There are at least two types of BpBr cavity as well. I have
a homebrew T1504 duplexer using four Moto BpBr cavities.
Two have the slotted 1/2 inch threads and lock nut. The
other two have 1/2 inch mounting threads and no slots; the
threads also do not extend far enough forward from the
Instructor/Examiner
for ECOMM Levels I, II and III.
-Original Message-
From: Steve Rodgers [mailto:[EMAIL PROTECTED]
Sent: Thursday, February 17, 2005 10:22 PM
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder] Source for Moto T1504 duplexer locking nuts?
Hi,
I received
/
Here you go!
Jack
K6YC
- Original Message -
From: mch [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Wednesday, February 16, 2005 1:17 AM
Subject: Re: [Repeater-Builder] Source for Moto T1504 duplexer locking
nuts?
Well, this will give you
, 2005 7:21 PM
Subject: Re: [Repeater-Builder] Source for Moto T1504 duplexer locking nuts?
Hi,
I received these today, and they are way too big! They just slide right
over
the threads. The diameter of the threaded rod is smaller than 1/2. I
measured with my dial calipers and the diameter
removed to keep unwanted hands from helping you out at co-located sites.
Jack
K6YC
- Original Message -
From: Steve Rodgers [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Thursday, February 17, 2005 7:21 PM
Subject: Re: [Repeater-Builder] Source for Moto T1504 duplexer
, 2005 7:21 PM
Subject: Re: [Repeater-Builder] Source for Moto T1504 duplexer locking
nuts?
Hi,
I received these today, and they are way too big! They just slide right
over
the threads. The diameter of the threaded rod is smaller than 1/2. I
measured with my dial calipers and the diameter
At 12:59 PM 2/15/05, you wrote:
I have a Motorola T1504 duplexer in need of 4 locking nuts. The locking
nut part number is 2-10397A06, but a call to Motorola parts indicates the
part number isn't on file. Does anyone have any recommendations for a
substitute part, and do they know what the
AM
Subject: Re: [Repeater-Builder] Source for Moto T1504 duplexer locking nuts?
Well, this will give you the specs on it. It subs to another number, and
that other part is NLA, but the description is still there.
___
Item number. 0210397A06
At 09:02 AM 2/16/05, you wrote:
Jack,
Thanks for the info.
Agreed ! Thanks for looking that up and posting it.
Mike (ILQ) - Maybe add this to the duplexer page on repeater builder?
94830A550
Cadmium-Plated Stl Hex Thin Flex-Top Locknut 1/2-20 Screw
Size, 3/4
://www.mcmaster.com/
Here you go!
Jack
K6YC
- Original Message -
From: mch [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Wednesday, February 16, 2005 1:17 AM
Subject: Re: [Repeater-Builder] Source for Moto T1504 duplexer locking nuts?
Well
I have a Motorola T1504 duplexer in need of 4 locking nuts. The locking nut
part number is 2-10397A06, but a call to Motorola parts indicates the part
number isn't on file. Does anyone have any recommendations for a substitute
part, and do they know what the nut size and thread pitch are for
] Source for Moto T1504 duplexer locking nuts?
I have a Motorola T1504 duplexer in need of 4 locking nuts. The locking
nut part number is 2-10397A06, but a call to Motorola parts indicates the
part number isn't on file. Does anyone have any recommendations for a
substitute part, and do
12 matches
Mail list logo