At 8/2/2005 03:59 PM, you wrote:
Hi Bob,
The Midland Clegg receivers would be stomped
on like a narc at a biker rally... at most
of the major high level sites where the noise
floor is mostly a disaster and the rf is intense.
Certainly the 13-509 RX doesn't have much front-end filtering. What
At 7/29/2005 08:58 AM, you wrote:
Although the Clegg and Midland 13-509 radio mod to
repeater convertion works ok, the receiver is fairly
marginal for most busy repeater applications. You'd
do much better to buy a receiver designed for actual
repeater operation.
I have to disagree. I maintain 2
Hi Bob,
The Midland Clegg receivers would be stomped
on like a narc at a biker rally... at most
of the major high level sites where the noise
floor is mostly a disaster and the rf is intense.
Nothing like a multi-kw FM Station or two, or
three or five nearby to let you know how good
a
I had an FM76 convered to a 220Mhz repeater and used a GLB preselector in
front of the receiver. It helped a lot. Unfortunately, the GLB is no longer
available.
73, Joe,K1ike
skipp025 [EMAIL PROTECTED] wrote:
Hi Bob,
The Midland Clegg receivers would be stomped
on like a narc
k3phl wrote:
I opted to split a Midland 13-513. The PA runs 20-30 watts, is
synthesized, and has a much better receiver than the drifty and
rather deaf 509. The operating manual also has a full schematic as
well as the point to point wiring between the individual boards. It
even
I built one up and while it worked OK with an external preamp, the crystal drift over temp was always a problem even with a wide temp range crystal and to keep the heat in check, I reduced the power to 10 watts. It worked about 95% with the problem above on dead cold and over 105 temp days.
I opted to split a Midland 13-513. The PA runs 20-30 watts, is
synthesized, and has a much better receiver than the drifty and
rather deaf 509. The operating manual also has a full schematic as
well as the point to point wiring between the individual boards. It
even includes receiver and
Although the Clegg and Midland 13-509 radio mod to
repeater convertion works ok, the receiver is fairly
marginal for most busy repeater applications. You'd
do much better to buy a receiver designed for actual
repeater operation.
I like the preformance and output functions of the
Spectrum
I have a spectrum 220 rec. It worked well in a site by it self. But
once I transferred it to the main site ful of wonderful pager Tx and
other com repeaters in the same site. Forgetaboutit. Regardless of how
much filtering. So we went to a Micor Rec. Problem solved.
Rich/N2ROW
[EMAIL PROTECTED]
Anyone have any experience with the TX-220 by VHF Engineering? I am
debateing building it or just sticking with the FM-76
On 7/29/05, Richard Velez [EMAIL PROTECTED] wrote:
I have a spectrum 220 rec. It worked well in a site by it self. But
once I transferred it to the main site ful of
--- DCFluX [EMAIL PROTECTED] wrote:
Anyone have any experience with the TX-220 by VHF
Engineering? I am
debateing building it or just sticking with the
FM-76
I know of a couple of the VHF Engineering repeaters
that have been on the air for many years. Not too
sure how they would be
11 matches
Mail list logo