. Mine work great with GMRS.
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of Rick Beatty
Sent: Thursday, December 18, 2008 12:37 AM
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-Builder] RE: What Have I
@yahoogroups.com
Subject: Re: [Repeater-Builder] RE: What Have I got and can I get
information about it.
Rick,
The Systel was a 2 watt repeater with a telephone interconnect designed for
small on-site systems. I doubt that it would be type accepted for GMRS as
it was based on one or more
Sent: Thursday, December 18, 2008 2:12 PM
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder] RE: What Have I got and can I get
information about it.
Rick,
The Systel was a 2 watt repeater with a telephone interconnect designed for
small on-site systems. I doubt that it wou
Sent: Thursday, December 18, 2008 2:35 PM
Subject: RE: [Repeater-Builder] RE: What Have I got and can I get information
about it.
Huh? Since when is a GP300 not type accepted for GMRS? News to me, but I have
been wrong before. (once!)
-Original Message-
From: Repeater-Builder
>
>
>
> -Original Message-
> From: Repeater-Builder@yahoogroups.com
> [mailto:Repeater-Builder@yahoogroups.com]
> On Behalf Of Rick Beatty
> Sent: Wednesday, December 17, 2008 9:37 PM
> To: Repeater-Builder@yahoogroups.com
> Subject: [Repeater-Builder] RE: What H
17 matches
Mail list logo